| 1 |
2023 |
|
Performance Analysis of Arc Rib Fin Embedded in a Solar Air Heater |
Thermal Science and Engineering Progress |
23 |
100891- |
| 2 |
2023 |
|
Spreadsheet analysis of the field-driven start-up flow in a microfluidic channel |
Electrophoresis |
42 |
2465-2473 |
| 3 |
2022 |
|
Magnetowetting Dynamics of Sessile Ferrofluid Droplets: A Review |
Soft Matter |
18 |
2287-2324 |
| 4 |
2022 |
|
Evolution of jets during drop impact on a deep liquid pool |
Physics of Fluids |
34 |
022110-1-022110-10 |
| 5 |
2022 |
|
Transport behaviour of commercial anti-cancer drug protein-bound paclitaxel (Paclicad) in micron-sized channel |
Langmuir |
38 |
2014-2025 |
| 6 |
2022 |
|
Interfacial Dynamics of Viscous Droplets Impacting a Superhydrophobic Candle Soot Surface: Overview and Comparison |
Physics of Fluids |
34 |
012121-1-012121-16 |
| 7 |
2022 |
|
Comparison of different methods for estimating the notch stress intensities at sharp V-notches |
Journal of Mechanics of Materials and Structures |
24 |
369-378 |
| 8 |
2022 |
|
Cylindrical Impacts on GLARE 5 Plates with Open Hole |
Applied Composite Materials |
29 |
953-981 |
| 9 |
2022 |
|
An Approximate Single-Loop Chaos Control Method for Reliability-Based Design Optimization using Conjugate Gradient Search Directions |
Engineering Optimization |
55 |
382-398 |
| 10 |
2022 |
|
Effect of layer orientation on the single tooth bending fatigue strength of polymer gears manufactured by selective laser sintering |
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications |
236 |
- |
| 11 |
2022 |
|
Coupled thermomechanical modelling of shape memory alloy structures undergoing large deformation |
International Journal of Mechanical Sciences |
220 |
107102- |
| 12 |
2022 |
|
A new simple specimen for mixed-mode (I/II) fracture and fatigue tests:Numerical and experimental studies |
European Journal of Mechanics / A Solids |
94 |
104566- |
| 13 |
2022 |
|
Use of industrial waste materials for 3D printing of sustainable concrete: A review |
Journal of Cleaner Production |
340 |
130749- |
| 14 |
2022 |
|
3D concrete printing modelling of thin-walled structures |
Structures |
39 |
496-511 |
| 15 |
2022 |
|
Mesoscopic characterization of bubble dynamics in subcooled flow boiling following a pseudopotential-based approach |
International Journal of Multiphase Flow |
148 |
103923- |
| 16 |
2022 |
|
Characterization of condensation on nanostructured surfaces and associated thermal hydraulics using thermal lattice Boltzmann method |
Phys. Rev. E |
105 |
045308- |
| 17 |
2022 |
|
2D closed form solution for bending of edge bonded dissimilar beams: an application of EKM |
Composite Structures |
289 |
115420- |
| 18 |
2022 |
|
P(VDF-TrFE)/ZnO nanofiber composite based piezoelectric nanogenerator as self-powered sensor: fabrication and characterization |
|
69 |
1662-1679 |
| 19 |
2022 |
|
Fabrication and Characterization of Cu/SiC-Based Axially Functionally Graded Beam |
Advanced Engineering Materials |
24 |
2101239- |
| 20 |
2022 |
|
Engineering Aspects of Incidence, Prevalence, and Management of Osteoarthritis: A Review |
Annals of Biomedical Engineering |
|
- |
| 21 |
2022 |
|
Identification of limiting damping mechanisms in a high quality factor hybrid resonator of space application gyroscope |
|
12 |
119-137 |
| 22 |
2022 |
|
Comparative fretting fatigue life evaluation between critical plane based and deviotoric strain amplitude based methods corrected for surface wear damage |
SAE International Journal of Materials and Manufacturing |
12 |
69-85 |
| 23 |
2022 |
|
Investigations on the trochoidal toolpath for processing the biomaterial through magnetorheological fluid assisted finishing process |
Journal of Manufacturing Processes |
76 |
812-827 |
| 24 |
2022 |
|
Application of Artificial Neural Network for Understanding Multi-Layer Microscale Transport Comprising of Alternate Newtonian and non-Newtonian fluids |
Colloids Surfaces A Physicochem. Eng. Asp |
80 |
35495-35520 |
| 25 |
2022 |
|
Survivability of a particle laden sessile coughed and sneezed droplet subjected to different ambient conditions |
International Journal of Thermal Sciences |
|
- |
| 26 |
2022 |
|
Aerodynamic Investigation of Passer Domesticus Inspired Biomimetic Wing at Low Reynolds number |
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science |
143 |
- |
| 27 |
2022 |
|
Numerical Investigation of Flow Over Oscillating Cambered Foil at Low Reynolds Number |
ASME, Journal of Fluids Engineering |
10 |
58-82 |
| 28 |
2022 |
|
Thermal and flow characteristics of nonequilibrium monatomic, diatomic, and polyatomic gases in cylindrical Couette flow based on second-order non-Navier–Fourier constitutive model |
International Journal of Heat and Mass Transfer |
173 |
108676- |
| 29 |
2022 |
|
Multi-Objective Robust Optimization of Deep Groove Ball Bearings Considering Manufacturing Tolerances Based on Fatigue and Wear Considerations |
ASME, Journal of Tribology |
144 |
- |
| 30 |
2022 |
|
Identification of unbalance characteristics of rotating machinery using a novel optimization-based methodology |
Soft Computing |
|
1-33 |
| 31 |
2022 |
|
An innovative virtual trial misalignment approach for identification of unbalance, sensor and active magnetic bearing misalignment along with its stiffness parameters in a magnetically levitated flexible rotor system |
Mechanical Systems and Signal Processing |
167 |
108540- |
| 32 |
2022 |
|
Experimental visualization and analysis of multiphase immiscible flow in fractured micromodels using micro-particle image velocimetry |
ASME Journal of Energy Resources Technology |
144 |
24501- |
| 33 |
2022 |
|
Composite-inspired multilattice metamaterial structure: An auxetic lattice design with improved strength and energy absorption |
Materials Today Communications |
30 |
103159- |
| 34 |
2022 |
|
Strengthening mechanisms and deformation behavior of industrially-cast and lab-cast dual-phase high entropy alloy |
Metals and Materials International |
29 |
81-94 |
| 35 |
2022 |
|
Extrinsic cohesive zone modeling for interface crack growth: Numerical and Experimental studies |
Engineering Fracture Mechanics |
266 |
108353- |
| 36 |
2021 |
|
Determination of temperature distribution in cold forging with the support of inverse analysis |
Measurement |
187 |
110270-1-110270-10 |
| 37 |
2021 |
|
Discerning the self-healing, shear-thinning characteristics and therapeutic efficacy of hydrogel drug carriers migrating through constricted microchannel resembling blood microcapillary |
Colloids and Surfaces A: Physicochemical and Engineering Aspects |
626 |
127070-1-127070-11 |
| 38 |
2021 |
|
Generating compressive surface residual stresses using hydraulic autofrettage process with heat treatment |
ASME Journal of Pressure Vessel Technology |
143 |
051301-1-051301-15 |
| 39 |
2021 |
|
Increased Reliability of the Technological Torsion Forging Process for Products from Aluminum Alloys |
Journal of Machinery Manufacture and Reliability |
50 |
324-331 |
| 40 |
2021 |
|
Effect of length in rotational autofrettage of long cylinders with free ends |
Proceedings of IMECH-E, Part C: Journal of Mechanical Engineering Science |
236 |
2981-2994 |
| 41 |
2021 |
Mohamed Abbas, Sami Al Issa, Santosha K. Dwivedy |
Event-Triggered Adaptive Hybrid Position-Force Control for Robot-Assisted Ultrasonic Examination System |
Journal of Intelligent & Robotic Systems |
102 |
1-19 |
| 42 |
2021 |
|
Numerical simulations for studying the influence of friction in forging |
Advances in Materials and Processing Technologies |
8 |
2752-2774 |
| 43 |
2021 |
Jyotindra Narayan, Santosha K Dwivedy |
Robust LQR-Based Neural-Fuzzy Tracking Control for a Lower Limb Exoskeleton System with Parametric Uncertainties and External Disturbances |
Applied Bionics and Biomechanics |
https://doi.org/10.1155/2021/5573041 |
1-20 |
| 44 |
2021 |
|
Electrohydrodynamics induced interactions between droplets |
Journal of Fluid Mechanics |
915 |
A88-1-A88-27 |
| 45 |
2021 |
|
Development of a phase change solver for concentrated energy beam applications |
International Communications in Heat and Mass Transfer |
126 |
105469 -1-105469-7 |
| 46 |
2021 |
|
Blockage and cavitation detection in centrifugal pumps from dynamic pressure signal using deep learning algorithm |
Measurement |
173 |
108676- |
| 47 |
2021 |
Jyotindra Narayan, Santosha K Dwivedy |
Preliminary Design and Development of a Low-Cost Lower-Limb Exoskeleton System for Paediatric Rehabilitation |
Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, SAGE Publications |
235 |
530-545 |
| 48 |
2021 |
Jyotindra Narayan, Bhaben Kalita, Santosha Kumar Dwivedy |
Development of Robot-Based Upper Limb Devices for Rehabilitation Purposes: a Systematic Review |
Augmented Human Research |
6 |
1-33 |
| 49 |
2021 |
|
Design of a disk-mandrel assembly for achieving rotational autofrettage in the disk |
Proceedings of IMECH-E, Part C: Journal of Mechanical Engineering Science |
235 |
2452-2467 |
| 50 |
2021 |
|
Cost Comparison of Selective Laser Sintering with Injection Molding in the presence of uncertainties |
Journal of Advanced Manufacturing Systems |
20 |
401-422 |
| 51 |
2021 |
|
Estimation of surface roughness in a turning operation using industrial big data |
International Journal of Machining and Machinability of Materials |
23 |
209-240 |
| 52 |
2021 |
|
Performance study of a sterilization box using a combination of heat and ultraviolet light irradiation for the prevention of COVID-19 |
Environmental Research |
198 |
11309-1-11309-9 |
| 53 |
2021 |
|
Simulation of monotonic loading programs with constant strain rate on a modern universal testing machine |
Technology of Light Alloys |
|
- |
| 54 |
2021 |
|
Numerical Analysis of Conjugate Heat Transfer in a Planar Sudden Expansion Flow |
Journal of The Institution of Engineers (India): Series C |
102 |
981-993 |
| 55 |
2021 |
|
Numerical study of the vortex induced electroosmotic mixing of non-Newtonian biofluids in a non-uniformly charged wavy microchannel: Effect of finite ion size |
Electrophoresis |
42 |
2498-2510 |
| 56 |
2021 |
|
Magnetofluidic mixing of a ferrofluid droplet under the influence of time-dependent external field |
J. Fluid Mech. |
917 |
A15-1-A15-29 |
| 57 |
2021 |
|
Irreversibility analysis of the convective flow through corrugated channels: a comprehensive review |
Eur. Phys. J. Plus |
136 |
1-40 |
| 58 |
2021 |
|
Multifunctional Liquid Marbles to Stabilize and Transport Reactive Fluids |
Soft Matter |
17 |
5084-5095 |
| 59 |
2021 |
|
Mixing in a rotating soft microchannel under electrical double layer effect: A variational calculus approach |
Phys. Fluids |
33 |
062011-1-062011-20 |
| 60 |
2021 |
|
Electro-osmotic Flow through Nanochannel with Different Surface Charge Configurations: A Molecular Dynamics Simulation Study |
Phys. Fluids |
33 |
092115-1-092115-12 |
| 61 |
2021 |
|
Buoyancy driven flow of a couple stress fluid from an isothermal vertical plate: The role of spatially periodic magnetic field |
Physica Scripta |
96 |
- |
| 62 |
2021 |
|
Bejan's flow visualization of buoyancy-driven flow of a hydromagnetic Casson fluid from an isothermal wavy surface |
Phys. Fluids |
33 |
093113-1-093113-17 |
| 63 |
2021 |
|
Simulation of experimental optimization of xylanase production by Penicillium citrinum xym2 by artificial neural network (ANN) |
Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng. |
236 |
- |
| 64 |
2021 |
|
Quantitative model for predicting the imbibition dynamics of viscoelastic fluids in non-uniform microfluidic assays |
Phys. Rev. E |
104 |
055106-1-055106-9 |
| 65 |
2021 |
|
Irreversibility analysis of hybrid nanofluid flow over a rotating disk: Effect of thermal radiation and magnetic field |
Colloids Surfaces A Physicochem. Eng. Asp. |
635 |
- |
| 66 |
2021 |
|
Influence of CNTs on interface delamination resistance in broken ply carbon/CNT-epoxy composites |
Mechanics Based Design of Structures and Machines |
51 |
1189-1200 |
| 67 |
2021 |
|
Qualitative predictions of bone growth over optimally designed macro-textured implant surfaces obtained using NN-GA based machine learning framework |
Medical Engineering & Physics |
95 |
64-75 |
| 68 |
2021 |
|
Influence of sequential opening/closing of interface gaps and texture density on bone growth over macro-textured implant surfaces using FE based mechanoregulatory algorithm |
Computer Methods in Biomechanics and Biomedical Engineering |
25 |
985-999 |
| 69 |
2021 |
|
A Comprehensive Study of Auxiliary Arrangements for Attaining Omnidirectionality in Additive Manufacturing Machine Tools |
ASME, Manufacturing Science and Engineering |
143 |
050802-1-050802-17 |
| 70 |
2021 |
|
GPU-based Matrix-Free Finite Element Solver Exploiting Symmetry of Elemental Matrices |
Computing |
102 |
1941-1965 |
| 71 |
2021 |
|
A Single-Loop Shifting Vector Method with Conjugate Gradient Search for Reliability based-Design Optimization |
Engineering Optimization |
53 |
1044-1063 |
| 72 |
2021 |
|
Reference-Lines-Steered Memetic Multi-Objective Evolutionary Algorithm with Adaptive Termination Criterion |
Memetic Computing |
13 |
49-67 |
| 73 |
2021 |
|
Diversity Preference-based Many-Objective Particle Swarm Optimization Using Reference-Lines-based Framework |
Swarm and Evolutionary Computation |
65 |
1-18 |
| 74 |
2021 |
|
Reference-Lines Steered Guide Assignment and Update For Pareto-Based Many-Objective Particle Swarm Optimization |
Evolutionary Intelligence |
16 |
89-114 |
| 75 |
2021 |
|
Symbolic and Numeric Kernel Division for GPU-based FEA Assembly of Regular Meshes with Modified Sparse Storage Formats |
ASME Journal of Computing and Information Science in Engineering |
21 |
1-12 |
| 76 |
2021 |
|
GPU-based Element-by-Element Strategies for Accelerating Topology Optimization of 3D Continuum Structures Using Unstructured Mesh |
ASME Journal of Computing and Information Science in Engineering |
22 |
1-11 |
| 77 |
2021 |
|
Experimental investigation of Cu-SS electromagnetically assisted adhesive tube-to-tube joining: Its advantages over electromagnetic crimping |
International Journal of Adhesion and Adhesives |
109 |
102908- |
| 78 |
2021 |
|
Electromagnetic Forming and Perforation of Tubes: Modeling, Simulation and Validation |
Journal of Manufacturing Science and Engineering (ASME) |
143 |
61003- |
| 79 |
2021 |
|
Interference-fit joining of Cu-SS composite tubes by electromagnetic crimping for different surface profiles |
Welding in the World |
65 |
1-10 |
| 80 |
2021 |
|
Loose Coupled Simulation Method for FEA of Electromagnetic Forming of Muffler |
Journal of The Institution of Engineers (India) |
102 |
1-10 |
| 81 |
2021 |
|
Effect of metal and polymer mating gears on the bending fatigue performance of asymmetric polymer gears |
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications |
235 |
2324-2339 |
| 82 |
2021 |
|
Comparison of the bending fatigue performances of selective laser sintered and injection moulded nylon spur gears |
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications |
236 |
513-523 |
| 83 |
2021 |
|
Modelling of minor hysteresis loop of shape memory alloy wire actuator and its application in self-sensing |
Smart Materials and Structures |
30 |
- |
| 84 |
2021 |
|
Digital design computing and modelling for 3-D concrete printing |
Automation in Construction |
123 |
103529- |
| 85 |
2021 |
|
Strength Properties of Sustainable Mortar Containing Waste Steel Slag and Waste Clay Brick: Effect of Temperature |
Materials |
14 |
2113- |
| 86 |
2021 |
|
A Concise Review on Interlayer Bond Strength in 3D Concrete Printing |
Sustainability |
13 |
- |
| 87 |
2021 |
|
Fresh and hardened properties of 3D printable polymer fibre-reinforced high-performance cementitious composite |
Advances in Cement Research |
34 |
80-92 |
| 88 |
2021 |
|
Additive Manufacturing of Sustainable Construction Materials and Form-finding Structures: A Review on Recent Progresses |
3D Printing and Additive Manufacturing |
9 |
- |
| 89 |
2021 |
|
Performance of concrete beam reinforced with 3D printed Bioinspired primitive scaffold subjected to three-point bending |
Automation in Construction |
134 |
104060- |
| 90 |
2021 |
|
Biomimicry for 3D concrete printing: A review and perspective |
Additive Manufacturing |
38 |
- |
| 91 |
2021 |
|
Sustainable materials for 3D concrete printing |
Cement and Concrete Composites |
122 |
104156- |
| 92 |
2021 |
|
In-plane energy absorption characteristics of a modified re-entrant auxetic structure fabricated via 3D printing |
Composites Part B: Engineering |
228 |
109437- |
| 93 |
2021 |
|
A Bayesian regularization-backpropagation neural network model for peeling computations |
The Journal of Adhesion |
97 |
1234-1254 |
| 94 |
2021 |
|
Design to operational parameters dependency on quality factor of sensor mechanical resonators |
Journal of Gyroscopy and Navigation |
97 |
952-983 |
| 95 |
2021 |
|
Thermoelastic damping based design, sensitivity study, and demonstration of a functional hybrid gyroscope resonator for high quality factor |
Journal of Gyroscopy and Navigation |
14 |
87-97 |
| 96 |
2021 |
|
On the presence of a critical detachment angle in gecko spatula peeling - a numerical investigation using an adhesive friction model |
The Journal of Adhesion |
14 |
211-234 |
| 97 |
2021 |
|
Investigating the normal and tangential peeling behaviour of gecko spatulae using a coupled adhesion-friction model |
The Journal of Adhesion |
46 |
1-14 |
| 98 |
2021 |
|
Fretting fatigue failure in internal combustion engine components - a review and future scope |
SAE International Journal of Engines |
642 |
128664- |
| 99 |
2021 |
|
NURBS based isogeometric analysis for stable and accurate peeling computations |
Sadhana |
176 |
107525- |
| 100 |
2021 |
|
Activity recognition in video sequences over qualitative abstracts of a diagram-based representation schema |
Journal of Visual Communication and Image Representation |
144 |
- |
| 101 |
2021 |
|
FhVLAD: Fine-grained quantization and encoding high-order descriptor statistics for scalable image retrieval. |
Multimed Tools and Applications |
187 |
122580- |
| 102 |
2021 |
|
Modeling, Analysis, and Identification of Parallel and Angular Misalignments in a Coupled Rotor-Bearing-Active Magnetic Bearing System |
ASME, Journal of Dynamic Systems, Measurement, and Control |
152 |
107454- |
| 103 |
2021 |
|
Dynamic analysis and identification of unbalance and misalignment in a rigid rotor with two offset discs levitated by active magnetic bearings: a novel trial misalignment approach |
Propulsion and Power Research |
45 |
769-786 |
| 104 |
2021 |
|
Finite element modelling, analysis and identification using novel trial misalignment approach in an unbalanced and misaligned flexible rotor system levitated by active magnetic |
Mechanical Systems and Signal Processing |
143 |
- |
| 105 |
2021 |
|
Development of a novel approach for quantitative estimation of rotor unbalance and misalignment in a rotor system levitated by active magnetic bearings |
Iranian Journal of Science and Technology |
22 |
514-537 |
| 106 |
2021 |
|
Multi-strategy Gaussian Harris hawks optimization for fatigue life of tapered roller bearings |
Engineering with Computers |
186 |
110146- |
| 107 |
2021 |
|
Transverse Vibration of Geared-Rotor Integrated With Active Magnetic Bearings in Identification of Multiple Faults |
ASME, Journal of Dynamic Systems, Measurement, and Control |
69 |
1662-1679 |
| 108 |
2021 |
|
Robust design of ball bearings for an improved performance using genetic algorithm |
International Journal for Computational Methods in Engineering Science and Technology |
|
- |
| 109 |
2021 |
|
Identification of inlet pipe blockage level in centrifugal pump over a range of speeds by deep learning algorithm using multi-source data |
Measurement |
186 |
110146- |
| 110 |
2021 |
|
Fault identification in cracked rotor-AMB system using magnetic excitations based on multi harmonic influence coefficient method |
Inverse Problems in Science and Engineering |
29 |
2831-2861 |
| 111 |
2021 |
|
Rocket nozzles: 75 years of research and development |
Sadhana |
46 |
1-22 |
| 112 |
2021 |
|
In the quest of an appropriate turbulence model for analyzing the aerodynamics of a conventional Savonius (S-type) wind rotor |
Journal of Renewable and Sustainable Energy |
13 |
023313-1-023313-10 |
| 113 |
2021 |
|
Increase of efficiency and reduction of CO and NOx emissions in a stationary compression ignition engine run on Mesua Ferrea linn oil-diesel and diethyl ether |
Thermal Science and Engineering Progress |
25 |
100980- |
| 114 |
2021 |
|
Flow characterization of bluff bodies: A 2D transformation from square to triangular cylinder |
ASME Journal of Fluids Engineering |
143 |
110302- |
| 115 |
2021 |
|
A compendium of methods for determining the exergy balance terms applied to reciprocating internal combustion engines |
ASME Journal of Energy Resources Technology |
143 |
120801- |
| 116 |
2021 |
|
Experimental and numerical (EFG method) studies on sedimentary rock under varied salinity conditions |
International Journal of Rock Mechanics and Mining Sciences |
148 |
104909- |
| 117 |
2021 |
|
Probabilistic failure prediction in a double composite cantilever beam with single and double source uncertainty |
Composite Structures |
279 |
114870- |
| 118 |
2021 |
|
Mechanical properties of reservoir rock and caprock under varying brine saturation for application of geological carbon storage in deep saline aquifers |
AIP Proceedings |
2417 |
20025- |
| 119 |
2021 |
|
Experimental Investigation of Structured Packed Bed Liquid Desiccant Dehumidifier: An Optimal Mixture Design of Experiments Strategy |
Int J Refrigeration |
122 |
232-244 |
| 120 |
2021 |
|
Thermochemical energy storage system for cooling and process heating applications: A review. |
Energy Conversion and Management |
229 |
113617- |
| 121 |
2021 |
|
Experimental Investigations on Active Solar Dryers Integrated with Thermal Storage for Drying of Black Pepper |
Renewable Energy. |
167 |
728-739 |
| 122 |
2021 |
|
Hybrid Heat Sinks for Thermal Management of Passively-Cooled Battery Chargers |
Int J of Energy Research |
45 |
6333-6349 |
| 123 |
2021 |
|
Experimental Study on Coupled Heat and Mass Transfer Phenomena between Air and Desiccant in a Solar Assisted Thermal Liquid Desiccant System |
Int J Thermal Sciences |
162 |
106795- |
| 124 |
2021 |
|
Development and Performance Assessment of LPG operated Cluster Porous Radiant Burner for Commercial Cooking and Industrial Applications |
Energy |
219 |
119581- |
| 125 |
2021 |
|
Optimization of Drilling Parameters Using Improved Play-back Methodology |
J Petroleum Science and Engineering |
206 |
108991- |
| 126 |
2021 |
|
Thermal Integration of Proton Exchange Membrane Fuel Cell with Recuperative Organic Rankine Cycle. |
Int J Hydrogen Energy |
46 |
14748-14756 |
| 127 |
2021 |
|
Experimental and Numerical Investigation of Cleaner LPG Combustion in a Novel Clustered Porous Radiant Burner |
J Cleaner Production |
308 |
27276- |
| 128 |
2021 |
|
Parametric Studies on MmNi4.7Fe0.3 based Reactor with Embedded Cooling Tubes for Hydrogen Storage and Cooling Applications |
J Energy Storage |
35 |
102317- |
| 129 |
2021 |
|
Performance Assessments and Techno and Enviro-Economic Analyses on Forced Convection Mixed Mode Solar Dryer |
J Food Process Engineering |
44 |
13675- |
| 130 |
2021 |
|
Compound charging and discharging enhancement in multi-PCM system using non-uniform fin distribution |
Renewable Energy. |
171 |
299-314 |
| 131 |
2021 |
|
Strategies for scaling-up LaNi5-based hydrogen storage system with internal conical fins and cooling tubes |
Int J Hydrogen Energy |
46 |
19031-19045 |
| 132 |
2021 |
|
Role of hybrid-nanofluid in heat transfer enhancement – A review |
Int Communications in Heat and Mass Transfer |
125 |
105341- |
| 133 |
2021 |
|
Performance Comparison of Evacuated U-Tube Solar Collector Integrated Parabolic Reflector with Conventional Evacuated U-Tube Solar Collector |
Sadhana |
46 |
137- |
| 134 |
2021 |
|
Evaluation of Structural Integrity of Tubulars in Directional Wellbores: A Case Study in North-Eastern Parts of India |
|
207 |
109067- |
| 135 |
2021 |
|
A Review on Solar Greenhouse Dryer: Design, Thermal Modelling, Energy, Economic and Environmental Aspects |
Solar Energy |
229 |
3-21 |
| 136 |
2021 |
|
Experimental and Numerical Investigations on the Charging and Discharging Performances of High-Temperature Cylindrical Phase Change Material Encapsulations |
Solar Energy |
224 |
411-424 |
| 137 |
2021 |
|
A Review on Solar Dryers Integrated with Thermal Energy Storage Units for Drying Agricultural and Food Products |
Solar Energy |
229 |
22-38 |
| 138 |
2021 |
|
Performance Studies on Mixed-Mode Forced Convection Solar Cabinet Dryer under Different Air Mass Flow Rates for Drying of Cluster Fig |
|
229 |
39-51 |
| 139 |
2021 |
|
Experimental investigations of high-temperature shell and multi-tube latent heat storage system |
Applied Thermal Engineering |
198 |
11749- |
| 140 |
2021 |
|
Fabrication, Characterization and Evaluation of Desiccant Doped Hydrogel Films for Potential Air-Dehumidification Applications |
J Applied Polymer Science |
139 |
51607- |
| 141 |
2020 |
Amit Prakash Ozarde, Jyotindra Narayan, Dipak Yadav, Gene H McNay, Sachin Gautam |
Optimization of Diesel Engine’s Liner Geometry to Reduce Head Gasket’s Fretting Damage |
SAE International Journal of Engines |
14 |
81-97 |
| 142 |
2020 |
Jyotindra Narayan, Santosha Kumar Dwivedy |
Towards Neuro-Fuzzy Compensated PID Control of Lower Extremity Exoskeleton System for Passive Gait Rehabilitation |
IETE Journal of Research |
|
1-18 |
| 143 |
2020 |
U.S. Dixit, P.M. Pandey and G.C. Verma |
Ultrasonic-assisted machining processes: A review |
Ultrasonic-assisted machining processes: A review |
12 |
227-254 |
| 144 |
2020 |
Sarma, B., Shahapure, V., Dalal, A., and Basu, D. N. |
Magnetowetting Dynamics of Sessile Ferrofluid Drops on Soft Surfaces |
Soft Matter |
16 |
970-982 |
| 145 |
2020 |
A. Kumar and S. K. Kakoty |
