Publications

  1. Sarma, R., Kapil S., and Joshi, S.N. Systems and Methods for a Width-Independent Toolpath. Indian Patent number 532705, Date of grant 12/04/2024.

  1. Joshi, S.N., Dixit U.S., Mittal R.K., and Bag S., eds., 2023.Low Cost Manufacturing Technologies: Proceedings of NERC 2022, Springer Singapore. https://doi.org/10.1007/978-981-19-8452-5
  2. Joshi, S.N. and Chandra, P. eds., 2022. Advanced Micro and Nano Manufacturing Technologies. Springer Singapore. DOI: 10.1007/978-981-16-3645-5, Featured in 20 Best New Biomedical Engineering Books To Read In 2023 on CNN, Forbes and Inc - BookAuthority.org (the leading site for book recommendations) as on 01 March 2023.
  3. Narayanan, R.G., Joshi, S.N. and Dixit, U.S. eds., 2019. Advances in Computational Methods in Manufacturing: Select Papers from ICCMM 2019. Springer Singapore. DOI 10.1007/978-981-32-9072-3.
  4. Dixit, U.S., Joshi, S.N. and Davim, J.P. eds., 2018. Application of Lasers in Manufacturing. Springer Singapore. DOI 10.1007/978-981-13-0556-6.
  5. Joshi, S.N. and Dixit, U.S. eds., 2015.Lasers based Manufacturing. Springer New Delhi. https://doi.org/10.1007/978-81-322-2352-8

  1. Sinha, A. K., Mylliem, E., Singh, B. K., and Joshi, S.N., 2024. Advances in laser-based micro and nano machining technologies, Reference Module in Materials Science and Materials Engineering, Elsevier, 2024, ISBN 9780128035818, https://doi.org/10.1016/B978-0-323-96020-5.00245-4
  2. Das, S., and Joshi, S.N., 2022. Experimental Investigations into Erosion of Zinc-Coated Brass Wire Electrode During WEDM of Ti-6Al-4 V Alloy. In: Shunmugam M.S., Doloi B., Ramesh R., Prasanth A.S. (eds) Advances in Modern Machining Processes. (pp. 77-85). Springer, Singapore.
  3. Sarma, U., Joshi, S.N. and Chandra, P., 2022. Advanced Microchannel Fabrication Technologies for Bio-medical Devices. In: Joshi, S.N. and Chandra P. (eds) Advances in Micro and Nano Manufacturing Technologies. Springer.
  4. Das, S., Joshi, S.N. and Dixit U.S., 2022. Modeling and Optimization of EDM-Based Hybrid Machining Processes. In: Kuriachen B., Mathew J. and Dixit U. S. (eds) Electric Discharge Hybrid-Machining Processes: Fundamentals and Applications. CRC Press, Taylor and Francis Group https://doi.org/10.1201/9781003202301
  5. Sarma, R., Kapil, S. and Joshi, S.N., 2021. A Hybrid Slicing Method to Eliminate the Need of Support Structures in Direct Energy Deposition and Material Extrusion-Based Processes. In Bag S., Paul C. P., and Baruah (eds) Next Generation Materials and Processing Technologies (pp. 299-312). Springer, Singapore. DOI https://doi.org/10.1007/978-981-16-0182-8
  6. Sarma, U. and Joshi, S.N., 2020. Two-Dimensional Numerical Investigation on the Effect of Laser Parameters on Laser Indirect Machining of Glass. In: Biswal B., Sarkar B., Mahanta P. (eds) Advances in Mechanical Engineering (pp. 347-357). Springer, Singapore. https://doi.org/10.1007/978-981-15-0124-1_31
  7. Sarma, U. and Joshi, S.N., 2020. Effect of Laser Parameters on Laser-Induced Plasma-Assisted Ablation (LIPAA) of Glass. In: Shunmugam M., Kanthababu M. (eds) Advances in Unconventional Machining and Composites (pp. 67-76). Springer, Singapore. https://doi.org/10.1007/978-981-32-9471-4_6
  8. Das, S. and Joshi, S.N., 2020. Thermal Modeling and Simulation of Crater Generation on Wire Electrode during Wire EDM Operation. In: Shunmugam M., Kanthababu M. (eds) Advances in Simulation, Product Design and Development (pp. 121-135). Springer, Singapore. https://doi.org/10.1007/978-981-32-9487-5_10
  9. Kumar, J., Das, S. and Joshi, S.N., 2020. Three-Dimensional Numerical Modelling of Temperature Profiles on the Wire Electrode During Wire Electric Discharge Machining Process. In Biswal B., Sarkar B., Mahanta P. (eds) Advances in Mechanical Engineering (pp. 359-371). Springer, Singapore. https://doi.org/10.1007/978-981-15-0124-1_32
  10. Bolar, G. and Joshi, S.N., 2019. An Experimental Investigation on Productivity and Product Quality During Thin-Wall Machining of Aluminum Alloy 2024-T351. In Shunmugam M., Kanthababu M. (eds) Advances in Forming, Machining and Automation (pp. 385-393). Springer, Singapore. https://doi.org/10.1007/978-981-32-9417-2_31
  11. Singh, V.K. and Joshi, S.N., 2019. Computation of end-cutting-edge wear of single-point cutting tool using image processing. In Narayanan R., Joshi S., Dixit U. (eds) Advances in Computational Methods in Manufacturing (pp. 629-641). Springer, Singapore. https://doi.org/10.1007/978-981-32-9072-3_53
