| 1 |
|
Sunku Prasad J, Sayantan Jana, Viswa I, Muthukumar P |
Experimental Investigation on Absorption and Desorption characteristics of La0.9Ce0.1Ni5 alloy for Hydrogen Storage Application |
International Conference on Innovations in Thermo-Fluid Engineering and Sciences [ICITFES-2020], February 10-12, 2020 at National Institute of Technology, Rourkela, Odisha, India. |
| 2 |
|
Alok Kumar, Nithin N. Raju, Muthukumar P |
Parametric Studies on MmNi4.7Fe0.3 based Reactor with Embedded Cooling Tubes for Hydrogen Storage and Cooling Application. |
International Conference on Innovations in Thermo-Fluid Engineering and Sciences [ICITFES-2020], February 10-12, 2020 at National Institute of Technology, Rourkela, Odisha, India. |
| 3 |
|
Mrinal Bhowmik, Anandalakshmi R, Muthukumar P |
Modelling and Multi-Objective Optimization of Performance Parameters for Counter Flow Dehumidifier |
International Conference on Innovations in Thermo-Fluid Engineering and Sciences [ICITFES-2020], February 10-12, 2020 at National Institute of Technology, Rourkela, Odisha, India. |
| 4 |
|
Arun Kumar M. Lav K Kaushik, Muthukumar P |
Critical Analysis on Unstable Operation of a Self -aspirated Cook-stove with Porous Radiant Burner |
|
| 5 |
|
Pratibha Maurya, Arun Kumar M. Lav K Kaushik, Muthukumar P, |
Comparative Performance Assessments of Canister based Methanol Cook-stove with Kerosene Wick Cook-stove for Domestic Cooking Application |
International Conference on Innovations in Thermo-Fluid Engineering and Sciences [ICITFES-2020], February 10-12, 2020 at National Institute of Technology, Rourkela, Odisha, India. |
| 6 |
|
Partha Pratim Kemprai, Ranganayakulu C, Muthukumar P |
Numerical and Experimental Investigation in Compact Heat Exchanger Surfaces with Wavy Fins |
|
| 7 |
|
Mrinal Bhowmik, M. Joshi, R. Anandalakshmi, Muthukumar P |
Performance Investigations on Twist Tape Based U-Tube Solar Evacuated Tube Collector for Humid Subtropical Region. |
25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), December 28-31, 2019, IIT Roorkee, Roorkee. |
| 8 |
|
Kiran Naik K, Muthukumar P, Mrinal Bhowmi |
Performance Assessment and Comparison of Desiccant Coated Heat Exchanger Type and Desiccant Wheel Type Dehumidification systems |
25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), December 28-31, 2019, IIT Roorkee, Roorkee. |
| 9 |
|
Jasinta Poonam Ekka, Krishnendu Bala, Muthukumar P |
Drying Kinetics of Yellow Turmeric in a Solar Dryer with and without Solar Air Collector under Forced Circulation |
|
| 10 |
|
Kaushik L K, Arun Kumar M. Muthukumar P |
Performance Analysis of a Bio-gas operated Porous Radiant Burner for Domestic Cooking Application |
11th International Exergy, Energy and Environment Symposium (IEEES-11), July 14-18, 2019, Chennai, India |
| 11 |
|
Kiran Naik B and Muthukumar P |
Parametric Studies and Performance Investigation on Novel Multipurpose Liquid Desiccant Drying/Desalination System |
International Conference on Polygeneration (ICP-2019), May 15-17, Kyushu University, Japan. |
| 12 |
|
Mrinal Bhowmi K, Kiran Naik B, Anandalakshmi R, Muthukumar P |
Experimental Investigations of the Dehumidifier Performance Evaluation using Aqueous LiBr-HCOOK Blend |
International Conference on Polygeneration (ICP-2019), May 15-17, Kyushu University, Japan. |
| 13 |
|
Sunku Prasad J, Sayantan Jana, Muthukumar P |
Thermodynamic Studies on Metal Hydride based Tri-generation System for Cooling, Thermal Storage and Thermal Upgradation |
International Conference on Polygeneration (ICP-2019), May 15-17, Kyushu University, Japan. |
| 14 |
|
Vigneshwaran K, Gurpreet Singh Sodhi, Muthukumar, P, Senthilmurugan S |