Effect of Couple Stress Parameter on Steady State and Dynamic Characteristics of Three-Lobe Journal Bearing Operating on TiO2 Nanolubricant |
Journal of Engineering Tribology, |
234 |
528-540 |
| 146 |
2020 |
A Kumar and S K Kakoty |
Effect of couple-stress parameter on the steady state performance parameters of two-lobe journal bearing operating with non-Newtonian lubricant |
Materials Today: Proceedings |
24P2 |
453-462 |
| 147 |
2020 |
Bhaben Kalita, Jyotindra Narayan, Santosha Kumar Dwivedy |
Development of Active Lower Limb Robotic-Based Orthosis and Exoskeleton Devices: A Systematic Review |
International Journal of Social Robotics |
|
1-19 |
| 148 |
2020 |
U Talukdar, Shyamanta M Hazarika, John Q Gan |
Adaptation of Common Spatial Patterns based on mental fatigue for motor-imagery BCI. |
Biomedical Signal Processing and Control |
58 |
- |
| 149 |
2020 |
Srinivas R Gorthi, Pranab Kumar Mondal, Gautam Bisaws and Kirti Sahu |
Electro-capillary filling in a microchannel under the influence of magnetic and electric fields |
Canadian Journal of Chemical Engineering |
|
- |
| 150 |
2020 |
Jyotindra Narayan, Shivansh Mishra, Gaurav Jaiswal, Santosha K Dwivedy |
Novel design and kinematic analysis of a 5-DOFs robotic arm with three-fingered gripper for physical therapy |
Materials Today: Proceedings |
28 |
2121-2132 |
| 151 |
2020 |
S.Shyama, M. Asfer, B. Mehta, P. K.Mondal and Z. A. Almutairid |
Magnetic field driven actuation of sessile ferrofluid droplets in the presence of a time dependent magnetic field |
Colloids and Surfaces A: Physicochemical and Engineering Aspects |
586 |
124116-1-124116-12 |
| 152 |
2020 |
K K Basumatary, G Kumar, K Kalita, and S K Kakoty |
Stability Analysis of Rigid Rotors Supported by Gas Foil Bearings Coupled with Electromagnetic Actuators |
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science |
234 |
427-443 |
| 153 |
2020 |
R Bhattacharyya, Shyamanta M Hazarika |
A knowledge-driven layered inverse reinforcement learning approach for recognizing human intents. |
Journal of Experimental & Theoretical Artificial Intelligence |
Online First |
- |
| 154 |
2020 |
Sagar Pawar, Sachin D Kore, Arup Nandy |
Comparison of Sheared Edge Zones Developed in Electromagnetic and Quasistatic Dieless Perforation |
J. of Materi Eng and Perform |
29 |
1146-1155 |
| 155 |
2020 |
A. Raj, A. Ch. Borsaikia and U.S. Dixit |
Bond strength of Autoclaved Aerated Concrete (AAC) masonry using various joint materials |
Journal of Building Engineering |
28 |
101039-1-101039-10 |
| 156 |
2020 |
A. Singh, P. Bind, P. Kumari |
2D free vibration solution of the hybrid piezoelectric laminated beams using extended Kantorovich method |
Journal of The Institution of Engineers (India): Series C |
101 |
1-12 |
| 157 |
2020 |
Fenil D, Asonganyi A, Sunku Prasad J, Muthukumar P, Muhammad R, Eylem A |
Experimental Studies on Endothermic Reversible Reaction of Salts for Cooling |
Heat Transfer Engineering. |
|
- |
| 158 |
2020 |
J. Zhang, M. Wu, Q. Peng, U.S. Dixit and P. Gu |
Design for interface stiffness of mechanical products using integrated simulation and optimization under uncertainty |
ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems Part B: Mechanical Engineering |
6 |
21006-1-21006-10 |
| 159 |
2020 |
Jasinta P Ekka, Krishnendu B, Muthukumar P, Dipak Kumar K |
Performance analysis of a forced convection mixed mode horizontal solar cabinet dryer for drying of black ginger (Kaempferia parviflora) using two successive air mass flow rates. |
Renewable Energy |
152 |
66- |
| 160 |
2020 |
Mrinal Bhowmik, Muthukumar P, Anandalakshmi R |
Experimental based multilayer perceptron approach for prediction of evacuated solar collector performance in humid subtropical regions |
Renewable Energy |
143 |
1566-1580 |
| 161 |
2020 |
P. K. Bannaravuri, A. K. Birru and U. S. Dixit |
Effect of laser surface melting on the surface integrity of aluminium composites |
Transactions of Nonferrous Metals Society of China |
30 |
344-362 |
| 162 |
2020 |
Suman Saurav, Sridhar P. V. S. S., Biswas Pankaj, Deepjyoti Das |
Prediction of welding induced distortions in large weld Structure through Improved Equivalent Load Method Based on Average Plastic Strains |
Welding in the World |
64 |
179-200 |
| 163 |
2020 |
Atul K Soti, Ashoke De |
Vortex-induced Vibrations of a Confined Circular Cylinder for Efficient Flow Power Extraction |
Physics of Fluids |
32, 033603 |
- |
| 164 |
2020 |
Prakash Kumar Sahu, Jayashree Das, Gaoqiang Chen, Qu Liu, Sukhomay Pal, Shenbo Zeng, Qingyu Shi |
Friction stir selective alloying of different Al% particulate reinforced to AZ31 Mg for enhanced mechanical and metallurgical properties |
Journal of Materials Science and Engineering: A |
774 |
- |
| 165 |
2020 |
V. Kumar and U.S. Dixit |
Estimation of temperature-dependent yield strength and modulus of elasticity during laser bending |
Measurement |
154 |
107515-1-107515-11 |
| 166 |
2020 |
Pandey, V., Deka, H., Biswas, G., and Dalal, A. |
Dynamics of Growth and Break-up of an Evaporating Pendant Drop |
ASME Journal of Heat Transfer |
142 |
021601-1-021601-8 |
| 167 |
2020 |
Mishra R., Soti A. K., Thompson, M. C., Bhardwaj R., Kukarni S. S. |
Vortex-induced vibration of a circular cylinder on viscoelastic support at low Reynolds number |
Journal of Fluid and Structures |
95, 102997 |
- |
| 168 |
2020 |
A. Gagoi, A. Reddy Katha and P. K. Mondal |
Influence of the Presence of the Cations on the Water and Salt Dynamics Inside Layered Graphene Oxide (GO) Membranes |
Nanoscale (Royal Society of Chemistry) |
12 |
7273-7283 |
| 169 |
2020 |
A. Jat and Tiwari R. |
Multi-Objective Optimization of Spherical Roller Bearings Based on Fatigue and Wear Using Evolutionary Algorithm |
Journal of King Saud University – Engineering Sciences |
32 |
58-68 |
| 170 |
2020 |
A. Raj, A. Ch. Borsaikia and U.S. Dixit |
Evaluation of mechanical properties of autoclaved aerated concrete (AAC) block and its masonry |
Journal of Institution of Engineers (India), Series A |
DOI :10.1007/s40030-020-00437-5 |
- |
| 171 |
2020 |
Bukke Kiran Naik, Muthukumar P |
Parametric and Performance Investigations on Novel Multipurpose Liquid Desiccant Drying/Desalination System. |
Heat Transfer Engineering |
|
- |
| 172 |
2020 |
Chilaka RCR, Vigneshwaran K, Hakeem Niyas, Muthukumar, P |
Performance investigation of lab-scale sensible heat storage prototypes, Article in Press |
Int Journal Green Energy |
|
- |
| 173 |
2020 |
H Basumatary, Shyamanta M Hazarika |
State of the Art in Bionic Hands. |
IEEE Transactions on Human-Machine Systems |
50 |
- |
| 174 |
2020 |
Kiran Naik, Bharat Singh, Neelam Dutta, Senthilmurugan S. Muthukumar P |
Fluid to liquid membrane energy exchanger for simultaneous liquid desiccant regeneration and desalination applications–Theoretical and experimental analyses. |
Energy Conversion and Management |
204 (15) |
112291- |
| 175 |
2020 |
Mrinal Bhowmik Anandalakshmi R, Muthukumar P |
Numerical Investigation of Performance Trade-Off Characteristics of a Packed Bed Dehumidifier using Aqueous Blends of Lithium Chloride and Calcium Chloride |
Heat and Mass Transfer |
|
- |
| 176 |
2020 |
Sajan Kapil, Fisseha Legesse, Seema Negi, K. P. Karunakaran, and Swarup Bag |
Hybrid layered manufacturing of a bimetallic injection mold of P20 tool steel and mild steel with conformal cooling channels |
Progress in Additive Manufacturing |
doi.org/10.1007/s40964-020-00129-3 |
- |
| 177 |
2020 |
Sangjukta Devi, Niranjan Sahoo and P. Muthukumar |
Experimental studies on biogas combustion in a novel double layer inert porous radiant burner |
Renewable Energy |
149 |
1040-1052 |
| 178 |
2020 |
Sunku Prasad J, Anandalakshmi R, Muthukumar P |
Numerical Investigation on Conventional and PCM Heat Sinks under Constant and Variable Heat Flux Conditions. |
Clean Technologies and Environmental Policy. |
|
- |
| 179 |
2020 |
S Jain and U K Saha |
Capturing the dynamic stall in H-type Darrieus wind turbines using different URANS turbulence models |
ASME Journal of Energy Resources Technology |
142 |
091302-1-091302-13 |
| 180 |
2020 |
A Chanda, SK Dwivedy |
A Study of Nonlinear Behavior of Flexible Tool and Workpiece in Turning Operation With Regenerative Effect Under Internal and Primary Resonance Conditions |
ASME, Journal of Computational and Nonlinear Dynamics |
15 |
61004-61015 |
| 181 |
2020 |
Upasana Sarma, Shrikrishna N. Joshi |
Machining of micro-channels on polycarbonate by using Laser-Induced Plasma Assisted Ablation (LIPAA) |
Optics & Laser Technology |
128 |
- |
| 182 |
2020 |
A Karthik Pandian, Sachin Singh Gautam, S Senthilvelan |
Experimental and numerical investigation of the bending fatigue performance of symmetric and asymmetric polymer gears |
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications |
https://doi.org/10.1177/1464420720909486 |
- |
| 183 |
2020 |
U Talukdar, Shyamanta M Hazarika, John Q Gan |
Adaptive feature extraction in EEG-based motor imagery BCI: tracking mental fatigue. |
Journal of Neural Engineering |
17 |
- |
| 184 |
2020 |
Sanghamitra Das, Shrikrishna N. Joshi |
Estimation of wire strength based on residual stresses induced during wire electric discharge machining |
Journal of Manufacturing Processes |
53 |
406-419 |
| 185 |
2020 |
Agyapal Singh and Poonam Kumari |
Analytical free vibration solution for angle-ply piezolaminated plate under cylindrical bending: A piezo-elasticity approach |
Advances in Computational Design |
5 |
55-89 |
| 186 |
2020 |
Anil Kumar Rout, Niranjan Sahoo and Pankaj Kalita |
Effectiveness of coaxial surface junction thermal probe for transient measurements through laser based heat flux assessment |
Heat and Mass Transfer |
56 |
1141-1152 |
| 187 |
2020 |
G. C. Subramaniam and P. K. Mondal |
Effect of Couple Stresses on the Rheology and Dynamics of Linear Maxwell Viscoelastic Fluids |
Physics of Fluids |
32 |
013108-1-013108-14 |
| 188 |
2020 |
Kashyap D, Gaur SS, Kanagaraj S |
Development of hybrid shape memory polyurethane composites for endovascular applications. |
Materials Today Communications |
22 |
100751- |
| 189 |
2020 |
Naskar S, Panda AK, Jana A, Kanagaraj S, Basu B. |
UHMWPE-MWCNT-nHA based hybrid trilayer nanobiocomposite: Processing approach, physical properties, stem/bone cell functionality, and blood compatibility. |
J Biomed Mater Res.Part B Applied Bjiomaterials |
|
1-24 |
| 190 |
2020 |
P. K. Mondal and S. Wongwises |
Magneto-Hydrodynamic (MHD) Micropump of Nanofluids in a Rotating Microchannel under Electrical Double Layer Effect |
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering |
DOI: 10.1177/0954408920921697 |
- |
| 191 |
2020 |
Pardeep Pankaj, Avinish Tiwari, Pankaj Biswas, A. Gourav Rao & Sukhomay Pal |
Experimental studies on controlling of process parameters in dissimilar friction stir welding of DH36 shipbuilding steel˗AISI 1008 steel |
Welding in the World |
doi.org/10.1007/s40194-020-00886-3. |
- |
| 192 |
2020 |
Santosh Kumar Hotta, Niranjan Sahoo, Kaustubha Mohanty and Vinayak Kulkarni |
Ignition timing and compression ratio as effective means for the improvement in the operating characteristics of a biogas fueled spark ignition engine |
Renewable Energy |
150 |
854-867 |
| 193 |
2020 |
Saurav Suman, Pankaj Biswas |
Comparative Study on SAW Welding Induced Distortion and Residual Stresses of CSEF Steel Considering Solid State Phase Transformation and Preheating |
Journal of Manufacturing Processes |
50 |
19-30 |
| 194 |
2020 |
Saurav Suman, Pankaj Biswas, S. K. Patel, V. P. Singh, Akhileshwar Nirala, Basil Kuriachen, |
Measurement of Residual Stresses in Submerged Arc Welded P91 Steel Using Surface Deformation |
Materials Todays- proceedings |
21 |
1707-1712 |
| 195 |
2020 |
Shranish Kar, Poonam Kumari |
Three-dimensional analytical solution of arbitrarily supported cylindrical panels with weak interfaces using the extended Kantorovich method |
Composite Structures |
236 |
111802- |
| 196 |
2020 |
A Sarkar and U K Saha |
Assessment of dual fuel diesel engine performance by modulating biogas flowrate and intake charge preheating |
International Journal of Ambient Energy |
|
1-8 |
| 197 |
2020 |
S. Sajith, K.S.R.K. Murthy and P.S. Robi |
Mixed mode fatigue crack growth studies in AISI 316 stainless steel |
European Journal of Mechanics / A Solids |
80 |
103898- |
| 198 |
2020 |
S. Sajith, K.S.R.K. Murthy and P.S. Robi |
Experimental and numerical investigation of mixed mode fatigue crack growth models in aluminum 6061-T6 |
International Journal of Fatigue |
130 |
105285- |
| 199 |
2020 |
Sanasam Sunderlal Singh, Alika Khare, Shrikrishna N. Joshi |
Fabrication of microchannel on polycarbonate below the laser ablation threshold by repeated scan via the second harmonic of Q-switched Nd:YAG laser |
SME Journal of Manufacturing Processes |
55 |
359-372 |
| 200 |
2020 |
Pallekonda R. B., Nanda S. R., Dwivedy S. K. |
Application of Neural-Networks and Neuro-Fuzzy Systems for the Prediction of Short Duration Forces Acting on the Blunt Bodies |
Soft Computing |
|
- |
| 201 |
2020 |
S. K. Barik, R. G. Narayanan and N. Sahoo |
Forming response of AA5052-H32 sheet deformed using a shock tube |
Transactions of Nonferrous Metals Society of China |
30 |
603-618 |
| 202 |
2020 |
S. Pandian, S. L. N. Desikan and Sahoo Niranjan |
Onset of cavity oscillation from transverse to longitudinal mode in a supersonic flow |
ASME Journal of Fluids Engineering |
142 |
1-10 |
| 203 |
2020 |
S. Pandian, S. L. N. Desikan and Sahoo Niranjan |
Non-linear characteristics of a rectangular cavity in supersonic flow |
AIAA Journal |
58 |
1206-1215 |
| 204 |
2020 |
Satyaki Chandra, Pratibha Sharma, Muthukumar P, Sankara Sarma VT |
Modeling and numerical simulation of a 5 kg LaNi5-based hydrogen storage reactor with internal conical fins. |
Int J Hydrogen Energy |
45 |
8794-8809 |
| 205 |
2020 |
Saurav Suman, Pankaj Biswas and Avinish Tiwari |
Microstructure Evolution and Mechanical Behaviour of SAW Welded CSEF Steel on Preheating and PWHT, |
Transactions of the Indian Institute of Metals |
doi.org/10.1007/s12666-020-01961-5 |
- |
| 206 |
2020 |
Saurav Suman, Biswas Pankaj, Basil Kuriachen and Abhijit Sinha |
Thermo-mechanical study of single and multi-pass welding of CSEF steel for residual stresses and deformations considering solid state phase transformation |
Materials Todays- proceedings |
doi.org/10.1016/j.matpr.2019.12.299. |
- |
| 207 |
2020 |
S Jain and U K Saha |
The state-of-the-art technology of H-type Darrieus wind turbine rotors |
ASME Journal of Energy Resources Technology |
142 |
030801-1-030801-25 |
| 208 |
2020 |
Bhaben Kalita and S. K. Dwivedy |
Numerical Investigation of Nonlinear Dynamics of a Pneumatic Artificial Muscle With Hard Excitation |
ASME, Journal of Computational and Nonlinear Dynamics |
15 |
41003-41025 |
| 209 |
2019 |
Anshul Garg and Santosha K. Dwivedy |
Piezoelectric energy harvester under parametric excitation: A theoretical and experimental investigation |
Journal of Intelligent Material Systems and Structures |
31 |
612-631 |
| 210 |
2019 |
J. S. Rapur and R. Tiwari |
On-line Time Domain Vibration and Current Signals Based Multi-Fault Diagnosis of Centrifugal Pumps using Support Vector Machines |
Journal of Nondestructive Evaluation |
38 |
1-18 |
| 211 |
2019 |
S. Gorthi, H.S. Gaikwad, P. K. Mondal and G. Biswas |
Surface Tension Driven Filling in a Soft Microchannel: Role of Streaming Potential |
Industrial and Engineering Chemistry Research (ACS) |
59 |
3839-3853 |
| 212 |
2019 |
R. S. Srinivas, R. Tiwari and Ch. K. Babu |
Model Based Analysis and Identification of Multiple Fault Parameters in Coupled Rotor Systems with Offset Discs in the Presence of Angular Misalignment and Integrated with an Active Magnetic Bearing |
Journal of Sound & Vibration |
450 |
109-140 |
| 213 |
2019 |
R. Vignesh Babu, S. Kanagaraj |
Sintering behaviour of Copper/Carbon nanotube composites and their characterization |
Advanced Powder Technology |
30 |
2200-2210 |
| 214 |
2019 |
Raghavendra Rohit Dabbara and R. Tiwari |
Strength-Wear-Thermal Based Multi-Objective Geometric Design Optimization of Cylindrical Roller Bearings using Genetic Algorithms |
Machine Design |
11 |
113-130 |
| 215 |
2019 |
A. Chaudhari, S. K. Hotta, N. Sahoo and V. Kulkarni |
Effect of vertical location of the spark plug on the performance of a raw biogas fueled variable compression ratio spark ignition engine |
Energy and Enviornment |
30 |
1313-1338 |
| 216 |
2019 |
A. Raj, A. Ch. Borsaikia and U.S. Dixit |
Compressive and shear bond strengths of grooved AAC blocks and masonry |
Materials and Structures |
52 |
116-1-116-11 |
| 217 |
2019 |
Dipendra K. Roy and R. Tiwari |
Estimation of the Internal and External Damping from the Forward and Backward Spectrum of a Rotor with a Fatigue Crack |
Propulsion and Power Research |
9 |
62-74 |
| 218 |
2019 |
Dipendra K. Roy and R. Tiwari |
Experimental Identification of Rotating and Stationary Damping in a Cracked Rotor System with an Offset Disc |
Archive in Mechanical Engineering |
66 |
447-474 |
| 219 |
2019 |
F. Sharma and U.S. Dixit |
Fuzzy set based cost model of additive manufacturing with specific example of selective laser sintering |
Journal of Mechanical Science and Technology |
33 |
4439-4449 |
| 220 |
2019 |
J. Shruti Rapur and R. Tiwari |
Multi-fault diagnosis of combined hydraulic and mechanical centrifugal pump faults using continuous wavelet transform and support vector machines |
ASME, Journal of Dynamic Systems, Measurement and Control |
141 |
111013-1-11013-14 |
| 221 |
2019 |
Kotoky, S., Dalal, A., and Natarajan, G. |
A Computational Analysis of the Role of Particle Diameter on the Fluidization Behavior in a Bubbling Gas-Solid Fluidized Bed |
Computational Particle Mechanics |
|
- |
| 222 |
2019 |
P. Gangsar and R. Tiwari |
On-line Diagnostics of Mechanical and Electrical Faults in Induction Motor using Multiclass Support Vector Machine Algorithms based on Frequency Domain Vibration and Current Signals |
ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering |
5 |
031001-1-031001-15 |
| 223 |
2019 |
S. Pati, P.K. Mondal |
Limiting thermal characteristics for flow of non-Newtonian fluids between asymmetrically heated parallel plates: An analytical study |
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering |
233 |
880-892 |
| 224 |
2019 |
Susant Behera, Poonam Kumari |
Analytical piezoelasticity solution for natural frequencies of levy-type piezolaminated plates |
International Journal of Applied Mechanics |
11 |
1950023- |
| 225 |
2019 |
Thirumalaisamy, R., Natarajan, G., and Dalal, A. |
Comment on a “Modifications to the Gradient Schemes on Unstructured Cell Centered Grids for the Accurate Determination of Gradients near Conductivity Changes” |
Physics of Fluids |
31 |
129101-1-129101-4 |
| 226 |
2019 |
Tiwari Avinish, Pardeep Pankaj, Biswas Pankaj, Kore S. D. and Pal Sukhomay |
Effect of tool offset and rotational speed in dissimilar friction stir welding of AISI 304 stainless steel and mild steel |
Journal of Materials Engineering and Performances |
28 |
6379- |
| 227 |
2019 |
Microstructure and Work Hardening Behaviour of Micro Plasma Arc Welded AISI 316L Sheet Joint |
Microstructure and Work Hardening Behaviour of Micro Plasma Arc Welded AISI 316L Sheet Joint |
Journal of Materials Engineering and Performance |
28 |
2588-2599 |
| 228 |
2019 |
R S Reddy, S Panda and A Gupta |
Nonlinear dynamics of an inclined FG pipe conveying pulsatile hot fluid |
International Journal of Non-Linear Mechanics |
118 |
103276- |
| 229 |
2019 |
D. K. Biswal, D. Bandopadhya and S. K. Dwivedy |
A Non-Linear Dynamic Model of Ionic Polymer-Metal Composite (IPMC) Cantilever Actuator |
International Journal of Automotive and Mechanical Engineering |
16 |
6332-6347 |
| 230 |
2019 |
Sibananda Mohanty and S. K. Dwivedy |
Nonlinear Vibration Absorber for a Nonlinear System with a Time Delay Acceleration Feedback under the Internal Resonance, Subharmonic, Superharmonic and Principal Parametric Resonance Conditions Simultaneously |
|
13 |
9-15 |
| 231 |
2019 |
S. Arun, Balaphrang Marbaniang, Bhaskar Borgohain & S. Kanagaraj. |
Rehabilitation evaluation of the newly developed polymeric based passive polycentric knee joint |
Disability and Rehabilitation: Assistive Technology |
DOI: 10.1080/17483107.2019.1621955 |
- |
| 232 |
2019 |
A. Misra, P.M. Pandey, U.S. Dixt, A. Roy and V.V. Silberschmidt |
Multi-objective optimization of ultrasonic-assisted magnetic abrasive finishing process |
International Journal of Advanced Manufacturing Technology |
101 |
1661-1670 |
| 233 |
2019 |
M. Kumar, Sachin S. Gautam, and P. M. Dixit |
Non-linear ductile damage growth law at elevated temperature |
Sadhana |
44 |
17- |
| 234 |
2019 |
S. Pandian, S. L. N. Desikan and Sahoo Niranjan |
Onset of transient shock interaction with cavity shear layer |
AIAA Journal |
57 |
-3773 |
| 235 |
2019 |
A. J. Chaudhari, S. K. Hotta, N. Sahoo and V. Kulkarni |
Combined impact of compression ratio and re-circulated exhaust gas on the performance of a biogas fueled spark ignition engine |
Journal of Renewable and Sustainable Energy |
11 |
013104(1)-013104(15) |
| 236 |
2019 |
Deepak Sharma, and Pradyumn K. Shukla |
Line-Prioritized Environmental Selection and Normalization Scheme for Many-Objective Optimization using Reference-Lines-based Framework |
Swarm and Evolutionary Computation |
51 |
100592- |
| 237 |
2019 |
Dehury, P., Chaudhary R. K., Banerjee, T., and Dalal, A. |
Evaluation of Thermophysical Properties of Menthol-Based Deep Eutectic Solvent as a Thermal Fluid: Forced Convection and Numerical Studies |
Industrial & Engineering Chemistry Research |
58 |
20125-20133 |
| 238 |
2019 |
Nada Barakat and Deepak Sharma |
Evolutionary Multi-Objective Optimization for Bulldozer and its Blade in Soil Cutting |
International Journal of Management Science and Engineering Management |
14 |
102-112 |
| 239 |
2019 |
Sarma, B., Shahapure, V., Dalal, A., and Basu, D. N. |
Experimental Characterization of the Growth Dynamics During Capillarity-Driven Generation |
Physical Review E |
100 |
013106-1-013106-12 |
| 240 |
2019 |
Sidhartha Das, Asis Giri, Sutanu Samanta, and S. Kanagaraj. |
An experimental investigation of properties of nano-fluid and its performance on thermosyphon cooled by natural convection |
Transactions of the ASME Journal of Thermal Science and Engineering Applications |
11 |
044501-1-044501-9 |
| 241 |
2019 |
Vishnu VT, Arnab Kr. De, P.K. Mishra |
Significance of Prandtl Number on the Heat Transport and Flow Structure in Rotating Rayleigh–Bénard Convection |
ASME J. Heat Transfer |
142 |
1-10 |
| 242 |
2019 |
Tiwari Avinish, Pardeep Pankaj, Biswas Pankaj, Kore S. D. & Gourav Rao A. |
Tool performance evaluation of friction stir welded shipbuilding grade DH36 steel butt joints |
International Journal of Advanced Manufacturing Technology |
103 |
1989-2005 |
| 243 |
2019 |
Sibananda Mohanty and S. K. Dwivedy |
Nonlinear Dynamics of Piezoelectric based Active Nonlinear Vibration Absorber using Time Delay Acceleration Feedback |
Nonlinear Dynamics |
98 |
1465-1490 |
| 244 |
2019 |
Kashyap, D., Dass, A.K. |
Effect of boundary conditions on heat transfer and entropy generation during two-phase mixed convection hybrid Al 2 O 3 -Cu/water nanofluid flow in a cavity |
International Journal of Mechanical Sciences |
157-158 |
45-58 |
| 245 |
2019 |
Seema Negi, A. A. Nambolan, Sajan Kapil, Prathamesh S. Joshi, R. Manivannan, K. P. Karunakaran, and Parag Bhargava |
Review on electron beam based additive manufacturing |
Rapid Prototyping Journal |
26 |
485-498 |
| 246 |
2019 |
Satyajit Panda and M K Dubey |
A balanced laminate of piezoelectric fiber composite for improved shear piezoelectric actuation of beams |
Mechanics of Advanced Materials and Structures |
|
1-13 |
| 247 |
2019 |
Avilash Sahoo, Santosha K. Dwivedy and P. S. Robi |
Advancements in the field of autonomous underwater vehicle |
Ocean Engineering |
181 |
145-160 |
| 248 |
2019 |
Kumar, Raushan, and Anoop K. Dass. |
A new flux‐limiting approach–based kinetic scheme for the Euler equations of gas dynamics |
International Journal for Numerical Methods in Fluids |
|
22-56 |
| 249 |
2019 |
Sunku Prasad J, Muthukumarar, P, Fenil Desai, Dipankar N. Basu, Muhammad M. Rahman. |
A Critical Review of High-Temperature Reversible Thermochemical Energy Storage Systems |
Applied Energy |
254 |
113733- |
| 250 |
2019 |
Bhaben Kalita and S. K. Dwivedy |
Nonlinear dynamics of a parametrically excited pneumatic artificial muscle (PAM) actuator with simultaneous resonance condition |
Mechanism and Machine Theory |
135 |
281-297 |
| 251 |
2019 |
Varun Sharma, Pulak M. Pandey, Uday S. Dixit, Anish Roy and Vadim V. Silberschmidt |
FE simulations of conventional and ultrasonically assisted turning processes with plane and textured cutting inserts |
Journal of Micromanufacturing |
2516598419878022 |
- |
| 252 |
2019 |
D. Gayen, R. Tiwari and D. Chakraborty |
Static and Dynamic Analyses of Cracked on Functionally Graded Structural Components: A Review |
Composites Part B |
173 |
106982- |
| 253 |
2019 |
Animesh Nandy, D. Chakraborty and Mahesh S Shah |
Optimal Sensors/Actuators Placement In Smart Structure using Island Model Parallel Genetic Algorithm |
International Journal of Computational Methods |
16 |
1840018- |
| 254 |
2019 |
C. Shravan and R. Tiwari |
Experimental Identification of Cracked Rotor System Parameters from the Forward and Backward Whirl Responses |
Archive in Mechanical Engineering |
66 |
329-353 |
| 255 |
2019 |
D. Gayen, R. Tiwari and D. Chakraborty |
Finite element based stability analysis of a rotor-bearing system having a functionally graded shaft with transverse breathing cracks |
International Journal of Mechanical Sciences |
157-158 |
403-414 |
| 256 |
2019 |
Dipendra K. Roy and R. Tiwari |
Identification of the Internal and External Damping in a Cracked Rotor System Undergoing Forward and Backward Whirls |
Archive in Mechanical Engineering |
66 |
229-255 |
| 257 |
2019 |
G. Ranjan and R. Tiwari |
Application of Active Magnetic Bearings for In-Situ Flexible Rotor Residual Balancing Using a Novel Generalized Influence Coefficient Method |