  12. Kant, R. and Joshi, S.N., 2019. A Numerical Investigation into the Effect of Forced Convection Cooling on the Performance of Multi-scan Laser Bending Process. In Dixit U., Joshi S., Davim J. (eds) Application of Lasers in Manufacturing (pp. 21-43). Springer, Singapore. https://doi.org/10.1007/978-981-13-0556-6_2
  13. Barkachary, B.M. and Joshi, S.N., 2019. Numerical Simulation and Experimental Validation of Nanoindentation of Silicon Using Finite Element Method. In Narayanan R., Joshi S., Dixit U. (eds) Advances in Computational Methods in Manufacturing (pp. 861-875). Springer, Singapore. https://doi.org/10.1007/978-981-32-9072-3_72
  14. Bolar, G. and Joshi, S.N., 2018. Numerical Modeling and Experimental Validation of Machining of Low-Rigidity Thin-Wall Parts. In Pande S., Dixit U. (eds) Precision Product-Process Design and Optimization (pp. 99-122). Springer, Singapore. https://doi.org/10.1007/978-981-10-8767-7_4
  15. Kant, R., Joshi, S.N. and Dixit, U.S., 2016. Research issues in the laser sheet bending process. In Davim P.J. (eds) Materials Forming and Machining (pp. 73-97). Woodhead Publishing. https://doi.org/10.1016/B978-0-85709-483-4.00004-1
  16. Kant, R., Bhuyan, P.M. and Joshi, S.N., 2015. Experimental studies on TGM and BM dominated curvilinear laser bending of aluminum alloy sheets. In Joshi S., Dixit U. (eds) Lasers Based Manufacturing (pp. 69-91). Springer, New Delhi. https://doi.org/10.1007/978-81-322-2352-8_5
  17. Singh, S.S., Joshi, S.N. and Khare, A., 2015. Laser Induced Micromachining and Preliminary Experiments on Manufacturing of Micro-channel on Mild Steel. In Joshi S., Dixit U. (eds) Lasers Based Manufacturing (pp. 179-200). Springer, New Delhi. https://doi.org/10.1007/978-81-322-2352-8_11
  18. Dixit, U.S., Joshi, S.N. and Kumar, V.H., 2012. Microbending with laser. In: Jain V.K. (eds) Micromanufacturing processes. (pp.283-303) CRC Press, Boca Raton.

  1. Sarma, R., Rajput, A.S., Kapil, S., and Joshi, S.N. 2025. Hybrid wire arc directed energy deposition and machining approach for realizing density-based functionally graded materials with enhanced strength-to-weight ratios, CIRP Journal of Manufacturing Science and Technology, 61, 139-152. [SCI, Elsevier, Impact Factor: 5.4]
  2. Goala, S., Joshi, S.N. 2025. A Radiation-Based Analytical Model for the Computation of Temperature in the Arc Column of Submerged Arc Additive Manufacturing Process, Journal of Manufacturing Science and Engineering, 147 (6), [SCI, ASME, Impact Factor: 2.9]
  3. Singh, B. K., Kapil, S., & Joshi, S.N. 2025.Thermo-flow modeling of geometry evolution considering the velocity flow fields during pulsed-laser processing, International Journal of Thermal Sciences, 209, 109511. [SCI, Elsevier, Impact Factor: 5.0]
  4. Sarma, R., Kapil, S., & Joshi, S.N. 2025. A comparative analysis of trochoidal toolpath with traditional toolpaths used in wire arc-based directed energy deposition process, Progress in Additive Manufacturing 10 (2), 1587-1604. [SCI, Springer Nature, Impact Factor: 5.4]
  5. Singh, S., Bai, M., Matthews, A., Goel, S., & Joshi, S.N. 2025. Critical raw material-free multi-principal alloy design for a net-zero future, Scientific Reports 15 (1), 3132. [SCI, Nature, Impact Factor: 3.9]
  6. Mylliem, E., Joshi, S.N. 2025. Laser-based cutting of Muga silk fabric. Journal of Micromanufacturing. doi:10.1177/25165984251319195 [Sage, SCI, Impact Factor 0.429]
  7. Sinha, A.K., Joshi, S.N. 2025. Experimental investigation into laser-based processing of basalt chip stone. Journal of Micromanufacturing. doi:10.1177/25165984251319132 [Sage, SCI, Impact Factor 0.429]
  8. Das, S., and Joshi, S.N. 2025. Prediction of crater induced failure of coated wires during wire EDM of Ti-6Al-4V alloy, Procedia CIRP, 133, 519-524. [Scopus, Science Direct, Cite Score 3.7]
  9. Singh, B.K., Kapil, S., Joshi, S.N. 2025. A Numerical study on laser micromachining of titanium alloy using nanosecond pulsed laser. Journal of Micromanufacturing. doi:10.1177/25165984251318847 [Sage, SCI, Impact Factor 0.429]
  10. Kadire, T., Das, S., & Joshi, S.N. 2025. The potential use of fibers derived from Wild Abyssinia Bananas in reinforcing polymer composites. International Journal of Materials Engineering Innovation. DOI: 10.1504/IJMATEI.2024.10063663.