concrete based Sensible Heat Storage System: Experimental Investigations. Presented at International Conference on Polygeneration |
International Conference on Polygeneration (ICP-2019), May 15-17, Kyushu University, Japan. |
| 15 |
|
Desai F J Atayo A, Muthukumar P, Rahman MM |
Experimental Studies on Endothermic Reversible Reaction of Salts for Cooling |
International Conference on Polygeneration (ICP-2019), May 15-17, Kyushu University, Japan. |
| 16 |
|
Chu X, Zhang J, Dixit U.S., Gu P. |
A precise identification and matching method for customer needs based on sales data. |
Proceedings of the International Conference of Mechanical Design & The 20th Mechanical Design Biennial Conference, August 12-14, Huzhou, Zhejiang, China. (Published in Advances in Mechanical Design, edited by J. Tan, Springer 2020). |
| 17 |
|
Sanjay Raj, Pardeep Pankaj, and Pankaj Biswas |
Microstructure and Mechanical Characterization of Friction Stir Welded Inconel 718 Alloy, |
International Conference on Recent Developments in Mechanical Engineering| ICRAME 2020, 07-09 February 2020, NIT Silchar, India. |
| 18 |
|
Dhara L. N., Pankaj P., Biswas P., |
Influence of Heat Input on Weld Bead Geometry in Metal Inert Gas Welded Thick P91 Steel |
International Conference on Recent Developments in Mechanical Engineering| ICRAME 2020, 07-09 February 2020, NIT Silchar, India. |
| 19 |
|
Pardeep Pankaj, Abhishek Bhardwaj, Avinish Tiwari, Lakshmi Narayan Dhara and Pankaj Biswas, |
Numerical study on Material Flow Behaviour in Friction Stir Welding of Low Carbon Steel, |
International Conference on Recent Developments in Mechanical Engineering| ICRAME 2020, 07-09 February 2020, NIT Silchar, India. |
| 20 |
|
S. Kirtania and D. Chakraborty |
Finite Element based Studies on Elastic Properties of Carbon Nanotube-Reinforced Metal Matrix Composites |
International Conference on Advancements in Mechanical Engineering(ICAME 2020), Aliah University, Kolkata, 16-18 January 2020 |
| 21 |
|
Sureandhar G, Srinivasan G, Muthukumar P, Senthilmurugan S |
Performance evaluation of solar air heater having arc-shaped wire rib with varying roughness height on absorber plate. |
International Conference on Innovations in Thermo-Fluid Engineering and Sciences [ICITFES-2020], February 10-12, 2020 at National Institute of Technology, Rourkela, Odisha, India. |
| 22 |
|
Lakshmi DVN, Muthukumar P |
Energy and Environmental Analyses of Active Solar Dryer for Medicinal Herbs Drying. |
|
| 23 |
|
VA. Raj, A. Ch Borsaikia and U.S. Dixit |
Physical and mechanical properties of Autoclaved Aerated Concrete (AAC) block used in the building wall system: A review |
7th International and 9th National Conference on Advancement and Futuristic Trends in Mechanical and Materials Engineering, AFTME’19, December 5-7, 2019, IIT Ropar |
| 24 |
|
F. Sharma and U.S. Dixit |
Cost comparison of additive manufacturing with traditional manufacturing in the presence of uncertainties |
7th International and 9th National Conference on Advancement and Futuristic Trends in Mechanical and Materials Engineering, AFTME’19, December 5-7, 2019, IIT Ropar |
| 25 |
|
Kashyap, D., Dass, A.K., |
Entropy Generation Analysis of Mixed Convection Flow in a Nanofluid Filled Porous Cavity Using a Two-Component Lattice Boltzmann Method. |
Proceedings of the ASME 2019 Gas Turbine India Conference. Volume 1: Compressors, Fans, and Pumps; Turbines; Heat Transfer; Structures and Dynamics. Chennai, Tamil Nadu, India. December 5-6, V001T03A007. ASME |
| 26 |
|
Saurav Suman, Biswas Pankaj, Basil Kuriachen and Abhijit Sinha |
Thermo-mechanical study of single and multi-pass welding of CSEF steel for residual stresses and deformations considering solid state phase transformation, |
