1. Patel, P., Pandey, L. and Uppaluri R. , "Adsorptive removal of Zn, Fe, and Pb from Zn dominant simulated industrial wastewater solution using polyvinyl alcohol grafted chitosan variant resins", Chemical Engineering Journal, 459, 141563, https://doi.org/10.1016/j.cej.2023.141563 [2023]

2. Rammohan D., Kishore N., Uppaluri R., "Kinetics and Thermodynamic investigation of pyrolysis of butyl rubber tube waste", European Journal of Sustainable Development Research, 7, 2, em0215, https://doi.org/10.29333/ejosdr/12878 [2023]

3. Rammohan D., Kishore N., Uppaluri R., "Thermogravimetric analysis of pyrolysis of Delonix regia biomass in the presence of zeolite, mixed metal oxides and carbon supported noble metal catalysts", Results in Engineering, 17, 100936, https://doi.org/10.1016/j.rineng.2023.100936 [2023]

4. Dhara S., Purkait M. K., and Uppaluri R. , "High-purity alkaline lignin extraction from Saccharum ravannae and optimization of lignin recovery through RSM (Response Surface Methodology)", International Journal of Biological Macromolecules , 234, 123594, https://doi.org/10.1016/j.ijbiomac.2023.123594 [2023]

5. Bhattacharjee U., and Uppaluri R., "Growth and nutritional characteristics of Phaseolus vulgaris and Jeevamrutha bio-fertilizer-vermicompost system", Bioresource Technology Reports, 22 [2023]

6. Kumudhini Akasapu and Uppaluri R., "Efficacy of score deviation method as a novel sensory evaluation technique for the identification of optimal mixed vegetable soup formulations", International Journal of Gastronomy and Food Science, 33 [2023]

7. Kamal Narayan Baruah, Siddhartha Singha and Uppaluri R., "Determination of Catechin Contents in S3A3 and TV18 Tea Cultivar using HPLC Method", Agricultural Engineering, 55, 11-18 [2023]

8. Kamal Narayan Baruah, Siddhartha Singha and Uppaluri R., "Preparation of potato starch nanoparticles using acid hydrolysis and ultrasonic post-treatment", ACS Food Science and Technology, 3, 626-634 [2023]

9. Wani Khalid M., Uppaluri R., "Efficacy of ionic gelation based encapsulation of bioactves from papaya leaf extract: characterization and storage stability", Biomass Conversion and Biorefinery, 1-18 [2023]

10. Singh T., Uppaluri R., "Feed-forward ANN and traditional machine learning-based prediction of biogas generation rate from meteorological and organic waste parameters", The Journal of Supercomputing [2023]

11. Singh T., Uppaluri R., "Optimizing biogas production: A novel hybrid approach using anaerobic digestion calculator and machine learning techniques on Indian biogas plant", Clean Technologies and Environmental Policy, 1-25 [2023]

12. Singh T., Uppaluri R., "Application of ANN and traditional ML algorithms in modelling compost production under different climatic conditions", Neural Computing and Applications, 35, 18, 13465-13484 [2023]

13. Swagata P., Uppaluri R., and Animes K. Golder, "Ultrasensitive Colorimetric Detection and Determination of Hg(II) Using Bio inspired AgNPs Synthesized from Mature Camellia Sinensis Leaves", Results in Optics, 11 [2023]

14. Dhara S., Sekhar S., Niladri D., Pranjal, Uppaluri R., and Purkait M. K., "Ravenna grass extracted alkaline lignin-based polysulfone mixed matrix membrane (MMM) for aqueous Cr (VI) removal", ACS Applied Polymer Materials, 5, 8, 6399-6411 [2023]

15. Patel, P., Pandey, L. and Uppaluri R., "Synthesized carboxymethyl-chitosan variant composites for cyclic adsorption-desorption based removal of Fe, Pb and Cu, Chemosphere", Chemosphere, 340 [2023]

16. Patel, P., Pandey, L. and Uppaluri R., "Cyclic desorption based efficacy of polyvinyl alcohol-chitosan variant resins for multi heavy-metal removal", International Journal of Biological Macromolecules, 242 [2023]

17. Hanumanth Reddy P., Prince Kumar B., Uppaluri R., "Selective aerobic-oxidation of glycerol to lactic acid over ruthenium-vanadium bimetallic catalysts", Journal of Industrial and Engineering Chemistry, 124, 224-231 [2023]

18. Bhattacharjee U., and Uppaluri R., "Production and optimization of Jeevamrutha bio-fertilizer formulations for soil fertility and its role in waste minimization", Elsevier, 2 [2023]

19. Kamal Narayan Baruah, Siddhartha Singha and Uppaluri R., "Optimization of the enzymatic extraction of catechins from Assam tea leaves", Springer , 1-25 [2023]

20. Wani Khalid M., and Uppaluri R , "Characterization of Pectin extracted from Pomelo Peel using Pulsed ultrasound assisted extraction and acidic hot water extraction process", Applied Food Research, 3, 2 [2023]

21. Hanumanth Reddy P., Ramu Reddi, Ramagopal Uppaluri and Nageswara Rao Peela, "Glycerol selective oxidation to lactic acid over platinum-vanadium bimetallic catalysts supported on activated carbon", Reaction Chemistry & Engineering [2023]

22. Paushali M., Baruah K. N., and Uppaluri R., "Encapsulation and characterization of green tea extracts using green methods: a comparative study of inclusion complexation and ion gelation", Journal of Food Measurement and Characterization [2023]