  11. Singh, S., Bai, M., Matthews, A., Joshi, S.N. & Goel, S., 2024. Strain engineering: A sustainable alternative to avoid using strategic and critical raw materials in developing high-performance alloys, Materials Today Advances 24, 100538
  12. Gaikhe, V., Ranjan, A., & Joshi, S.N. 2024. Experimental Investigations into the Effect of Infill Patterns on the Microstructure and Mechanical Properties of Inconel 718 Using Laser-Directed Energy Deposition, Journal of Materials Engineering and Performance, 1-12
  13. Kadire, T., and Joshi, S.N. 2024. Effects of alkaline treatment and manufacturing process on mechanical and absorption properties of Wild Abyssinia Banana fiber reinforced epoxy composite, Materials Today: Proceedings, 98, 212–218, [Scopus, Elsevier, Cite Score: 3.2]
  14. Singh, B. K., Kapil, S., & Joshi, S.N. 2023. Numerical modeling of phase prediction and geometry evolution of micro-drilling using single pulse laser. Materials Today: Proceedings, 90, 262-266. [https://doi.org/10.1016/j.matpr.2023.07.010 [Scopus, Elsevier, Cite Score: 3.2]
  15. Sarma, R., Singh, A.K., Kapil, S., Bag, S., & Joshi, S.N. 2023. Evolution of near homogenous mechanical and microstructural properties in wire-arc based directed energy deposition of low carbon steel following trochoidal trajectory toolpath, Journal of Materials Processing Technology, 315, 117921. [SCI, Elsevier, Impact factor: 6.3] https://doi.org/10.1016/j.jmatprotec.2023.117921
  16. Das, S. and Joshi, S.N. 2023. Review of the causes of wire breakage and its mitigation during the wire electric discharge machining (wire-EDM) process. ASME Journal of Manufacturing Science and Engineering, 145(4): 040801 (18 pages) [SCI, Impact factor: 3.952]
  17. Bolar, G., Joshi, S.N. & Das, S., 2023. Sustainable thin-wall machining: holistic analysis considering the energy efficiency, productivity, and product quality. International Journal on Interactive Design and Manufacturing (IJIDeM) 17, 145–166. [SCI, Springer, Scopus Impact factor: 2.639]
  18. Devarani, N. and Joshi, S.N. 2022. Determining alloyed layer thickness in electric discharge alloying by inverse estimation of energy distribution. International Journal of Thermal Sciences, 177, p.107571. [SCI, Elsevier, Impact factor: 4.779]
  19. Sarma, U. and Joshi, S.N. 2022. Spatial and temporal thermo-physical analysis of Laser-induced plasma assisted ablation (LIPAA) of polycarbonate. Optics and Laser Technology, 150, p.107908. [SCI, Elsevier, Impact factor: 4.939]
  20. Sarma, R., Kapil, S., & Joshi, S.N. 2022. Build Strategies Based on Substrate Utilization for 3-Axis Hybrid Wire Arc Additive Manufacturing Process. Advances in Materials Science & Engineering, 2022, Article ID 4988301, 21 pages. https://doi.org/10.1155/2022/4988301 [SCI, Hindawi, Impact factor: 2.098]
  21. Sarma, R., Kapil, S., & Joshi, S.N. 2022. Development of a framework for computer aided design and manufacturing of 3 axis hybrid wire arc additive manufacturing. Materials Today: Proceedings 62 (2022): 7625-7634.