2nd International Conference on Recent Advances in Materials & Manufacturing Technologies, IMMT 2019, Dubai, United Arab Emirates., 20-22 November, 2019, BITS Pilani Dubai Campus. |
| 27 |
|
M.K. Hussain and K.S.R.K. Murth |
NSIFs of 2D elastic bodies with straight and curved sharp V-notche |
First International Conference on Manufacturing, Material Science and Engineering 2019 (ICMMSE 2019), |
| 28 |
|
M.K. Hussain and K.S.R.K. Murth |
Calculation of NSIFs and shape factors of four-point bend specimens containing sharp V-notches |
7th International Congress on Computational Mechanics and Simulation (ICCMS 2019), IIT Mandi, |
| 29 |
|
Shukla, Shiv Sahaya, and K. S. R. K. Murthy |
Numerical analysis of a semi-elliptical surface cracked plate under tension |
First International Conference on Manufacturing, Material Science and Engineering 2019 (ICMMSE 2019), |
| 30 |
|
Saurav Suman, Pankaj Biswas, S. K. Patel, V. P. Singh, Akhileshwar Nirala, Basil Kuriachen, |
Measurement of Residual Stresses in Submerged Arc Welded P91 Steel Using Surface Deformation, |
ICEMT-2019, International Conference on Mechanical and Energy Technologies-2019, Galgotias College of Engineering and Technology, Noida, India. |
| 31 |
|
Pardeep Pankaj, Tiwari Avinish and Biswas Pankaj |
Influence of tool traverse speed on the characteristics of dissimilar friction stir welded DH36 shipbuilding steel-mild steel, |
International Conference on Advanced Materials and Processes for Defence Applications, ADMAT-2019, Sept. 23-25, Defence Metallurgical Research Laboratory (DMRL), Hyderabad. |
| 32 |
|
K. Chatterjee, J. Zhang and U.S. Dixit |
A framework for enhancing machining performance using big research data analytics |
40th MATADOR International Conference on Advanced Manufacturing and Design, July 8-10, 2019, Hangzhou, China. |
| 33 |
|
A. Raj, A. Ch. Borsaikia and U.S. Dixit, , |
Finite element modeling of autoclave aerated concrete (AAC) masonry for estimation of strength |
6th International Conference on Production & Industrial Engineering (CPIE 2019), June 8-10, Dr B R Ambedkar National Institute of Technology Jalandhar. |
| 34 |
|
P.K. Bannaravuri, A.K. Birru and U.S. Dixit |
Effect of laser surface melting on the surface integrity of aluminum composites |
6th International Conference on Production & Industrial Engineering (CPIE 2019), June 8-10, Dr B R Ambedkar National Institute of Technology Jalandhar. |
| 35 |
|
Deepak Sharma, Sukhomay Pal, Aayush Sahay, Puneet Kumar, Gaurav Agarwal, and Katravath Vignesh |
Local Search Heuristics based Genetic Algorithm for Capacitated Vehicle Routing Problem |
2nd International Conference on Computational Methods in Manufacturing (ICCMM), 8 – 9 March 2019, IIT Guwahati, India. |
| 36 |
|
A. Bisht, A. Roy, U. S. Dixit, S. Suwas and V.V. Silberschmidt |
Small-scale machining simulations |
2nd International Conference on Computational Methods in Manufacturing March 8-9, 2019, IIT Guwahati. |
| 37 |
|
Agyapal SINGH, Poonam KUMARI, Ehtesham HUSSAIN |
Analytical Free Vibration Solution Of Functionally Graded Beam Having Longitudinal Stiffness Variation |
10th International Conference on Material for Advanced Technologies, Singapore from 23 to 28 June, 2019 |
| 38 |
|
D.V.N. Lakshmi, Muthukumar P |
Design and development of mixed mode forced convection solar dryer for drying of curcuma zeodaria |
Presented at 12th International Conference on Thermal Engineering: Theory and Applications, February 23-26, 2019, Gandhinagar, India |
| 39 |
|
Kiran Naik B and Muthukumar P |
Energy Exergy and Entransy Analyses of an Air Cooled Condenser Employed in a Vapour Compression Chiller |
Presented at 12th International Conference on Thermal Engineering: Theory and Applications, February 23-26, 2019, Gandhinagar, India |