23. Wani Khalid M., Uppaluri R., "Comparative efficacy of ultrasound assisted and hot water extraction of papaya leaf, Journal of Herbal Medicine", Journal of Herbal Medicine [2023]

24. Patel, P., Pandey, L. and Uppaluri R., "Highly effective removal of multi-heavy metals from simulated industrial effluent through an adsorption process employing carboxymethyl-chitosan composites", Environmental Research [2023]

1. Patel P. K., Nagireddi S., Uppaluri R. and Pandey L. M., "Batch adsorption characteristics of Dowex Marathon MSA commercial resin for Au(III) removal from synthetic electroless plating solutions", Materials Today: Proceedings, 68, 824-829, https://doi.org/10.1016/j.matpr.2022.06.258 [2022]

2. Mukherjee P., Mondal I. H., Rangan R. and Uppaluri R., "RSM based optimal drying-parameters of unripe-papaya (Carica papaya L.)", Materials Today: Proceedings, 68, 854-861, https://doi.org/10.1016/j.matpr.2022.06.350 [2022]

3. Wani Khalid M. and Uppaluri R., "Pulsed ultrasound-assisted extraction of bioactive compounds from papaya pulp and papaya peel using response surface methodology: Optimization and comparison with hot water extraction", Applied Food Research, 2, 2, 100178, https://doi.org/10.1016/j.afres.2022.100178 [2022]

4. Wani Khalid M. and Uppaluri R., "Continuous and pulsed ultrasound-assisted extraction of pectin from pomelo fruit peel using citric acid", Biomass Conversion and Biorefinery, 1, 1-16, https://doi.org/10.1007/s13399-022-03513-x [2022]

5. Wani Khalid M. and Uppaluri R., "Efficacy of ultrasound-assisted extraction of bioactive constituents from Psidium guajava leaves", Applied Food Research, 2, 1, 100096, https://doi.org/10.1016/j.afres.2022.100096 [2022]

6. Rammohan D., Kishore N., Uppaluri R., "Pyro–catalytic co–pyrolysis of Delonix regia and butyl rubber tube: Kinetic modelling and thermodynamic insights", Renewable Energy, 201, 194-203, https://doi.org/10.1016/j.renene.2022.10.099 [2022]

7. Rammohan D., Kishore N. and Uppaluri R., "Reaction kinetics and thermodynamic analysis of non-isothermal copyrolysis of Delonix regia and tube waste", Bioresource Technology Reports, 18, 101032, https://doi.org/10.1016/j.biteb.2022.101032 [2022]

8. Rammohan D., Kishore N., Uppaluri R., " Insights on kinetic triplets and thermodynamic analysis of Delonix regia biomass pyrolysis", Bioresource Technology, 358, 127375, https://doi.org/10.1016/j.biortech.2022.127375 [2022]

9. Rambabu P., Patel S., Gogoi D., Uppaluri R., Peela N. R., "Optofluidic microreactor for the photocatalytic water splitting to produce green hydrogen", International Journal of Hydrogen Energy, 47, 4, 2152-2163, https://doi.org/10.1016/j.ijhydene.2021.10.171 [2022]

10. Singh T., Uppaluri R., "Machine leaning tool-based prediction and forecasting of municipal solid waste generation rate: a case study in Guwahati, Assam, India", International Journal of Environmental Science and Technology, 1-24, https://doi.org/10.1007/s13762-022-04644-4 [2022]

11. Bhattacharjee U. and Uppaluri R., "Screening and scoping of precursors associated to the production of Jeevamrutha bio-fertilizer", Materials Today: Proceedings, 68, 4, 679-685, https://doi.org/10.1016/j.matpr.2022.05.410 [2022]

12. Imdadul H. Mondal, Uppaluri R., "Tray drying characteristics of Musa splendida and Musa Balbisiana Colla pseudo-stem", Journal of Thermal Analysis and Calorimetry, 147, 8743-8756 [2022]

1. Sushma C., Uppaluri R. and Das C., "Efficacy of sonication-microfiltration hybrid process for the production of clarified bitter gourd extracts", Journal of Food Process Engineering, 44, 11, e13854, https://doi.org/10.1111/jfpe.13854 [2021]

2. Talukdar P. and Uppaluri R., "Process and product characteristics of refractance window dried Curcuma Longa", Journal of Food Science, 86, 2, 443-453, https://doi.org/10.1111/1750-3841.15587 [2021]

1. Sushma C., Das C., and Uppaluri R., "Effect of Pore Former (Saw Dust) Characteristics on the Properties of Sub-micron range Low Cost Ceramic membranes", International Journal of Ceramic Engineering & Science, 2, 5, 243-253, https://doi.org/10.1002/ces2.10061 [2020]

2. Saxena R., Syam U. A., De M., Uppaluri R. and Qureshi M., "Supported palladium nanoclusters: morphological modification towards enhancement of catalytic performance using surfactant-assisted metal deposition", Applied Nanoscience, 20, 1793-1809, https://doi.org/10.1007/s13204-019-01248-2 [2020]

3. Sushma Chakraborty, Uppaluri R., and Chandan Das, "Combinatorial Optimality of Membrane Morphology and Feedstock during Microfiltration of Bottle Gourd Juice", Innovative Food Science and Emerging Technologies, 63, 102382, doi: 10.1016/j.ifset.2020.102382 [2020]

4. Sushma Chakraborty, Uppaluri R., and Chandan Das, "Feasibility of low cost kaolin based ceramic membranes for organic Lagernaria siceraria juice production", Food and Bioprocess Technology, 13, 1009-2013, https://doi.org/10.1007/s11947-020-02455-4 [2020]