  22. Bolar, G., Adhikari, R., Nayak, S.N., & Joshi, S.N. 2022. Assessment of ignition risk in dry helical hole milling of AZ31 magnesium alloy considering the machining temperature and chip morphology. Journal of Manufacturing Processes, 77, pp.260-271. [SCI, Elsevier, Impact factor: 5.684]
  23. Mir, A., Luo, X., Llavori, I., Roy, A., Zlatanovic, D.L., Joshi, S.N. and Goel, S., 2022. Challenges and issues in continuum modelling of tribology, wear, cutting and other processes involving high-strain rate plastic deformation of metals. Journal of the Mechanical Behavior of Biomedical Materials, 130, 105185, https://doi.org/10.1016/j.jmbbm.2022.105185 [SCI, Elsevier, Impact factor: 4.042]
  24. Devarani, N. and Joshi, S.N. 2021. Electric discharge alloying of titanium and aluminium on AISI P20 mold steel. Surface and Coatings Technology, 405, p.126515. https://doi.org/10.1016/j.surfcoat.2020.126515 [SCI, Elsevier, Impact factor: 3.784]
  25. Das, S. and Joshi, S.N. 2021. Measurement and analysis of molybdenum wire erosion and deformation during wire electric discharge machining of Ti-6Al-4V alloy. Measurement, 179, p.109440. https://doi.org/10.1016/j.measurement.2021.109440 [SCI, Elsevier, Impact factor: 3.364]
  26. Mahesh, K., Philip, J.T., Joshi, S.N. & Kuriachen, B., 2021. Machinability of Inconel 718: A critical review on the impact of cutting temperatures. Materials and Manufacturing Processes, 36(7), pp.753-791. https://doi.org/10.1080/10426914.2020.1843671 [SCIE, Taylor and Francis, Impact factor: 3.046, Paper citations: 1]
  27. Sarma, U. and Joshi, S.N. 2021. Geometric and Surface Analysis of Microchannels Fabricated Using Laser-induced Plasma Assisted Ablation (LIPAA). Lasers in Engineering, 49(1-3), pp.119-143. [SCI, Old City Publishing, Science Citation Index Expanded: Journal Impact Factor 0.753]
  28. Kore, M., Sarma, U., Joshi, S.N. & Kuriachen, B., 2021. Processing Parameter Influence for Dimple Fabrication on WC Tool Inserts Using Laser Surface Texturing (LST). Lasers in Engineering, 49(1-3), pp.49-66. [SCI, Old City Publishing, Science Citation Index Expanded: Journal Impact Factor 0.753]
  29. Kant, R., Gurung, H., Sarma, U., & Joshi, S.N. 2021. Development and Analysis of Laser-assisted Bending with Moving Pre-displacement Load. Lasers in Engineering, 49(1-3), pp.21-47. [SCI, Old City Publishing, Science Citation Index Expanded: Journal Impact Factor 0.753]
  30. Singh, S.S., Khare, A., & Joshi, S.N. 2021. Thermophysical Modelling and Simulation of the Laser Processing of Polycarbonate (PC). Lasers in Engineering, 49(1-3), pp.155-178. [SCI, Old City Publishing, Science Citation Index Expanded: Journal Impact Factor 0.753]
  31. Bolar, G. and Joshi, S.N. 2021. Experimental investigation and optimization of wall deflection and material removal rate in milling thin-wall parts. Manufacturing Review, 8, p.17. https://doi.org/10.1051/mfreview/2021015 [ESCI, EDP Sciences, Scopus cite score 3.4]
  32. Barkachary, B.M. and Joshi, S.N. 2021. Numerical Computation and Analysis of Cutting Forces during Nanometric Scratching of Silicon Carbide. Journal of The Institution of Engineers (India): Series C, pp.1-10. https://doi.org/10.1007/s40032-021-00683-x [Scopus, Springer, Impact factor: 1.312]
  33. Kumar, S., Das, S., & Joshi, S.N. 2021. Finite Element Modeling of Thermal Residual Stresses generated during EDM of AISI 1018 Steel. Journal of The Institution of Engineers (India): Series C, pp.1-9. https://doi.org/10.1007/s40032-021-00695-7 [Scopus, Springer, Impact factor: 1.312]
  34. Das, S. and Joshi, S.N. 2020. Estimation of wire strength based on residual stresses induced during wire electric discharge machining. Journal of Manufacturing Processes, 53, pp.406-419. https://doi.org/10.1016/j.jmapro.2020.03.015 [SCI, Elsevier, Impact factor: 5.684, Paper citations: 6]
  35. 35. Singh, S.S., Khare, A., & Joshi, S.N. 2020. Fabrication of microchannel on polycarbonate below the laser ablation threshold by repeated scan via the second harmonic of Q-switched Nd: YAG laser. Journal of Manufacturing Processes, 55, pp.359-372. https://doi.org/10.1016/j.jmapro.2020.04.006 [SCI, Elsevier, Impact factor: 5.684, Paper citations: 3]
  36. Sarma, U. and Joshi, S.N. 2020. Machining of micro-channels on polycarbonate by using Laser-Induced Plasma Assisted Ablation (LIPAA). Optics & Laser Technology, 128, p.106257. https://doi.org/10.1016/j.optlastec.2020.106257 [SCI, Elsevier, Impact factor: 4.939, Paper citations: 4]
  37. Sarma, U. and Joshi, S.N. 2020. Numerical modelling and simulation of microchannel fabrication on polycarbonate using Laser-Induced Plasma Assisted Ablation (LIPAA). Optik, 223, p.165379. https://doi.org/10.1016/j.ijleo.2020.165379 [SCI, Elsevier, Impact factor: 2.187, Paper citations: 1]