| 40 |
|
Sunku Prasad J, Saurabh Dongare, Anandalakshmi R, Muthukumar P |
Numerical Investigation of PCM based Heat Sinks under Constant and Variable Heat Load Conditions |
Presented at 12th International Conference on Thermal Engineering: Theory and Applications, February 23-26, 2019, Gandhinagar, India |
| 41 |
|
M.K. Hussain and K.S.R.K. Murthy |
Numerical examination of sharp V-notches using notch-flank displacement collocation method |
International Conference on Advances in Material and Manufacturing Engineering (ICAMME-2019), 15-17 March, Kalinga Institute of Industrial Technology, Bhubaneshwar |
| 42 |
|
Jasinta Poonam Ekka, Muthukumar P |
Determination of Heat Transfer Coefficient and Drying Kinetics of Red chilli Dried in a Mixed Mode Forced Convection |
International Conference on Polygeneration (ICP-2019), May 15-17, Kyushu University, Japan |
| 43 |
|
Avinish Tiwar, Piyush Singh, Pankaj Biswas and Sachin D. Kore |
Friction Stir Welding of AISI 1006 Low Carbon Steel |
1st International Conference on Mechanical Engineering (INCOM 2018), 4- 6 January 2018, Jadavpur University, Jadavpur. |
| 44 |
|
Saurav Suman , Pankaj Biswas , Basil Kuriachen , Abhijit Sinha, , |
Modelling an arc welded fillet joint for minimum welding induced distorsions |
3rd International Conference on Design, Analysis, Manufacturing and Simulation,ICDAMS 2018,Chennai, INDIA, 6-7 April, 2018. |
| 45 |
|
U. S. Dixit |
Keynote in National Conference on Applied Sciences, Sustainable & Evolving Technologies |
63rd Annual Technical Session of Assam Science Society, ASSET 2018, March 9-11, 2018, CIT, Kokrajhar |
| 46 |
|
Lakshmi DVN, Apurba Layek, Muthukumar. P |
Drying of moringa olefera leaves in mixed mode and indirect forced convection solar dryers |
Proceedings of Proceedings of the International Conference on Sustainable Energy and Environmental Challenges (SEEC-2018) 01 – 03, January, 2018, IISc Bangalore |
| 47 |
|
Kaushik L K, Deb S, Muthukumar P |
Life cycle and techno-economic assessments of domestic and commercial LPG cook-stove with porous radiant burner, |
Proceedings of Proceedings of the International Conference on Sustainable Energy and Environmental Challenges (SEEC-2018) 01 – 03, January, 2018, IISc Bangalore |
| 48 |
|
M. Ravi Sankar |
Nano-finishing of Bio-Implants using Polymer Rheological Abrasive Complex Suspensions |
4th International Symposium on Advances in Sustainable Polymers (ASP-2018), 8-11 January, 2018, IIT Guwahati, India. |
| 49 |
|
K.K. Gajrani, A. Kumar, M. Ravi Sankar |
Fabrication of Biodegradable Magnesium Alloy (Az 31) Thin Wall with Minimum Quantity Environmental Friendly Cutting Fluids |
21ST ADNAT Convention and International Symposium on Biodiversity and Biobanking (BIODIVERSE 2018), 27−29 January, 2018, IIT Guwahati, India |
| 50 |
|
K.K. Gajrani, M. Ravi Sankar |
Cutting Fluid Emissions in Mechanical Machining and its Adverse Effects on Biodiversity |
21ST ADNAT Convention and International Symposium on Biodiversity and Biobanking (BIODIVERSE 2018), 27−29 January, 2018, IIT Guwahati, India. |
| 51 |
|
R.R. Behera, A.H.L.Pandey, M. Ravi Sankar |
Laser Surface Bio-Coating of Functionally Graded TiO2-HAp on Textured Ti Alloy for Enhancing Bioactivity and Cell Proliferation |
|
| 52 |
|
M. Bhuyan, A. Sarmah, K.K. Gajrani, A. Pandey, T.G. Thulkar, M. Ravi Sankar |
State of Art on Minimum Quantity Lubrication in Grinding Process |
8th International Conference of Materials Processing and Characterization (ICMPC), 16−18 March, 2018, GRIET Hyderabad, India. |
| 53 |
|
S. Banik, N. Kalita, K.K. Gajrani, R. Kumar, M. Ravi Sankar |
Recent Trends in Laser Assisted Machining of Ceramic Materials |