5. Sushma Chakraborty, Uppaluri R., and Chandan Das, "Optimization of ultrasound-assisted extraction (UAE) process for the recovery of bioactive compounds from bitter gourd using response surface methodology", Food and Bioproducts processing, 120, 114-122, https://doi.org/10.1016/j.fbp.2020.01.003 [2020]

6. Mondal I. H., Rangan R. and Uppaluri R., "Process-product characteristics of tray dried Benincasa hispida", Journal of Food Processing and Preservation, 44, 9, e14697, https://doi.org/10.1111/jfpp.14697 [2020]

7. Mondal I. H., Rangan R. and Uppaluri R., "Symphony of kinetics and statistical design approaches for response analysis during tray drying of Lagernaria siceraria leaves", Journal of Thermal Analysis and Calorimetry, 145, 2389-2403, https://doi.org/10.1007/s10973-020-09782-w [2020]

8. Mondal I. H., Rangan R. and Uppaluri R., "Parametric optimality of tray dried Musa balbisiana blossom", Journal of Food Science and Technology, 57, 4599-4612, https://doi.org/10.1007/s13197-020-04498-z [2020]

9. Aritra Das, Srirupa Bhattacharya, Chandan Das and Uppaluri R., "Optimality of Poly-vinyl alcohol/Starch/Glycerol/Citric Acid in Wound Dressing Applicable Composite Films", International Journal of Biological Macromolecules, 155, 260-272, https://doi.org/10.1016/j.ijbiomac.2020.03.185 [2020]

10. Aritra Das, Chandan Das and Uppaluri R., "Compositional synergy of poly-vinyl alcohol, starch, glycerol and citric acid concentrations during wound dressing films fabrication", International Journal of Biological Macromolecules, 146, 70-79, https://doi.org/10.1016/j.ijbiomac.2019.12.178 [2020]

11. Mondal I. H., Rangan R. and Uppaluri R., "A robust and novel methodology for the optimal targeting of leafy vegetable mix soup formulations", LWT Food Science and Technology, 134 [2020]

1. Saha R., Uppaluri R., and Tiwari P., "Impact of Natural Surfactant (Reetha), Polymer (Xanthan Gum) and Silica Nanoparticles to Enhance Heavy crude oil recovery", Energy & Fuels, 33(5), 4225-4236, http://dx.doi.org/10.1021/acs.energyfuels.9b00790 [2019]

2. Srinu N., Golder A. K. and Uppaluri R., "Combinatorial optimality of functional groups, process parameters and Pd(II) adsorption-desorption characteristics for commercial anion exchange resins-synthetic electroless plating systems", Environmental Science and Pollution Research, 27, 24614-24626, https://doi.org/10.1007/s11356-019-05941-1 [2019]

3. Srinu N., Golder A. K. and Uppaluri R., "Role of EDTA on the Pd(II) adsorption characteristics of chitosan cross-linked 3-Amino-1,2,4-triazole-5-thiol derivative from synthetic electroless plating solutions", International Journal of Biological Macromolecules, 127, 320-329, https://doi.org/10.1016/j.ijbiomac.2019.01.033 [2019]

4. Aritra Das, Chandan Das and Uppaluri R., "Feasibility of poly-vinyl alcohol/starch/citric acid composite films for wound dressing applications", International Journal of Biological Macromolecules, 131, 998-1007, https://doi.org/10.1016/j.ijbiomac.2019.03.160 [2019]

5. Mondal I. H., Rangan R. and Uppaluri R., " Effect of oven and intermittent airflow assisted tray drying methods on nutritional parameters of few leafy and non-leafy vegetables of North-east India", Heliyon, 5, 11, e029342, DOI:10.1016/j.heliyon.2019.e02934 [2019]

1. Sushma C., Das C., and Uppaluri R., "Optimal fabrication of carbonate free low cost ceramic membranes using mixture model response surface methodology", Applied Clay Science, 162, 101-112, https://doi.org/10.1016/j.clay.2018.06.002 [2018]

2. Pujari M., Amrita A., Uppaluri R., and Verma A., "Role of surfactant induced chromia barriers on performance characteristics of Pd composite membranes", Chemical Engineering Communications, 207, 253-262, https://doi.org/10.1080/00986445.2019.1581616 [2018]

3. Saha R., Uppaluri R., and Tiwari P., "Silica nanoparticle assisted polymer flooding of heavy crude oil: emulsification, rheology and wettability alteration characteristics", Industrial and Engineering Chemistry Research, 57(18), 6364-6376, http://dx.doi.org/10.1021/acs.iecr.8b00540 [2018]

4. Saha R., Uppaluri R., and Tiwari P., "Effects of interfacial tension, oil break time, emulsification and wettability alteration on oil recovery for carbonate reservoirs", Colloids and Surfaces A: Physicochemical and Engineering Aspects, 559, 92-103, https://doi.org/10.1016/j.colsurfa.2018.09.045 [2018]

5. Saha R., Aditi S., Uppaluri R., and Tiwari P., "Interfacial interaction and emulsification of crude oil to enhance oil recovery", International Journal of Oil, Gas and Coal Technology, 22, 1-15, https://dx.doi.org/10.1504/IJOGCT.2018.10011553 [2018]

6. Srinu N., Golder A. K. and Uppaluri R., "Role of protonation and functional groups in Pd(II) recovery and reuse characteristics of commercial anion exchange resin-synthetic electroless plating solutions systems", Journal of Water Process Engineering, 22, 227-238, https://doi.org/10.1016/j.jwpe.2018.02.008 [2018]