  38. Bolar, G. and Joshi, S.N. 2020. Investigations into the influence of tool helix angle during end milling of open straight and curved thin-wall parts. International Journal of Machining and Machinability of Materials, 22(3-4), pp.212-232. https://doi.org/10.1504/IJMMM.2020.107053 [Scopus, Inderscience, Paper citations: 3]
  39. Joshi, S.N. and Bolar, G., 2020. Influence of End Mill Geometry on Milling Force and Surface Integrity While Machining Low Rigidity Parts. Journal of The Institution of Engineers (India): Series C, pp.1-9. https://doi.org/10.1007/s40032-020-00608-0 [Scopus, Springer, Impact factor: 1.312]
  40. Philip, J.T., Kumar, D., Joshi, S.N. Mathew, J., & Kuriachen, B., 2019. Monitoring of EDM parameters to develop tribo-adaptive Ti6Al4V surfaces through accretion of alloyed matrix. Industrial Lubrication and Tribology. DOI: 10.1108/ILT-07-2019-0257. [SCIE, Emerald Publishing, Impact factor: 0.798, Paper citations: 3]
  41. 41. Das, S., Raman, R.K., Devarani, N., & Joshi, S.N. 2019. Surface Alloying of Titanium Di-boride (TiB2) and Silicon Carbide (SiC) on Aluminium Al 5052 using Electric Discharge Processing. Procedia Structural Integrity, 14, pp.119-126. https://doi.org/10.1016/j.prostr.2019.05.016 [Scopus, Elsevier, CiteScore 1.4, Paper citations: 1]
  42. Bolar, G., Das, A., & Joshi, S.N. 2018. Measurement and analysis of cutting force and product surface quality during end-milling of thin-wall components. Measurement, 121, pp.190-204. https://doi.org/10.1016/j.measurement.2018.02.015 [SCI, Elsevier, Impact factor: 3.364, Paper citations: 59]
  43. Singh, S.S., Baruah, P.K., Khare, A., & Joshi, S.N. 2018. Incubation studies and the threshold for surface damage and cavity formation in the processing of polycarbonate by Nd: YAG laser. Optics & Laser Technology, 108, pp.592-601. https://doi.org/10.1016/j.optlastec.2018.07.030 [SCI, Elsevier, Impact factor: 4.939, Paper citations: 3]
  44. Singh, S.S., Baruah, P.K., Khare, A., & Joshi, S.N. 2018. Effect of laser beam conditioning on fabrication of clean micro-channel on stainless steel 316L using second harmonic of Q-switched Nd: YAG laser. Optics & Laser Technology, 99, pp.107-117. https://doi.org/10.1016/j.optlastec.2017.08.020 [SCI, Elsevier, Impact factor: 4.939, Paper citations: 16]
  45. Kant, R. and Joshi, S.N. 2018. Numerical investigations into influence of scanning path curvature on deformation behavior during curvilinear laser bending of magnesium sheets. Journal of Thermal Stresses, 41(3), pp.313-330. https://doi.org/10.1080/01495739.2017.1403298 [SCI, Taylor and Francis, Impact factor: 2.943, Paper citations: 2]
  46. Devarani, N. and Joshi, S.N. 2018. Surface alloying of Ti-6Al-4V on P20 mold steel using electric discharge processing (EDP). Materials Today: Proceedings, 5(2), pp.8523-8531. https://doi.org/10.1016/j.matpr.2017.11.549 [Scopus, Elsevier, CiteScore 1.8]
  47. Bolar, G., Mekonen, M., Das, A., and Joshi, S.N. 2018. Experimental investigation on surface quality and dimensional accuracy during curvilinear thin-wall machining. Materials Today: Proceedings, 5(2), pp.6461-6469. https://doi.org/10.1016/j.matpr.2017.12.259 [Scopus, Elsevier, CiteScore 1.8, Paper citations: 8]
  48. Bolar, G. and Joshi, S.N. 2018. Experimental Study on Surface Integrity, Dimensional Accuracy, and Micro-Hardness in Thin-Wall Machining of Aluminum Alloy. International Journal of Materials Forming and Machining Processes (IJMFMP), 5(2), pp.13-31. DOI: 10.4018/IJMFMP.2018070102. [IGI Global, Paper citations: 1]
  49. Bolar, G. and Joshi, S.N. 2017. Three-dimensional numerical modeling, simulation and experimental validation of milling of a thin-wall component. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231(5), pp.792-804. https://doi.org/10.1177/0954405416685387 [SCI, SAGE, Impact factor: 2.610, Paper citations: 26]
  50. Joshi, S.N. and Bolar, G., 2017. Three-dimensional finite element based numerical simulation of machining of thin-wall components with varying wall constraints. Journal of The Institution of Engineers (India): Series C, 98(3), pp.343-352. DOI 10.1007/s40032-016-0246-9. [Scopus, Springer, Paper citations: 18]
  51. Dutta, A., Das, A., & Joshi, S.N. 2017. Optimum process parameters for efficient and quality thin wall machining using firefly algorithm. International Journal of Additive and Subtractive Materials Manufacturing, 1(1), pp.3-22. https://doi.org/10.1504/IJASMM.2017.082964 [Inderscience, Paper citations: 7]
  52. Kant, R. and Joshi, S.N. 2016. Thermo-mechanical studies on bending mechanism, bend angle and edge effect during multi-scan laser bending of magnesium M1A alloy sheets. Journal of Manufacturing Processes, 23, pp.135-148. https://doi.org/10.1016/j.jmapro.2016.05.017 [SCI, Elsevier, Impact factor: 5.684, Paper citations: 27]