8th International Conference of Materials Processing and Characterization (ICMPC), 16−18 March, 2018, GRIET Hyderabad, India. |
| 54 |
|
M. Ravi Sankar, V.K. Jain , K.P. Rajurkar |
Rheological and Nano-finishing Studies of Elastically Dominant Multiple Polymers Blend Based Abrasive Flow Finishing Medium |
19th CIRP Conference on Electro Physical and Chemical Machining, 23-27 April 2018, Bilbao, Spain, (Accepted). |
| 55 |
|
Lakshmi DVN, Apurba Layek, Muthukumar, P |
Evaluation of Convective Heat Transfer Coefficient of Herbs Dried in a Mixed Mode Solar Dryer |
Presented at ICUE 2018 on: Green Energy for Sustainable Development, Phuket, Thailand, 24-26 Oct 2018 |
| 56 |
|
Kaushik L K, Muthukumar P |
Experimental Analysis of a Porous Radiant Pressurized Cook Stove by Using a Blend of Waste Cooking Oil (WCO) and Kerosene |
Presented at ICUE 2018 on: Green Energy for Sustainable Development, Phuket, Thailand, 24-26 Oct 2018 |
| 57 |
|
Lav Kumar Kaushik, Muthukumar P |
Performance Assessment of a Porous Radiant Cook Stove Fueled with Blend of Waste Vegetable Oil (WVO) and Kerosene |
Presented at The 10th International Conference on Applied Energy (ICAE2018), 22-25 August 2018, Hong Kong |
| 58 |
|
Gurpreet Singh Sodhi, Vigneshwaran K, Abhishek Kumar Jaiswal, Muthukumar P |
Assessment of Heat Transfer Characteristics of a Latent Heat Thermal Energy Storage System: Multi Tube Design |
. Presented at The 10th International Conference on Applied Energy (ICAE2018), 22-25 August 2018, Hong Kong |
| 59 |
|
Nithin N. Raju, Muthukumar P, K. Malleswararao |
Determination of Absorption Conditions for LaNi4.7Al0.3 Based Hydrogen Storage Device: A Numerical Investigation |
5th International Conference on Computation Methods for Thermal Problems (Thermacomp 2018), Bangalore, India, July 9-11, 2018 |
| 60 |
|
Gurpreet Singh Sodhi, Muthukumar P |
Effect of eccentricity on the charging of a multi tube Latent Heat Storage System |
Presented at 5th International Conference on Computational Methods for Thermal Problems (THERMACOMP – 2018), Indian Institute of Science, Bangalore, July 9-11, 2018 |
| 61 |
|
Mrinal Bhowmik, Muthukumar P, R Anandalakshmi |
Numerical Study on Dehumidification Performance of a Cross-Flow Liquid Desiccant Adiabatic Dehumidifier with Various Halide Salt desiccants |
Presented at 5th International Conference on Computational Methods for Thermal Problems (THERMACOMP – 2018). IISc Bangalore - 9-11 July, 2018 |
| 62 |
|
U.S. Dixit |
Keynote in National Conference on Applied Sciences, Sustainable & Evolving Technologies, 63rd Annual Technical Session of Assam Science Society |
ASSET 2018, March 9-11, 2018, CIT, Kokrajhar |
| 63 |
|
R.R. Behera, A.H., L.Pandey, M. Ravi Sankar, |
Laser Surface Bio-Coating of Functionally Graded TiO2-HAp on Textured Ti Alloy for Enhancing Bioactivity and |
Cell Proliferation” 2018. |
| 64 |
|
M.K. Hussain and K.S.R.K. Murthy |
Numerical estimation of notch stress intensity factors of sharp V–notches |
Proceedings of 3rd International Conference on Design, Analysis, Manufacturing & Simulation (ICDAMS-2018), 6-7 April, Saveetha School of Engineering, Chennai. |
| 65 |
|
M. K. Hussain and K. S. R. K. Murthy |
Comparison of some least-squares methods for evaluation of the notch stress intensities of sharp V-notched configurations |
3rd International Conference on Advances in Materials and Manufacturing Applications (IConAMMA-2018), 16–18 August, Amrita School of Engineering, Bengaluru, India |
| 66 |
|
M.K. Hussain and K.S.R.K. Murthy |
Evaluation of notch stress intensities at sharp V-notches using a point substitution method |
Second International Conference On Structural Integrity (ICONS-2018), 14-17 December, Indian Institute of Technology Madras, Chennai. |
| 67 |
|