1. Vasanth D., Pugazhenthi G., and Uppaluri R., "Preparation, Characterization and Performance Evaluation of LTA Zeolite-Ceramic Composite Membrane by Separation of BSA from Aqueous Solution", Separation Science and Technology, 52, 4, 767-777, https://doi.org/10.1080/01496395.2016.1260142 [2017]

2. Chandrasekhar B., Amit Kumar and Uppaluri R., "Global optimality of RO seawater desalination networks with permeate reprocessing and recycle", Separation Science and Technology, 52, 7, 1225-1239, https://doi.org/10.1080/01496395.2017.1284867 [2017]

3. Saha R., Uppaluri R. and Tiwari P., "Influence of emulsification, interfacial tension, wettability alteration and saponification on residual oil recovery by alkali flooding", Journal of Industrial and Engineering Chemistry, 59, 286-296, https://doi.org/10.1016/j.jiec.2017.10.034 [2017]

4. Saha R., Uppaluri R. and Tiwari P., "Effect of Mineralogy on the adsorption characteristics of surfactant-reservoir rock system", Colloids and Surfaces A: Physicochemical and Engineering Aspects, 531, 121-132, https://doi.org/10.1016/j.colsurfa.2017.07.039 [2017]

5. Srinu N., Uppaluri R., and Katiyar V., "Pd(II) adsorption characteristics of glutaraldehyde cross-linked chitosan copolymer resin", International Journal of Biological Macromolecules, 94, Part A, 72-84, https://doi.org/10.1016/j.ijbiomac.2016.09.088 [2017]

6. Srinu N., Golder A. K. and Uppaluri R., "Investigation on Pd(II) removal and recovery characteristics of chitosan from electroless plating solutions", Journal of Water Process Engineering, 19, 8-17, https://doi.org/10.1016/j.jwpe.2017.06.017 [2017]

7. Rajesh Y., Srinu N., Namra G., and Uppaluri R., "Preparation, characterization and Pd(II) adsorption characteristics of chitosan-AC composites from electroless plating solutions", Desalination and Water Treatment, 84, 279-291, http://dx.doi.org/10.5004/dwt.2017.21097 [2017]

8. Suresh K., Manish Kumar G., Pugazhenthi G., and Uppaluri R., "Enhanced mechanical and thermal properties of polystyrene (PS) nanocomposites prepared with modified Ni-Al layered double hydroxide (LDH) via melt intercalation technique", Journal of Science – Advanced Materials and Devices, 2, 2, 245-254, https://doi.org/10.1016/j.jsamd.2017.05.003 [2017]

9. Suresh K., Pugazhenthi G., and Uppaluri R., "Properties of Polystyrene (PS)/Co-Al LDH Nanocomposites Prepared by Melt Intercalation", Material Today: Proceedings, 9, 2, 330-350, https://doi.org/10.1016/j.matpr.2019.02.163 [2017]

10. Suresh K., Pugazhenthi G., and Uppaluri R., "Preparation and Characterization of hydrothermally Engineering TiO¬2¬-Fly ash Composite Membranes", Frontiers of Chemical Science and Engineering , 11, 2, 266-279 [2017]

1. Rajesh Y., Namrata G. and Uppaluri R. , "Ni (II) adsorption characteristics of commercial activated carbon from synthetic electroless plating solutions", Desalination and Water Treatment, 57, 29, 13807-13817, https://doi.org/10.1080/19443994.2015.1070756 [2016]

2. Suresh K., Pugazhenthi G., and Uppaluri R., "Fly ash based ceramic microfiltration membranes for oil-water emulsion treatment: Parametric optimization using response surface methodology", Journal of water process engineering, 13, 27-43, https://doi.org/10.1016/j.jwpe.2016.07.008 [2016]

3. Kaniganti C. M., Charan Sai Bugadala and Uppaluri R., "Identification of Optimal Rate Enhanced Silver ELP process for silver-ceramic composite membrane fabrication", Materials and Manufacturing Processes, 32(4), 450-457, https://doi.org/10.1080/10426914.2016.1232817 [2016]

4. Kaniganti C. M., and Uppaluri R., "Efficacy of Reducing agent contacting pattern in Ag-SOEP electroless plating baths", Surface Engineering, 33, 5, 383-388, https://doi.org/10.1080/02670844.2016.1220755 [2016]

5. Amrita A., Pujari M., Uppaluri R., and Verma A., "Efficacy of Palladium solution concentration on electroless fabrication of dense metal ceramic composite membranes coupled with surfactant and sonication", Materials and Manufacturing Processes, 31, 1, 18-23, https://doi.org/10.1080/10426914.2014.973596 [2016]

6. Chandrasekhar B., Amit Kumar and Uppaluri R., "Global optimization of MSF desalination processes", Desalination, 394, 30-43, http://dx.doi.org/10.1016/j.desal.2016.04.012 [2016]

7. Rajesh Y., Uppaluri R., "Effect of surfactant and sonication on Pd(II) adsorption from synthetic electroless plating solutions using commercial activated carbon adsorbent", Desalination and Water Treatment, 57, 54, 26073-26088, DOI: 10.1080/19443994.2016.1159251 [2016]

1. Pujari M., Amrita A., Uppaluri R., and Verma A., "Combinatorial electroless plating characteristics for dense Pd-PSS composite membrane fabrication", Materials and Manufacturing Processes, 31, 1, 6-11, https://doi.org/10.1080/10426914.2014.952031 [2015]