Inverse Problems in Science & Engineering |
27 |
943-968 |
| 258 |
2019 |
G.C. Verma, P.M. Pandey and U.S. Dixit |
An experimental study on surface roughness and frictional property of ultrasonic-vibration-assisted milled surface |
Proceedings of IMECH-E, Part C: Journal of Mechanical Engineering Science |
233 |
4187-4198 |
| 259 |
2019 |
H.S. Gaikwad, P.K. Mondal, D. N. Basu, N. Chimres, S. Wongwises |
Analysis of the effects of Joule heating and viscous dissipation on combined pressure-driven and electrokinetic flows in a two-parallel plate channel with unequal constant temperatures |
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering |
233 |
871-879 |
| 260 |
2019 |
J. Shruti Rapur and R. Tiwari |
Experimental fault diagnosis for known and unseen operating conditions of centrifugal pumps using MSVM and WPT based analyses |
Measurement |
147 |
1-15 |
| 261 |
2019 |
Kiran Naik B, Muthukumar P |
Performance comparison of air cooled and water cooled condenser based air conditioning plants in a humid subtropical region. |
J Air Conditioning and Refrigeration ISHRAE |
22 |
44-58 |
| 262 |
2019 |
Krishan Chand, Mukesh Sharma, Venugopal T. Vishnu, and Arnab Kr. De |
Statistics of coherent structures in twodimensional turbulent Rayleigh-Bénard convection |
Physics of Fluids |
31 |
1-15 |
| 263 |
2019 |
Lakshmi DVN, Muthukumar P, Layek A, Nayak PK. |
Performance Analyses of Mixed Mode Forced Convection Solar Dryer for Drying of Stevia Leaves. |
Solar Energy |
188 |
507-518 |
| 264 |
2019 |
M. S. Agrawal, H. S. Gaikwad, P. K. Mondal, G. Biswas |
Analysis and Experiments on the Spreading Dynamics of a Viscoelastic Drop |
Applied Mathematical Modelling |
75 |
201-209 |
| 265 |
2019 |
Manish Agrawal, Arup Nandy, CS Jog |
A hybrid finite element formulation for large-deformation contact mechanics |
Computer Methods in Applied Mechanics and Engineering |
356 |
407-434 |
| 266 |
2019 |
N. Bhardwaj, R.G. Naryanan, U.S. Dixit and M.S.J. Hashmi |
Recent developments in friction stir welding and resulting industrial practices |
Advances in Materials and Processing Technologies |
5 |
461-496 |
| 267 |
2019 |
Nandani Rai, Raagdeep Raj, S. Kanagaraj |
Radical Scavenging of Nanoceria in Minimizing the Oxidative Stress-Induced Loss of Residual Hearing: A Review |
Journal of the Indian Institute of Science |
99 |
529-545 |
| 268 |
2019 |
Nath, B., Bidkar, A. P., Kumar, V., Dalal, A., Jolly, M. K., Ghosh, S., and Biswas, G. |
Deciphering Hydrodynamic and Drug-resistant Behaviors of Metastatic EMT Breast Cancer Cells Moving in a Constricted Microcapillary |
Journal of Clinical Medicine |
8 |
1194-1-1194-15 |
| 269 |
2019 |
Nithin N. Raju, Muthukumar P, Vivek Selvan P, Malleswararao K. |
Design Methodology and Thermal Modelling of Industrial Scale Reactor for Solid State Hydrogen Storage |
Int J Hydrogen Energy |
44 |
20278-20292 |
| 270 |
2019 |
Pardeep Pankaj, Tiwari Avinish and Biswas Pankaj |
Influence of operating parameters on CO2 laser welded butt joints of AISI 304 stainless steel thin sheets |
Lasers in Manufacturing and Materials Processing |
, DOI:10.1007/s40516-019-00091-1, pp.1-23. |
1-23 |
| 271 |
2019 |
Pardeep Pankaj, Tiwari Avinish, Bhadra Rakesh and Biswas Pankaj |
Experimental Investigation on CO2 Laser Butt Welding of AISI 304 Stainless Steel and Mild Steel Thin Sheets |
Optics & Laser Technology |
119 (105633) |
1-14 |
| 272 |
2019 |
Parth Paritosh, Bhaben Kalita and Deepak Sharma |
A Game Theory based Land Layout Optimization of Cities Using Genetic Algorithm |
International Journal of Management Science and Engineering Management |
14 |
155-168 |
| 273 |
2019 |
R. Sarma and P. K . Mondal |
Marangoni instability in a heated viscoelastic liquid film: Longwave versus shortwave perturbations |
Physical Review E |
100 |
013103-1-013103-14 |
| 274 |
2019 |
R. Shufen, N. Mahanta and U.S. Dixit |
Development of a thermal autofrettage setup to generate compressive residual stresses on the surfaces of a cylinder |
ASME Journal of Pressure Vessel Technology |
141 |
51403-1-51403-12 |
| 275 |
2019 |
S. K. Hotta, N. Sahoo and K. Mohanty |
Comparative assessment of a spark ignition engine fueled with gasoline and raw biogas |
Renewable Energy |
134 |
1307-1319 |
| 276 |
2019 |
Sidhartha Das, Asis Giri, Sutanu Samanta, and S. Kanagaraj. |
Role of graphene nanofluids on heat transfer enhancement in thermosyphon |
Journal of Science: Advanced Materials and Devices |
4 |
163-169 |
| 277 |
2019 |
Soumya Ranjan Nanda, Vinayak Kulkarni, Niranjan Sahoo and Viren Menezes |
A comparison of accelerometer and piezofilm-based force balances for hypersonic shock tunnels |
Journal of Aerospace Engineering (IMeche Part G) |
233 |
5310-5320 |
| 278 |
2019 |
Soumya Ranjan Nanda, Vinayak Kulkarni, Niranjan Sahoo and Viren Menezes |
An innovative approach for prediction of aerodynamic coefficients in shock tunnel testing with soft computing |
Measurement |
134 |
773-780 |
| 279 |
2019 |
Prakash Kumar Sahu, Nikhil P Vasudevan, Bipul Das and Sukhomay Pal |
Assessment of Self-Reacting Bobbin Tool Friction Stir Welding for Joining AZ31 Magnesium Alloy at Inert Gas Environment |
Journal of Magnesium and Alloys |
7 |
661-671 |
| 280 |
2019 |
Prakash Kumar Sahu, Sukhomay Pal and Qingyu Shi |
Effect of solid solution phase constitution on dissimilar Al/Cu FSW using Zn as an alloying element at the joint interface |
SN Applied Sciences |
1 |
- |
| 281 |
2019 |
Bhaben Kalita and S. K. Dwivedy |
Dynamic analysis of pneumatic artificial muscle (PAM) actuator for rehabilitation with principal parametric resonance condition |
Nonlinear Dynamics |
97 |
2271-2289 |
| 282 |
2019 |
R. K. Ojha and S. K. Dwivedy |
Dynamic Analysis of a Three-Layered Sandwich Plate with Composite Layers and Leptadenia Pyrotechnica Rheological Elastomer-Based Viscoelastic Core |
Journal of Vibration Engineering & Technologies |
|
1-13 |
| 283 |
2019 |
Jibin T. Philip, Deepak Kumar, S.N. Joshi, Jose Mathew, Basil Kuriachen |
Monitoring of EDM parameters to develop tribo-adaptive Ti6Al4V surfaces through accretion of alloyed matrix |
Industrial Lubrication and Tribology |
72 |
- |
| 284 |
2019 |
Sandeep Das, Randhir Kumar Raman, N. Devarani, Shrikrishna N.Joshi |
Surface Alloying of Titanium Di-boride (TiB2) and Silicon Carbide (SiC) on Aluminium Al 5052 using Electric Discharge Processing |
Procedia Structural Integrity |
14 |
119-126 |
| 285 |
2019 |
P. Gangsar and R. Tiwari |
Diagnostics of Mechanical and Electrical Faults in Induction Motors using Wavelet based Features of Vibration and Current through Support Vector Machine Algorithms |
Journal of the Brazilian Society of Mechanical Sciences and Engineering |
41 |
1-25 |
| 286 |
2019 |
Anshul Garg and Santosha Kumar Dwivedy |
Nonlinear dynamics of parametrically excited piezoelectric energy harvester with 1: 3 internal resonance |
International Journal of Non-Linear Mechanics |
111 |
80-94 |
| 287 |
2019 |
Tiwari Avinish, Singh Piyush, Pardeep Pankaj, Biswas Pankaj, Kore S. D.& Gourav Rao A |
FSW of low carbon steel using Tungsten Carbide (WC-10wt.%Co) based tool material |
Journal of Mechanical Science and Technology |
33 |
1-8 |
| 288 |
2019 |
M K Dubey and Satyajit Panda |
Shear-based vibration control of annular sandwich plates using different piezoelectric fiber composites: A comparative study |
Journal of Sandwich Structures & Materials |
|
- |
| 289 |
2019 |
R. K. Ojha and S. K Dwivedy |
Analysis of Sandwich Plates with Isotropic Skins and Viscoelastic Core |
International Journal of Structural Stability and Dynamics, Dynamics |
19 |
1950033- |
| 290 |
2019 |
PVSS Sridhar, P. Mahanta and Biswas Pankaj |
Influence of Welding Current on Bead profile and Mechanical properties of Double sided submerged arc welding of AISI 304 Austenitic stainless steel |
Materials Today: Proceedings (Elsevier). |
doi.org/10.1016/j.matpr.2019.08.140. |
- |
| 291 |
2019 |
R S Reddy, S Panda and G Natarajan |
Nonlinear dynamics of functionally graded pipes conveying hot fluid |
Nonlinear Dynamics |
99 |
1989-2010 |
| 292 |
2019 |
M K Dubey and Satyajit Panda |
Shear actuation mechanism and shear-based actuation capability of an obliquely reinforced PFC in active control of annular plates |
Journal of Intelligent Material Systems and Structures |
30 |
2447-2463 |
| 293 |
2019 |
Bipul Das, Sukhomay Pal, Swarup Bag |
Probing defects in friction stir welding process using temperature profile |
Sadhana |
44 |
79- |
| 294 |
2019 |
Vigneshwaran K, Gurpreet Singh Sodhi, Muthukumar P, Senthilmurugan S. |
Concrete based high temperature thermal energy storage system: Experimental and Numerical Studies. |
Energy Conversion and Management |
198 |
111905- |
| 295 |
2019 |
Utpal Kiran, Deepak Sharma and Sachin Singh Gautam |
GPU-Warp based Finite Element Matrices Generation and Assembly using Coloring Method. |
6 |
4 |
718- |
| 296 |
2019 |
N Alom and U K Saha |
Drag and lift characteristics of a novel elliptical-bladed Savonius rotor with vent augementers |
ASME Journal of Solar Energy Engineering |
141 |
051007-1-051007-12 |
| 297 |
2019 |
V. Agrawal and Sachin S. Gautam |
Higher-order Hermite enriched contact finite elements for adhesive contact problems |
International Journal of Materials and Structural Integrity |
13 |
16-31 |
| 298 |
2019 |
Vigneshwaran K, Gurpreet Singh Sodhi, Muthukumar, P, Anurag Guha, Senthilmurugan S. |
Experimental and Numerical Investigations on High Temperature Cast Steel Based Sensible Heat Storage System |
Applied Energy |
251 |
113322- |
| 299 |
2019 |
Vishnu VT, Arnab Kr. De, P.K. Mishra |
Dynamics and statistics of reorientations of large-scale circulation in turbulent rotating Rayleigh-Bénard convection |
Physics of Fluids |
31 |
1-18 |
| 300 |
2019 |
Sarita, B., Senthilvelan,S |
Effects of lubricant on the surface durability of an injection molded polyamide 66 spur gear paired with a steel gear |
Tribology International |
137 |
193-211 |
| 301 |
2019 |
G.C. Verma, P.M. Pandey and U.S. Dixit |
An experimental study on surface roughness and frictional property of ultrasonic-vibration-assisted milled surface |
Proceedings of IMECH-E, Part C: Journal of Mechanical Engineering Science |
DOI: 10.1177/0954406219834587 |
- |
| 302 |
2019 |
S. gorthi, H. S. Gaikwad, P. K. Mondal, G. Biswas |
Surface Tension Driven Filling in a Soft Microchannel: Role of Streaming Potential |
Industrial & Engineering Chemistry Research |
Article in Press |
DOI: 10.1021/acs.iecr.9b00767- |
| 303 |
2019 |
M. K. Dubey and S. Panda |
Shear-based vibration control of annular sandwich plates using different piezoelectric fiber composites: A comparative study |
Journal of Sandwich Structures & Materials |
Accepted(doi.org/10.1177/1099636219838446) |
- |
| 304 |
2019 |
Avinish Tiwari, Pardeep Pankaj, Pankaj Biswas, Sachin D. Kore, and A Gourav Rao |
Tool performance evaluation of friction stir welded Shipbuilding grade DH36 steel butt joints |
International Journal of Advanced Manufacturing Technology |
|
- |
| 305 |
2019 |
Nath, B., Biswas, G., and Dalal, A. |
Influence of electric field on deformation of a drop in shear flow |
Physics of Fluids |
31 |
042102-1-042102-13 |
| 306 |
2019 |
Deka, H., Biswas, G., Chakraborty, S., and Dalal, A. |
Coalescence Dynamics of Unequal Sized Drop |
Physics of Fluids |
31 |
012105-1-012105-17 |
| 307 |
2019 |
P. Kaushik, P. K. Mondal, P. K. Kundu, S. Wongwises |
Rotating electroosmotic flow through a polyelectrolyte-grafted microchannel: An analytical solution |
Physics of Fluids |
31 |
22009- |
| 308 |
2019 |
H. Gaikwad, P. Baghel, R. Sarma, P. K. Mondal |
Transport of neutral solutes in a viscoelastic solvent through a porous microchannel |
Physics of Fluids |
31 |
22006- |
| 309 |
2019 |
A. Misra, P.M. Pandey, U.S. Dixtt, A. Roy and V.V. Silberschmidt |
Multi-objective optimization of ultrasonic-assisted magnetic abrasive finishing process |
International Journal of Advanced Manufacturing Technology, |
https://doi.org/10.1007/s00170-018-3060-0. |
- |
| 310 |
2019 |
Deka, H., Biswas, G., Sahu K.C., Kulkarni, Y., and Dalal, A. |
Coalescence Dynamics of a Compound Drop on a Deep Liquid Pool |
Journal of Fluid Mechanics |
866 |
R2-1-R2-11 |
| 311 |
2019 |
K. K. Gajrani, P. S. Suvin, S. V. Kailas and M. R. Sankar |
Thermal, rheological, wettability and hard machining performance of MoS2 and CaF2 based minimum quantity hybrid nano-green cutting fluids |
Journal of Materials Processing Technology |
266 |
125-139 |
| 312 |
2019 |
Poonam Kumari, Shranish Kar |
Static behavior of arbitrarily supported composite laminated cylindrical shell panels: An analytical 3D elasticity approach |
Composite Structures |
207 |
949-965 |
| 313 |
2019 |
K. K. Gajrani, P. S. Suvin, S. V. Kailas and M. R. Sankar |
Hard machining performance of indigenously developed green cutting fluid using flood cooling and minimum quantity cutting fluid |
Journal of Cleaner Production |
206 |
108-123 |
| 314 |
2019 |
Deka, H., Tsai, P-H, Biswas, G., Dalal, A., Ray, B., and Wang, A-B. |
Dynamics of Formation and Oscillation of Non-spherical Drops |
Chemical Engineering Science |
201 |
413-423 |
| 315 |
2019 |
N. Alom and U. K. Saha |
Influence of blade profiles on Savonius rotor performance: Numerical simulation and experimental validation |
Energy Conversion and Management |
186 |
267-277 |
| 316 |
2019 |
N. Alom and U. K. Saha |
Evolution and progress in the development of Savonius wind turbine rotor blade profiles and shapes |
ASME Journal of Solar Energy Engineering |
141 |
030801-15- |
| 317 |
2019 |
A. Sarkar and U. K. Saha |
A critique on the research activities and potential benefits of dual fuel diesel engine run on biogas and biofuel-blended biodiesel |
ASME Journal of Engineering for Gas Turbines and Power |
141 |
6-090801-26 |
| 318 |
2019 |
V. Kumar, U.S. Dixit and J. Zhang |
Determination of thermal conductivity, specific heat capacity and absorptivity during Laser-based materials processing |
Measurement |
139 |
213-225 |
| 319 |
2019 |
Bhardwaj, S., Dalal, A., and Mukherjee, P. P. |
Mesoscale Understanding of Capillarity Driven Two-phase Flow in a Packed Bed Architecture |
International Journal of Heat and Mass Transfer |
136 |
116-127 |
| 320 |
2019 |
S. Shyam, B. Mehta, P. K. Mondal, S. Wongwises |
Investigation into the thermo-hydrodynamics of ferrofluid flow under the influence of constant and alternating magnetic field by InfraRed Thermography |
International Journal of Heat and Mass Transfer |
135 |
1233-1247 |
| 321 |
2019 |
V. Kumar, U.S. Dixit and J. Zhang |
Determination of thermal conductivity, absorptivity and heat transfer coefficient during Laser-based manufacturing |
Measurement |
131 |
319-328 |
| 322 |
2019 |
V. Kumar, U.S. Dixit and J. Zhang |
Determination of thermal conductivity, absorpitivity and heat transfer coefficient during laser-based manufacturing |
Measurement |
131 |
319-328 |
| 323 |
2019 |
K. Saikia, M. Pandey, D.N. Basu |
Numerical investigation of the effect of inlet subcooling on flow instabilities in a parallel channel natural circulation boiling system |
Nuclear Engineering and Design |
114 |
13-21 |
| 324 |
2019 |
Nada Barakat and Deepak Sharma |
Modeling and Bi-Objective Optimization of Soil Cutting and Pushing Process for Bulldozer and its Blade |
Journal of The Institution of Engineers (India): Series C |
100 |
129-143 |
| 325 |
2019 |
Deepak Sharma and Nada Barakat |
Evolutionary Bi-Objective Optimization for Bulldozer and its Blade in Soil Cutting |
Journal of The Institution of Engineers (India): Series C |
100 |
295-310 |
| 326 |
2019 |
S. Sajith, K.S.R.K. Murthy and P.S. Robi |
Prediction of accurate mixed mode fatigue crack growth curves using the Paris’ law. |
Journal of The Institution of Engineers (India): Series C. |
100 |
165-174 |
| 327 |
2019 |
S. Dutta, P. K. Mondal, P. Goswami |
Slipping hydrodynamics of Powell-Eyring fluid in a cylindrical microchannel under electrical double layer phenomenon |
Physica Scripta |
94 |
25002- |
| 328 |
2019 |
Parmananda, M., Dalal, A., and Natarajan, G. |
Numerical appraisal of three low Mach number algorithms for radiative-convective flows in enclosures |
Computers and Mathematics with Applications |
77 |
2162-2181 |
| 329 |
2019 |
Randive, P., Dalal, A., and Mukherjee, P. |
Probing the Influence of Confinement and Wettability on Droplet Displacement Behavior: A Mesoscale Analysis |
European Journal of Mechanics, B/Fluids |
75 |
327-338 |
| 330 |
2019 |
U Talukdar, SM Hazarika, JQ Gan |
Motor imagery and mental fatigue: inter-relationship and EEG based estimation |
Journal of computational neuroscience |
46 |
55-76 |
| 331 |
2019 |
Manik, J., Dalal, A., and Natarajan, G. |
A Parametric Study on the Droplet Detachment Process from the Ceiling Under the Effect of Gravity |
Engineering Computations |
36 |
445-465 |
| 332 |
2019 |
V. Agrawal and Sachin S. Gautam |
IGA: A simplified introduction and implementation details for finite element users |
Journal of The Institution of Engineers (India): Series C. |
100 |
561-585 |
| 333 |
2018 |
Xiaojing Suo, Hengcheng Liao, Yiyun Hu, Uday S. Dixit, Pavel Petrov |
Formation of Al15Mn3Si2 phase during solidification of a novel Al-12% Si-4% Cu-1.2% Mn heat-resistant alloy and its thermal stability |
Journal of Materials Engineering and Performance |
Online on Feb. 21, 2018 |
- |
| 334 |
2018 |
U Talukdar, SM Hazarika, JQ Gan |
Motor imagery and mental fatigue: inter-relationship and EEG based estimation |
Journal of computational neuroscience |
Online First |
- |
| 335 |
2018 |
R. Chakrabarti, P. Biswas, S. C. Saha |
A Review on Welding Residual Stress Measurement by Hole Drilling Technique and its Importance |
Journal of Welding and Joining |
ISSN 2466-2232Online ISSN 2466-2100, pp 38-45. |
- |
| 336 |
2018 |
H. K. Narang, M. M. Mahapatra, P. K. Jha, PVSS Sridhar and P. Biswas (2018) , |
Experimental and Numerical Study on Effect of Weld Reinforcement on Angular Distortion of SAW Square butt Welded Plates |
Journal of Welding and Joining, |
ISSN 2466-2232, Online ISSN 2466-2100, https://doi.org/10.5781/JWJ.2018.36.2.8. |
- |
| 337 |
2018 |
A. Singh, P. Kumari |
Two-Dimensional elasticity solution for arbitrarily supported axially functionally graded |
Journal of Solid Mechanics |
|
- |
| 338 |
2018 |
Agyapal Singh, Poonam Kumari |
Analytical Solution of Functionally Graded Beam Having Longitudinal Stiffness Variation |
International Journal for Computational Methods in Engineering Science & Mechanics |
Inpress |
- |
| 339 |
2018 |
Manik, J., Dalal.A., and Natarajan, G. |
A Parametric Study on the Droplet Detachment Process from the Ceiling Under the Effect of Gravity |
Engineering Computations |
In Press |
- |
| 340 |
2018 |
Piyush Singh, Pankaj Biswas and Sachin D Kore , |
Influence of Welding Traverse Speed in Self-Reacting Friction Stir Welding of Aluminium alloy AA6061-T6 |
Journal of Ship Production and Design |
http://dx.doi.org/10.5957/JSPD.160047 |
- |
| 341 |
2018 |
Rakesh Bhadra, Pardeep Pankaj, Pankaj Biswas and U. S. Dixit |
Thermo-mechanical analysis of CO2 Laser butt welding on AISI 304 steel thin plates |
Internation Journal of Steel Structures |
DOI 10.1007/s13296-018-0085-z,pp 1-14 (accepted). February 2019, Volume 19, Issue 1, pp 14–27 |
- |
| 342 |
2018 |
K.K. Gajrani, R. P. K. Reddy and M.R. Sankar |
Tribo-mechanical, surface morphological comparison of un-textured, mechanical micro-textured (MµT) and coated-MµT cutting tools during machining |
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology |
Available online |
- |
| 343 |
2018 |
Rasmi Ranjan Behera, M. Ravi Sankar, Prahlad Kumar Baruah, Ashwini Kumar Sharma, Alika Khare |
Experimental investigation of nanosecond-pulsed Nd:YAG laser beam micromachining on 304 stainless steel |
Journal of Micromanufacturing |
Available online |
- |
| 344 |
2018 |
M. Ravi Sankar, V.K. Jain, J. Ramkumar, Shivesh K. Sareen, Sachin Singh |
Medium rheological characterization and performance study during rotational abrasive flow finishing (R-AFF) of Al alloy and Al alloy/SiC MMCs |
International Journal of Advanced Manufacturing Technology |
Available online |
- |
| 345 |
2018 |
Rasmi Ranjan Behera, Abshar Hasan, M. Ravi Sankar, L.M. Pandey |
Laser cladding with HA and functionally graded TiO2-HA precursors on Ti-6Al-4V alloy for enhancing bioactivity and cyto-compatibality |
Surface and Coatings Technology |
Available online |
- |
| 346 |
2018 |
Anwesa Barman, Manas Das |
Magnetic field assisted finishing process for super-finished Ti alloy implant and its 3D surface characterization |
The Proceedings of the Institution of Mechanical Engineers |
Available online |
- |
| 347 |
2018 |
Anupam Alok, Manas Das |
Multi-objective optimization of cutting parameters during sustainable dry hard turning of AISI 52100 steel with newly develop HSN2coated carbide insert |
Measurement |
Available online |
- |
| 348 |
2018 |
G. Ranjan and R. Tiwari |
Application of Active Magnetic Bearings for In-Situ Flexible Rotor Residual Balancing Using a Novel Generalized Influence Coefficient Method |
Inverse Problems in Science & Engineering |
Available online |
- |
| 349 |
2018 |
Vikas Prasad and R. Tiwari |
Identification of Speed-Dependent Active Magnetic Bearing Parameters and Rotor Balancing in High-Speed Rotor Systems |
ASME, Journal of Dynamic Systems, Measurement and Control |
Available online |
- |
| 350 |
2018 |
R. K. Ojha and S. K Dwivedy |
Dynamic Analysis of Sandwich Plates with Isotropic Skins and Viscoelastic Core |
International Journal of Structural Stability and Dynamics |
Available Online |
- |
| 351 |
2018 |
W.G. Jiru, M.R. Sankar and U.S. Dixit |
Laser surface alloying of aluminum for improving acid corrosion resistance |
Journal of Institution of Engineers, Series (C) |
Available online |
- |
| 352 |
2018 |
Randive. P., Dalal. A , and Mukherjee.P. |
Probing the Influence of Confinement and Wettability on Droplet Displacement Behavior: A Mesoscale Analysis |
European Journal of Mechanics, B/Fluids |
available online |
- |
| 353 |
2018 |
Deka.M., Brahmachary.S., Thirumalaisamy.R., Dalal. A., and Natarajan.G. |
A new Green-Gauss Reconstruction on Unstructured Meshes. Part I: Gradient Reconstruction |
Journal of Computational Physics |
available online |
- |
| 354 |
2018 |
Sachin Singh, Deepu Kumar, M. Ravi Sankar, V.K. Jain |
Viscoelastic medium modeling and surface roughness simulation of microholes finished by abrasive flow finishing process |
International Journal of Advanced Manufacturing Technology |
Available online |
- |
| 355 |
2018 |
P. Dinesh, M.R. Behera, P.G. Ranjith, N. Muthu |
An element-free Galerkin method using vertically averaged multiphase flow model for carbon sequestration |
Computers and Geotechnics |
Available Online |
- |
| 356 |
2018 |
N. Alom and U. K. Saha |
Examining the aerodynamic drag and lift characteristics of a newly developed elliptical-bladed Savonius rotor |
ASME Journal of Energy Resources Technology |
Available Online |
- |
| 357 |
2018 |
A. Sarkar and U. K. Saha |
A critique on the research activities and potential benefits of dual fuel diesel engine run on biogas and biofuel-blended biodiesel |
ASME Journal of Engineering for Gas Turbines and Power |
Available Online |
- |
| 358 |
2018 |
S. Sarma, N. Sahoo and A. Unal |
Prediction of impulse heat load on thin film gauges through soft computing technique |
Journal of the Institution of Engineers (India): Series C |
Article in Press |
- |
| 359 |
2018 |
B Kiran Naik, Mrinal Bhowmik, P Muthukumar |
Experimental investigation and numerical modelling on the performance assessments of evacuated U–Tube solar collector systems |
Renewable Energy |
Article in Press |
- |
| 360 |
2018 |
B Kiran Naik, P Muthukumar |
Energy, Entransy and Exergy Analyses of a Liquid Desiccant Regenerator |
International Journal of Refrigeration |
Article in Press |
- |
| 361 |
2018 |
B Kiran Naik, P Muthukumar, C Bhattacharyya |
Thermal modelling and parametric investigations on coupled heat and mass transfer processes occurred in a packed tower |
Heat and Mass Transfer |
Article in Press |
- |
| 362 |
2018 |
S. Sajith, K. S. R. Krishna Murthy and P. S. Robi |
A simple technique for estimation of mixed mode (I/II) stress intensity factors |
Journal of Mechanics of Materials and Structures |
Acepted for publication |
- |
| 363 |
2018 |
M.K. Hussian and K.S.R.K. Murthy |
A point substitution displacement technique for estimation of elastic notch stress intensities of sharp V-notched bodies |
Journal of Mechanics of Materials and Structures |
Acepted for publication |
- |
| 364 |
2018 |
Parth Paritosh, Bhaben Kalita and Deepak Sharma |
A Game Theory based Land Layout Optimization of Cities Using Genetic Algorithm |
International Journal of Management Science and Engineering Management |
Accepted, Available onlint |
- |
| 365 |
2018 |
Nada Barakat and Deepak Sharma |
Evolutionary Multi-Objective Optimization for Bulldozer and its Blade in Soil Cutting |
International Journal of Management Science and Engineering Management |
Accepted, Available onlint |
- |
| 366 |
2018 |
Nada Barakat and Deepak Sharma |
Modeling and Bi-Objective Optimization of Soil Cutting and Pushing Process for Bulldozer and its Blade |
Journal of The Institution of Engineers (India): Series C |
Accepted, Available onlint |
- |
| 367 |
2018 |
Deepak Sharma and Nada Barakat |
Evolutionary Bi-Objective Optimization for Bulldozer and its Blade in Soil Cutting |
Journal of The Institution of Engineers (India): Series C |
Accepted, Available onlint |
- |
| 368 |
2018 |
Muthukumar P, Bukke Kiran Naik, Amarendra Goswami |
Performance Evaluation of a Mechanical Draft Cross Flow Cooling Towers Employed in a Subtropical Region |
Journal of The Institution of Engineers (India) |
Accepted on 28th Dec 2017 |
- |
| 369 |
2018 |
Hakeem Niyas, Muthukumar P |
A Novel Encapsulation Technique for Performance Improvements in Latent Heat Storage System |
Solar Energy |
Accepted on 15 Jan 2018 |
- |
| 370 |
2018 |
K. K. Gajrani, S. Suresh, M. Ravi Sankar, |