  53. Rashid, W.B., Goel, S., Davim, J.P., & Joshi, S.N. 2016. Parametric design optimization of hard turning of AISI 4340 steel (69 HRC). The International Journal of Advanced Manufacturing Technology, 82(1-4), pp.451-462. DOI 10.1007/s00170-015-7337-2. [SCIE, Springer, Impact factor: 2.633, Paper citations: 59]
  54. Prasad, A., Mahato, K., Chandra, P., Srivastava, A., Joshi, S.N. & Maurya, P.K., 2016. Bioinspired composite materials: applications in diagnostics and therapeutics. Journal of Molecular and Engineering Materials, 4(01), p.1640004. https://doi.org/10.1142/S2251237316400049 [ESCI, World scientific, Paper citations: 20]
  55. Kant, R. and Joshi, S.N. 2016. Numerical and Experimental Studies on the Laser Bending of Magnesium M1A Alloy. Lasers in Engineering, 35 (1-4), pp.39-62 [SCI, Old City Publishing, Impact factor: 0.665, Paper citations: 3]
  56. Barkachary, B. M. and Joshi, S.N. 2015. Integrated finite element method (FEM) and response surface methodology (RSM) based modeling and simulation of single point diamond turning (SPDT) of silicon. International Journal of Machining and Machinability of Materials, 17 (3/4), pp. 330-354. https://doi.org/10.1504/IJMMM.2015.071999 [Scopus, Inderscience, Paper citations: 1]
  57. Kant, R., Joshi, S.N. & Dixit, U.S., 2015. An integrated FEM-ANN model for laser bending process with inverse estimation of absorptivity. Mechanics of Advanced Materials and Modern Processes, 1(1), pp.1-12. https://doi.org/10.1186/s40759-015-0006-1 [Paper citations: 14]
  58. Dixit, U.S., Joshi, S.N. & Kant, R., 2015. Laser forming systems: a review. International Journal of Mechatronics and Manufacturing Systems, 8(3-4), pp.160-205. https://doi.org/10.1504/IJMMS.2015.073077 [Scopus, Inderscience, Paper citations: 27]
  59. Kant, R. and Joshi, S.N. 2014. Numerical modeling and experimental validation of curvilinear laser bending of magnesium alloy sheets. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 228(9), pp.1036-1047. https://doi.org/10.1177/0954405413506419 [SCI, SAGE, Impact factor: 2.610, Paper citations: 22]
  60. Kant, R. and Joshi, S.N. 2013. Finite element simulation of laser assisted bending with moving mechanical load. International Journal of Mechatronics and Manufacturing Systems, 6(4), pp.351-366. https://doi.org/10.1504/IJMMS.2013.057128 [Scopus, Inderscience, Paper citations: 21]
  61. Dixit, U.S., Joshi, S.N. & Davim, J.P., 2011. Incorporation of material behavior in modeling of metal forming and machining processes: A review. Materials & Design, 32(7), pp.3655-3670. https://doi.org/10.1016/j.matdes.2011.03.049 [SCIE, Elsevier, Imapct factor: 7.991, Paper citations: 117]
  62. Joshi, S.N. and Pande, S.S., 2011. Intelligent process modeling and optimization of die-sinking electric discharge machining. Applied Soft Computing, 11(2), pp.2743-2755. https://doi.org/10.1016/j.asoc.2010.11.005 [SCIE, Elsevier, Impact factor: 6.725, Paper citations: 146]
  63. 63. Joshi, S.N. and Pande, S.S., 2010. Thermo-physical modeling of die-sinking EDM process. Journal of Manufacturing Processes, 12(1), pp.45-56. https://doi.org/10.1016/j.jmapro.2010.02.001 [SCI, Elsevier, Impact factor: 5.684, Paper citations: 232]
  64. Joshi, S.N. and Pande, S.S., 2009. Development of an intelligent process model for EDM. The International Journal of Advanced Manufacturing Technology, 45(3), pp.300-317. https://doi.org/10.1007/s00170-009-1972-4 [SCIE, Springer, Impact factor: 3.563, Paper citations: 105]

  1. Sinha, A.K., Joshi, S.N., 2025. Morphological and Process-Parameters Correlation Analysis for Laser-Assisted Rock Drilling of Jalore Granite. In: Singh, A., Tiwari, P., Kumar, S., Kakati, A. (eds) Proceedings of 1st International Conference on Petroleum, Hydrogen and Decarbonization. ICPHD 2023. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-96-3667-9_12 .
  2. Goala, S., Joshi, S.N., 2024. An Algorithmic Framework for Optimizing Submerged Arc Additive Manufacturing Process Parameters for User-Specified Bead Width, MATEC Web of Conferences 401, 02008.
  3. Singh, B. K., Kapil, S., & Joshi, S. N., 2024., Numerical analysis of melt pool behavior during laser based micro drilling of SS-304 alloy., INCOM JU 2024, Jadavpur University, Kolkata, India Jan 5 - 6, 2024.
  4. Mylliem, E. and Joshi, S.N., 2024 Experimental investigation into laser processing of white pat silk, INCOM JU 2024, Jadavpur University, Kolkata, India Jan 5 - 6, 2024.
  5. Sinha, A. K., and Joshi, S.N. 2024. Microstructural investigation of Laser engraving of Jalore Pink Granite. INCOM JU 2024, Jadavpur University, Kolkata, India Jan 5 - 6, 2024.
  6. Kadire, T., and Joshi, S.N., 2024. Environmental Influences on Physical and Mechanical Properties of Gudro Species of Domestic Abyssinia Banana (GsDAB) Fiber Epoxy Composite INCOM JU 2024, Jadavpur University, Kolkata, India Jan 5 - 6, 2024.