1. Kaniganti C. M., Sriharsha E., Thorat P. and Uppaluri R., "Microfiltration of synthetic bacteria solution using low cost ceramic membranes", Separation Science and Technology, 50, 1, 121-135, https://doi.org/10.1080/01496395.2014.949772 [2014]

2. Sriharsha E., Uppaluri R., and Purkait M. K., "Crossflow microfiltration of oil-water emulsions using kaolin based low cost ceramic membranes", Desalination, 341, 61-71, https://doi.org/10.1016/j.desal.2014.02.030 [2014]

3. Sriharsha E., Uppaluri R., and Purkait M. K., "Microfiltration of oil-water emulsions using low cost ceramic membranes prepared with uniaxial dry compaction method", Ceramics International, 40, 1, Part A, 1155-1164, http://dx.doi.org/10.1016/j.ceramint.2013.06.117 [2014]

4. Amrita A., Pujari M., Uppaluri R., and Verma A., "A novel method of reducing agent contacting pattern for the fabrication of metal ceramic composite membranes using surfactant induced electroless plating", Applied Surface Science, 320, 52-59, https://doi.org/10.1016/j.apsusc.2014.09.036 [2014]

5. Amrita A., Pujari M., Uppaluri R., and Verma A., "Rate enhanced electroless fabrication of nickel-ceramic composite membranes", Surface Engineering, 31, 3, 221-225, https://doi.org/10.1179/1743294414Y.0000000368 [2014]

6. Pujari M., Amrita A., Uppaluri R., and Verma A., "Effect of Pd concentration on electroless dense Pd-PSS membrane fabrication", Surface Engineering, 31, 3, 209-213, https://doi.org/10.1179/1743294414Y.0000000360 [2014]

7. Pujari M., Amrita A., Uppaluri R., and Verma A., "Efficacy of novel electroless plating processes for dense Pd/Cr2O3/PSS membrane fabrication", Materials and Manufacturing Processes, 31, 1, 6-11, https://doi.org/10.1080/10426914.2014.880469 [2014]

8. Pujari M., Agarwal A., Uppaluri R., and Verma A., "Role of electroless nickel diffusion barrier on the combinatorial plating characteristics of dense Pd/Ni/PSS composite membranes", Applied Surface Science, 305, 658-664, https://doi.org/10.1016/j.apsusc.2014.03.156 [2014]

9. Pujari M., Agarwal A., Uppaluri R., and Verma A., "Effect of surfactant concentration and loading ratio on the electroless plating characteristics of dense Pd composite membranes", Industrial and Engineering Chemistry Research, 53, 8, 3105-3115, https://doi.org/10.1021/ie4035412 [2014]

10. Amrita A., Pujari M., Uppaluri R., and Verma A., "Efficacy of reducing agent and surfactant contacting pattern on the performance characteristics of nickel electroless plating baths coupled with and without ultrasound", Ultrasonics Sonochemistry, 21, 4, 1382-1391, https://doi.org/10.1016/j.ultsonch.2014.01.015 [2014]

11. Aeshala L. M., Verma A., and Uppaluri R., "Electrochemical conversion of CO2 to fuels: Tuning of reaction zone using suitable functional group in solid polymer electrolyte", Physical Chemistry Chemical Physics, 16, 33, 17588-17594, https://doi.org/10.1039/C4CP02389G [2014]

12. Rajesh Y., Pujari M., and Uppaluri R., "Equilibrium and Kinetic studies of Ni (II) adsorption using Pineapple and Bamboo Stem based adsorbents", Separation Science and Technology, 49, 533-544, https://doi.org/10.1080/01496395.2013.845426 [2014]

13. Amrita A., Uppaluri R., and Verma A, "Enhance practical knowledge through virtual mass transfer laboratory", Chemical Industry Digest, 63-66 [2014]

1. Sriharsha E., Uppaluri R., and Purkait M. K., "Preparation and Characterization of Low Cost Ceramic Membranes for Mosambi Juice Clarification", Desalination, 317, 32-40, https://doi.org/10.1016/j.desal.2013.02.024 [2013]

2. Vasanth D., Pugazhenthi G., and Uppaluri R., "Cross-flow Microfiltration of Oil-in-Water Emulsion using Low Cost Ceramic Membranes", Desalination, 320, 86-95, https://doi.org/10.1016/j.desal.2013.04.018 [2013]

3. D. Vasanth, G. Pugazhenthi and R. Uppaluri, "Performance of low cost ceramic microfiltration membranes for the treatment of oil-in-water emulsions", Separation Science and Technology, 48, 849-858, https://doi.org/10.1080/01496395.2012.712598 [2013]

4. Amrita A., Pujari M., Uppaluri R., and Verma A., "Optimal Electroless plating rate enhancement techniques for the fabrication of low cost dense nickel/ceramic composite membranes", Ceramics International, 40(1), Part A, 691-697, https://doi.org/10.1016/j.ceramint.2013.06.056 [2013]

5. Amrita A., Pujari M., Uppaluri R., and Verma A., "Preparation, Optimization and Characterization of Low Cost Ceramics for the Fabrication of Dense Nickel Composite Membranes", Ceramics International, 39(7), 7709-7716, https://doi.org/10.1016/j.ceramint.2013.03.024 [2013]

6. Bulasara V. K., Uppaluri R., and Purkait M. K., "Surface Engineering Characteristics of Ultrasound assisted Hypophosphite Electroless Plating baths", Surface Engineering, 29, 7, 489-494, https://doi.org/10.1179/1743294413Y.0000000151 [2013]