Kishor Kumar Gajrani, Y. Bishal Singha, Mamilla Ravi Sankar and Uday Shanker Dixit, |
Tribological Performance of Graphite, CaF2 and MoS2 Coated Mechanical Micro-Textured Self-Lubricating Cutting Tool Material |
CPIE-2018, 27th June 2018, Bangkok. |
| 68 |
|
M. Ravi Sankar, Vijay Kumar Jain, K.P. Rajukar |
Rheological and Nano-finishing Studies of Elastically Dominant Multiple Polymers Blend Abrasivve Flow Finishing Medium |
19th CIRP Conference on Electro Physical and Chemical Machining, 23-27 April 2018, Bilbao, Spain. |
| 69 |
|
Kishor Kumar Gajrani, M. Ravi Sankar, |
Cutting Fluids Emissions in Mechanical Machining and its Adverse Effects on Biodiversity |
21stADNAT Convention and International Symposium on Biodiversity and Biobanking (BIODIVERSE-2018), 27-29 January, IIT Guwahati, India, 2018 |
| 70 |
|
Sarita Bharti, S Senthilvelan, |
SURFACE DURABILITY OF POLYAMIDE 66 SPUR GEAR UNDER DRY AND OIL LUBRICANT CONDITION |
FISITA 2018 Word Auotmotive Congress, 2-5 October 2018, Chennai,India |
| 71 |
|
Adidtya Kumar, Karthick Pandia, S Senthilvelan |
BENDING FATIGUE PERFORMANCE OF INJECTION-MOLDED CARBON NANOTUBE REINFORCED POLYPROPYLENE SPUR GEARS |
FISITA 2018 Word Auotmotive Congress, 2-5 October 2018, Chennai,India |
| 72 |
|
Pardeep Pankaj and Pankaj Biswas |
Study of thermally induced residual stress and deformation in the CO2 laser welding of AISI 304 stainless steel thin plates |
AIMTDR-2018, December 13-15, College of Engineering, Anna University,Chennai |
| 73 |
|
Pardeep Pankaj and Pankaj Biswas |
Dissimilar FSW od DH36 shipbuilding steel and mild steel |
AIMTDR-2018, December 13-15, College of Engineering, Anna University,Chennai |
| 74 |
|
Nandan Kanan Das, Arun Kadian, Avinish Tiwari, Pardeep Pankaj and Pankaj Biswas |
Transient Thermal Analysis of Friction stir welding of AA6061 |
CPIE-2018, Thiland, Bankok. |
| 75 |
|
Avinish Tiwari, Pardeep Pankaj , Nandan Kanan Das and Pankaj Biswas |
Joint Quality Evaluation of Shipbuilding Grade DH36 Steel Using WC-10% Co Alloy Based FSW Tool |
AIMTDR 2018, Anna University, Chennai |
| 76 |
|
Kumar Abhishek and Biswas Pankaj |
Effect of Process Parameters of Plasma Arc Preheating on Low Carbon Steel |
International Conference on Computational Methods in Manufacturing March 8-9, IIT Guwahati |
| 77 |
|
Avinish Tiwari, Pardeep Pankaj, Piyush Singh, Pankaj Biswas and Sachin D. Kore |
FSW of DH36 shipbuilding grade steel |
5th International Conference on Production and Industrial Engineering (CPIE-2018), 26-29 June Bangkok, Thailand |
| 78 |
|
Saurav Suman, Avinish Tiwari, Pardeep Pankaj, Pankaj Biswas |
Numerical study of welding distortion in saw welded creep strength enhanced ferrite steel joint |
International Conference on Recent Innovations and Developments in Mechanical Engineering, Nov-18, NIT Meghalaya. |
| 79 |
|
Saurav Suman, Pardeep Pankaj, Avinish Tiwari, Pankaj Biswas, Basil Kuriachen, Abhijit Sinha |
Effect of pre and post welding processes on the distortion pattern in a SAW welded butt joint of P91 steel plate |
AIMTDR, Dec-18 Anna University |
| 80 |
|
Y Gawade, Sudip Shyam, Balkrishna Mehta |
Pressure Characteristics of Single Isolated Ferrofluidic Slug under the Influence of External Magnetic Feild |
, 7th International and 45th national conference on Fluid Mechanics and Fluid power, Dec 10-12, 2018, IIT Bombay |
| 81 |
|
D. Shankar, M. Pandey, D.N. Basu |
Coupled-Neutronic-Thermalhydraulic Stability Appraisal of Supercritical Forced Flow Channels Following Lumped Parameter Approach |
Proceedings of 16 International Heat Transfer Conference (IHTC-16), Beijing, China, August 10-15, 2018, Paper ID IHTC16-23961 |
| 82 |
|
Hotta, S. K., Rout, A. K., Sahoo, N., Mohanty K |