  7. Sarma, R., Kapil S. and Joshi, S.N. 2023. Computer Aided Process Planning for Multi-axis deposition during Robotic Wire based Directed Energy Deposition, Metal Additive Manufacturing Conference: Industrial Perspectives in Additive Technologies, 17th -19th October, 2023, by the Austrian Society for Metallurgy and Materials (ASMM) at WKO Vienna, Austria.
  8. Goala S., and Joshi, S.N. 2023. Geometric analysis of bead in Direct Current Electrode Positive-based Submerged Arc Additive Manufacturing (SAAM) – 9th International and 30th All India Manufacturing Technology, Design, and Research Conference (AIMTDR) – IIT BHU, Varanasi, India –December 2023.
  9. Sinha, A. K., and Joshi, S.N. 2023. Process-parameter correlation analysis and microstructural investigation for laser-assisted rock drilling of Jalore Granite. ICPHD 2023, IIT Guwahati.
  10. Sinha, A. K., and Joshi, S.N. 2023. Laser-based drilling of Granite: morphological and microstructural studies. AIMTDR 2023. IIT BHU, Varanasi, Dec 2023.
  11. Sinha, A. K., and Joshi, S.N. 2023. Analysis of Laser-based Processing of Basalt chip stone, IMPULSE 2023, IIT Madras, Chennai.
  12. Kadire, T., and Joshi, S.N., 2023. Effects of Alkaline Treatment and Manufacturing Process on Mechanical and Absorption Properties of Wild Abyssinia Banana Fiber Reinforced Epoxy Composites. In the second international conference on advances in mechanical engineering and material science (ICAMEMS-2023), April 20th -22nd, 2023, Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2023.11.045 .
  13. Singh, B. K., Kapil, S., & Joshi, S.N., 2023., Numerical modeling and simulation of laser-based micro-drilling of titanium alloy. In Advances in Micro and Nano Manufacturing and Surface Engineering, ISSN 2195-4364. Springer, Singapore. https://doi.org/10.1007/978-981-19-4556-4_24 .
  14. Singh, B. K., Kapil, S., & Joshi, S.N., 2023., A numerical study on laser micromachining of titanium alloy using nanosecond pulsed laser, IMPULSE 2023, IIT Madras, Chennai, India, Dec 14 -15, 2023.
  15. Mylliem, E. and Joshi, S.N., 2023, Laser-based cutting of Muga silk, IMPULSE 2023, IIT Madras, Chennai, India, Dec 14 -15, 2023.
  16. Singh, B. K., Kapil, S., & Joshi, S.N., 2022. Numerical Modeling and Simulation of Micromachining of Biomedical Materials Using Nd: YAG Millisecond Pulse Laser. In Low-Cost Manufacturing Technologies: Proceedings of NERC 2022 (pp. 155-164). Singapore: Springer Nature Singapore. https://doi.org/10.1007/978-981-19-8452-5_13]
  17. Mylliem, E. and Joshi, S.N., 2022, CO2 laser cutting of white pat silk – A preliminary work, In Low-Cost Manufacturing Technologies: Proceedings of NERC 2022 held from May 20, 2022 - May 22, 2022 at IIT Guwahati.
  18. Kadire, T., and Joshi, S.N., 2022. A Study of Mechanical and Thermal Properties of Novel Natural Fibers Extracted from Wild Abyssinia Banana (WAB). In Low-Cost Manufacturing Technologies: Proceedings of NERC 2022 held from May 20, 2022 - May 22, 2022 at IIT Guwahati.
  19. Sinha, A. K., and Joshi, S.N. 2022. An Experimental Investigation into CO2 Laser-Based Processing of Boulder and Marble. In: Joshi, S.N., Dixit, U.S., Mittal, R.K., Bag, S. (eds) Low-Cost Manufacturing Technologies. NERC 2022. Springer, Singapore. https://doi.org/10.1007/978-981-19-8452-5_3 .
  20. Singh, B. K., Kapil, S., & Joshi, S.N., 2022. Numerical Modeling and Simulation of Micromachining of Biomedical Materials Using Nd: YAG Millisecond Pulse Laser. In Low-Cost Manufacturing Technologies: Proceedings of NERC 2022 (pp. 155-164). Singapore: Springer Nature Singapore. https://doi.org/10.1007/978-981-19-8452-5_13]
  21. Singh, B. K., Kapil, S., & Joshi, S.N., 2022., Numerical modeling of phase prediction and geometry evolution of micro-drilling using single pulse laser., in THIRD International Conference on Future Technologies in Manufacturing, Automation, Design & Energy (ICOFT MADE 2022), NIT Puducherry, Karaikal - 609 609, India Dec 14 -16, 2022.
  22. Mylliem, E. and Joshi, S.N., 2022, Experimental investigation into laser processing of pat silk, (Presented in Third International Conference on Future Technologies in Manufacturing, Automation, Design & Energy (ICOFT MADE 2022) held from December 14, 2022 – December 16, 2022 at NIT Puducherry).
  23. Sarma, R., Kapil S. and Joshi, S.N., 2022. Investigations on the Toolpath Generation for Robotic Wire Arc Additive Manufacturing”, North East Research Conclave (NERC 2022), 20th -22nd May, 2022, IIT Guwahati, India.