7. Shushil Kumar, Ashish Kalita and Uppaluri R., "Economic Feasibility Study of Sodium Carbonate and Soda Ash Production from Na2SO4", International Journal of Engineering Research and Science & Technology, 2, 1, 21-40, http://www.ijerst.com/currentissue.php [2013]

8. Prem Kumar B., Uppaluri R. and Purkait M. K., "Evaluation of surfactants for the cost effective enhanced oil recovery of Assam Crude Oil Fields", Petroleum Science and Technology, 31, 7, 755-762, https://doi.org/10.1080/10916466.2010.529553 [2013]

9. Aeshala L. M., Verma A., and Uppaluri R., "Effect of Cationic and Anionic Solid Polymer Electrolyte on Direct Electrochemical Reduction of Gaseous CO2 to Fuel", Journal of CO2 Utilization, 3-4, 49-55, https://doi.org/10.1016/j.jcou.2013.09.004 [2013]

10. Cheripally G. S., Mannava A., Kumar G., Gupta R., Saha P., Mandal B., Uppaluri R., Gumma S. and Ghoshal A. K., "Measurement and modelling of adsorption of lower hydrocarbons on activated carbon", Journal of Chemical and Engineering Data, 58, 6, 1606-1612, http://dx.doi.org/10.1021/je3013217 [2013]

1. Vasanth D., G. Pugazhenthi and Uppaluri R. , "Biomass assisted microfiltration of chromium (VI) using backer’s yeast by ceramic membrane prepared from low cost raw materials", Desalination, 285, 239-244, https://doi.org/10.1016/j.desal.2011.09.055 [2012]

2. Nandi B. K., Das B., Uppaluri R., "Clarification of Orange Juice using Ceramic Membrane and Evaluation of Fouling Mechanism", Journal of Food Process Engineering, 35, 3, 403-423, https://doi.org/10.1111/j.1745-4530.2010.00597.x [2012]

3. Nandi B. K., Uppaluri R., Purkait M. K., "Microfiltration of stable oil-in-water emulsions using Kaolin based ceramic membrane and evaluation of fouling mechanism", Desalination and Water Treatment, 22, 1-3, 133-145, https://doi.org/10.5004/dwt.2010.1658 [2012]

4. Bulasara V. K., Abhimanyu M.S., Pranav T., Uppaluri R., Purkait M. K., "Performance characteristics of nickel-ceramic composite membranes fabricated with hydrothermal mass transfer coupled electroless plating baths", Desalination, 284, 77-85, https://doi.org/10.1016/j.desal.2011.08.039 [2012]

5. Bulasara V. K., Mahesh Babu Ch. S. N., Uppaluri R., "Effect of surfactants on performance of electroless plating baths for nickel-ceramic composite membrane fabrication", Surface Engineering, 28(1), 44-48, https://doi.org/10.1179/1743294411Y.0000000035 [2012]

6. Bulasara V. K., Uppaluri R. and Purkait M. K., "Effect of Ultrasound on the performance of nickel hydrazine electroless plating baths", Materials and Manufacturing Processes, 27, 201-206, https://doi.org/10.1080/10426914.2011.566663 [2012]

7. Chopade R., Mohan V., Mayank R., Uppaluri R., Mishra S. C., "Simultaneous retrieval of parameters in a transient conduction-radiation problem using differential evolution algorithm", Numerical Heat Transfer Part A, 63(5), 373-395, https://doi.org/10.1080/10407782.2013.733179 [2012]

8. Ajith M., Das R., Uppaluri R., Mishra S. C., "Boundary heat fluxes in a square enclosure with an embedded design element", Journal of Thermo physics and Heat Transfer, 24, 4, 845-849, https://doi.org/10.2514/1.49910 [2012]

9. Amrita A., Uppaluri R. and Verma A., "LabVIEW based E-learning Portal for Virtual Mass Transfer Operations Laboratory", CSI Transactions on ICT, 1(1), 75-90, https://doi.org/10.1007/s40012-012-0007-8 [2012]

1. Nandi B. K., Uppaluri R. and Purkait M. K., "Identification of optimal membrane morphological parameters during microfiltration of mosambi juice using low cost ceramic membranes", LWT-Food science and Technology, 44, 1, 214-223, https://doi.org/10.1016/j.lwt.2010.06.026 [2011]

2. Vasanth D., Pugazhenthi G. and Uppaluri R., "Fabrication and properties of low cost ceramic microfiltration membranes for separation of oil and bacteria from its solution", Journal of Membrane Science, 379(1-2), 154-163, https://doi.org/10.1016/j.memsci.2011.05.050 [2011]

3. Vasanth D., Pugazhenthi G. and Uppaluri R., "Influence of sintering temperature on the properties of porous ceramic support prepared by uniaxial dry compaction method using low cost raw materials for membrane applications", Separation Science Technology, 46(8), 1241-1249, http://dx.doi.org/10.1080/01496395.2011.556097 [2011]

4. Bulasara V. K., Chandrasekhar O., Uppaluri R., "Effect of surface roughness and mass transfer enhancement on the performance characteristics of nickel-hypophosphite electroless plating baths for metal-ceramic composite membrane fabrication", Chemical Engineering Research and Design, 89(11), 2485-2494, https://doi.org/10.1016/j.cherd.2011.04.007 [2011]

5. Bulasara V. K., Uppaluri R., Thakuria H. and Purkait M. K., "Combinatorial performance characteristics of agitated nickel hypophosphite electroless plating baths", Journal of Material Process Technology, 211(9), 1488-1499 [2011]