Effect of compression ratio on the cyclic variability and thermal efficiency of a biogas fueled spark igniton engine |
7th International and 45th National Conference on Fluid Mechanics and Fluid Power, Dec 10-12, 2018, Indian Institute of Technology, Bombay, India |
| 83 |
|
Arnab Kr. De |
A diffuse interface immersed boundary method for complex moving boundary problems |
Journal of computational Physics , Vol. 366, 226-251, 2018. |
| 84 |
|
A. K. De, V. Eswaran and P. K. Mishra |
Dynamics of plumes in turbulent Rayleigh-Bénard convection |
European Journal of Mechanics - B/Fluids , vol. 72, 164-178, 2018 |
| 85 |
|
Saurav Suman, Avinish Tiwari, Pardeep Pankaj, Pankaj Biswas, Basil Kuriachen, Abhijit Sinha |
Modelling of welding sequences for minimization of weld induced distortions and residual stresses |
AIMTDR, Dec-18, Anna University |
| 86 |
|
Debabrata Chakraborty, Debaleena Chakraborty, and K. S R. K. Murthy |
A finite element based procedure for accurate determination of mode I SIF of orthotropic materials based on two parameter strain series |
9th ICCM 2018, August 6-10, 2018, University of Sapienza, Rome, Italy |
| 87 |
|
G.C. Verma, P.M. Pandey and U.S. Dixit, |
Experimental investigations to evaluate machining accuracy of ultrasonic assisted milling on thin-walled structures |
7th International and 28th All India Manufacturing Technology, Design and Research (AIMTDR) Conference, December 13-15, 2018, Anna University, Chennai. |
| 88 |
|
F. Chen, J. Zhang, M. Wu, X. Chu and U.S. Dixit |
Design of open battery pack interface for electric vehicle personalization |
7th International and 28th All India Manufacturing Technology, Design and Research (AIMTDR) Conference, December 13-15, 2018, Anna University, Chennai. |
| 89 |
|
A. Raj, A. Ch Borsaikia and U.S. Dixit |
Manufacturing of autoclaved aerated concrete (AAC): present status and future trends |
7th International and 28th All India Manufacturing Technology, Design and Research (AIMTDR) Conference, December 13-15, 2018, Anna University, Chennai. |
| 90 |
|
Avinish Tiwar, Piyush Singh, Pankaj Biswas and Sachin D. Kore |
Effect of traverse speed on FSW of AISI 1006 low carbon steel |
10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 2017), 7-9 December 2017, IIT Madras. |
| 91 |
|
Jasinta PE, Lakshmi DVN, Yashwant K, Muthukumar. P |
Drying characteristic of mixed mode type solar dryer using forced convection and thermal storage for ginger |
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer conference (ihmtc-2017), BITS Pilani, Hyderabad, December 27-30, 2017 |
| 92 |
|
Lakshmi DVN, Muthukumar P, Apurba Layek, Abhimanyu KS, Sushoban D |
Performance analysis of double pass counter flow solar air heater for drying application |
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer conference (ihmtc-2017), BITS Pilani, Hyderabad, December 27-30, 2017 |
| 93 |
|
Kaushik L K, Deb S, Muthukumar P |
Assessment of energy saving potential in self aspirated LPG stove with porous radiant burner |
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer conference (ihmtc-2017), BITS Pilani, Hyderabad, December 27-30, 2017. |
| 94 |
|
Niyas H, Muthukumar P |
Appropriate sizing prediction and performance evaluation of the shell-and-tube latent heat storage uni |
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer conference (ihmtc-2017), BITS Pilani, Hyderabad, December 27-30, 2017 |
| 95 |
|
Lakshmi DVN, Apurba Layek, Muthukumar, P |
Performance analysis of a mixed mode forced convection solar dryer with and without thermal energy storage heat exchanger |
Presented at International Conference on Mechanical Materials and Renewable Energy, Sikkim Manipal Institute of Technology, Sikkim,8-10th Dec 2017 |
| 96 |
|
Kaushik L K, Deb S, Muthukumar P. |