Environmental friendly hard machining performance of uncoated and MoS2 coated mechanical micro-textured tungsten carbide cutting tools |
Tribology International |
Accepted for Publication |
- |
| 371 |
2018 |
W. Jiru, M. Ravi Sankar, U. S. Dixit |
Laser Surface Melting of Al-12Si-4Cu-1.2Mn Alloy |
International Journal of Mechatronics and Manufacturing Systems |
Accepted for Publication |
- |
| 372 |
2018 |
S. Pati, P.K. Mondal |
Limiting thermal characteristics for flow of non-Newtonian fluids between asymmetrically heated parallel plates: An analytical study |
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering |
Accepted for Publication |
- |
| 373 |
2018 |
H.S. Gaikwad, P.K. Mondal, D. N. Basu, N. Chimres, S. Wongwises |
Analysis of the effects of Joule heating and viscous dissipation on combined pressure-driven and electrokinetic flows in a two-parallel plate channel with unequal constant temperatures |
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering |
Accepted for Publication |
- |
| 374 |
2018 |
Vishal Agrawal, Sachin S. Gautam |
Higher-order Hermite enriched contact finite elements for adhesive contact problems, |
International Journal of Materials and Structural Integrity, |
Accepted for Publication |
- |
| 375 |
2018 |
Vishal Agrawal, Sachin S. Gautam |
IGA: A simplified introduction and implementation details for finite element users |
Journal of The Institution of Engineers (India): Series C |
Accepted for Publication |
- |
| 376 |
2018 |
Manish Kumar Dubey and Satyajit Panda |
A balanced laminate of piezoelectric fiber composite for improved shear piezoelectric actuation of beams |
Mechanics of Advanced Materials and Structures. |
Accepted for publication |
- |
| 377 |
2018 |
S. Behera, P. Kumari |
Free Vibration of Levy-type Rectangular Laminated Plates using Efficient Zig-Zag Theory |
Advances in Computational Design |
Accepted for Publication |
- |
| 378 |
2018 |
Poonam Kumari, Shranish Kar |
Static behavior of arbitrarily supported composite laminated cylindrical shell panels: An analytical 3D elasticity approach |
Composite Structures |
Accepted for Publication |
- |
| 379 |
2018 |
Utpal Kiran, Deepak Sharma, Sachin Singh Gautam |
GPU warp based FE matrices generation and assembly using coloring method |
Journal of Parallel and Distributed Computing |
Accepted |
- |
| 380 |
2018 |
Vishal Agrawal, Sachin Singh Gautam |
NURBS-enriched contact isogeometric element for adhesive contact problems |
Journal of Aerospace Systems Engineering |
Accepted |
- |
| 381 |
2018 |
Purnendu Kumar Mandal, P.S. Robi, |
Influence of micro-alloying with silver on microstructure and mechanical Properties of Al-Cu alloy |
Materials Science and Engineering A. |
A722 |
- |
| 382 |
2018 |
Arun Kadian & Biswas Pankaj |
The study of material flow behaviour in dissimilar material FSW of AA6061 and Cu-B370 alloys plates |
Journal of Manufacturing Processes |
34, Part A |
- |
| 383 |
2018 |
D. Shankar, M. Pandey, D.N. Basu |
configurations |
Annals of Nuclear Energy |
112 |
120-131 |
| 384 |
2018 |
Prakash Kumar Sahu and Sukhomay Pal |
Effect of FSW Parameters on Microstructure and Mechanical Properties of AM20 welds |
Journal of Materials and Manufacturing Processes |
33 |
288-298 |
| 385 |
2018 |
D. K. Yaduwanshi, S. Bag and Sukhomay Pal |
On the effect of tool offset in hybrid FSW of copper and aluminium alloy |
Journal of Materials and Manufacturing Processes |
33 |
277-278 |
| 386 |
2018 |
K.K. Gajrani, M.R. Sankar and U.S. Dixit |
Environmentally friendly machining with MoS2 filled mechnaically micro-textured cutting tools |
Journal of Mechnical Science and Technology |
32 |
3797-3805 |
| 387 |
2018 |
H. Deka, B. Ray, G. Biswas, and A. Dalal |
Dynamics of tongue shaped cavity generated during the impact of high-speed microdrops |
Physics of Fluids |
30 |
042103-1-042103-14 |
| 388 |
2018 |
Bhardwaj, S., Dalal, A., Mukherjee, P. P., and Biswas, G. |
Analysis of Droplet Dynamics in a Partially Obstructed Confinement in a Three-dimensional Channel |
Physics of Fluids |
30 |
102102-1-102102-14 |
| 389 |
2018 |
M. P. Borthakur, G. Biswas and D. Bandyopadhyay |
Dynamics of drop formation from submerged orifices under the influence of electric field |
Physics of Fluids |
30 |
1-11 |
| 390 |
2018 |
S. Pandian, S. L. N. Desikan and N. Sahoo |
Experimental investigation of starting characteristics and wave propagation from a shallow open cavity and its acoustic emission at supersonic speed |
Physics of Fluids |
30 |
16104-1-16104-11 |
| 391 |
2018 |
R. Sarma, N. Deka, K. Sarma, P. K. Mondal |
Electroosmotic flow of Phan-Thien–Tanner fluids at high zeta potentials: An exact analytical solution |
Physics of Fluids |
30 |
62001- |
| 392 |
2018 |
G. Kunti, P. K. Mondal, A. Bhattacharya, S. Chakraborty |
Electrothermally modulated contact line dynamics of a binary fluid in a patterned fluidic environment |
Physics of Fluids |
30 |
92005- |
| 393 |
2018 |
P. K. Mondal, S. Chaudhry |
Effects of gravity on the thermo-hydrodynamics of moving contact lines |
Physics of Fluids |
30 |
42109- |
| 394 |
2018 |
Kotoky, S., Dalal, A., and Natarajan, G. |
Effects of Specularity and Particle-particle Restitution Coefficients on the Hydrodynamic Behavior of Dispersed Gas-particle Flows Through Horizontal Channels |
Advanced Powder Technology |
29 |
874-889 |
| 395 |
2018 |
Kotoky, S., Dalal, A., and Natarajan, G. |
A Parametric Study of Dispersed Laminar Gas-Particle Flows Through Vertical and Horizontal Channels |
Advanced Powder Technology |
29 |
1072-1084 |
| 396 |
2018 |
Kotoky, S., Dalal, A., and Natarajan, G. |
Effects of Specularity and Particle-particle Restitution Coefficients on the Recirculation Characteristics of Dispersed Gas-particle Flows Through a Sudden Expansion |
Advanced Powder Technology |
29 |
2463-2475 |
| 397 |
2018 |
R. Vignesh Babu, Avanish Verma Kunwar, M. Charan, S. Kanagaraj |
Tweaking the diameter and concentration of carbon nanotubes and sintering duration in Copper based composites for heat transfer applications |
Advanced Powder Technology |
29 |
2356-2367 |
| 398 |
2018 |
S Kirtania and D Chakraborty |
Determination of Thermoelastic Properties of Carbon Nanotube/Epoxy Composites Using Finite Element Method |
|
27 |
3783-3788 |
| 399 |
2018 |
A. Bisht, V. Yadav, S. Suwas and U.S. Dixit |
Deformation behavior of AM30 magnesium alloy |
Journal of Materials Engineering and Performance |
27 |
4900-4910 |
| 400 |
2018 |
Arup Nandy, C. S. Jog |
Conservation Properties of the Trapezoidal Rule for Linear Transient Electromagnetics |
Journal of Advances in Mathematics and Computer Science |
26 |
1-26 |
| 401 |
2018 |
Borgohain, P., Dalal, A., Natarajan, G., and Gadgil, H. |
Numerical assessment of mixing performances in cross-T microchannel with curved ribs |
Microsystem Technologies |
24 |
1949-1963 |
| 402 |
2018 |
Devarshi Kashyap, P. Kishore Kumar, and S. Kanagaraj |
4D printed porous radiopaque shape memory polyurethane for endovascular embolization |
Additive Manufacturing |
24 |
687-695 |
| 403 |
2018 |
S. Panda, A Kumar |
A design of active constrained layer damping treatment for vibration control of circular cylindrical shell structure |
Journal of Vibration and Control |
24 |
5811-5841 |
| 404 |
2018 |
A Kumar, S Panda, V Narsaria, A Kumar |
Augmented constrained layer damping in plates through the optimal design of a 0-3 viscoelastic composite layer. |
Journal of Vibration and Control |
24 |
5514-5524 |
| 405 |
2018 |
Pranab K. Mondal, Somchai Wongwises |
Assesment of Thermodynamic Irreversibility in a Micro-Scale Viscous Dissipative Circular Couette Flow |
Entropy |
20 |
50- |
| 406 |
2018 |
Gunjo, D.G., Jena, S.R., Mahanta, P. and Robi, P.S., |
Melting enhancement of a latent heat storage with dispersed Cu, CuO and Al2O3 nanoparticles for solar thermal application. |
IEEE Sensors Journal, |
18 |
4847-4860 |
| 407 |
2018 |
Hotta, S.K., Sahoo, N. and Mohanty, K. |
Ignition Advancement Study for Optimized Characteristics of a Raw Biogas Operated Spark Ignition Engine |
Journal of green energy |
16 |
101-113 |
| 408 |
2018 |
Parmananda, M., Dalal, A., and Natarajan. G. |
Numerical appraisal of three low Mach number algorithms for radiative-convective flows in enclosures |
Computers and Mathematics with Applications |
In Press |
- |
| 409 |
2018 |
H. S. Gaikwad, A. Roy, P. K. Mondal, N. Chimres, S. Wongwises |
Irreversibility analysis in a slip aided electroosmotic flow through an asymmetrically heated microchannel: The effects of joule heating and the conjugate heat transfer |
Analytica Chimica Acta |
in press |
- |
| 410 |
2018 |
Agyapal Singh, Poonam Kumari, and Rupam Hazarika |
Analytical Solution for Bending Analysis of Axially Functionally Graded Angle-Ply Flat Panels |
Mathematical Problems in Engineering |
ID 2597484 |
- |
| 411 |
2018 |
J. S. Rapur and R. Tiwari |
On-line Time Domain Vibration and Current Signals Based Multi-Fault Diagnosis of Centrifugal Pumps using Support Vector Machines |
Journal of Nondestructive Evaluation |
Available online |
- |
| 412 |
2018 |
Niraj Kumar Mishra, P Muthukumar, Snehasish Panigrahy |
A Review on Clean Combustion Within Porous Media |
Air Pollution and Control |
|
209-224 |
| 413 |
2018 |
G Bolar, SN Joshi |
Numerical Modeling and Experimental Validation of Machining of Low-Rigidity Thin-Wall Parts |
Precision Product-Process Design and Optimization |
|
- |
| 414 |
2018 |
T. saikia, M. Baruah, S. Bag |
On the effect of heat input in plasma microwelding of maraging steel |
Proceedings of IMechE, Part B: Journal of Engineering Manufacture |
|
- |
| 415 |
2018 |
Hotta, S.K., Sahoo, N. and Mohanty, K. |
Comparative assessment of a spark ignition engine fueled with gasoline and raw biogas |
Renewable Energy |
|
- |
| 416 |
2018 |
A. Das, A. Kumar, G. P. Bharti, R. R. Behera, M. Ravi Sankar, A. Khare, D. Pamu, |
Effect of thickness on optical and microwave dielectric properties of Hydroxyapatite films deposited by RF magnetron sputtering |
Journal of Alloys and Compounds |
739 |
729-736 |
| 417 |
2018 |
Apurba Das, Anil Kumar Chikkala, Gyan Prakash Bharti, Rasmi Ranjan Behera, M. Ravi Sankar, Alika Khare, Pamu Dobbidi |
Effect of Thickness on Optical and Microwave Dielectric Properties of Hydroxiapetite Films Deposited by RF Magnetron Sputtering |
Journal of Alloys and Compounds |
739 |
729-736 |
| 418 |
2018 |
Guangjin Li, Hengcheng Liao, Xiaojing Suo, Yunyi Tang, Uday S. Dixit and Pavel Petrov |
Cr-induced morphology change of primary Mn-rich phase in Al-Si-Cu-Mn heat resistant aluminum alloys and its contribution to high temperature strength |
Materials Science & Engineering A |
709 |
90-96 |
| 419 |
2018 |
Arnab Chanda and S. K. Dwivedy |
Nonlinear dynamic analysis of flexible workpiece and tool in turning operation with delay and internal resonance |
Journal of Sound and Vibration |
434 |
358-378 |
| 420 |
2018 |
Arnab Kr. De |
A diffuse interface immersed boundary method for complex moving boundary problems |
Journal of Computational Physics |
366 |
226-251 |
| 421 |
2018 |
Kumar, A., Singh, A., Kumar, A., Singh, M.K., Mahanta, P. and Mukhopadhyay, S.C. |
Sensing Technologies for Monitoring Intelligent Buildings: A Review. |
Bioresource technology |
261 |
294-305 |
| 422 |
2018 |
R. Vignesh Babu, S. Kanagaraj |
Thermal, electrical and mechanical characterization of microwave sintered Copper/carbon nanotubes (CNT) composites against sintering duration, CNT diameter and its concentration. |
Journal of Materials Processing Tech |
258 |
296-309 |
| 423 |
2018 |
A. Sarkar and U. K. Saha |
Role of global fuel-air equivalence ratio and preheating on the behavior of biogas fueled diesel engine under dual fuel mode |
Fuel |
232 |
743-754 |
| 424 |
2018 |
Thirumalaisamy, R., Natarajan, G., and Dalal, A. |
A Charge-conservative Approach for Simulating Electrohydrodynamic Two-phase Flows Using Volume-of-fluid |
Journal of Computational Physics |
230 |
1939-1955 |
| 425 |
2018 |
M.P. Borthakur, D. Bandyopadhyay and G. Biswas |
Electric field mediated separation of water–ethanol mixtures in carbon nanotubes integrated in nanoporous graphene membranes |
Faraday Discuss |
209 |
259-271 |
| 426 |
2018 |
A Kumar, S Panda, A Kumar, V Narsaria |
Performance of a graphite wafer-reinforced viscoelastic composite layer for active-passive damping of plate vibration |
Compoiste Structures |
186 |
303-314 |
| 427 |
2018 |
Vigneshwaran K, Gurpreet Singh Sodhi, Muthukumar P, Arvind VK, Balamurugan G, Sriram S, Senthilmurugan S |
Experimental investigation of a Cast-Steel based Thermal Energy Storage System, Energy Procedia |
Energy Procedia |
176 |
627-637 |
| 428 |
2018 |
J.Sunku Prasad, P.Muthukumar, R.Anandalakshmi, HakeemNiyas |
Comparative study of phase change phenomenon in high temperature cascade latent heat energy storage system using conduction and conduction-convection models |
Solar Energy |
176 |
627-637 |
| 429 |
2018 |
Parag K. Talukdar, A. Sardar, Vinayak Kulkarni, Ujjwal K. Saha |
Parametric analysis of model Savonius hydrokinetic turbines through experimental and computational investigations |
Energy Conversion and Management |
158 |
36-49 |
| 430 |
2018 |
Ranjan Das, Sukanta Roy and Ujjwal K. Saha |
An inverse method for optimization of geometric parameters of a Savonius-style wind turbine |
Energy Conversion and Management |
155 |
116-127 |
| 431 |
2018 |
Nur Alom and Ujjwal K. Saha |
Performance evaluation of vent-augmented elliptical-bladed Savonius rotors by numerical simulation and wind tunnel experiments |
Energy |
152 |
277-290 |
| 432 |
2018 |
Achinta Sarkar and Ujjwal K. Saha |
Impact of intake charge preheating on a biogas run dual fuel diesel engine using ternary blends of diesel-biodiesel-ethanol |
ASCE Journal of Energy Engineering |
144 |
04018031-1-04018031-13 |
| 433 |
2018 |
R. Shufen and U.S. Dixit |
An analysis of thermal autofrettage process with heat treatment |
International Journal of Mechanical Sciences |
144 |
134-145 |
| 434 |
2018 |
N. Alom and U. K. Saha |
An insight into the drag and lift characteristics of modified Bach and Benesh profiles of Savonius wind rotor |
Energy Prodedia |
144 |
50-56 |
| 435 |
2018 |
K. K. Gajrani, M. Ravi Sankar, U. S. Dixit |
Tribological performance of MoS2-filled microtextured cutting tools during dry sliding test |
ASME Journal of Tribology |
140 |
021301-1-021301-11 |
| 436 |
2018 |
Rajkumar Sarma, Pranab K. Mondal |
Entropy Generation Minimization in a Pressure-Driven Microflow of Viscoelastic Fluid With Slippage at the Wall: Effect of Conjugate Heat Transfer |
ASME Journal of Heat Transfer |
140 |
052402-1-052402-11 |
| 437 |
2018 |
Achinta Sarkar and Ujjwal K. Saha |
Effect of intake charge preheating and equivalence ratio in a dual fuel diesel engine run on biogas and ethanol-blended diesel |
ASME Journal of Energy Resources Technology |
140 |
041802-01-041802-13 |
| 438 |
2018 |
Nur Alom and Ujjwal K. Saha |
Four decades of research into the augmentation techniques of Savonius wind turbine rotor |
ASME Journal of Energy Resources Technology |
140 |
050801-1-050801-14 |
| 439 |
2018 |
G.C. Verma, P. M. Pandey and U.S. Dixit |
Estimation of workpiece-temperature during ultrasonic-vibration assisted milling considering acoustic softening |
International Journal of Mechanical Sciences |
140 |
547-556 |
| 440 |
2018 |
Pandey, V., Biswas, G., Dalal, A., and Welch, S.W.J. |
Bubble Lifecycle During Heterogeneous Nucleate Boiling |
ASME Journal of Heat Transfer |
140 |
121503-1-121503-17 |
| 441 |
2018 |
P. Gangsar, R. Tiwari |
Multi-fault Diagnosis of Induction Motor at Intermediate Operating Conditions using Wavelet Packet Transform and Support Vector Machine |
ASME, Journal of Dynamic Systems, Measurement and Control |
140 |
- |
| 442 |
2018 |
R. Shufen and U.S. Dixit |
A review of theoretical and experimental research on various autofrettage processes |
ASME Journal of Pressure Vessel Technology |
140 |
- |
| 443 |
2018 |
G.C. Verma, P. M. Pandey and U.S. Dixit |
Modeling of static machining force in axial ultrasonic-vibration assisted milling considering acoustic softening |
International Journal of Mechanical Sciences |
136 |
1-16 |
| 444 |
2018 |
Borgohain, P., Arumughan, J., Dalal, A., and Natarajan, G. |
Design and Performance of a Three-dimensional Micromixer with Curved Ribs |
Chemical Engineering Research and Design |
136 |
761-775 |
| 445 |
2018 |
P. Gangsar and R. Tiwari |
A Support Vector Machine based Fault Diagnostics of Induction Motors for Practical Situation of Multi-Sensor Limited Data Case Measurement |
Measurement |
135 |
694-711 |
| 446 |
2018 |
Parmananda, M., Thirumalaisamy, R., Dalal, A., and Natarajan, G. |
Investigations of Turbulence-radiation Interaction in Non-Oberbeck-Boussinesq Buoyancy-driven Flows |
International Journal of Thermal Sciences |
134 |
298-316 |
| 447 |
2018 |
Anwesa Barman, Manas Das |
Simulation and experimental investigation of finishing forces in magnetic field assisted finishing process |
Journal of Materials and Manufacturing Processes |
133 |
1223-1232 |
| 448 |
2018 |
Lav Kumar Kaushik, P Muthukumar |
Life cycle Assessment (LCA) and Techno-economic Assessment (TEA) of medium scale (5–10 kW) LPG cooking stove with two-layer porous radiant burner |
Applied Thermal Engineering |
133 |
316-326 |
| 449 |
2018 |
A. Iqbal, M. Pandey |
A simple methodology to incorporateflashing and variation of thermophysical properties for flow boilingpressure drop in a microchannel |
International Journal of Thermal Sciences |
132 |
137-145 |
| 450 |
2018 |
B Kiran Naik, P Muthukumar, P Sunil Kumar |
A novel finite difference model coupled with recursive algorithm for analyzing heat and mass transfer processes in a cross flow dehumidifier/regenerator |
International Journal of Thermal Sciences |
131 |
1-13 |
| 451 |
2018 |
A. Panda, J. S. Rapur and R. Tiwari |
Prediction of Flow Blockages and Impending Cavitation in Centrifugal Pumps using Support Vector Machine (SVM) Algorithms Based on Vibration Measurements |
Measurement |
130 |
44-56 |
| 452 |
2018 |
Subham, Saikia, A., Dalal, A., and Pati, S. |
Thermo-hydraulic Transport Characteristics of Non-Newtonian Fluid Flows Through Corrugated Channels |
International Journal of Thermal Sciences |
129 |
201-208 |
| 453 |
2018 |
Chilaka Ravi Chandra Rao, Hakeem Niyas, Muthukumar P |
Performance Tests on Lab–scale Sensible Heat Storage Prototypes. |
Applied Thermal Engineering |
129 |
953-967 |
| 454 |
2018 |
Mishra NK, Muthukumar P |
Development and Testing of Energy Efficient and Environment Friendly Porous Radiant Burner Operating on Liquefied Petroleum Gas. |
Applied Thermal Engineering |
129 |
482-489 |
| 455 |
2018 |
Parag K. Talukdar, Vinayak Kulkarni, Ujjwal K. Saha |
Field-testing of model helical-bladed hydrokinetic turbines for small-scale power generation |
Renewable Energy |
127 |
158-167 |
| 456 |
2018 |
Borgohain, P., Choudhary, D., Dalal, A., and Natarajan, G. |
Numerical Investigation of Mixing Enhancement for Multi-species Flows in Wavy Channels |
Chemical Engineering & Processing: Process Intensification |
127 |
191-205 |
| 457 |
2018 |
P. K. Talukdar, V. Kulkarni and U. K. Saha |
Field testing of model helical-bladed hydrokinetic turbine for small-scale power generation |
Renewable Energy |
127 |
158-167 |
| 458 |
2018 |
Parmananda, M., Dalal, A., and Natarajan, G. |
Unified Framework for Buoyancy Induced Radiative-convective Flow and Heat Transfer on Hybrid Unstructured Meshes |
International Journal of Heat and Mass Transfer |
126 |
908-925 |
| 459 |
2018 |
R. Sarma, A. Nath, T. Konwar, P. K. Mondal, S. Wongwises |
Thermo-hydrodynamics of a viscoelastic fluid under asymmetrical heating |
International Journal of Heat and Mass Transfer |
125 |
515-524 |
| 460 |
2018 |
Bhadauriya, S., Kapadia, H., Dalal, A., and Sarkar, S. |
Effect of channel confinement on wake dynamics and forced convective heat transfer past a blunt headed cylinder |
International Journal of Thermal Sciences |
124 |
467-476 |
| 461 |
2018 |
Randive, P., Dalal, A., and Mukherjee, P. P. |
Mesoscopic Modeling of Capillarity-induced Two-phase Transport in a Microfluidic Porous Structure |
Transport in Porous Media |
122 |
673-691 |
| 462 |
2018 |
Sandeep Singh, R. Tiwari |
Model Based Identification of Crack and Bearing Dynamic Parameters In Flexible Rotor Systems Supported with an Auxillary Active Magnetic Bearing |
Mechanisn and Machine Theory |
122 |
292-307 |
| 463 |
2018 |
Parmananda, M., Dalal, A., and Natarajan, G. |
The Influence of Partitions on Predicting Heat Transfer due to the Combined Effects of Convection and Thermal Radiation in Cubical Enclosures |
International Journal of Heat and Mass Transfer |
121 |
1179-1200 |
| 464 |
2018 |
D. G. Gunjo, P. Mahanta and P. S. Robi |
Melting enhancement of a latent heat storage with dispersed Cu, CuO and Al2O3 nanoparticles for solar thermal applications |
Renewable Energy. 121C (2018)pp: 652-665. |
121 |
652-665 |
| 465 |
2018 |
G Bolar, A Das, SN Joshi |
Measurement and analysis of cutting force and product surface quality during end-milling of thin-wall components |
Measurement |
121 |
190-204 |
| 466 |
2018 |
Deb, S., Tammi, K., Kalita, K. and Mahanta, P., |
Impact of Electric Vehicle Charging Station Load on Distribution Network. |
Renewable Energy |
121 |
652-665 |
| 467 |
2018 |
Lakshmia DVN, Muthukumar P, Apurba Layek, Nayak PK Energy Storage.Renewable Energy 120 (2018) 23-34. |
Drying Kinetics and Quality Analysis of Black Turmeric (Curcuma Caesia) Drying in a Mixed Mode Forced Convection Solar Dryer Integrated with Thermal Energy storage |
Renewable Energy |
120 |
23-34 |
| 468 |
2018 |
D. Shankar, M. Pandey, D.N. Basu |
Parametric effects on coupled neutronic-thermohydraulic stability characteristics of supercritical water cooled reactor |
Annals of Nuclear Energy |
112 |
120-131 |
| 469 |
2018 |
Singh S. S., Baruah P. K., Khare A. and Joshi S. N. |
Incubation studies and the threshold for surface damage and cavity formation in the processing of polycarbonate by Nd:YAG laser |
Optics and Laser Technology |
108 |
592-601 |
| 470 |
2018 |
V. Kumar and U.S. Dixit |
A model for the estimation of hardness of laser bent strips |
Optics and Laser Technology |
107 |
491-499 |
| 471 |
2018 |
Manik, J., Dalal, A., and Natarajan, G. |
A Generic Algorithm for Three-dimensional Multi-phase Flows on Unstructured Meshes |
International Journal of Multiphase Flow |
106 |
228-242 |
| 472 |
2018 |
A. Iqbal, M. Pandey |
Effect of local thermophysical propertiesand flashing on ow boiling pressure drop in microchannels |
International Journal of Multiphase Flow |
106 |
311-324 |
| 473 |
2018 |
R. S. Srinivas, R. Tiwari and Ch. K. Babu |
Application of Active Magnetic Bearings in Flexible Rotordynamic Systems - A State-of-the-Art Review |
Mechanical Systems and Signal Processing |
106 |
537-572 |
| 474 |
2018 |
Chandan Kumar, Manas Das, C.P. Paul, K.S. Bindra |
Comparison of bead shape, microstructure and mechanical properties of fiber laser beam welding of 2 mm thick plates of Ti-6Al-4V alloy |
Optics and Laser Technology |
105 |
306-321 |
| 475 |
2018 |
J. Ravi, S. Nidhan, N. Muthu, S.K. Maiti |
Analytical and Experimental studies on detection of longitudinal, L and T shaped cracks in Isotropic and Bi-material beams based on changes in natural frequency |
Mechanical Systems and Signal Processing |
101 |
67-96 |
| 476 |
2018 |
B. N.Fetene, Vikash Kumar, Uday S.Dixit, Raghu Echempati |
Numerical and experimental study on multi-pass laser bending of AH36 steel strip |
Optics & Laser Technology |
99 |
291-300 |
| 477 |
2018 |
N. Sahoo, V. Kulkarni and R. K. Peetala |
Conjugate heat transfer study in hypersonic flows |
Journal of the Institution of Engineers (India): Series C |
99 |
151-158 |
| 478 |
2018 |
SS Singh, PK Baruah, A Khare, SN Joshi |
Effect of laser beam conditioning on fabrication of clean micro-channel on stainless steel 316L using second harmonic of Q-switched Nd: YAG laser |
Optics and Laser Technology |
99 |
107-117 |
| 479 |
2018 |
Bipul Das, Sukhomay Pal, Swarup Bag |
Monitoring of friction stir welding process using main spindle motor current |
Journal of The Institution of Engineers (India): Series C |
99 |
711-716 |
| 480 |
2018 |
B.N. Fetene, V. Kumar, U.S. Dixit and R. Echempati |
Numerical and experimental study on multi-pass laser bending of AH36 steel strips |
Optics and Laser Technology |
99 |
291-300 |
| 481 |
2018 |
M. P. Borthakur, G. Biswas, and D. Bandyopadhyay |
Dynamics of deformation and pinch-off of a migrating compound droplet in a tube |
Physical Review E |
97 |
043112-1-043112-9 |
| 482 |
2018 |
Arnab Lahiri, Pranab K. Mondal |
Evaluation of temperature history of a spherical nanosystem irradiated with various short-pulse laser sources |
Physical Review E |
97 |
43302- |
| 483 |
2018 |
Rajkumar Sarma, Pranab K. Mondal |
Marangoni instability in a thin film heated from below: Effect of nonmonotonic dependence of surface tension on temperature |
Physical Review E |
97 |
43105- |
| 484 |
2018 |
Nath, B., Biswas, G., Dalal, A., and Sahu, K. C. |
Cross-stream Migration of Drops Suspended in Poiseuille Flow in the Presence of an Electric Field |
Physical Review E |
97 |
63106-1-63106-13 |
| 485 |
2018 |
Pranjol Paul, K.S.R.K. Murthy and D. Chakraborty |
A strain gage technique for mode I notch stress intensity factor of sharp V-notched configurations |
Theoretical and Applied Fracture Mechanics |
94 |
57-70 |
| 486 |
2018 |
Manish Kumar Dubey and Satyajit Panda |
Electromechanical properties and actuation capability of an extension mode piezoelectric fiber composite actuator with cylindrically periodic microstructure |
Archive of Applied Mechanics |
88 |
2261-2281 |
| 487 |
2018 |
Rasmi Ranjan Behera, A. Das, D. Pamu, L.M. Pandey, M. Ravi Sankar |
Mechano-tribological properties and in vitro bioactivity of biphasic calcuim phosphate coating on Ti-6Al-4V |
Journal of the Mechanical Behavior of Biomedical Materials |
86 |
143-157 |
| 488 |
2018 |
S. Brahmachary, G. Natarajan, V. Kulkarni and N. Sahoo |
A sharp‐interface immersed boundary framework for simulations of high‐speed inviscid compressible flows |