6. Bulasara V. K., Uppaluri R., Thakuria H. and Purkait M. K., "Nickel-ceramic composite membranes: Optimization of hydrazine based electroless plating process parameters", Desalination, 275, 1-3, 243-251, https://doi.org/10.1016/j.desal.2011.03.009 [2011]

7. Bulasara V. K., Uppaluri R. and Purkait M. K., "Manufacture of nickel-ceramic composite membranes in agitated electroless plating baths", Materials and Manufacturing Processes, 26(6), 862-867, https://doi.org/10.1080/10426914.2011.557134 [2011]

8. Bulasara V. K., Thakuria H., Uppaluri R. and Purkait M. K., "Effect of process parameters on electroless plating and nickel-ceramic composite membrane characteristics", DEsalination, 268(1-3), 195-203, https://doi.org/10.1016/j.desal.2010.10.025 [2011]

9. Chopade R. P., Agnihotri E., Singh A. K., Kumar A., Uppaluri R., Mishra S. C. and Mahanta P., "Application of particle swarm algorithm for parameter retrieval in a transient conduction radiation problem", Numerical Heat Transfer Part A, 59, 9, 672-692, https://doi.org/10.1080/10407782.2011.572755 [2011]

10. Das R., Pavan Kumar T. B., Mishra S. C. and Uppaluri R., "An inverse analysis for parameter estimation applied to a non-fourier conduction-radiation problem.", Heat Transfer Engineering, 32, 6, 455-466, https://doi.org/10.1080/01457632.2010.506167 [2011]

11. Chattopadhyay, S. K., Singh S., Pramanik N., Niyogi U. K., Khandal R. K., Uppaluri R. and Ghoshal A. K., "Biodegradability Studies on Natural Fibers Reinforced Polypropylene Composites", Journal of Applied Polymer Science, 121, 4, 2226-2232, https://doi.org/10.1002/app.33828 [2011]

12. Bikkina P. K., Shoham and Uppaluri R., "Equilibrated Interfacial Tension Data of CO¬2-Water System at High Pressures and Moderate Temperatures", Journal of Chemical and Engineering Data, 56, 3725-3733, https://doi.org/10.1021/je200302h [2011]

1. Nandi B. K., Ajith M., Uppaluri R. and Purkait M. K., "Treatment of Oily Wastewater Using Low Cost Ceramic Membrane: Comparative Assessment of Pore Blocking and Artificial Neural Network Models", Chemical Engineering Research & Design, 88, 7, 881-892, https://doi.org/10.1016/j.cherd.2009.12.005 [2010]

2. Nandi B., B. Das, R. Uppaluri, M. K. Purkait, "Preparation and characterization of inexpensive submicron range inorganic microfiltration membranes", Membrane Water Treatment, 1, 121-137, https://doi.org/10.12989/mwt.2010.1.2.121 [2010]

3. Chattopadhyay, S. K.; Khandal R. K.; Uppaluri, R.; Ghoshal, A., "Bamboo fiber reinforced polypropylene composites and their mechanical, thermal, and morphological properties", Journal of Applied Polymer Science, 119, 3, 1619-1626, https://doi.org/10.1002/app.32826 [2010]

4. Chattopadhyay, S. K.; Khandal R. K.; Uppaluri, R.; Ghoshal, A., "Mechanical, thermal, and morphological properties of Maleic Anhydride-g-Polypropylene compatibilized and chemically modified short banana fiber reinforced polypropylene composites", Journal of Applied Polymer Science, 117, 3, 1731-1740, https://doi.org/10.1002/app.32065 [2010]

5. Bulasara V. K., Uppaluri R. and Banjara V. K., "Optimization of Crude Distillation System using Aspen Plus: Effect of Binary Feed Selection on Grass-root Design", Chemical Engineering Research and Design, 88, 2, 121-134, https://doi.org/10.1016/j.cherd.2009.08.004 [2010]

6. Ajith M., Gill B. S., Uppaluri R., "Economic feasibility of Silica and Palladium Composite Membranes for Industrial Dehydrogenation Reactions", Chemical Engineering Research & Design, 88, 8, 1088-1101, https://doi.org/10.1016/j.cherd.2010.01.013 [2010]

1. Nandi, B.., Das, B., Uppaluri, R., Purkait, M.K., "Microfiltration of Mosambi Juice using Low Cost Ceramic Membrane", Journal of Food Engineering, 95, 4, 597-605, https://doi.org/10.1016/j.jfoodeng.2009.06.024 [2009]

2. Nandi B., Uppaluri R. and Purkait M. K., "Treatment of oily waste water using low cost ceramic membrane: Flux decline mechanism and economic feasibility", Separation Science and Technology, 44, 12, 2840-2869, https://doi.org/10.1080/01496390903136004 [2009]

3. Nandi B., Uppaluri R. and Purkait M. K., "Effects of dip coating parameters on the morphology and transport properties of cellulose acetate ceramic composite membranes", Journal of Membrane Science, 330(1-2), 246-258, https://doi.org/10.1016/j.memsci.2008.12.071 [2009]

4. Moparthi A., Das R., Uppaluri R. and Mishra S. C., "Optimization of heat fluxes on the heater and the design surfaces of a radiating-conducting medium", Numerical Heat Transfer Part A, 56, 10, 846-860, https://doi.org/10.1080/10407780903423841 [2009]

5. Das R., Mishra S. C. and Uppaluri R., "Retrieval of thermal properties in a transient conduction radiation problem with variable thermal conductivity", International Journal of Heat and Mass Transfer, 52, 11-12, 2749-2758, https://doi.org/10.1016/j.ijheatmasstransfer.2008.12.009 [2009]