Energy Saving and Techno-economic Assessment of Self Aspirated Domestic LPG Stove with Porous Radiant Burner |
Presented at International Conference on Mechanical Materials and Renewable Energy, Sikkim Manipal Institute of Technology, Sikkim,8-10th Dec 2017 |
| 97 |
|
A. Singh, N. A. Manikandan, M. Ravi Sankar, K. Pakshirajan, L. Roy |
Experimental Investigation and Surface Morphology of Bio-Micromachining on Copper |
7th International Conference of Materials Processing and Characterization (ICMPC), 17-19 March, 2017, GRIET Hyderabad, India, 2017. |
| 98 |
|
B.V. Ramanaiah, B. Manikanta, M. Ravi Sankar, M.Malhotra, K. Kumar Gajrani |
Experimental Study of Deflection and Surface Roughness in Thin Wall Machining of Aluminum Alloy |
7th International Conference of Materials Processing and Characterization (ICMPC), 17-19 March, 2017, GRIET Hyderabad, India, 2017. |
| 99 |
|
K. Kumar Gajrani, P. S. Suvin, S.Vasu Kailash, M. Ravi Sankar |
Comparative studies on thermal, rheological behavior of eco-friendly cutting fluids and their machining performance |
6th International and 27th All India Manufacturing Technology Design and Research (AIMTDR) Conference, 16-18 December, 2016, COEP Pune |
| 100 |
|
K. Kumar Gajrani, S. Kumar Mallick,M. Ravi Sankar |
Comparative Studies on Mineral Oil, Eco Friendly Bio-Cutting Fluids Treatment and their Machining Performance |
,National Conference on Sustainable Mechanical Engineering: Today and Beyond (SMETB), March 25-26, 2017, Tezpur University, India.(Best Paper Award) |
| 101 |
|
M. Ravi Sankar, K. Kumar Gajrani |
Cutting Fluid Emissions and Eco-Friendly Cutting Fluid for Sustainable Machining |
Proceedings of the National Conference on Sustainable Mechanical Engineering: Today and Beyond (SMETB), March 25-26, 2017, Tezpur University, Assam, India. |
| 102 |
|
A. Singh, N. A. Manikandan, M. Ravi Sankar, K. Pakshirajan, L. Roy |
Development of Nozzle Feature on Copper Surface by Bio-Micromachining |
International Conference on Manufacturing Technology and Simulation (ICMTS), 7-8 July, 2017, IIT Madras, India, 2017. (Best Paper Award) |
| 103 |
|
S. Singh, M. Ravi Sankar, P. Ranjan, R. Balasubramaniam |
Development and rheological study of the polymer blended viscoelastic medium for finishing of microholes |
2nd International conference on Advanced Materials Research and Manufacturing Technologies (AMRMT-2017), Aug 02-05, 2017, Phuket, Thailand (Best Presenter Award to M. Ravi Sankar) |
| 104 |
|
M. Ravi Sankar |
Nanofinishing of Bio-Implants using Polymer Rheological Abrasive Complex Suspensions |
6th Asian Biomaterials Congress (ABMC-2017), October 25-27, 2017. Thiruvananthapuram, India |
| 105 |
|
M. Ravi Sankar, V.K. Jain, K.P. Rajurkar |
Rheological and Nano-finishing Studies of Elastically Dominant Multiple Polymers Blend Based Abrasive Flow Finishing Medium |
International Conference on Advances in Polymer Science and Technology (APA-2017), 23-25 November, 2017, New Delhi, India. |
| 106 |
|
A.Johnney Mertens and S. Senthilvelan |
Adhesive Wear Performance of PP/MWCNT Composites |
International Conference on Advances in Manufacturing and Materials Engineering AMEE2014 NIT Suratkal March 27th-29th, 2014 Also Published in Procedia Materials Science Volume 5, 2014 |
| 107 |
|
Rasmi Ranjan Behera, Abhsar Hasan, Lalit Mohan Pandey, M. Ravi Sankar, |
Laser Surface Bio-Coating of Functionally Graded TiO2-HAp on Textured Ti Alloy for Enhancing Bioactivity and Cell Profileration” |
|
| 108 |
|
M. Ravi Sankar |
Nano-finishing of Bio-Implants using Polymer Rheological Abrasive Complex Suspensions |
4th International Symposium on Advances in Sustainable Polymers (ASP-2018), 8-11 January, 2018, IIT Guwahati, India |