International Journal of Numerical Methods in Fluids |
86 |
770-791 |
| 489 |
2018 |
U Talukdar, SM Hazarika, JQ Gan |
A Kernel Partial least square based feature selection method |
Pattern Recognition |
83 |
91-106 |
| 490 |
2018 |
Pandey, V., Biswas, G., and Dalal, A. |
Effect of Surface Wettability and Electric Field on Transition of Film Boiling to Nucleate Boiling |
Numerical Heat Transfer, Part A |
74 |
1105-1120 |
| 491 |
2018 |
M. P. Borthakur, G. Biswas and D. Bandyopadhyay |
Dynamics of an arched liquid jet under the influence of gravity |
European Journal of Mechanics / B Fluids |
74 |
1-9 |
| 492 |
2018 |
Arnab Kr. De, V. Eswaran, P. K. Mishra |
Dynamics of plumes in turbulent Rayleigh-Benard convection |
European Journal of Mechanics - B/Fluids |
72 |
164-178 |
| 493 |
2018 |
Bhardwaj, S., and Dalal, A. |
Mesoscopic Analysis of Three-dimensional Droplet Displacement on Wetted Grooved Wall of a Rectangular Channel |
European Journal of Mechanics / B Fluids |
67 |
35-53 |
| 494 |
2018 |
S. Brahmachary, G. Natarajan and N. Sahoo |
On maximum ballistic coefficient axisymmetric geometries in hypersonic flows |
Journal of Spacecraft and Rockets |
55 |
518-522 |
| 495 |
2018 |
Kumar, G., Kalita, K., Tammi, K. |
Analysis of Bridge Currents and UMP of an Induction Machine With Bridge Configured Winding Using Coupled Field and Circuit Modeling |
IEEE Transactions on Magnetics |
54 |
- |
| 496 |
2018 |
Anwesa Barman, Manas Das |
Nano-finishing of bio-titanium alloy to generate different surface morphologies by changing Magnetorheological polishing fluid compositions |
Precision Engineering |
51 |
145-152 |
| 497 |
2018 |
S Pushp, A Saikia, A Khan, SM Hazarika |
A cognitively enhanced collaborative control architecture for an intelligent wheelchair: Formalization, implementation and evaluation |
Cognitive Systems Research |
49 |
114-127 |
| 498 |
2018 |
Shobhanjana Kalita, Arindam Karmakar, Shyamanta M Hazarika |
Efficient extraction of spatial relations for extended objects vis-à-vis human activity recognition in video |
Applied Intelligence |
48 |
204-219 |
| 499 |
2018 |
Sangeeta Das, S.S. Gautam, C.R. Gautam, Abhishek Madheshiya and U.S. Dixit |
Parametric optimization of dry sliding wear and friction of germanium doped lead calcium titanate borosilicate glass ceramic |
Ceramics International |
44 |
6541-6550 |
| 500 |
2018 |
Arup Nandy, C. S. Jog |
A monolithic finite-element formulation for magnetohydrodynamics |
Sadhana: Indian Academy of Sciences |
43 |
151- |
| 501 |
2018 |
P Muthukumar, Alok Kumar, Nithin N Raju, K Malleswararao, Muhammad M Rahman |
A critical review on design aspects and developmental status of metal hydride based thermal machines |
International Journal of Hydrogen Energy |
43 |
17753-17779 |
| 502 |
2018 |
Ashish J. Chaudhari, Vinayak Kulkarni and Niranjan Sahoo |
State-of-the-art technology in variable compression ratio mechanism for spark ignition engine |
Sadhana |
43 |
- |
| 503 |
2018 |
R. Kant and S N Joshi |
Numerical investigations into influence of scanning path curvature on deformation behavior during curvilinear laser bending of magnesium sheets |
Journal of Thermal Stresses |
41 |
313-330 |
| 504 |
2018 |
J. S. Rapur, R. Tiwari |
Automation of Multi-Fault Diagnosing of Centrifugal Pumps using Multi-Class Support Vector Machine with Vibration and Motor-Current Signals in Frequency Domain |
Journal of the Brazilian Society of Mechanical Sciences and Engineering (BMSE) |
40 |
278-298 |
| 505 |
2018 |
Chandan Kumar, Manas Das, C.P. Paul, K.S. Bindra |
Characteristics of fiber laser weldments of two phases (α+β) titanium alloy |
Journal of Manufacturing Processes |
35 |
351-359 |
| 506 |
2018 |
Chandan Kumar, Manas Das, C.P. Paul, K.S. Bindra |
Characteristics of ?ber laser weldments of two phases (?+?) titanium alloy |
Journal of Manufacturing Processes |
35 |
351-359 |
| 507 |
2018 |
Zayoud, A., Mahanta, P. and Saha, U.K., |
A Novel Method of Pure Oxy-fuel Circulating Fluidized Bed Combustion with Zero Recirculation Flue Gas–Experimental Validation. |
Energies |
11 |
178- |
| 508 |
2018 |
A. Mukherjee, P. K. Mondal |
Analysis of Heat Transfer Through Optically Participating Medium in a Concentric Spherical Enclosure: The Role of Dual-Phase-Lag Conduction and Radiation |
Journal of Thermal Science and Engineering Applications |
10 |
41022- |
| 509 |
2018 |
P. K. Talukdar, V. Kulkarni and U. K. Saha |
Performance estimation of Savonius wind and Savonius hydrokinetic turbines under identical power input |
AIP Journal of Renewable and Sustainable Energy Reviews |
10 |
064704-1-064704-15 |
| 510 |
2018 |
R Bhattacharyya, SM Hazarika |
Object affordance driven inverse reinforcement learning through conceptual abstraction and advice |
Paladyn Journal of Behavioral Robotics |
9 |
277-294 |
| 511 |
2018 |
Nath, B., Raza, A., Sethi, V., Dalal, A., Ghosh, S., and Biswas, G. |
Understanding Flow Dynamics, Viability and Metastatic Potency of Cervical Cancer (HeLa) Cells Through Constricted Microchannels |
Scientific Reports |
8 |
17357-1-17357-10 |
| 512 |
2018 |
H. S. Gaikwad, P. K. Mondal, S.Wongwises |
Softness induced enhancement in net throughput of non linear bio fluids in nanofluidic channel under EDL phenomena |
Scientific Reports - Nature |
8 |
7893-1-7893-16 |
| 513 |
2018 |
Deb, S., Tammi, K., Kalita, K., & Mahanta, P. |
Review of recent trends in charging infrastructure planning for electric vehicles |
Wiley Interdisciplinary Reviews: Energy and Environment |
7 |
- |
| 514 |
2018 |
S. Singh, D. Kumar, M. Ravi Sankar, K. Rajurkar |
Nanofinishing of Microslots on Surgical Stainless Steel by Abrasive Flow Finishing Process: Experimentation and Modeling |
ASME Journal of Micro-Nano Manufacturing |
6 |
21005-1-21005-12 |
| 515 |
2018 |
S. Agarwal and N. Sahoo |
An experimental investigation towards calibration of a shock tube and stagnation heat flux determination |
International Journal of Aerodynamics |
6 |
18-40 |
| 516 |
2018 |
Dipankar Bora, Manoj Kumar, Sachin Singh Gautam |
Ductile fracture at high velocity impact of cylindrical tubes |
Materials Today: Proceedings |
5 |
18983-18991 |
| 517 |
2018 |
N Devarani, SN Joshi |
Surface Alloying of Ti-6Al-4V on P20 Mold Steel using Electric Discharge Processing (EDP) |
Materials Today: Proceedings |
5 |
8523-8531 |
| 518 |
2018 |
G Bolar, M Mekonen, A Das, SN Joshi |
Experimental Investigation on Surface Quality and Dimensional Accuracy during Curvilinear Thin-Wall Machining |
Materials Today: Proceedings |
5 |
6461-6469 |
| 519 |
2018 |
P.P. Dutta, K. Kalita and U.S. Dixit |
Electromagnetic-force-assisted bending and striaghtening of AH36 steel strip by laser irradaition |
Lasers in Manufacturing and Materials Processing |
5 |
201-221 |
| 520 |
2018 |
A. Zayoud, P. Mahanta and U. K. Saha |
A Novel method of pure oxy-fuel circulating fluidized bed combustion with zero recirculation flue gas – Experimental validation |
Materials Today: Proceedings |
5 |
50-56 |
| 521 |
2018 |
Hotta, S.K., Sahoo, N., Mohanty, K. and Mahanta, P. |
Effect of Compression Ratio on the Performance of a Constant Speed Spark Ignition Engine Operating on Raw Biogas |
Journal of Energy and Environmental Sustainability |
5 |
53-57 |
| 522 |
2018 |
A. Singh, N. A. Manikandan, M. Ravi Sankar, K. Pakshirajan, L. Roy, |
Experimental Investigation and Surface Morphology of Bio-Micromachining on copper |
Materials Today: Proceedings |
5 |
4225-4234 |
| 523 |
2018 |
B. V. Ramanaiah, B. Manikanta, M. Ravi Sankar, M. Malhotra, K. K. Gajrani |
Experimental study of Deflection and Surface Roughness in Thin Wall Machining of Aluminum Alloy |
Materials Today: Proceedings |
5 |
3745-3754 |
| 524 |
2018 |
P.P. Dutta, K. Kalita, U.S. Dixit and H. Liao |
Magnetic-force-assisted straightening of bent mild steel strip by laser irradiation |
Lasers in Manufacturing and Materials Processing |
4 |
206-226 |
| 525 |
2018 |
Bhardwaj, S., and Dalal, A. |
Sweeping of the Entrapped Fluid out of the Groove in a Three-dimensional Channel Using Lattice Boltzmann Method |
European Journal of Mechanics, B/Fluids |
2 |
328-339 |
| 526 |
2018 |
A. Gogoi, K. Anki Reddy, P. K. Mondal |
Multilayer Graphene Oxide Membrane in Forward Osmosis: Molecular Insights |
ACS Applied Nano Materials |
1 |
4450-4460 |
| 527 |
2018 |
U.S. Dixit, V. Yadav, R.G. Naryanan and N. Bhardwaj |
Friction in micromanufacturing: a review |
Journal of Micromanufacturing |
1 |
76-91 |
| 528 |
2017 |
B.N. Fetene, U.S. Dixit and H. Liao |
Laser bending friction stir processed and cement coated sheets |
Materials and Manufacturing Processes |
|
- |
| 529 |
2017 |
Kiran Kumar LG, Muthukumar P, Sudhkar S |
Thermal comfort analysis of hostels in National Institute of Technology Calicut, India |
Sadhana |
|
- |
| 530 |
2017 |
H. Chattopadhyay, S. K. Samanta, G. Biswas and B. B. Sharma |
Direct numerical simulation of evaporation in a biporous media |
Journal of Mechanical Science and Technology |
31 |
2635-2641 |
| 531 |
2017 |
Pandey, V., Biswas, G., and Dalal, A. |
Saturated Film Boiling at Various Gravity Levels Under the Influence of Electrohydrodynamic Forces |
Physics of Fluids |
29 |
032104-1-032104-13 |
| 532 |
2017 |
Deka, H., Ray, B., Biswas, G., Dalal, A., Tsai, P-H, and Wang, A-B. |
The Regime of Large Bubble Entrapment During a Single Drop Impact on a Liquid Pool |
Physics of Fluids |
29 |
092101-1-092101-13 |
| 533 |
2017 |
Bipul Das, Sukhomay Pal and Swarup Bag |
Torque based defect detection and weld quality modelling in friction stir welding process |
Journal of Manufacturing Processes |
27 |
8-17 |
| 534 |
2017 |
Arun K Kadian |
Effect of tool pin profile on the material flow characteristics of AA6061 |
Journal of Manufacturing Processes |
26 |
382-392 |
| 535 |
2017 |
Ashish Kumar Rajak, Sachin D Kore |
Experimental investigation of aluminium–copper wire crimping with electromagnetic process: Its advantages over conventional process |
Journal of Manufacturing Processes |
26 |
57-66 |
| 536 |
2017 |
P. Kaushik, P. K. Mondal, S. Chakraborty |
Rotational electrohydrodynamics of a non‑Newtonian fluid under electrical double‑layer phenomenon: the role of lateral confinement |
Microfluidics and Nanofluidics |
21 |
122-1-122-16 |
| 537 |
2017 |
R. Sarma, H. Gaikwad, P. K. Mondal |
Effect of Conjugate Heat Transfer on Entropy Generation in Slip Driven Microflow of Power-Law fluids |
Nanoscale and Microscale Thermophysical Engineering |
21 |
26-44 |
| 538 |
2017 |
Nizar Faisal Alkayem, Biswajit Parida and Sukhomay Pal |
Optimization of friction stir welding process parameters using soft computing techniques, Soft Computing |
Soft Computing |
21 |
7083-7098 |
| 539 |
2017 |
D. Sarkar, B. S. Reddy, S. Mandal, M. Ravi Sankar, B. Basu, |
Uniaxial Compaction-Based Manufacturing Strategy and 3D Microstructural Evaluation of Near-Net-Shaped ZrO2-Toughened Al2O3Acetabular Socket |
Advanced Engineering Materials |
18 |
1634-1644 |
| 540 |
2017 |
Bhardwaj, S., Randive, P. and Dalal, A. |
Lattice Boltzmann Simulations of Coalescence of Two Droplets on a Rectangular Channel Wall Considering Wetting Effects |
Progress in Computational Fluid Dynamics |
17 |
281-289 |
| 541 |
2017 |
Bhardwaj, S., Randive, P., and Dalal, A. |
Numerical Investigation of Two Dimensional Natural Convection and Entropy Generation inside a Porous Square Enclosure with Sinusoidally Heated Wall |
Progress in Computational Fluid Dynamics |
17 |
281-289 |
| 542 |
2017 |
M. Baruah, S. Bag and S Kumar |
Probing phase lag effect in ultra-short pulse laser heating of nano-film |
Manufacturing Letters |
13 |
6-10 |
| 543 |
2017 |
B.N. Fetene, Rajkumar Shufen and U.S. Dixit, |
FEM based neural network modelling of laser assisted bending |
Neural Computing & Applications |
|
- |
| 544 |
2017 |
W.G. Jiru, M. Ravi Sankar and U.S. Dixit |
Investigation of microstructure and microhardness in laser surface alloyed aluminum with TiO2 and SiC powders |
Materials Today: Proceedings |
|
- |
| 545 |
2017 |
VK Jain, KK Saren, V Raghuram, MR Sankar |
Force analysis of magnetic abrasive nano-finishing of magnetic and non-magnetic materials |
International Journal of Advanced Manufacturing Technology |
|
- |
| 546 |
2017 |
D. Yadav, L. Barbora, L. Rangan. P. Mahanta |
Tea waste and food waste as a potential feedstock for biogas production |
Environmental Progress and Sustainable Energy |
|
- |
| 547 |
2017 |
Pranab K. Mondal, S. Wongwises |
Irreversibility analysis in a low Peclet-number electroosmotic transport through an asymmetrically heated microchannel |
International Journal of Exergy |
|
- |
| 548 |
2017 |
P Kaushik, Pranab K. Mondal, Sukumar pati , Suman Chakraborty |
Heat transfer and entropy generation characteristics of a non-Newtonian fluid squeezed and extruded between two parallel plates |
ASME Journal of Heat Transfer |
|
- |
| 549 |
2017 |
V. Satheeshkumar, R. Ganesh Narayanan |
Predicting the tensile behaviour of adhesively bonded sheets using equivalent geometrical heterogeneities |
International Journal of Material Forming |
|
- |
| 550 |
2017 |
L. Ram and D. Sharma |
Evolutionary and GPU Computing for Topology Optimization of Structures |
Swarm and Evolutionary Computation |
|
- |
| 551 |
2017 |
D. Gayen, D. Chakraborty and R. Tiwari |
Whirl Frequencies and Critical Speeds of a Rotor-Bearing System with a Cracked Functionally Graded Shaft - Finite Element Analysis |
European Journal of Mechanics - A/Solid |
|
- |
| 552 |
2017 |
D Chakraborty, D. Chakraborty and K. S. R. K. Murthy |
A Strain Gage Technique for the Determination of Mixed Mode Stress Intensity Factors of Orthotropic Materials |
Composite Structures |
|
- |
| 553 |
2017 |
M. Sharma, P. Mahanta and S.C. Mishra |
Usability of porous burner in kerosene pressure stove: an investigation through energy and exergy analyses |
Energy |
|
- |
| 554 |
2017 |
S.C. Mishra, N. Gullipalli, A. Jain, A. Barurah, and A. Mukherjee |
Analysis of hyperbolic heat conduction in 1-D planar, cylindrical and spherical geometry using the lattice Boltzmann method |
International Communications in Heat and Mass Transfer |
|
- |
| 555 |
2017 |
V.K. Mishra, S.C. Mishra and D.N. Basu |
Simultaneous estimation of parameters in analyzing porous medium combustion - Assessment of seven optimization tools |
Numerical Heat Transfer, Part A |
|
- |
| 556 |
2017 |
V.K. Mishra, S.C. Mishra and D.N. Basu |
Simultaneous estimation of four parameters in a combined mode heat transfer in 2-D porous matrix with heat generation |
Numerical Heat Transfer, Part A |
|
- |
| 557 |
2017 |
S.C. Mishra, S. Panigrahy and V.J. Ghatage |
Analysis of combined mode heat transfer in a porous medium using lattice Boltzmann method |
Numerical Heat Transfer, Part A |
|
- |
| 558 |
2017 |
V. Yadav, A.K. Singh and U.S. Dixit |
Experimental validation of strategy for the inverse estimation of mechanical properties and coefficient of friction in flat rolling, Journal of Institution of Engineers, Series |
Journal of Institution of Engineers, Series (C) |
|
- |
| 559 |
2017 |
B. Das, S. Bag and S. Pal |
Probing weld quality monitoring in friction stir welding through characterization of signals by fractal theory |
Journal of Mechanical Science and Technology |
|
- |
| 560 |
2017 |
D. Yaduwanshi, S. Bag and S. Pal |
On the effect of tool offset in hybrid FSW of copper and aluminium alloy |
Materials and Manufacturing Processes |
|
- |
| 561 |
2017 |
M. Baruah and S. Bag |
Microstructural influence on mechanical properties in plasma microwelding of Ti6Al4V alloy |
Journal of Materials Engineering and Performance |
|
- |
| 562 |
2017 |
B. Das, S. Pal and S. Bag |
Weld quality prediction in friction stir welding using wavelet analysis |
International Journal of Advanced Manufacturing Technology |
|
- |
| 563 |
2017 |
Mondal Arpan Kumar, Lohit Anche, Biswas Pankaj and Das Manas |
Prediction of weld induced distortion of large structure using equivalent load technique |
IMechE-Part-B |
|
- |
| 564 |
2017 |
Mondal Arpan Kumar, Biswas Pankaj and Bag Swarup |
Prediction of weld induced residual stress and angular distortion of single sided and double sided fillet joint by SAW process |
International Journal of Steel Structure |
|
- |
| 565 |
2017 |
Sujoy Tikader, Biswas Pankaj & Asit Puri |
A Study on Tooling and Its Effect on Heat Generation and Mechanical Properties of Welded Joints in Friction Stir Welding |
Journal of The Institution of Engineers (India): Series C |
|
- |
| 566 |
2017 |
S. Karmakar, N. Kalita, A. Banerjee |
Optimum placement of shape memory alloy wire actuator |
Journal of Mechanical Engineering science |
|
- |
| 567 |
2017 |
Bhardwaj, S., Randive, P. and Dalal, A. |
Lattice Boltzmann Simulations of Coalescence of Two Droplets on a Rectangular Channel Wall Considering Eetting Effects |
Progress in Computational Fluid Dynamics |
|
- |
| 568 |
2017 |
Meshram, P., Bhardwaj, S., Dalal, A. and Pati, S. |
Effect of inclination angle on natural convection heat transfer and entropy generation in square porous enclosure |
Numerical Heat Transfer- Part A |
|
- |
| 569 |
2017 |
N. Shanmuga Priya, Chandramohan Somayaji, and S. Kanagaraj |
Synthesis and characterization of Nd3+ doped Ce0.6Zr0.4O2 and its doping significance on oxygen storage capacity |
Rare Metals |
|
- |
| 570 |
2017 |
Manish Kumar, N. Shanmuga Priya, S. Kanagaraj and G. Pugazhenthi. |
Melt rheological behavior of PMMA nanocomposites reinforced with modified nanoclay. |
Nanocomposites, DOI: 10.1080/20550324.2016.1221876, 2016 |
|
- |
| 571 |
2017 |
Joshi, S. N. and G. Bolar |
Three-Dimensional Finite Element Based Numerical Simulation of Machining of Thin-Wall Components with Varying Wall Constraints. |
Journal of The Institution of Engineers (India), Series C |
|
- |
| 572 |
2017 |
J.R. Pati, Dutta, S., Eliaers, P. Mahanta, Chatterjee, P.K., De Wilde, J. |
Experimental study of paddy drying in a vortex chamber |
Drying Technology |
|
- |
| 573 |
2017 |
Prakash Kumar Sahu and Sukhomay Pal |
Influence of Metallic Foil Alloying by FSW Process on Mechanical Properties and Metallurgical Characterization of AM20 Mg Alloy |
Materials Science and Engineering: A |
684 |
442-445 |
| 574 |
2017 |
H. Gaikwad, D.N. Basu, P.K. Mondal |
Slip Driven Micro-pumping of Binary System with A Layer of Non-conducting Fluid under Electrical Double Layer Phenomenon |
Colloids and Surfaces A: Physicochemical and Engineering Aspects |
518 |
166-172 |
| 575 |
2017 |
D. Shankar, D.N. Basu, M. Pandey |
Development and analysis of a novel scaling methodology for stability appraisal of supercritical flow channels |
Nuclear Engineering and Design |
323 |
46-55 |
| 576 |
2017 |
Arvind K Agrawal |
Joining of a tube to a sheet through end curling |
Journal of Materials Processing Technology |
246 |
291-304 |
| 577 |
2017 |
Prakash Kumar Sahu and Sukhomay Pal |
Mechanical Properties of Dissimilar Thickness Aluminium Alloy weld by Single/Double Pass FSW |
Journal of Materials Processing Technology |
243 |
442-455 |
| 578 |
2017 |
Kumar, Sunny and Sarma, Bhaskarjyoti and Dasmahapatra, Ahsok Kumar and Dalal, Amaresh and Basu, Dipankar Narayan and Bandyopadhyay, Dipankar |
Field induced anomalous spreading, oscillation, ejection, spinning, and breaking of oil droplets on a strongly slipping water surface |
Faraday Discuss. |
199 |
115-128 |
| 579 |
2017 |
Kumar, S., Sarma, B., Dalal, A., Basu, D., Dasmahapatra, A. K., and Bandyopadhyay, D. |
Field Induced Anomalous Spreading, Oscillation, Ejection, Spinning, and Breaking of Oil Droplets on Strongly Slipping Water Surface |
Faraday Discussions |
199 |
115-128 |
| 580 |
2017 |
Debaleena Chakraborty, D. Chakraborty and K. S. R. Krishna Murthy |
Experimental determination of mode I stress intensity factor in orthotropic materials using a single strain gage |
Engineering Fracture Mechanics |
173 |
130-145 |
| 581 |
2017 |
Poonam Kumari, A. Shakya |
Two-Dimensional Solution of Piezoelectric Plate Subjected to Arbitrary Boundary Conditions using Extended Kantorovich Method |
Procedia Engineering |
173 |
1523-1530 |
| 582 |
2017 |
Ishwar Kapoor, R. Ganesh Narayanan, Scott Taylor, Vit Janik, Richard Dashwood |
Predicting the warm forming behavior of WE43 and AA5086 alloys |
Proceedia Engineering |
173 |
897-904 |
| 583 |
2017 |
S. S. Gautam and P. M. Dixit |
Simulation of Large Deformation Elasto-plastic Impact Problems Using Two Different Objective Stress Measures |
Procedia Engineering |
172 |
432-439 |
| 584 |
2017 |
Poonam Kumari, Agyapal Singh, R.K.N.D. Rajapakse, Santosh Kapuria |
Three-dimensional static analysis of Levy-type functionally graded plate with in-plane stiffness variation |
Composite Structures |
168 |
780-791 |
| 585 |
2017 |
K. K. Gajrani, D. Ram, M. Ravi Sankar |
Biodegradation and hard machining performance comparison of eco-friendly cutting fluid and mineral oil using flood cooling and minimum quantity cutting fluid techniques |
Journal of Cleaner Production |
165 |
1420-1435 |
| 586 |
2017 |
Hakeem Niyas,Chilaka RCR, Muthukumar P |
Performance Investigation of a lab–scale latent heat storage prototype - Experimental results, |
Solar Energy |
155 |
971-984 |
| 587 |
2017 |
Rabha DK, Muthukumar P, Somayaji C |
Performance Studies on a Forced Convection Solar Dryer Integrated With a Paraffin Wax−Based Latent Heat Storage System. |
Solar Energy |
149 |
214-226 |
| 588 |
2017 |
Bhardwaj, S., and Dalal, A. |
Mesoscopic Analysis of Dynamic Droplet Behavior on Wetted Flat and Grooved Surface for Low Viscosity Ratio |
ASME Journal of Heat Transfer |
139 |
052002-1-052002-11 |
| 589 |
2017 |
Sachin Singh, Deepu Kumar, M. Ravi Sankar |
Experimental, Theoretical, and Simulation Comparative Study of Nano Surface Roughness Generated during Abrasive Flow Finishing (AFF) Process |
ASME Journal of Manufacturing Science and Engineering |
139 |
061014-1-061014-12 |
| 590 |
2017 |
A. Kumar, S. Panda |
Optimal Damping in Circular Cylindrical Sandwich Shells With a Three-Layered Viscoelastic Composite Core |
ASME Journal of Vibration and Acoustics |
139 |
061003-1-061003-12 |
| 591 |
2017 |
Hakeem Niyas, Sunku Prasad, P. Muthukumar |
Performance investigation of a lab-scale latent heat storage prototype - Numerical results, |
Energy Conversion and Management |
135 |
188-199 |
| 592 |
2017 |
N. Muthu, S.K. Maiti, B.G. Falzon, Wenyi Yan |
Modelling Interacting Cracks using Level Set Method using the element-free Galerkin method |
International Journal of Mechanical Sciences |
134 |
203-215 |
| 593 |
2017 |
Kiran Naik B, Muthukumar P |
A Novel Approach for Performance Assessment of Mechanical Draft Wet Cooling Towers, |
Applied Thermal Engineering |
121 |
14-26 |
| 594 |
2017 |
H. Gaikwad, D.N. Basu, P.K. Mondal |
Non-linear Drag Induced Irreversibility Minimization in a Viscous Dissipative Flow Through a Micro-porous Channel |
Energy |
119 |
588-600 |
| 595 |
2017 |
Poonam Kumari, S. Behera |
Three-dimensional free vibration analysis of levy-type laminated plates using multi-term extended Kantorovich method |
Composites Part B: Engineering |
116 |
224-238 |
| 596 |
2017 |
Srivastava, H., Dalal, A., Sahu, K. C., and Biswas, G. |
Temporal Linear Stability Analysis of an Entry Flow in a Channel with Viscous Heating |
International Journal of Heat and Mass Transfer |
109 |
922-929 |
| 597 |
2017 |
Kiran Naik B, Choudhary V, Muthukumar P, Somayaji, C |
Performance Assessment of a Counter Flow Cooling Tower – Unique Approach |
,Energy Procedia |
109 |
243-252 |
| 598 |
2017 |
Kiran Naik B, Muthukumar P |
Empirical correlation based models for estimation of air cooled and water cooled condenser’s performance. |
Energy Procedia |
109 |
293-305 |
| 599 |
2017 |
Lakshmia DVN, Apurba Layek, Muthukumar, P |
Performance Analysis of Trapezoidal Corrugated Solar Air Heater with Sensible Heat Storage Material. |
Energy Procedia |
109 |
463-470 |
| 600 |
2017 |
Muthukumar, P and Lakshmia DVN |
Nucleation Enhancement Studies on Aqueous Salt Solutions. |
Energy Procedia |
109 |
174-180 |
| 601 |
2017 |
Parmananda, M., Khan, S., Dalal, A., and Natarajan, G. |
Critical Assessment of Numerical Algorithms for Convective-Radiative Heat Transfer in Enclosures with Different Geometries |
International Journal of Heat and Mass Transfer |
108 |
627-644 |
| 602 |
2017 |
H. Gaikwad, P. K. Mondal, S. Wongwises |
Non-linear drag induced entropy generation analysis in a microporous channel: The effect of conjugate heat transfer |
International Journal of Heat Mass Transfer |
108 |
2217-2228 |
| 603 |
2017 |
M. Krishnani, D.N. Basu |
Computational Stability Appraisal of Rectangular Natural Circulation Loop: Effect of Loop Inclination |
Annals of Nuclear Energy |
107 |
17-30 |
| 604 |
2017 |
Rabha DK, Muthukumar P, Somayaji C |
Energy and exergy analyses of the solar drying processes of Ghost Chilli Pepper and Ginger. |
Renewable Energy |
105 |
764-773 |
| 605 |
2017 |
Rabha, DK, Muthukumar P |
Experimental Investigation of Thin Layer Drying Kinetics of Ghost Chill Pepper (Capsicum Chinense Jacq.) Dried in a Forced Convection Solar Tunnel Dryer. |
Renewable Energy |
105 |
583-589 |
| 606 |
2017 |
P. Saha, G. Biswas, A.C. Mandal and S. Sarkar |
Investigation of coherent structures in a turbulent channel with built-in longitudinal vortex generators |
International Journal of Heat and Mass Transfer |
104 |
178-198 |
| 607 |
2017 |
Bipul Das, Sukhomay Pal and Swarup Bag |
Design and Development of force and torque measurement setup for real time monitoring of friction stir welding process |
Measurement |
103 |
186-198 |
| 608 |
2017 |
M. P. Borthakur, G. Biswas, and D. Bandyopadhyay |
Formation of liquid drops at an orifice and dynamics of pinch-off in liquid jets |
Physical Review E |
96 |
013115-1-013115-11 |
| 609 |
2017 |
Srinivas R. Gorthi, P. K. Mondal, G. Biswas |
Magnetic-field-driven alteration in capillary filling dynamics in a narrow fluidic channel |
Physical Review E |
96 |
013113-1-13113-14 |
| 610 |
2017 |
Nath, B., Biswas, G., Dalal, A., and Sahu, K. C. |
Migration of a Droplet in a Cylindrical Tube in the Creeping Flow Regime |
Physical Review E |
95 |
033110-1-033110-11 |
| 611 |
2017 |
M. Baruah and S. Bag |