6. Mishra S. C., Kim M.Y., Das R., M. Ajith and R. Uppaluri, "Lattice Boltzmann method applied to the analysis of transient conduction-radiation problem in a cylindrical medium", Numerical Heat Transfer Part A, 56, 1-18, https://doi.org/10.1080/10407780903107162 [2009]

7. Chattopadhyay, S. K.; Khandal R. K.; Uppaluri, R.; Ghoshal, A., "Infuence of varying fiber lengths on mechanical, thermal, and morphological properties of MA-g-PP compatibilized and chemically modified short pineapple leaf fiber reinforced polypropylene composites", Journal of Applied Polymer Science, 113(6), 3750-3756, http://dx.doi.org/10.1002/app.30252 [2009]

8. Bulasara V. K., Uppaluri R. and Ghoshal A. K., "Revamp study of crude distillation unit heat exchanger network: Energy integration potential of delayed coking unit free hot streams", Applied Thermal Engineering, 29, 11-12, 2271-2279, https://doi.org/10.1016/j.applthermaleng.2008.11.013 [2009]

9. Das R., Mishra S.C. and Uppaluri R., "Inverse analysis applied to parameters and reconstruction of temperature field in a transient conduction-radiation heat transfer problem involving mixed boundary condition", International Communications in Heat and Mass Transfer, 37, 1, 52-57 [2009]

10. Chattopadhyay, S. K.; Khandal R. K.; Uppaluri, R. and Ghoshal, A.,, "Influence of varying fiber lengths on mechanical, thermal, and morphological properties of MA-g-PP compatibilized and chemically modified short pineapple leaf fiber reinforced polypropylene composites", Journal of Applied Polymer Science, 113, 6, 3750-3756 [2009]

11. Saurabh Dhir, Uppaluri R. and Purkait M. K., "Oxidative Hydrodesulfurization: Kinetic Modelling", Journal of Hazardous Materials, 161, 1360-1368 [2009]

1. Nandi B. K., Uppaluri R. and Purkait M.K., "Preparation and Characterization of Low Cost Ceramic Membranes for Microfiltration Applications", Applied Clay Science, 42(1-2), 102-110, https://doi.org/10.1016/j.clay.2007.12.001 [2008]

2. R. Das., S.C. Mishra and Uppaluri R., "Simultaneous reconstruction of thermal field and retrieval of parameters in a cylindrical enclosure", Numerical Heat Transfer Part A, 54, 983-998, https://doi.org/10.1080/10407780802473608 [2008]

3. R. Das, S.C. Mishra, M. Ajith and R. Uppaluri, "An Inverse Analysis of a Transient Two Dimensional Conduction-Radiation Problem Using the Lattice Boltzmann Method and the Finite Volume Method Coupled with the Genetic Algorithm", Journal of Quantitative Spectroscopy and Radiative Transfer, 109(11), 2060-2077, https://doi.org/10.1016/j.jqsrt.2008.01.011 [2008]

4. R. Das, S.C. Mishra and R. Uppaluri, "Multi-parameter estimation of in a transient conduction-radiation problem using the lattice Boltzmann method and the finite volume method coupled with the genetic algorithms", Numerical Heat Transfer, Part A, 53, 12, 1321-1338, https://doi.org/10.1080/10407780801959649 [2008]

5. Gera N., Uppaluri R., Dasu V.V. and Sen S., "Growth kinetics and production of glucose oxidase using Aspergillus niger NRRL 326", Chemical and Biochemical Engineering Quarterly, 2, 3, 315-320, https://hrcak.srce.hr/26763 [2008]

1. S. Chattopadhyay, U. Hujuri, R. Uppaluri, A. K. Ghoshal, "Effect of Maleic Anhydride Grafted Polypropylene on Mechanical and Morphological Properties of Chemically Modified Short Pineapple Leaf Fibre Reinforced Polypropylene Composites", Journal of Applied Polymer Science, 107, 3, 1507-1516, https://doi.org/10.1002/app.27156 [2007]

1. Uppaluri R., Linke P., Kokossis A.C. Smith R, "On the Simultaneous Optimization of Pressure and Network Layout for Gas Separation Membrane Systems", Journal of Membrane Science, 280, 1-2, 832-848, http://dx.doi.org/10.1016/j.memsci.2006.03.004 [2006]

1. Ramagopal V.S. Uppaluri, Linke P., Kokossis A.C., "Synthesis and Optimization of Gas Permeation Membrane Networks", Industrial and Engineering Chemistry Research, 43, 15, 4305-4322, https://doi.org/10.1021/ie030787c [2004]

1. Ramagopal Uppaluri, Robin Smith, Patrick Linke and Antonis Kokossis, "Optimal design of gas permeation membrane & membrane adsorption hybrid systems", Computer Aided Chemical Engineering, 10, 367-372, http://dx.doi.org/10.1016/S1570-7946(02)80089-X [2002]

2. Ramagopal U.V.S., Verma N., Bhattacharya P.K., "Analysis of flux decline during Ultrafiltration of Sugarcane Juice (limed) using Cross Flow cell.", The Canadian Journal of Chemical Engineering, 80, 1, 105-115, https://doi.org/10.1002/cjce.5450800111 [2002]

1. Ramagopal U.V.S., Agarwal S, De S and Bhattacharya P.K., "Ultrafiltration of sugar cane juice for recovery of sugar: analysis of flux and retention", Separation and Purification Technology, 21, 3, 247-259, https://doi.org/10.1016/S1383-5866(00)00209-4 [2001]