Influence of pulsation in thermo-mechanical analysis on laser microwelding of Ti6Al4V alloy |
Optics & Laser Technology |
90 |
40-51 |
| 612 |
2017 |
Kapadia, H., Dalal, A., and Sarkar, S. |
Forced Convective Flow and Heat Transfer Past an Unconfined Blunt Headed Cylinder |
Numerical Heat Transfer Part A |
72 |
372-388 |
| 613 |
2017 |
A. Mukherjee, S. C. Mishra, P. K. Mondal |
Numerical analysis of combined mode dual-phase-lag heat conduction and radiation in an absorbing, emitting and scattering cylindrical medium |
Numerical Heat Transfer: Part-A |
71 |
769-788 |
| 614 |
2017 |
M. Baruah and S. Bag |
Characteristicdifference of thermo-mechanical behavior in plasma microwelding of steels |
Welding in the World |
61 |
857-871 |
| 615 |
2017 |
Chandrahas Patel, Pravin Ghatule, Sachin D Kore |
Finite element analysis of effect of process parameters on electromagnetic free expansion of aluminium tube |
International Journal of Materials and Product Technology |
54 |
165-178 |
| 616 |
2017 |
Arvind K Agrawal, R. Ganesh Narayanan, Satish V Kailas |
End forming behaviour of friction stir processed Al6063-T6 tubes at different tool rotational speeds |
Journal of Strain Analysis for Engineering Design |
52 |
434-449 |
| 617 |
2017 |
M.K.S. Sarkar, D.N. Basu |
Numerical Comparison of Thermalhydraulic Aspects of Supercritical Carbon Dioxide and Subcritical Water-based Natural Circulation Loop |
Nuclear Engineering and Technology |
49 |
103-112 |
| 618 |
2017 |
Sumant Pushp, Adity Saikia, Arif Khan and Shyamanta Hazarika |
A Cognitively Enhanced Collaborative Control Architecture for an Intelligent Wheelchair: Formalization, Implementation, and Evaluation |
Cognitive Systems Research |
49 |
114-127 |
| 619 |
2017 |
Prakash Kumar Sahu, Sukhomay Pal and Surjya K. Pal |
Al/Cu Dissimilar FSW with Ni, Ti and Zn Foil as Interlayer for Flow Control, Enhancing Mechanical and Metallurgical Properties |
Metallurgical and Materials Transactions A |
48 |
3300-3317 |
| 620 |
2017 |
R. Kumar and S. D. Kore |
Electromagnetic Crimping in Tube-to-Cylinder Configuration: Influence of the Base Profiles on the Joint Quality |
Journal of Testing and Evaluation |
46 |
1-14 |
| 621 |
2017 |
H. Sarangi, K.S.R.K. Murthy and D. Chakraborty |
Accurate measurement of mixed mode (I/II) stress intensity factors using strain gages |
ASTM: Journal of Testing and Evaluation |
45 |
751-762 |
| 622 |
2017 |
U.S. Tejaswini, D.N. Basu, M. Pandey |
Improved Scaling Analysis for Heat Transfer in a Circular Tube with Various Supercritical Fluids using Computational Fluid Dynamics Simulations |
Heat Transfer Engineering |
38 |
149-161 |
| 623 |
2017 |
S. Timung, J. Chaudhuri, M. P. Borthakur, T. K. Mandal, G. Biswas and D. Bandyopadhyay |
Electric field mediated spraying of miniaturized droplets inside microchannel |
Electrophoresis |
38 |
1450-1457 |
| 624 |
2017 |
H. Gaikwad, P. K. Mondal |
Slip driven electroosmotic transport through porous media |
Electrophoresis |
38 |
596-606 |
| 625 |
2017 |
P. Kishore Kumar, M. Charan, and S. Kanagaraj. |
Trends and challenges in lower limb prostheses |
IEEE potentials |
36 |
19-23 |
| 626 |
2017 |
A Bhowmick, SM Hazarika |
An insight into assistive technology for the visually impaired and blind people: state-of-the-art and future trends |
Journal on Multimodal User Interfaces |
11 |
149-172 |
| 627 |
2017 |
A Saikia, SM Hazarika |
cBDI: Towards an Architecture for Human–Machine Collaboration |
International Journal of Social Robotics |
9 |
211-230 |
| 628 |
2017 |
Arbind Prasad, M. Ravi Sankar, Vimal Katiyar |
State of Art on Solvent Casting Particulate Leaching Method for Orthopedic Scaffolds Fabrication |
Materials Today: Proceedings |
4 |
898-907 |
| 629 |
2017 |
Arbind Prasad, Siddhart Mohan Bhasney, M. Ravi Sankar, Vimal Katiyar |
Fish Scale Derived Hydroxyapatite reinforced Poly (Lactic acid) Polymeric Bio-films: Possibilities for Sealing/locking the Internal Fixation Devices |
Materials Today: Proceedings |
4 |
1340-1349 |
| 630 |
2017 |
Kishor Kumar Gajrani, M. Ravi Sankar |
State of the art on micro to nano textured cutting tools |
Materials Today: Proceedings |
4 |
3776-3785 |
| 631 |
2017 |
Kishor Kumar Gajrani, M. Ravi Sankar |
Past and current status of eco-friendly vegetable oil based metal cutting fluids |
Materials Today: Proceedings |
4 |
3786-3795 |
| 632 |
2017 |
P.P. Dutta, K. Kalita, U.S. Dixit and H. Liao |
Magnetic-force-assisted straightening of bent mild steel strip by laser irradiation |
Lasers in Manufacturing and Materials Processing |
4 |
206-226 |
| 633 |
2017 |
A. Gupta, A. Prasad, N. Mulchandani, M. Shah, M. Ravi Sankar, S. Kumar, V. Katiyar |
Toughened Stereocomplex Polylactic Acid-Nano Hydroxyapatite Biocomposites with Improved Thermo-mechanical and Gas Barrier Properties: A Potential candidate for Biomedical and Engineering Applications |
American Chemical Society (ACS) Omega |
2 |
4039-4052 |
| 634 |
2017 |
R. Ranjan Behera, P. M. Babu, K. Kumar Gajrani, M. Ravi Sankar |
Fabrication of micro-features on 304 stainless steel (SS-304) using Nd:YAG laser beam |
International Journal of Additive and Subtractive Materials Manufacturing |
1 |
338-359 |
| 635 |
2017 |
U.S. Dixit, Vinod Yadav, Varun Sharma, Pulak M. Pandey, Anish Roy and Vadim Silberschmidt |
Estimation of cutting forces in conventional and ultrasonic-vibration assisted turning using inverse modelling |
International Journal of Additive and Subtractive Materials Manufacturing |
1 |
265-289 |
| 636 |
2017 |
Kishor Kumar Gajrani, Dhanna Ram, Ravi Sankar Mamilla, Uday Shanker Dixit, P.S. Suvin and Satish Vasu Kailas |
Machining of hardened AISI H-13 steel using minimum quantity eco-friendly cutting fluid |
International Journal of Additive and Subtractive Materials Manufacturing |
1 |
240-256 |
| 637 |
2017 |
R. Kalidasan, S. Senthilvelan, and U. S. Dixit |
An experimental study of surface roughness in double tool turning process |
International Journal of Additive and Subtractive Materials Manufacturing |
1 |
310-327 |
| 638 |
2017 |
Ketema Bobe Bonsa, Woldetinsay Jiru, Mamilla Ravi Sankar, U. S. Dixit |
Experimental Study and Empirical Modelling of Laser Surface Finishing of Silicon Carbide |
International Journal of Additive and Subtractive Materials Manufacturing |
1 |
290-309 |
| 639 |
2016 |
S.M. Kamal and U.S. Dixit |
A comparative study of thermal and hydraulic autofrettage |
Journal of Mechanical Science and Technology |
30 |
2483-2496 |
| 640 |
2016 |
Desai, S., Kulkarni, V., and Gadgil, H |
Delusive Influence of Nondimensional Numbers in Canonical Hypersonic Nonequilibrium Flows |
J. Aerosp. Eng. |
29 |
1-10 |
| 641 |
2016 |
V. Pandey, G. Biswas, and A. Dalal |
Effect of superheat and electric field on saturated film boiling |
Physics of Fluids |
28 |
1-18 |
| 642 |
2016 |
S. Kumar, S. Bag and M. Baruah |
Finite element model for femtosecond laser pulse heating using dual phase lag effect |
Journal of Laser Applications |
28 |
1-10 |
| 643 |
2016 |
R. K. Arun, N. Priyadarshini, K. Chaudhury, N. Chanda, G. Biswas and S. Chakraborty |
Paper-PDMS hybrid microchannel: a platform for rapid fluid-transport and mixing |
J. Micromech. Microeng |
26 |
1-9 |
| 644 |
2016 |
R. Kore, A. Waychal, S. Agarwal, P. Yadav, A.Uddin, N. Sahoo and A. Shelke |
Impact induced solitary wave propagation through woodpile structure |
Smart Materials and Structures |
25 |
25027-25037 |
| 645 |
2016 |
Ravi Peetala, Vinayak Kulkarni and Niranjan Sahoo |
Conjugate heat transfer analysis for finite thickness cylinder in hypersonic flow |
Heat transfer ? Asian Research, |
25 |
163-180 |
| 646 |
2016 |
W.G. Jiru, M. Ravi Sankar and U.S. Dixit |
Laser surface alloying of copper, manganese and magnesium with pure aluminum substrate |
Journal of Materials Engineering and Performance |
25 |
1172-1181 |
| 647 |
2016 |
H. Gurung, A. Banerjee |
Development of an extended Kalman filter for the self-sensing application of a spring-biasedshape memory alloy wire actuator |
Smart Materials and structures- IOP science |
25 |
- |
| 648 |
2016 |
Kant R. and Joshi S.N. |
Thermo-mechanical studies on bending mechanism, bend angle and edge effect during multi-scan laser bending of magnesium M1A alloy sheets. |
Journal of Manufacturing Processes |
23 |
135-148 |
| 649 |
2016 |
Bipul Das, Sukhomay Pal, Swarup Bag |
A combined wavelet packet and Hilbert-Huang transform for defect detection and modelling of weld strength in friction stir welding process |
Journal of Manufacturing Processes |
22 |
260-268 |
| 650 |
2016 |
B. Das, S. Pal and S. Bag |
A combined Wavelet packet and Hilbert-Huang transform for defect detection and modeling of weld strength in friction stir welding process |
Journal of Manufacturing Processes |
22 |
260-268 |
| 651 |
2016 |
B. Das, S. Pal and S. Bag |
Monitoring of friction stir welding process using weld image information |
Science and Technology of Welding and Joining |
21 |
317-324 |
| 652 |
2016 |
P S Rama Sreekanth, S Kanagaraj |
Effect of multi walled carbon nanotubes reinforcement and gamma irradiation on viscoelastic properties of Ultra high molecular weight polyethylene |
Materials Research Innovations |
20 |
198-205 |
| 653 |
2016 |
R. Kalidasan, M. Yatin, D.K. Sarma, S. Senthilvelan and U.S. Dixit |
An experimental study of cutting forces and temperature in multi-tool turning of grey cast iron |
International Journal of Machining and Machinability of Materials |
18 |
540-551 |
| 654 |
2016 |
Kishor Kumar Gajrani, Rokkham Pavan Kumar Reddy, M. Ravi Sankar |
Experimental comparative study of conventional, micro-textured and coated micro-textured tools during machining of hardened AISI 1040 alloy steel |
International Journal of Machining and Machinability of Materials |
18 |
522-539 |
| 655 |
2016 |
Bikramjit Basu Debasish Sarkar, B. Sambi Reddy, Sourav Mandal, M. Ravi Sankar |
Uniaxial Compaction-Based Manufacturing Strategy and 3D Microstructural Evaluation of Near-Net-Shaped ZrO2-Toughened Al2O3 Acetabular Socket |
Advanced Engineering Materials |
18 |
1634-1644 |
| 656 |
2016 |
Kodeeswaran, M., Verma, A., Suresh, R., Senthilvelan, S. |
Bi-directional and uni-directional bending fatigue performance of unreinforced and carbon fiber reinforced polyamide 66 spur gears |
International Journal of Precision Engineering and Manufacturing |
17 |
1025-1033 |
| 657 |
2016 |
Mertens, A.J., Senthilvelan, S. |
Durability of polymer gear-paired with steel gear manufactured by wire cut electric discharge machining and hobbing |
International Journal of Precision Engineering and Manufacturing |
17 |
181-188 |
| 658 |
2016 |
R.K. Arun, P. Singh, G. Biswas, N. Chanda and S. Chakraborty |
Energy generation from water flow over a reduced graphene oxide surface in a paper?pencil device |
Lab-on-a-Chip |
16 |
3589-3596 |
| 659 |
2016 |
Meshram, P., Bhardwaj, S., and Dalal, A. |
Numerical Investigation of Two Dimensional Natural Convection and Entropy Generation inside a Porous Square Enclosure with Sinusoidally Heated Wall |
Progress in Computational Fluid Dynamics |
16 |
88-101 |
| 660 |
2016 |
A. Ganguly, D.N. Basu |
Analysis of a Solar Photovoltaic Assisted Absorption Refrigeration System for Domestic Airconditioning |
International Journal of Green Eneegy |
13 |
585-594 |
| 661 |
2016 |
Nicolas Suas-David, Vinayak Kulkarni, Abdessamad Benidar, Samir Kassi and Robert Georges |
Line Shape in a Free-jet Hypersonic Expansion Investigated by Cavity Ring-down Spectroscopy and Computational Fluid Dynamics |
Chemical Physics Letters |
659 |
209-215 |
| 662 |
2016 |
A. Hens, K. Mondal, G. Biswas and D. Bandyopadhyay |
Pathways from disordered to ordered nanostructures from defect guided dewetting of ultrathin bilayers |
Journal of Colloid and Interface Science |
465 |
128-139 |
| 663 |
2016 |
Kumar, M., Kumar, V., Muthuraja, A., Senthilvelan, S., Pugazhenthi, G. |
Influence of Nanoclay on the Rheological Properties of PMMA/Organoclay Nanocomposites Prepared by Solvent Blending Technique |
Macromolecular Symposia |
365 |
104-111 |
| 664 |
2016 |
K. Borah, G. Natarajan, A. K. Dass |
A novel second-order flux splitting for ideal magnetohydrodynamics |
Journal of Computational Physics |
313 |
159-180 |
| 665 |
2016 |
H. Gurung, A. Banerjee |
Self-sensing Shape Memory Alloy wire actuator based on Unscented Kalman Filter |
Sensors and Actuators A: Physical |
251 |
258-265 |
| 666 |
2016 |
Prakash Kumar Sahu, Sukhomay Pal, Surjya K. Pal, Rahul Jain |
Influence of plate position, tool offset and tool rotational speed on mechanical properties and microstructures of dissimilar Al/Cu friction stir welding joints |
Journal of Materials Processing Technology |
235 |
55-67 |
| 667 |
2016 |
M. Baruah and S. Bag |
Influence of heat input in microwelding of titanium alloy by micro plasma arc |
Journal of Materials Processing Technology |
231 |
100-112 |
| 668 |
2016 |
P Abhimanyu, P Kaushik, Pranab K. Mondal, Suman Chakraborty |
Transiences in rotational electro-hydrodynamics microflows of a viscoelastic fluid under electrical double layer phenomena |
Journal of Non-Newtonian Fluid Mechanics |
231 |
56-67 |
| 669 |
2016 |
M. Kalyan and R. Tiwari |
Multi-Objective Optimization of Needle Roller Bearings Based on Fatigue and Wear Using Evolutionary Algorithm |
Proceedings of IMechE, Part J: Journal of Engineering Tribology |
230 |
170-185 |
| 670 |
2016 |
A Johnney Mertens and S Senthilvelan |
Durability enhancement of polymer gear using compressed air cooling |
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications |
230 |
515-525 |
| 671 |
2016 |
S.M. Kamal and U.S. Dixit |
A study on enhancing the performance of thermally autofrettaged cylinder through shrink-fitting |
ASME. Journal of Manufacturing Science and Engineering |
183 |
1-5 |
| 672 |
2016 |
D.N. Basu, A. Ganguly |
Solar Thermal-Photovoltaic Powered Potato Cold Storage ? Conceptual Design and Performance Analyses |
Applied Energy |
165 |
308-317 |
| 673 |
2016 |
D. Gayen and D. Chakraborty |
Variation of Local Flexibility Coefficient of Functionally Graded Cracked Shafts |
Procedia Engineering |
144 |
1443-1450 |
| 674 |
2016 |
S. R. Nanda, V. Kulkarni and N. Sahoo |
Design of artificial neuro-fuzzy based methodology for six component force balance |
Procedia Engineering |
144 |
528-536 |
| 675 |
2016 |
B. Das, S. Pal and S. Bag |
Defect Detection in Friction Stir Welding Process Using Signal Information and Fractal Theory |
Procedia Engineering |
144 |
172-178 |
| 676 |
2016 |
S. Mahto, A.K. Gogoi, U.S. Dixit |
A comparative study of improved dynamics of single link flexible revolute-jointed robotic manipulator |
Procedia Engineering |
144 |
425-434 |
| 677 |
2016 |
B. Das, S. Pal and S. Bag |
Defect detection if friction stir welding process using signal information and fractal theory |
Procedia Engineering |
144 |
172-178 |
| 678 |
2016 |
H. Gurung, A. Banerjee |
Self-sensing SMA Actuator using Extended Kalman Filter and Artificial Neural Network |
Procedia Engineering |
144 |
629-634 |
| 679 |
2016 |
A. Garg, S.K. Dwivedy |
Nonlinear Dynamics of Axially Loaded Piezoelectric Energy Harvester |
Procedia Engineering |
144 |
592-599 |
| 680 |
2016 |
Tarigopula Praveen Kumar, Santosha K. Dwivedy |
Dynamic Analysis of MRE Embedded Sandwich Plate Using FEM |
Procedia Engineering |
144 |
721-726 |
| 681 |
2016 |
Praveen Kumar, S.K. Dwivedy, Poonam Kumari |
Dynamic Analysis of Piezoelectric Based Energy Harvester under Periodic Excitation |
Procedia Engineering |
144 |
635-644 |
| 682 |
2016 |
A. Raj, A. Garg, S.K. Dwivedy |
Nonlinear Dynamics of Energy Harvester Based on Flow Induced Vibration |
Procedia Engineering |
144 |
936-944 |
| 683 |
2016 |
S. Mohanty, S.K. Dwivedy |
Linear and Nonlinear Analysis of Piezoelectric Based Vibration Absorber with Acceleration Feedback |
Procedia Engineering |
144 |
584-591 |
| 684 |
2016 |
Mali Akshay R, Kalita K., Reddy A. N., |
Solution of Linear Time Periodic Dynamical System with Application to Electrical Machines Using Chebyshev Polynomial Approach |
Procedia Engineering |
144 |
162-172 |
| 685 |
2016 |
Yeshwant S. S., Kumar S., Jain K. K., Behera S. K., Gandhi D., Raghavendra S., Kalita K., |
Design of Suspension System for Formula Student Race Car |
Procedia Engineering |
144 |
1138-1149 |
| 686 |
2016 |
Kumar G., Choudhury M. D., Natesan S., Kalita K., |
Design and Analysis of a Radial Active Magnetic Bearing for Vibration Control. |
Procedia Engineering |
144 |
810-816 |
| 687 |
2016 |
Kumar G., Kalita K., |
Vibration Control using BCW Induction Motor |
Procedia Engineering |
144 |
94-101 |
| 688 |
2016 |
Ahmed F., Kumar G., Choudhury M.D., Kalita K., |
Bridge Configured Wounded Switched Reluctance Motor |
Procedia Engineering |
144 |
817-824 |
| 689 |
2016 |
S. Peter and A. K. De |
Energy Transfer and Associated Forces in Fluid-structure Interactions |
Procedia Engineering |
144 |
1220-1225 |
| 690 |
2016 |
B. J. Bora and U. K. Saha |
Theoretical performance limits of a biogas?diesel powered dual fuel diesel engine for different combinations of compression ratio and injection timing |
ASCE Journal of Energy Engineering |
142 |
1-9 |
| 691 |
2016 |
Kumari, P., Behera, S., Kapuria |
Coupled three-dimensional piezoelasticity solution for edge effects in Levy-type rectangular piezolaminated plates using mixed field extended Kantorovich method |
Composite Structures |
140 |
491-505- |
| 692 |
2016 |
S. Sarma, N. Sahoo and A. Unal |
Thin film gauges using carbon nanotubes as composite layers |
ASME Journal of Engineering Materials and Technology |
138 |
1-8 |
| 693 |
2016 |
Prasenjit Khanikar, Qifeng Wu and M. A. Zikry |
Dynamic Fracture of Aluminum-Bonded Composites |
ASME Journal of Engineering Materials and Technology |
138 |
1-13 |
| 694 |
2016 |
B. J. Bora and U. K. Saha |
Estimating the theoretical performance limits of a biogas powered dual fuel diesel engine using emulsified rice bran biodiesel as pilot fuel |
ASME Journal of Energy Resources Technology |
138 |
1-10 |
| 695 |
2016 |
Jyoti Kumar Doley, Sachin D Kore |
A Study on Friction Stir Welding of Dissimilar Thin Sheet Aluminium Alloys AA 5052-AA 6061 |
Journal of Manufacturing Science and Engineering |
138 |
114502-114507 |
| 696 |
2016 |
S. Singh and R. Tiwari |
Model-Based Switching-Crack Identification in a Jeffcott Rotor with an Offset Disc Integrated with an Active Magnetic Bearing |
ASME, Journal of Dynamic Systems, Measurement and Control |
138 |
1-11 |
| 697 |
2016 |
S Kapil, P Eberhard, SK Dwivedy |
Dynamic analysis of cold-rolling process using the finite-element method |
ASME, Journal of Manufacturing Science and Engineering |
138 |
1-10 |
| 698 |
2016 |
Hakeem Niyas, Sunku Prasad, P. Muthukumar |
Performance investigation of a lab-scale latent heat storage prototype - Numerical results, |
Energy Conversion and Management |
135 |
188-199 |
| 699 |
2016 |
P. Kalita, A.K. Dass |
A diffusion-regulated scheme for the compressible Navier-Stokes equations using a boundary-layer sensor |
Computer and Fluids |
129 |
91-100 |
| 700 |
2016 |
S. Sarkar, S. Ganguly, G. Biswas and P. Saha |
Effect of cylinder rotation during mixed convective flow of nanofluids past a circular cylinder |
Computers and Fluids |
127 |
47-64 |
| 701 |
2016 |
S. Peter and A. K. De |
Wake instability modes for forced transverse oscillation of a sphere |
Ocean Engineering |
115 |
48-59 |
| 702 |
2016 |
M. Sharma, S. C. Mishra, P. Mahanta |
Effect of burner configuration and operating parameters on the performance of kerosene pressure stove with submerged porous medium combustion |
Applied Thermal Engineering |
107 |
516-523 |
| 703 |
2016 |
Rabha DK, Muthukumar P, Somayaji C |
Experimental Investigation of Thin Layer Drying Kinetics of Ghost Chill Pepper (Capsicum Chinense Jacq.) Dried in a Forced Convection Solar Tunnel Dryer. |
Renewable Energy |
105 |
583-589 |
| 704 |
2016 |
Rabha DK, Muthukumar P, Somayaji C |
Energy and exergy analyses of the solar drying processes of Ghost Chilli Pepper and Ginger. |
Renewable Energy |
105 |
764-773 |
| 705 |
2016 |
M.Krishnani |
On the Validity of Boussinesq Approximation in Transient Simulation of Single-phase Natural Circulation Loops |
International Journal of Thermal Sciences |
105 |
224-232 |
| 706 |
2016 |
S. Agarwal, N. Sahoo and R.K. Singh |
Experimental techniques for thermal product determination of coaxial surface junction thermocouples during short duration transient measurements |
International Journal of Heat and Mass Transfer |
103 |
327-335 |
| 707 |
2016 |
M. Sharma, P. Mahanta, S. C. Mishra |
Usability of porous burner in kerosene pressure stove: An experimental investigation aided by energy and exergy analyses |
Energy |
103 |
251-260 |
| 708 |
2016 |
A. Sinha, H. Chattopadhyay, A. K. Iyengar, G. Biswas |
Enhancement of heat transfer in a fin-tube heat exchanger using rectangular winglet type vortex generators |
International Journal of Heat and Mass Transfer |
101 |
667-681 |
| 709 |
2016 |
Muthukumar P, Manojkumar S Patil, Nithin Narmada R, Mohd Imran |
Parametric Investigations on Compressor-Driven Metal Hydride Based Cooling System |
Applied Thermal Engineering, |
97 |
87-99 |
| 710 |
2016 |
A. Mukherjee, A. Lahiri, and S.C. Mishra |
Analyses of dual-phase lag heat conduction in 1-D cylindrical and spherical geometry - an application of the lattice Boltzmann method |
International Journal of Heat and Mass Transfer |
96 |
627-642 |
| 711 |
2016 |
Ambesh Kumar and Satyajit Panda. |
Design of a 1-3 viscoelastic composite layer for improved free/constrained layer passive damping treatment of structural vibration |
Composites Part B: Engineering |
96 |
204-214 |
| 712 |
2016 |
S. Panigrahy, N.K. Mishra, S.C. Mishra, and P. Muthukumar |
Numerical and experimental analyses of LPG combustion in a domestic cooking stove with a porous radiant burner |
Energy |
95 |
404-414 |
| 713 |
2016 |
S. Panigrahy and S.C. Mishra |
Analysis of combustion of liquefied petroleum gas in a porous radiant burner |
International Journal of Heat and Mass Transfer |
95 |
488-498 |
| 714 |
2016 |
Deepak Kumar Yaduwanshi, Swarup Bag and Sukhomay Pal |
Numerical modeling and experimental investigation on plasma-assisted hybrid friction stir welding of dissimilar materials |
Materials and Design |
92 |
166-183 |
| 715 |
2016 |
D. Yaduwanshi, S. Bag and S. Pal |
Numerical modeling and experimental investigation on plasma assisted hybrid friction stir welding for dissimilar materials |
Materials & Design |
92 |
166-183 |
| 716 |
2016 |
B. J. Bora and U. K. Saha |
Optimisation of injection timing and compression ratio of a raw biogas powered dual-fuel diesel engine |
Applied Thermal Engineering |
92 |
111-121 |
| 717 |
2016 |
A. K. De |
A diffuse interface immersed boundary method for convective heat and fluid flow |
International Journal of Heat and Mass Transfer |
92 |
957-969 |
| 718 |
2016 |
Naik BK, Ankit Soni, Amit kumar, Muthukumar P, Somayajia C. |
Coupled Heat and Mass Transfer Analysis of an Adiabatic Dehumidifier ? Unique Approach. |
Energy Procedia |
90 |
305-315 |
| 719 |
2016 |
Naik BK,Varshney A, Muthukumar P, Somayajia C. |
Modelling and Performance Analysis of U Type Evacuated Tube Solar Collector Using Different Working Fluids. |
Energy Procedia |
90 |
227-237 |
| 720 |
2016 |
B. J. Bora and U. K. Saha |
Experimental evaluation of a rice bran oil methyl ester-biogas run dual fuel diesel engine at varying compression ratios |
Renewable Energy |
87 |
782-790 |
| 721 |
2016 |
D. Chakraborty, K.S.R.K. Murthy and D. Chakraborty |
Determination of KI in orthotropic laminates with double ended cracks using a single strain gage technique |
Theoretical and Applied Fracture Mechanics |
86 |
96-106 |
| 722 |
2016 |
N. Yadaiah, S. Bag, C. P. Paul and L. M. Kukreja |
Influence of self-protective atmosphere in fiber laser welding of austenitic stainless steel |
International Journal of Advanced Manufacturing Technology |
86 |
853-870 |
| 723 |
2016 |
Sachin Singh, A.S Arjun Raj, M. Ravi Sankar, V. K. Jain |
Finishing force analysis and simulation of nanosurface roughness in abrasive flow finishing process using medium rheological properties |
International Journal of Advanced Manufacturing Technology |
85 |
2163-2178 |
| 724 |
2016 |
V. K. Jain, J. Ramkumar |
Nano-finishing of cylindrical hard steel tubes using rotational abrasive flow finishing (R-AFF) process |
International Journal of Advanced Manufacturing Technology |
85 |
2179-2187 |
| 725 |
2016 |
Rasmi Ranjan Behera, Mamilla Ravi Sankar, J. Swaminathan, |
Experimental investigation of underwater laser beam micromachining (UW-LB?M) on 304 stainless steel |
International Journal of Advanced Manufacturing Technology |
85 |
1969-1982 |
| 726 |
2016 |
Bin R. W., Goel S., Davim J.P, and Joshi S. N. |
Parametric design optimization of hard turning of AISI 4340 steel |
International Journal of Advanced Manufacturing Technology |
82 |
451-462 |
| 727 |
2016 |
Debaleena Chakraborty, K.S.R.K. Murthy and D. Chakraborty |
Determination of KI in orthotropic laminates with double ended cracks |
Theoretical and Applied Fracture Mechanics |
82 |
96-106 |
| 728 |
2016 |
A. Sasmal and S.C. Mishra |
Analysis of conduction and radiation heat transfer in a differentially heated 2-D square enclosure |
Heat Transfer - Asian Research |
79 |
116-125 |
| 729 |
2016 |
D. Gayen, D. Chakraborty and R. Tiwari |
Whirl Frequencies and Critical Speeds of a Rotor-Bearing System with a Cracked Functionally Graded Shaft - Finite Element Analysis |
European Journal of Mechanics -A/ Solids |
61 |
47-58 |
| 730 |
2016 |
S. Arun, S. Kanagaraj |
Performance enhancement of epoxy based sandwich composites using multiwalled carbon nanotubes for the application of sockets in trans-femoral amputees. |
Journal of Mechanical Behavior of Biomedical Materials |
59 |
1-10 |
| 731 |
2016 |
N. Sahoo and R. Kumar |
Performance assessment of thermal sensors during short-duration convective surface heating measurements |
Heat and Mass Transfer |
52 |
2005-2013 |
| 732 |
2016 |
S. M. Kamal, A.Ch. Borsaikia and U. S. Dixit |
Experimental assessment of residual stresses induced by the thermal autofrettage of thick-walled cylinders |
Journal of Strain Analysis for Engineering Design |
51 |
144-160 |
| 733 |
2016 |
J. Kalivarapu, S. Jain and S. Bag |
An improved harmony search algorithm with dynamically varying bandwidth |
Engineering Optimization |
48 |
1091-1108 |
| 734 |
2016 |
H. Sarangi, K.S.R.K. Murthy and D. Chakraborty |
Accurate measurement of mixed mode (I/II) stress intensity factors using strain gages |
ASTM Journal of Testing and Evaluation |
45 |
- |
| 735 |
2016 |
H. Sarangi, K.S.R.K. Murthy and D. Chakraborty |
Accurate Measurement of Mixed Mode (I/II) |
Journal of Testing and Evaluation |
45 |
1-12 |
| 736 |
2016 |
V. Satheeshkumar, R. Ganesh Narayanan |
Experimental evaluation and prediction of formability of adhesive bonded steel sheets at different adhesive properties |
Journal of Testing and Evaluation |
44 |
1-13 |
| 737 |
2016 |
S. Sarma, N. Sahoo and A. Unal |
Calibration of silver thin film gauge for short duration step heat load |
Sadhna ? Indian Academy of Sciences |
41 |
787-794 |
| 738 |
2016 |
C. Shravan and R. Tiwari |
Detection of a Fatigue Crack in a Rotor System using Full-Spectrum Based Estimation |
Sadhana ? Indian Academy Proceedings in Engineering |
41 |
239-251 |
| 739 |
2016 |
S. Peter and A. K. De |
A parallel implementation of the ghost-cell immersed boundary method with application to stationary and moving boundary problems |
Sadhana, Indian Academy of Science |
41 |
441-450 |
| 740 |
2016 |
Harshad gaikwad, D.N. Basu, Pranab K. Mondal |
Electroosmotic transport of immiscible binary system with a layer of non-conducting fluid under interfacial slip: The role applied pressure gradient |
Electrophoresis |
37 |
1998-2009 |
| 741 |
2016 |
S. Samanta, D.N. Basu |
Energy and Entropy-based Optimization of a Single-stage Water-Lithium Bromide Absorption Refrigeration System |
Heat Transfer Engineering |
37 |
232-241 |
| 742 |
2016 |
Kant R. and Joshi S.N. |
Numerical and Experimental Studies on the Laser Bending of Magnesium M1A Alloy. |
Lasers in Engineering (Old City Publishing) |
35 |
39-62 |
| 743 |
2016 |
H Chaudhary, SD Kore |
Electromagnetic forming analysis of AA5182 at elevated temperatures |
International Journal of Microstructure and Materials Properties |
11 |
105-118 |
| 744 |
2016 |
Sharad R. Valvi, Arun Krishnan, Sumitesh Das, R. Ganesh Narayanan |
Prediction of microstructural features and forming of Friction Stir Welded sheets using Cellular Automata Finite Element (CAFE) approach |
International Journal of Material Forming |
9 |
115-129 |
| 745 |
2016 |
M.D. Ghatak, P. Mahanta |
Biogas purification using chemical absorption |
International Journal of Engineering and Technology |
8 |
1600-1605 |
| 746 |
2016 |
B. Das, S. Pal and S. Bag |
Defect detection in friction stir welding process through characterization of signals by fractal dimension |
Manufacturing Letters |
7 |
6-10 |
| 747 |
2016 |
R. Kalidasan, J. Vaibhav, S. Senthilvelan and U. S. Dixit |
Double tool turning: machining accuracy, cutting tool wear and chip-morphology |
International Journal of Precision Technology |
6 |
142-158 |
| 748 |
2016 |
Sachin Singh, M. Ravi Sankar, V. K. Jain, J. Ramkumar |
Modeling of Nano Finishing Forces and Surface Roughness in Abrasive Flow Finishing (AFF) Process using Rheological Properties |
International Journal of Precision Technology |
6 |
123-141 |
| 749 |
2016 |
Alisha Prasad, Kuldeep Mahato, Pranjal Chandra, Ananya Srivastava, Shrikrishna N. Joshi, and Pawan Kumar Maurya |
Bioinspired Composite Materials: Applications in Diagnostics and Therapeutics |
Journal of Molecular and Engineering Materials |
4 |
- |
| 750 |
2016 |
D. Chakraborty, D. Chakraborty and K. S. R. K. Murthy |
Optimal strain gage location for determination of mode I stress intensity factor for orthotropic laminates using a single strain gage |
Challenge Journal of Structural Mechanics |
2 |
179-184 |
| 751 |
2015 |
V.Yadav,A.K.Singh and U.S.Dixit |
Inverse estimation of thermal parameters and friction coefficient during warm flat rolling process. |
Internation Journal of Mechanical Sciences |
96-97 |
- |
| 752 |
2015 |
PS Rama Sreekanth, S Kanagaraj |
Influence of multi walled carbon nanotubes reinforcement and gamma irradiation on the wear behaviour of UHMWPE |
Wear |
334-335 |
-90 |
| 753 |
2015 |
Sachin Singh, , M. Ravi Sankar |
Design and Performance Evaluationof Abrasive Flow Finishing Process during Finishing of Stainless Steel Tube Process during Finishing of Stainless Steel Tubes |
Materials Today:Procedia |
|
3161-3169 |
| 754 |
2015 |
A. Muthuraja and S. Senthilvelan |
Adhesive wear performance of tungsten carbide based self-lubricant cutting tool material |
International Journal of Refractory Metals and Hard Materials |
52 |
235-244 |
| 755 |
2015 |
S Kirtania and D Chakraborty |
Failure analysis of carbon nanotube/epoxy composites having a broken carbon nanotube |
Journal of Reinforced Plastics and Composites |
34 |
1639-1647 |
| 756 |
2015 |
Biswajit Parida, Shiv Dayal Vishwakarma and Sukhomay Pal |
Design and Development of Fixture and Force Measuring System for Friction Stir Welding Process Using Strain Gauges |
Journal of Mechanical Science and Technology |
29 |
739-749 |
| 757 |
2015 |
B. Nayak, S. K. Dwivedy, K.S.R.K. Murthy |
Fabrication and characterization of magnetorheological elastomer with carbon black |
Journal of Intelligent Material Systems and Structures |
26 |
830-839 |
| 758 |
2015 |
Kumar A. M. S, Panda, S. and Chakraborty, D. |
Harmonically exited nonlinear vibration of heated functionally graded plates integrated with piezoelectric composite actuator |
Journal of Intelligent Material Systems and Structures |
26 |
931-951 |
| 759 |
2015 |
Arun Kadian & Biswas Pankaj |
A Comparative Study of Material Flow Behavior in Friction Stir Welding using Laminar and Turbulent Models, Journal of Materials Engineering and Performance |
Journal of Materials Engineering and Performance |
24 |
4119-4127 |
| 760 |
2015 |
Biswajit Parida and Sukhomay Pal |
A fuzzy assisted grey Taguchi approach for the optimization of multiple weld quality properties in friction stir welding process |
Science and Technology of Welding and Joining |
20 |
35-41 |
| 761 |
2015 |
Barkachary B. M. and Joshi S. N. |
Integrated finite element method (FEM) and response surface methodology (RSM) based modeling and simulation of single point diamond turning (SPDT) of silicon |
International Journal of Machining and Machinability of Materials |
17 |
330-354 |
| 762 |
2015 |
Hakeem Niyas, Likhendra Prasad, Muthukumar P |
Performance Investigation of High-Temperature Sensible Heat Thermal Energy Storage System during Charging and Discharging Processes. |
Clean Technologies and Environmental Policy, |
17 |
501-513 |
| 763 |
2015 |
Jagu S. Rao and R. Tiwari |
A Pareto Optimal Design Analysis of Magnetic Thrust Bearings using Multi Objective Genetic Algorithms |
International Journal for Computational Methods in Engineering Science and Mechanics |
16 |
71-85 |
| 764 |
2015 |
V. Waghole and R. Tiwari |
Optimization of Spherical Roller Bearing Design using Artificial Bee Colony Algorithm and Grid Search Method |
International Journal for Computational Methods in Engineering Science and Mechanics(DOI: 10.1080/15502287.2015.1045998) |
16 |
221-233 |
| 765 |
2015 |
Pandey, V.,?Dalal, A., Biswas, G., |
Bubble Formation in Film Boiling Including Electrohydrodynamic Forces |
Procedia IUTAM |
15 |
86-91 |
| 766 |
2015 |
V. Satheeshkumar, R. Ganesh Narayanan |
Prediction of formability of adhesive bonded steel sheets and experimental validation |
Archives of Civil and Mechanical Engineering |
15 |
31-40 |
| 767 |
2015 |
A. K. Mondal, P. Biswas, S. Bag |
Influence of tacking sequence on residual stress and distortion of single sided fillet submerged arc welded joint |
Journal of Marine Science and Application |
14 |
250-260 |
| 768 |
2015 |
Satya Sekhar B, Muthukumar P |
Performance Investigation of a Single-stage Metal Hydride Heat Transformer. |
Int. J Green Energy |
13 |
102-109 |
| 769 |
2015 |
B. Das, S. Bag and S. Pal |
Defect detection in friction stir welding process through characterization of signals by fractal dimension |
Manufacturing Letters |
7 |
6-10 |
| 770 |
2015 |
Arbind Prasad, B. Devendar, M. Ravi Sankar, P.S. Robi |
Micro-Scratch Based Tribological Characterization of Hydroxyapatite (HAp) Fabricated through Fish Scales |
Materials Today:Procedia |
|
1216-1224 |
| 771 |
2015 |
Rasmi Ranjan Behera, M. Ravi Sankar |
State of the Art on Under Liquid Laser Beam Machining |
Materials Today: Procedia |
|
1731-1740 |
| 772 |
2015 |
B. Ray, G. Biswas and A. Sharma |
Regimes during liquid drop impact on a liquid pool |
Journal of Fluid Mechanics |
768 |
492-523 |
| 773 |
2015 |
AmitavaGhatak and P.S.Robi |
A comparative study of constitutive equations for the creep deformation of HP40Nb micro-alloyed steel |
Materials Sci. &Engg.-A |
648 |
418-427 |
| 774 |
2015 |
Lototskyy MV, Sekhar BS, Muthukumar P, Pollet BG, Linkov V |
Niche applications of metal hydrides and related thermal management issues. |
J. Alloys and Compounds |
645 |
117-122 |
| 775 |
2015 |
L. Roy and S . K. Kakoty |
Application of Genetic Algorithm in Optimization of Hydrodynamic Bearings |
Advances in Intelligent Systems and Computing |
335 |
207-217 |
| 776 |
2015 |
M.K.S. Sarkar, D.N. Basu |
Working Regime Identification for Natural Circulation Loops by Comparative Thermalhydraulic Analyses with Three Fluids under Identical Operating Conditions |
Nuclear Engineering and Design |
293 |
187-195 |
| 777 |
2015 |
A.K. Tilak, D.N. Basu |
Computational Investigation of the Dynamic Response of a Supercritical Natural Circulation Loop to Aperiodic and Periodic Excitations |
Nuclear Engineering and Design |
284 |
251-263 |
| 778 |
2015 |
Ganesh Natarajan |
Bio-allometry inspired resource estimation in Twenty20 cricket |
Proceedings of IMechE, Part P: Journal of Sports Engineering and Technology |
229 |
266-277 |
| 779 |
2015 |
Lintu Roy and S.K. Kakoty |
Groove location for optimum performance of three- and four-lobe bearings using genetic algorithm |
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology January 2015 |
229 |
47-63 |
| 780 |
2015 |
Deepak Kumar Yaduwanshi, Swarup Bag and Sukhomay Pal |
Heat transfer analyses in friction stir welding of aluminum alloy |
I Mech. E Part B: Journal of Engineering Manufacture |
229 |
1722-1733 |
| 781 |
2015 |
Kant R. and Joshi S. N. |
Numerical Modeling and Experimental Validation of Curvilinear Laser Bending of Magnesium Alloy Sheets |
Proceedings of The Institute of Mechanical Engineering Part B: Journal Of Engineering Manufacture |
228 |
1036-1047 |
| 782 |
2015 |
Kumar A S P., Panda S and Reddy N. H |
Smart damping of vibration of annular plates through the design of a cylindrically orthotropic piezoelectric fiber-reinforced composite actuator |
Acta Mechanica |
226 |
3151-3176 |
| 783 |
2015 |
A. Hens, G. Biswas and S. De |
Evaporation of water droplets on Pt-surface in presence of external electric field ? A molecular dynamics study |
The Journal of Chemical Physics |
143 |
094702-1-094702-1 1 |
| 784 |
2015 |
Sekhar BS, Muthukumar P |
Development of Double-Stage Metal Hydride based Hydrogen Compressor for Heat Transformer Application, |
Journal of Energy Engineering |
141 |
04014049-1-04014049-6 |
| 785 |
2015 |
D.N. Basu, A. Ganguly |
Conceptual Design and Performance Analysis of a Solar Thermal-Photovoltaic-Powered Absorption Refrigeration System |
Journal of Solar Energy Engineering |
137 |
031020-1-031020-9 |
| 786 |
2015 |
Varma, N., Dulhani, J. P., Dalal, A., Sarkar, S., and Ganguly, S. |
Effect of Channel Confinement on Mixed Convective Flow Past an Equilateral Triangular Cylinder |
ASME Journal of Heat Transfer |
137 |
121013- |
| 787 |
2015 |
S.M.kamal and U.S.Dixit |
Flexibility study of thermal autofrettage of thick-walled cylinders. |
ASME Journal of Pressure Vessel Technology |
137 |
- |
| 788 |
2015 |
B J Bora and U K Saha |
Improving the performance of a biogas powered dual fuel diesel engine using emulsified rice bran biodiesel as pilot fuel through adjustment of compression ratio and injection timing |
ASME Journal of Engineering for Gas Turbines and Power |
137 |
1-14 |
| 789 |
2015 |
R. Tiwari and R. C. M. Chandran |
Multitude of Objectives Based Optimum Designs of Cylindrical Roller Bearings Using Evolutionary Algorithms |
ASME Journal of Tribology |
137 |
1-12 |
| 790 |
2015 |
S Roy and U K Saha |
Wind tunnel experiments of a newly developed two-bladed Savonius-style wind turbine. |
Applied Energy |
137 |
117-125 |
| 791 |
2015 |
D. Chatterjee and G. Biswas |
Dynamic behavior of flow around rows of square cylinders kept in staggered arrangement |
Journal of Wind Engineering and Industrial Aerodynamics |
136 |
1-11 |
| 792 |
2015 |
R. Singh, A. Sasmal and S.C. Mishra |
Nanoparticle mediated transmittance signals from pulsed laser irradiated cancerous lung as a function of respiration |
Optik - International Journal for Light and Electron Optics |
126 |
5605-5609 |
| 793 |
2015 |
MSA Kumar, S Panda and D Chakraborty |
Design and analysis of a smart graded fiber-reinforced composite laminated plate |
Composite Structures |
124 |
176-195 |
| 794 |
2015 |
L. Hauchhum, P. Mahanta, J.De Wilde |
Capture of CO2 from Flue Gas onto Coconut Fibre-Based Activated Carbon and Zeolites in a Fixed Bed |
Transport in Porous Media |
110 |
503-519 |
| 795 |
2015 |
G. Natarajan, N. Sahoo, V. Kulkarni |
Optimal fore-body shape for minimum drag in supersonic flow |
Journal of the Institution of Engineers (India): Series C |
96 |
5-11 |
| 796 |
2015 |
R. Tiwari and V. Talatam |
Estimation of Speed-Dependent Bearing Dynamic Parameters in Rigid Rotor Systems Levitated by Electromagnetic Bearings |
Mechanism and Machine Theory |
92 |
100-112 |
| 797 |
2015 |
P. Randive, A. Dalal, K.C. Sahu, G. Biswas, P. Mukherjee |
Wettability effects on contact line dynamics of droplet motion in an inclined channel |
Physical Review E |
91 |
1-16 |
| 798 |
2015 |
R. Singh, K. Das, J. Okajima, S. Maruyama and? S.C. Mishra |
Modelling skin cooling using optical windows and cryogens during laser induced hyperthermia in a multilayer vascularized tissue, |
Applied Thermal Engineering |
89 |
28-35 |
| 799 |
2015 |
N. K. Mishra, S.C. Mishra and P. Muthukumar |
Performance characterization of a medium-scale liquefied petroleum gas cooking stove with a two-layer porous radiant burner |
Applied Thermal Engineering |
89 |
44-50 |
| 800 |
2015 |
Panda S, Reddy N. H. and Kumar A. S. P. |
Design and finite element analysis of a short piezoelectric fiber-reinforced composite actuator |
Archive of Applied Mechanics |
85 |
691-711 |
| 801 |
2015 |
B J Bora and U K Saha |
Comparative assessment of a biogas run dual fuel diesel engine with rice bran oil methyl ester, pongamia oil methyl ester and palm oil methyl ester as pilot fuels |
Renewable Energy |
81 |
490-498 |
| 802 |
2015 |
Kumar, A. M. S., Panda, S., Kumar S. and Chakraborty, D. |
A design of laminated composite plates using graded orthotropic fiber-reinforced composite plies |
Composites Part B: Engineering |
79 |
476-493 |
| 803 |
2015 |
Bhardwaj, S., and Dalal, A., and Pati |
Influence of Wavy Wall and Non-uniform Heating on Natural Convection Heat Transfer and Entropy Generation Inside Porous Complex Enclosure |
Energy |
79 |
467-481 |
| 804 |
2015 |
Manas Das, V.K. Jain, P.S Ghoshdastidar |
A 2D CFD simulation of MR polishing medium in magnetic field-assisted finishing process using electromagnet |
International Journal of Advanced Manufacturing Technology |
76 |
173-187 |
| 805 |
2015 |
V. Satheeshkumar, R. Ganesh Narayanan |
In-plane plane-strain formability of adhesive bonded steel sheets: Influence of adhesive properties |
International Journal Advanced Manufacturing Technology |
76 |
993-1009 |
| 806 |
2015 |
S.C. Mishra and R. K. Chourasia ? |
Analysis of dual-phase-lag non-Fourier conduction and radiation heat transfer in a planar slab |
Numerical Heat Transfer, Part A, |
68 |
1010-1022 |
| 807 |
2015 |
S. Biswas, P. Sharma, B. Mondal and G. Biswas |
Analysis of Mixed Convective Heat Transfer in a Ribbed Channel using The Lattice Boltzmann Method |
Numerical Heat Transfer Part A |
68 |
75-98 |
| 808 |
2015 |
V.K. Mishra, S.C. Mishra, D.N. Basu |
Combined Mode Conduction and Radiation Heat Transfer in a Porous Medium and Estimation of Optical Properties of the Porous Matrix |
Numerical Heat Transfer Part A |
67 |
1119-1135 |
| 809 |
2015 |
Bhardwaj, S., and Dalal, A. |
Effect of Undulations on the Natural Convection Heat Transfer and Entropy Generation Inside Porous Right-angled Triangular Enclosure |
Numerical Heat Transfer:?Part A |
67 |
972-991 |
| 810 |
2015 |
Dulhani, J. P., and Dalal, A. |
Flow past an equilateral triangular bluff obstacle: computational study of the effect of thermal Buoyancy on flow physics and heat transfer |
?Numerical Heat Transfer:Part A |
67 |
476-495 |
| 811 |
2015 |
Satya Sekhar B, Muthukumar P |
Thermal modelling of a double-stage metal hydride based heat transformer. |
Numerical Heat Transfer Part A |
67 |
883-901 |
| 812 |
2015 |
I. Chakraborty, G. Biswas, S. Polepalle and P.S. Ghoshdastidar |
Bubble Formation and Dynamics in a Quiescent High-Density Liquid |
AIChE Journal |
61 |
3996-4012 |
| 813 |
2015 |
V. Satheeshkumar, R. Ganesh Narayanan |
Forming performance of adhesive bonded steel sheets reinforced with metallic wires |
Welding in the World: The International Journal of Materials Joining |
59 |
883-900 |
| 814 |
2015 |
Randive, P., and Dalal, A. |
Influence of Geometry on Mobilization of Trapped Blob |
European Journal of Mechanics - B/Fluids |
53 |
1-10 |
| 815 |
2015 |
K. Das and S.C. Mishra |
Simultaneous estimation of size, radial and angular locations of a malignant tumor in a 3-D human breast - A numerical approach |
Journal of Thermal Biology, |
52 |
147-156 |
| 816 |
2015 |
A. Muthuraja and S. Senthilvelan |
Abrasive wear performance of tungsten carbide based self-lubricant cutting tool material |
International Journal of Refractory Metals and Hard Materials |
51 |
91-101 |
| 817 |
2015 |
A. Bhowmik, R. Repaka, R. Mulaveesala and S.C. Mishra |
Suitability of frequency modulated thermal wave imaging for skin cancer detection - A theoretical prediction, |
Journal of Thermal Biology |
51 |
65-82 |
| 818 |
2015 |
A. Bhowmik, R. Repaka, S.C. Mishra and K. Mitra |
Thermal assessment of ablation limit of subsurface tumor during focused ultrasound and laser heating, |
ASME Journal of Thermal Science and Engineering Applications |
51 |
65-82 |
| 819 |
2015 |
Perumalla Janaki Ramulu, Satish V. Kailas, R. Ganesh Narayanan |
Formability of friction stir welded sheets made of AA 6061-T6 at different weld orientations and weld locations |
International Journal Materials and Product Technology |
50 |
147-160 |
| 820 |
2015 |
A. Muthuraja and S. Senthilvelan |
Development of tungsten carbide based self lubricant cutting tool material: Preliminary investigation |
International Journal of Refractory Metals and Hard Materials |
48 |
89-96 |
| 821 |
2015 |
V. Satheeshkumar, R. Ganesh Narayanan |
Experimental evaluation and prediction of deep drawability of adhesive bonded steel sheets |
Materialwissenschaft und Werkstofftechnik |
46 |
713-735 |
| 822 |
2015 |
B K Debnath, U K Saha and N Sahoo |
A comprehensive review on the application of emulsion as an alternative fuel for diesel engine. |
Renewable and Sustainable Energy Reviews |
42 |
196-211 |
| 823 |
2015 |
Dawit . G. Gunjo, P. K. Mahanta, P. S. Robi |
Impact of Ambient Conditions and Top Heat loss on Useful Energy of Flat Plate Solar Collectors |
International Journal of Emerging Trends in Electrical and Electronics |
11 |
209-213 |
| 824 |
2015 |
Panda, S. P, and Panda, S. |
Micromechanical finite element analysis of effective properties of a unidirectional short piezoelectric fiber reinforced composite |
International Journal of Mechanics and Materials in Design |
11 |
41-57 |
| 825 |
2015 |
Kumar D. A., Kadian Arun Kumar and Biswas Pankaj |
Numerical and experimental study on influence of tool plunging force and shoulder size on thermal history of Friction Stir Welding |
International Journal of Manufacturing Research (IJMR- Inderscience) |
10 |
64-86 |
| 826 |
2015 |
Dixit U. S., Joshi S. N. and Kant Ravi |
Laser forming systems: a review |
International Journal of Mechatronics and Manufacturing Systems |
8 |
160-205 |
| 827 |
2015 |
Sathisha H. M., and Dalal, A. |
Two-Dimensional Unsteady Simulation of All-Vanadium Redox Flow Battery |
ASME Journal of Thermal Science and Engineering Applications |
8 |
11019- |
| 828 |
2015 |
C Patel, S D Kore |
Effect of Frequency on electromagnetic expansion of thin tubes |
Journal of Machining and Forming Technologies |
7 |
- |
| 829 |
2015 |
AmitavaGhatak and P.S. Robi |
Creep Behaviour And Creep Life Assessment Of Hp40nb Reformer Steel |
Int. J. of Res. inEngg. and Appl. Sci |
5 |
98-105 |
| 830 |
2015 |
Natesan S., Kalita K. and Venkatesu S., |
Numerical and Experimental Investigation of Bridge Currents of an Induction Machine Equipped with Bridge Configured Winding |
International Journal of Electrical and Computer Engineering |
5 |
1262-1274 |
| 831 |
2015 |
PhyuPhyu Thant, P.S.Robi and P. Mahanta |
Effect of Incline in an Inclined Bubbling Fluidized Bed Paddy Dryer |
International Journal of Scientific Engineering and Technology Research |
4 |
1190-1196 |
| 832 |
2015 |
Dawit.G.Gunjo,P.K.Mahanta,P.S.Robi |
Effect of pitch on heat transfer characteristic of helical coils to be used for biogas production |
Int. Journal of Res. Engg., and Technology |
4 |
355-362 |
| 833 |
2015 |
PhyuPhyu Thant, P. Mahanta and P.S. Robi |
Effect of Spirals in an Inclined Bubbling Fluidized Bed Paddy Dryer |
International Journal of Engineering Research and Technology |
4 |
270-277 |
| 834 |
2015 |
AmitavaGhatak and P.S.Robi |
High-temperature Deformation Behavior of HP40Nb, Micro-alloyed Reformer Steel |
Metallography. Microstructure and Analysis |
4 |
508-517 |
| 835 |
2015 |
B. Bharat, B. S. Kiran, D. Bandopadhya |
Design and Development of a Mobile Robot for Material Handling, |
Journal of Advancement in Robotics |
3 |
1-14 |
| 836 |
2015 |
Prakash Kumar Sahu and Sukhomay Pal |
Multi-Response Optimization of Process Parameters in Friction Stir Welded AM20 Magnesium Alloy by Taguchi Grey Relational Analysis |
Journal of Magnesium and Alloys |
3 |
36-46 |
| 837 |
2015 |
PhyuPhyu Thant, P. Mahanta and P.S. Robi |
Performance Enhancement of Inclined Fluidized Bed Paddy Dryer by Design Modification |
International Journal of Engineering and Applied Sciences |
2 |
61-65 |
| 838 |
2015 |
Kant R., Joshi S. N. and Dixit U. S. |
An Integrated FEM-ANN Model for Laser Bending Process with Inverse Estimation of Absorptivity |
Journal of Mechanics of Advanced Materials and Modern Processes |
1 |
1-12 |
| 839 |
2014 |
Patel.C.,Kore, S.D. |
Dual electromagnetic forming using single uniform pressure Coil |
Key Engineering Materials |
611-612 |
- |
| 840 |
2014 |
Doley. J.K.,Kore, S.D. |
Electromagnetic formability of an aluminium ice tray |
Key Engineering Materials |
611-612 |
1124-1131 |
| 841 |
2014 |
Mukesh Kumar, Satish V. Kailas, R. Ganesh Narayanan |
In-Plane Plane-Strain formability investigation of friction stir welded sheets made of dissimilar Aluminium alloys |
Applied Mechanics and Materials |
446-447 |
301-305 |
| 842 |
2014 |
S. Arun, P S Rama Sreekanth, S. Kanagaraj |
Mechanical characterization of PMMA/SWNTs bone cement using Nanoindenter |
Advanced Biomaterials |
29(B1) |
- |
| 843 |
2014 |
Debaleena Chakraborty, K.S.R.K. Murthy and D. Chakraborty |
A new single strain gage technique for the accurate determination of mode I stress intensity factor in orthotropic composite materials |
Engineering Fracture Mechanics |
124-125 |
142-154 |
| 844 |
2014 |
Jagannath Sardar, Dibakar Bandopadhya |
Development and Fabrication of Cement Reinforced Polypropylene Composite Material Spur Gear, Journal of Polymer Engineering, |
Journal of Polymer Engineering |
34 |
775-786 |
| 845 |
2014 |
S Kirtania and D Chakraborty |
Analysis of carbon nanotube-reinforced alumina matrix nanocomposites with a broken fiber |
Journal of Reinforced Plastics and Composites |
33 |
389-398 |
| 846 |
2014 |
Chanda, A., Fischer, A., Eberhard, P., Dwivedy, S.K. |
Stability analysis of a thin-walled cylinder in turning operation using the semi-discretization method |
Acta Mechanica Sinica |
30 |
214-222 |
| 847 |
2014 |
Mandal N. R, Sharat Kumar and Biswas Pankaj |
Distortion Measurement of Ship Blocks using Photogrammetry |
Journal of Ship Production and Design |
29 |
1-8 |
| 848 |
2014 |
A. Hens, G. Biswas and S. De |
Analysis of interfacial instability and multimode bubble formation in saturated pool boiling using Coupled Level Set and Volume- of- Fluid approach |
Physics of Fluids |
26 |
012105-1-12105-14 |
| 849 |
2014 |
A. Chaugale and R. Tiwari |
Identification of Bearing Dynamic Parameters and Unbalance States in a Flexible Rotor System Fully Levitated on Active Magnetic Bearings |
Mechatronics |
24 |
274-286 |
| 850 |
2014 |
Deepak Kumar Yaduwanshi, Swarup Bag and Sukhomay Pal |
Effect of preheating in hybrid friction stir welding of aluminum alloy |
Journal of Materials Engineering and Performance |
23 |
3794-3803 |
| 851 |
2014 |
Biswal, D.K., Bandopadhya, D., Dwivedy, S.K. |
Dynamic modeling and effect of dehydration on segmented IPMC actuators following variable parameter pseudo-rigid body modeling technique |
Mechanics of Advanced Materials and Structures |
21 |
129-138 |
| 852 |
2014 |
A. Ghosh, P. Goswami, P.Mahanta, A. Verma, |
Effect of carbon fiber length and graphene on carbon-polymer composite bipolar plate for PEMFC |
Journal of Solid State Electrochemistry |
18 |
3427-3436 |
| 853 |
2014 |
Randive,P., Dalal, A., Mukherjee, P.P. |
Mesoscopic simulation of blob resonance in a model porous pathway |
Microfluidics and Nanofluidics |
18 |
215-232 |
| 854 |
2014 |
Randive, P.,?Dalal, A., and Mukherjee, P. P. |
Probing the Influence of Superhydrophobicity and Mixed Wettability on Droplet Displacement Behavior |
Microfluidics and Nanofluidics |
17 |
657-674 |
| 855 |
2014 |
R. Tiwari and D. J. Bordoloi |
Unification of Multi-class Fault Classification from Diverse Domain Features of Gear Using SVM Algorithms |
International Journal of Condition Monitoring & Diagnostic Engineering |
17 |
39-49 |
| 856 |
2014 |
N. Shanmugapriya, Chandramohan Somayaji, S. Kanagaraj |
Characterization and optimization of Ce0.6Zr0.4-xMnxO2 (x?0.4) |
Journal of Nanoparticle Research |
16 |
1-10 |
| 857 |
2014 |
R. S. Desai and S. Bag |
Influence of displacement constraints in thermomechanical analysis of laser micro-spot welding process |
Journal of Manufacturing Processes |
16 |
264-275 |
| 858 |
2014 |
N. Shanmugapriya, C. Somayaji, S. Kanagaraj |
Optimization of Ce0.6Zr0.4-xAl1.3xO2 solid solution based on oxygen storage capacity |
Journal of Nanoparticle Research |
16 |
1-10 |
| 859 |
2014 |
R.K. Arun, K. Chaudhury, M. Ghosh, G. Biswas, N. Chanda and S. Chakraborty |
Controlled splitting and focusing of a stream of nanoparticles in a converging-diverging microchannel |
Lab on a Chip |
14 |
3800-3808 |
| 860 |
2014 |
Ramesh, P., Bommana, D., Kulkarni, V., Sahoo, N., Dwivedy, S.K. |
Experimental assessment of noncontact type laser-based force measurement technique for impulsive loading |
International Journal of Structural Stability and Dynamics |
14 |
- |
| 861 |
2014 |
P. Gangsar and R. Tiwari |
Multi-Class Fault Taxonomy in Rolling Bearings at Interpolated and Extrapolated Speeds Based on Time Domain Vibration Data by SVM Algorithm |
Journal of Failure Analysis and Prevention |
14 |
826-837 |
| 862 |
2014 |
Bibin John, Sarath G, Vinayak Kulkarni and Ganesh Natarajan |
Performance Comparison of Flux Schemes for Numerical Simulation of High-Speed Inviscid Flows |
Progress in Computational Fluid Dynamics |
14 |
83-96 |
| 863 |
2014 |
Kalidasan, R., Ramanuj, V., Sarma, D.K., Senthilvelan, S. |
Influence of cutting speed and offset distance over cutting tool vibration in multi-tool turning process |
Advanced Materials Research |
984 |
100-105 |
| 864 |
2014 |
V. Satheeshkumar, R. Ganesh Narayanan |
Influence of pre-generated infinite adhesive defects on the forming behaviour of adhesive bonded steel sheets |
Advanced Materials Research |
939 |
328-335 |
| 865 |
2014 |
D. Doley, V. Satheeshkumar, R. Ganesh Narayanan |
Influence of wire reinforcement on the forming behaviour of adhesive bonded steel sheets |
Advanced Materials Research |
939 |
336-341 |
| 866 |
2014 |
Mertens, A.J., Senthilvelan, S. |
Abrasive wear performance of CNT/PP composites |
Applied Mechanics and Materials |
592 |
1262-1266 |
| 867 |
2014 |
G.N. Shelke,P. Mahanta |
Biomass briquette characterization for downdraft gasification |
Applied Mechanics and Materials |
592 |
2442-2446 |
| 868 |
2014 |
L. Hauchhum, P. Mahanta |
CO2 capture onto zeolite 13X and zeolite 4A by pressure swing adsorption in a fixed bed |
Applied Mechanics and Materials |
592 |
1456-1460 |
| 869 |
2014 |
Muthuraja, A., Senthilvelan, S |
Compaction characteristics of tungsten carbide based self lubricant cutting tool material |
Applied Mechanics and Materials |
592 |
87-91 |
| 870 |
2014 |
Kalidasan, R., Yatin, M., Sarma, D.K., Senthilvelan, S. |
Effect of offset distance on cutting forces and heat generation in multi-tool turning process |
Applied Mechanics and Materials |
592 |
211-215 |
| 871 |
2014 |
P Manivel, S Kanagaraj, A Balamurugan, N Ponpandian, D Mangalaraj, C Viswanathan |
Rheological behavior and electrical properties of polypyrrole/thermally reduced graphene oxide nanocomposite |
Colloids and Surfaces A: Physicochemical and Engineering Aspects |
441 |
622- |
| 872 |
2014 |
D.N. Basu, S. Bhattacharyya, P.K. Das |
A Review of Modern Advances in Analyses and Applications of Single-phase Natural Circulation Loop |
Nuclear Engineering and Design |
280 |
326-348 |
| 873 |
2014 |
M. Basumatary, G. Natarajan and S.C. Mishra |
Defect correction based velocity reconstruction for physically consistent simulations of non-Newtonian flows on unstructured grids |
Journal of? Computational Physics |
272 |
227-244 |
| 874 |
2014 |
S Malik and S K Kakoty |
Analysis of Dimple Textured Parallel and Inclined Slider |
Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology |
228 |
1343-1357 |
| 875 |
2014 |
V.K. Jain, U.S. Dixit, Christ Paul and Arvind Kumar |
Micromanufacturing: A review |
Proc. IMechE, Part B:, Journal of Engineering Manufacture |
228 |
995-1014 |
| 876 |
2014 |
S. Singh, N. Yadaiah, S. Bag and S. Pal |
Numerical simulation of welding induced residual stress in fusion welding process using adaptive volumetric heat source |
I Mech. E, Part C: Journal of Mechanical Engineering Science |
228 |
2960-2972 |
| 877 |
2014 |
R. Ganesh Narayanan, Sumitesh Das |
Sustainable and Green Manufacturing and Materials Design through Computations |
Proc. of the IMecheE, Part C: Journal of Mechanical Engineering Science |
228 |
1581-1605 |
| 878 |
2014 |
B K Debnath, U K Saha and N Sahoo |
An experimental way of assessing the application potential of emulsified palm biodiesel towards alternative to diesel. |
ASME Journal of Engineering for Gas Turbines and Power |
136 |
021401-1-021401-12 |
| 879 |
2014 |
Sarkar, S., Ganguly, S., and Dalal, A. |
Analysis of Entropy Generation during Mixed Convective Heat Transfer of Nanofluids past a Rotating Circular Cylinder |
ASME Journal of Heat Transfer |
136 |
1-10 |
| 880 |
2014 |
Sajan Kapil, Peter Eberhard and Santosha K. Dwivedy |
Nonlinear Dynamic Analysis of a Parametrically Excited Cold Rolling Mill |
ASME, Journal of Manufacturing Science and Engineering |
136 |
041012-1-041012-10 |
| 881 |
2014 |
P Manivel, S Kanagaraj, A Balamurugan, N Ponpandian, D Mangalaraj, C Viswanathan |
Rheological behavior and electrical, thermal properties of polypyrrole/graphene oxide nanocomposites |
Journal of Applied Polymer Science |
131 |
- |
| 882 |
2014 |
Jitendra Kumar Patel and Ganesh Natarajan |
A generic framework for design of interface capturing schemes for multi-fluid flows |
Computers and Fluids |
106 |
108-118 |
| 883 |
2014 |
Randive, P., and?Dalal, A. |
Influence of viscosity ratio and wettability on droplet displacement behavior: A mesoscale analysis |
Computers and Fluids |
102 |
15-31 |
| 884 |
2014 |
Deepak Sharma, Kalyanmoy Deb |
Generation of Compliant Mechanisms using Hybrid Genetic Algorithm |
Journal of The Institution of Engineers (India): Series C |
95 |
295-307 |
| 885 |
2014 |
Nayan Jyoti Baishya, Deepak Sharma, Uday S. Dixit |
Optimization of Pressure Vessel Under Thermo-Elastic Condition |
Journal of The Institution of Engineers (India): Series C |
95 |
389-400 |
| 886 |
2014 |
S. Mahto and U.S. Dixit |
Shape optimization of revolute-jointed rigid-flexible manipulator |
Journal of Institution of Engineers (India), Series C |
95 |
335-346 |
| 887 |
2014 |
B J Bora, U K Saha, S Chatterjee and V Veer |
Effect of compression ratio on performance, combustion and emission characteristics of a dual fuel diesel engine run on raw biogas. |
Energy Conversion and Management |
87 |
1000-1009 |
| 888 |
2014 |
S Roy and U K Saha |
An adapted blockage factor correlation approach in wind tunnel experiments of a Savonius-style wind turbine. |
Energy Conversion and Management |
86 |
418-427 |
| 889 |
2014 |
N. Yadaiah and S. Bag |
Development of egg-configuration heat source model in numerical simulation of autogeneous fusion welding processes |
International Journal of Thermal Sciences |
86 |
125-138 |
| 890 |
2014 |
A. Sasmal and S.C. Mishra |
Analysis of non-Fourier conduction and radiation in a differentially heated 2-D square cavity, |
International Journal of Heat and Mass Transfer |
79 |
116-125 |
| 891 |
2014 |
Anand Mohan S Senthilvelan |
Preliminary Bending Fatigue Performance Evaluation of Asymmetric Composite Gear |
Mechanism and Machine Theory, |
78 |
98-104 |
| 892 |
2014 |
P.Kalita,P.Mahanta,U.K. Saha |
Study of bed-to-wall heat transfer with twisted tape at the upper splash region of a pressurized circulating fluidized bed unit |
International Journal of Heat and Mass Transfer |
78 |
260-266 |
| 893 |
2014 |
R.R. Vernekar and S.C. Mishra |
Analysis of transport of short-pulse radiation in a participating medium using lattice Boltzmann method |
International Journal of Heat and Mass Transfer |
77 |
218-229 |
| 894 |
2014 |
M. Chandrasekaran, M. Muralidhar and U.S. Dixit |
Online optimization of finish turning process: strategy and experimental validation |
International Journal of Advanced Manufacturing |
75 |
783-791 |
| 895 |
2014 |
P. Saha, G. Biswas and S. Sarkar |
Comparison of winglet-type vortex generators periodically deployed in a plate-fin heat exchanger |
International Journal of Heat and Mass Transfer |
74 |
292-305 |
| 896 |
2014 |
Dulhani, J. P., Sarkar, S., and?Dalal, A. |
Effect of Angle of Incidence on Mixed Convective Wake Dynamics and Heat Transfer Past a Square Cylinder in Cross Flow at Re = 100 |
International Journal of Heat and Mass Transfer |
74 |
319-332 |
| 897 |
2014 |
Randive, P.,?Dalal, A., and Mukherjee, P. P. |
Lattice Boltzmann Modeling of Two-phase Behavior Under Acoustic Excitation: Capillarity-wettability Interaction |
International Journal of Heat and Mass Transfer |
74 |
460-472 |
| 898 |
2014 |
M.K.S. Sarkar, A.K. Tilak, D.N. Basu |
A State-of-the-art Review of Recent Advances in Supercritical Natural Circulation Loops for Nuclear Applications |
Annals of Nuclear Energy |
73 |
250-263 |
| 899 |
2014 |
D. J. Bordoloi and R. Tiwari |
Optimum Multi-fault Classification of Gears with Integration of Evolutionary and SVM Algorithms |
Mechanism and Machine Theory |
73 |
49-60 |
| 900 |
2014 |
S. Sarkar, S. Ganguly and G. Biswas |
Buoyancy driven convection of nanofluids in an infinitely long channel under the effect of a magnetic field |
International Journal of Heat and Mass Transfer |
71 |
328-340 |
| 901 |
2014 |
A. Hens, R. Agarwal and G. Biswas |
Nanoscale study of boiling and evaporation in a liquid Ar film on a Pt heater using molecular dynamics simulation |
International Journal of Heat and Mass Transfer |
71 |
303-312 |
| 902 |
2014 |
A. Bhowmik, R. Repaka, S.C. Mishra and K. Mitra |
Analysis of radiative signals from normal and malignant human skins subjected to a short-pulse laser |
International Journal of Heat and Mass Transfer |
68 |
278-294 |
| 903 |
2014 |
S.C. Mishra and H. Sahai |
Analysis of non-Fourier conduction and volumetric radiation in a concentric spherical shell using the lattice Boltzmann method and the finite volume method |
International Journal of Heat and Mass Transfer |
68 |
51-66 |
| 904 |
2014 |
D. Raha, P. Mahanta, M.L. Clarke, |
The implementation of decentralised biogas plants in Assam, NE India: The impact and effectiveness of the National Biogas and Manure Management Programme |
Energy Policy |
68 |
81-91 |
| 905 |
2014 |
A. Bhowmik, R. Repaka, and S.C. Mishra |
Thermal analysis of increasing subcutaneous fat thickness within human skin - A numerical study |
Numerical Heat Transfer, Part A |
67 |
313-329 |
| 906 |
2014 |
S.C. Mishra , H. Poonia, A.K. Das, P. Asinari and R. Borchiellini |
Analysis of conduction-radiation heat transfer in 2-D enclosure using the lattice Boltzmann method |
Numerical Heat Transfer, Part A |
66 |
669-688 |
| 907 |
2014 |
S.C. Mishra, R. Singh, P. Agarwal and Ch. Hari Krishna |
Analysis of radiative transport in a 2-D cylindrical participating medium subjected to collimated radiation, |
Numerical Heat Transfer, Part A |
66 |
884-903 |
| 908 |
2014 |
S.C. Mishra, A. Akhtar and A. Garg |
Numerical analysis of Rayleigh-Benard convection with and without volumetric radiation |
Numerical Heat Transfer, Part A |
65 |
144-164 |
| 909 |
2014 |
K. Das and S.C. Mishra |
Non-invasive estimation of size and location of a tumor in a human breast using a curve fitting technique |
International Communications in? Heat and Mass Transfer |
56 |
63-70 |
| 910 |
2014 |
D. J. Bordoloi and R. Tiwari |
Support Vector Machine Based Optimization of Multi-Fault Classification of Gears with Evolutionary Algorithms from Time-Frequency Vibration Data |
Measurement |
55 |
1-14 |
| 911 |
2014 |
A. J. Chaudhari, N. Sahoo and V. Kulkarni |
Simulation models for spark ignition engine: A comparative performance study |
Energy Procedia |
54 |
330-341 |
| 912 |
2014 |
S. K. Singh, and R. Tiwari |
Detection and Localization of Multiple Cracks in a Shaft System: An Experimental investigation |
Measurement |
53 |
182-193 |
| 913 |
2014 |
A. Bhowmik, R. Repaka and S.C. Mishra |
Thermographic evaluation of early melanoma within the vascularized skin using combined non-Newtonian blood flow and bioheat models |
Computers in Biology and Medicine |
53 |
206-219 |
| 914 |
2014 |
S. Arun, S. Kanagaraj |
Mechanical characterization and validation of poly (methyl methacrylate)/multi walled carbon nanotube composite for the polycentric knee joint |
Journal of the Mechanical Behavior of Biomedical Materials |
50 |
33-42 |
| 915 |
2014 |
V. Satheeshkumar, R. Ganesh Narayanan |
Formability of adhesive bonded steel sheets with artificial finite adhesive defects |
Journal of Strain Analysis for Engineering Design |
49 |
286-300 |
| 916 |
2014 |
B. Nayak, S.K. Dwivedy and K.S.R.K. Murthy |
Dynamic stability of a rotating sandwich beam with magnetorheological elastomer core |
European Journal of Mechanics - A/Solids |
47 |
143-155 |
| 917 |
2014 |
K. Das and S.C. Mishra |
Study of thermal behavior of a biological tissue: An equivalence of Pennes bioheat equation and Wulff continuum model |
Journal of Thermal Biology |
45 |
103-109 |
| 918 |
2014 |
R. Singh, K. Das and S.C. Mishra |
Laser-induced hyperthermia of nanoshell mediated vascularized tissue - a numerical study |
?Journal of Thermal Biology |
44 |
55-62 |
| 919 |
2014 |
Perumalla Janaki Ramulu, R. Ganesh Narayanan |
Influence of shoulder diameter, plunge depth, welding speed, rotational speed on the tensile behavior of friction stir welded AA 6061-T6 sheets |
Journal of Testing and Evaluation |
42 |
1-13 |
| 920 |
2014 |
C. Loha, S. Gu, J. De Wilde, P. Mahanta, P.K. Chatterjee |
Advances in mathematical modeling of fluidized bed gasification |
Renewable and Sustainable Energy Reviews |
40 |
688-715 |
| 921 |
2014 |
A.K.De |
An implicit non-staggered Cartesian grid method for incompressible viscous flows in complex geometries |
Sadhana, Indian Academy of Science |
39 |
1071-1094 |
| 922 |
2014 |
S. Anbarasu, P. Muthukumar, and S.C. Mishra |
Tests on LmNi4.91Sn0.15 based Solid state hydrogen storage device with embedded cooling tubes - Part A: Absorption process |
International Journal of Hydrogen Energy |
39 |
3342-3351 |
| 923 |
2014 |
Anbarasu S, Muthukumar P, Mishra SC |
Tests on LmNi4.91Sn0.15 based Solid State Hydrogen Storage Device with Embedded Cooling Tubes ? Part B: Desorption Process |
Int. J. Hydrogen Energy |
39 |
4966-4972 |
| 924 |
2014 |
S. Anbarasu, P. Muthukumar and S.C. Mishra |
Thermal modeling of LmNi4.91Sn0.15 based Solid State Hydrogen Storage Device with Embedded Cooling Tubes |
International Journal of Hydrogen Energy |
39 |
15549-15562 |
| 925 |
2014 |
PS Rama Sreekanth, S Kanagaraj |
Influence of MWCNTs and gamma irradiation on thermal characteristics of medical grade UHMWPE |
Bulletin of Material Science |
37 |
347-356 |
| 926 |
2014 |
S.C. Mishra, H. Poonia, R. Vernekar, and A.K. Das |
Lattice Boltzmann method applied to the analysis of radiative transport problems with and without conduction in a 1-D planar medium |
Heat Transfer Engineering |
35 |
1267-1278 |
| 927 |
2014 |
D. Arumuga Perumal, Anoop K Dass |
Lattice Boltzmann simulation of two- and three-dimensional incompressible thermal flows |
Heat Transfer Engineering |
35 |
1320-1333 |
| 928 |
2014 |
R.P. Chopade, S.C. Mishra, P. Mahanta, S. Maruyama |
On configuration of load in radiant furnace for uniform thermal conditions |
Heat Transfer Engineering |
35 |
94-109 |
| 929 |
2014 |
Narang H. K., Mahapatra M. M., P. K. Jha and Biswas Pankaj |
Optimization and prediction of angular distortion and weldment characteristics of TIG square butt joints |
Journal of Materials Engineering and Performance |
35 |
1750-1758 |
| 930 |
2014 |
S. Anbarasu, P. Muthukumar, and S.C. Mishra |
Thermal modeling of Mg2Ni based solid state hydrogen storage reactor |
Heat Transfer Engineering |
35 |
1354-1362 |
| 931 |
2014 |
S. S. Gautam and R K Saxena |
A finite element study on effect of frictional heating in the taylor rod impact problem |
World Journal of Engineering |
11 |
529-542 |
| 932 |
2014 |
S Kirtania, D Chakraborty |
Fracture Behavior of Carbon Nanotube-Based Composites with a Broken Fiber Using Multi-Scale Finite Element Modeling |
Journal of Computational and Theoretical Nanoscience |
11 |
676-684 |
| 933 |
2014 |
Kadam , P. A., Panda, S. |
Nonlinear analysis of an imperfect radially graded annular plate with a heated edge |
International Journal of Mechanics and Materials in Design |
10 |
281-304 |
| 934 |
2014 |
T Mane, V Goel, SD Kore |
Finite Element Modelling of Electro-hydraulic Forming of Sheets |
Procedia Materials Science |
6 |
105-114 |
| 935 |
2014 |
L. Hauchhum, P. Mahanta |
Carbon dioxide adsorption on zeolites and activated carbon by pressure swing adsorption in a fixed bed |
International Journal of Energy and Environmental Engineering |
5 |
349-356 |
| 936 |
2014 |
Manas Das, V.K. Jain, P.S. Ghoshdastidar |
Estimation of magnetic and rheological properties of MR polishing fluid and their effects on magnetic field assisted finishing process |
Int. J. Precision Technology |
4 |
247-267 |
| 937 |
2014 |
Lenka Visweswara Rao and S K Kakoty |
Design of compact active magnetic bearing |
International Journal of Applied Sciences and Engineering Research |
3 |
741-754 |
| 938 |
2014 |
T S Reddy Ganji and S K Kakoty |
Dynamic Characteristics And Stability Of Cylindrical Textured Journal Bearing |
International Journal of Recent advances in Mechanical Engineering |
3 |
1-4 |
| 939 |
2014 |
Kishor Kumar Gajrani, Sumit Shekhar, M. Ravi Sankar |
Experimental comparative study of Conventional, Micro-Textured and Coated Micro-Textured Tools in Machining |
International Colloquium on Materials, Manufacturing and Metrology (ICMMM-2014) |
3 |
91-104 |
| 940 |
2014 |
T. Moasunep. Jamir, S. K. Kakoty, Karuna Kalita |
Gas Foil Bearing Analysis And The Effect Of Bump Foil Thickness On Its Performance Characteristics Using A Non-Linear Matrix Equation Solver |
International Journal of Recent advances in Mechanical Engineering |
3 |
15-30 |
| 941 |
2014 |
Dillip Kumar Biswal, Dibakar Bandopadhya |
An Intelligent Computer-Aided Assembly Process Planning Methodology for Mechanical Parts |
International Journal of Recent Trends in Mechanical Engineering, |
2 |
1-8 |
| 942 |
2014 |
Deepati Anil Kumar, Tikader Sujoy and Biswas Pankaj |
Experimental Investigation of Mechanical Properties on Friction Stir Welding of Dissimilar Aluminum Alloys |
International Journal of Current Engineering and Technology |
2 |
242-246 |
| 943 |
2014 |
S. Mahto and U.S. Dixit |
Parametric study of double link flexible manipulator |
Universal Journal of Mechanical Engineering |
2 |
211-219 |
| 944 |
2014 |
Dibakar Bandopadhya |
A method to solve and study the time delayed vibration characteristics of smart material actuator applying Lambert W-function, International Journal of Recent Trends in Mechanical Engineering, |
International Journal of Recent Trends in Mechanical Engineering, |
1 |
1-8 |
| 945 |
2014 |
R. Jain, V. Chouhan, D. Bandopadhya |
Design and Development of an Under-actuated Mechanism for Grasping and Grabbing of Objects, |
Journal of Mechatronics and Automation, |
1 |
- |
| 946 |
2014 |
K.Acharyya, Arun Chattopadhyaya and U.S. Dixit |
Determination of effective shear modulus of graphite/epoxy mixture by an inverse method |
Journal of Materials Forming and Machining Processes-IJMFMP |
1 |
1-13 |
| 947 |
2014 |
Dillip Kumar Biswal, Dibakar Bandopadhya*, and Santosha Kumar Dwivedy |
Development of an active catheter mechanism using IPMC for invivo inspection, |
Journal of Mechatronics and Automation |
1 |
1-10 |
| 948 |
2014 |
Jamir T. M., Kakoty S. K. and Kalita K., |
Gas Foil Bearings (GFBs) With Different Bump Foil Materials |
Trends in Machine Design |
1 |
1-11 |
| 949 |
2014 |
Jagannath Sardar, Dibakar Bandopadhya |
Investigation and Evaluation of Wear Characteristics of A Nonmetallic Spur Gear |
Trends in Machine design |
1 |
1-9 |
| 950 |
2014 |
Anbarasu S, Muthukumar P and Mishra SC |
Tests on LmNi5 Based Solid-State Hydrogen Storage Container. |
Int. J Science Research |
1 |
420-424 |
| 951 |
2014 |
Dillip Kumar Biswal, Dibakar Bandopadhya |
Theoretical and Experimental Investigation of Non-linear Vibration Response of an IPMC Actuator Subjected to Alternating Electric Potential |
Journal of Mechatronics and Automation |
1 |
11-26 |
| 952 |
2013 |
P S Rama Sreekanth, S Kanagaraj |
Assessment of bulk and surface properties of medical grade UHMWPE based nanocomposites using Nanoindentation and microtensile testing |
Journal of the Mechanical Behavior of Biomedical Materials |
18 |
140-151 |
| 953 |
2013 |
B. Ray, G. Biswas, A. Sharma, and S.W.J. Welch |
CLSVOF method to study consecutive drop impact on liquid pool |
International Journal of Numerical Methods for Heat & Fluid Flow |
23 |
141-158 |
| 954 |
2013 |
A. Trivedi, D. Srinivasan, D. Sharma, C. Singh |
Evolutionary Multi-objective Day-Ahead Thermal Generation Scheduling in Uncertain Environment |
Power Systems, IEEE |
28 |
1345-1354 |
| 955 |
2013 |
Girish O., Reddy N., Jammy S. and Kulkarni V. N |
Conjugate Heat Transfer Analysis for Hypersonic Flow Over Finite Thickness Flat Plate |
Journal of Aerospace Engineering |
26 |
708-714 |
| 956 |
2013 |
D. Biswal, D. Bandopadhaya and S.K. Dwivedy |
Investigation and evaluation of effect of dehydration on vibration characteristics of silver-electroded ionic polymer–metal composite actuator |
Journal of Intelligent Material Systems and Structures |
24 |
1197-1212 |
| 957 |
2013 |
S. Bag |
Recent advances in laser microwelding |
KIRAN: A Bulletin of Indian Laser Association |
24 |
23-31 |
| 958 |
2013 |
Roy S, and Saha UK |
Review on the Numerical Investigations into the Design and Development of Savonius Wind Rotors |
Renewable and Sustainable Energy Reviews |
24 |
73-83 |
| 959 |
2013 |
N. Yadaiah and S. Bag |
Role of oxygen as surface active element in linear GTA welding process |
Journal of Materials Engineering and Performance |
22 |
3199-3209 |
| 960 |
2013 |
P S Rama Sreekanth, N Ravindra Reddy, Mangala Lahkar, S Kanagaraj |
Biocompatibility studies on MWCNTs reinforced UHMWPE nanocomposites |
Trends in Biomaterials & Artificial Organs |
21 |
1-9 |
| 961 |
2013 |
P S Rama Sreekanth, S Kanagaraj |
Restricting the ageing degradation of the mechanical properties of gamma irradiated UHMWPE using MWCNTs |
Journal of the Mechanical Behavior of Biomedical Materials |
21 |
57-66 |
| 962 |
2013 |
U. Barman, A.K. Sen, and S. C. Mishra |
Theoretical and numerical investigations of an electroosmotic flow micropump with interdigitated electrodes |
Microsystem Technologies |
20 |
157-168 |
| 963 |
2013 |
R. Tiwari, D. J. Bordoloi, S. Bansal and S. Sahoo |
Application of Wavelet Analysis in Multi-class Fault Diagnosis of Gear using SVM |
International Journal of Condition Monitoring & Diagnostic Engineering |
16 |
17-24 |
| 964 |
2013 |
D. Sharma, A. Trivedi, D. Srinivasan, L. Thillainathan |
Multi-agent modeling for solving profit based unit commitment problem |
Applied soft computing |
13 |
3751-3761 |
| 965 |
2013 |
Eswaran M, Virk AS, and Saha UK |
Numerical Simulation of 2-D and 3-D Sloshing Waves in a Regularly and Randomly Excited Container |
Journal of Marine Science and Application |
12 |
298-314 |
| 966 |
2013 |
D. J. Bordoloi and R. Tiwari |
Optimization of Controller Parameters of Active Magnetic Bearings in Rotor-Bearing Systems. |
Advances in Vibration Engineering |
12 |
319-327 |
| 967 |
2013 |
Kirtania, S. and Chakraborty, D. |
Fracture behavior of carbon nanotube-based composites with a broken fiber using multi-scale finite element modeling |
Journal of Computational and Theoretical Nanoscience |
11 |
676-684 |
| 968 |
2013 |
S. Arun, S. Kanagaraj |
Effect of reinforcement and processing methods in PP/MWCNTs nanocomposites |
Advanced Materials Research |
747 |
575-578 |
| 969 |
2013 |
N.S.Priya, C. Somayaji, S.Kanagaraj |
Oxygen storage capacity of CexZr1-xO2 (0.4?x?0.8) solid solution using thermo-gravimetric analysis |
Advanced Materials Research |
747 |
579-582 |
| 970 |
2013 |
S. Kapuria, P. Kumari |
Extended Kantorovich method for three-dimensional piezoelasticity solution of edge effects in hybrid plates |
Proceeding of Royal Society A |
469 |
1471-2946 |
| 971 |
2013 |
Bibin J. and Kulkarni V. N |
Investigation for energy deposition technique for drag reduction at hypersonic speeds |
Applied Mechanics and Materials |
367 |
222-227 |
| 972 |
2013 |
DN Basu, ND Patil, S Bhattacharyya and PK Das |
Hydrodynamics of a Natural Circulation Loop in a Scaled-down Steam Drum-Riser-Downcomer Assembly |
Nuclear Engineering and Design |
265 |
411-423 |
| 973 |
2013 |
C. Patel, Sumitesh Das, R. Ganesh Narayanan |
CAFE modeling, neural network modeling, and experimental investigation of friction stir welding, Proc. of the IMecheE |
Part C: Journal of Mechanical Engineering Science |
227 |
1164-1176 |
| 974 |
2013 |
Debnath BK, Saha UK, Sahoo N |
Effect of Compression Ratio and Injection Timing on the Operating Characteristics of a Diesel Engine Run on Palm Oil Methyl Ester |
Proc. of the IMechE, Part–A: Journal of Power and Energy |
227 |
368-382 |
| 975 |
2013 |
A. Ghosh, N. Barman, H. Chattopadhyay, and S. Bag |
Modelling of heat transfer in submerged arc welding process |
Proceedings of IMechE, Part B: Journal of Engineering Manufacture |
227 |
1467-1473 |
| 976 |
2013 |
D. J. Bordoloi and R. Tiwari |
Optimization of Support Vector Machine based Multi-Fault Classification with Evolutionary Algorithms from th |