  24. Singh, S., Goel, S., and Joshi, S.N., 2022. Summary of Efforts in Phase Prediction of High Entropy Alloys Using Machine Learning, North-East Research Conclave: Sustainable Science and Technology, Indian Institute of Technology Guwahati, Guwahati, Assam, INDIA, May 20-22, 2022.
  25. Singh, S., Goel, S., and Joshi, S.N., 2022. Machine learning driving the development of high entropy alloys, in First UK workshop on High-Entropy Materials organized by Henry Royce Institute, Manchester M13 9PL, UK, September 9th, 2022.
  26. Mylliem, E. and Joshi, S.N., 2022. CO2 laser cutting of white pat silk – A preliminary work, North-East Research Conclave: Sustainable Science and Technology, Indian Institute of Technology Guwahati, Guwahati, Assam, INDIA, May 20-22, 2022.
  27. Sarma U. and Joshi, S.N., 2022. Microchannel Fabrication on Polycarbonate using Laser-Induced Plasma Assisted Ablation (LIPAA) with Copper Metal Target, North-East Research Conclave: Sustainable Science and Technology, Indian Institute of Technology Guwahati, Guwahati, Assam, INDIA, May 20-22, 2022 (Best paper presentation award).
  28. Singh, B.K., Kapil, S. and Joshi, S.N., 2022. Numerical modeling of phase prediction and geometry evolution of micro-drilling using single pulse laser., In 3rd International Conference on Future Technologies in Manufacturing, Automation, Design & Energy (ICOFT MADE 2022), NIT Puducherry, Karaikal - 609 609, India Dec 14-16, 2022.
  29. Singh, B. K., Kapil, S., & Joshi, S.N., 2021. Numerical modeling and simulation of laser-based micro-drilling of titanium alloy, in 8th International & 29th All India Manufacturing Technology, Design, and Research Conference (AIMTDR-2021), PSG Institute of Technology and Applied Research, Coimbatore, Tamil Nadu, INDIA, December 9-11, 2021.
  30. Sarma, R., Kapil S. and Joshi, S.N. 2020. A Hybrid Slicing Method to Eliminate the Need of Support Structures in Direct Energy Deposition and Material Extrusion-Based Processes. In Next Generation Materials and Processing Technologies: Select Proceedings of RDMPMC 2020, pp. 299-312. Springer Singapore.
  31. Das, S. and Joshi, S.N., 2020. Effect of Spark Discharges on Wire Cross Sections During Wire Electric Discharge Machining of Ti-6Al-4V Alloy. In International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering (AFTMME 2020), Society of Materials & Mechanical Engineers, December 19-20, 2020.
  32. Sarma, U. and Joshi, S.N., 2019. Computation of microchannel width during Laser-Induced Plasma Assisted Ablation of Polycarbonate. In 7th International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering (AFTMME-2019) Indian Institute of Technology Ropar, Rupnagar, Punjab, India, December 5-7, 2019.
  33. Das S. and Joshi, S.N., 2019. Causes of wire breakage during wire electric discharge machining process. In 7th International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering (AFTMME 2019), Indian Institute of Technology Ropar, Punjab, India, December 05-07, 2019.
  34. Kumar, S., Das, S. and Joshi, S.N., 2019. Thermal residual stress analysis during electrical discharge machining of AISI 1018 steel. In 7th International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering (AFTMME 2019), Indian Institute of Technology Ropar, Punjab, India, December 05-07, 2019.
  35. Sarma, U. and Joshi, S.N., 2018. Two-Dimensional Numerical Investigation on the Effect of Laser Parameters on Laser Indirect Machining of Glass. In International Conference on Recent Innovations and Developments in Mechanical Engineering (IC-RIDME-2018) National Institute of Technology Meghalaya, Shillong, Meghalaya, India, November 8-10, 2018.
  36. Kumar, J., Das, S. and Joshi, S.N., 2018. Three-dimensional numerical modeling of temperature profiles on the wire electrode during wire electric discharge machining process. In International Conference on Recent Innovations and Developments in Mechanical Engineering (IC-RIDME-2018) National Institute of Technology Meghalaya, Shillong, Meghalaya, India, November 8-10, 2018. (Best Poster Presentation award).
  37. Sarma, U. and Joshi, S.N., 2018. Effect of Laser Parameters on Laser-Induced Plasma-Assisted Ablation (LIPAA) of Glass. In 7th International & 28th All India Manufacturing Technology Design and Research Conference (AIMTDR-2018) College of Engineering Guindy, Anna University, Chennai, Tamil Nadu, India, December 13-15, 2018.
  38. Das, S. and Joshi, S.N., 2018. Thermal modeling and simulation of crater generation on wire electrode during wire EDM operation. In 7th International & 28th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2018), College of Engineering Guindy, Anna University, Chennai, Tamil Nadu, India, December 13-15, 2018.
  39. Kant, R., Bhuyan, P.M. and Joshi, S.N., 2016. December. Experimental Studies on Curvilinear Laser Bending of Thin Sheets. In Techno-Societal 2016, International Conference on Advanced Technologies for Societal Applications (pp. 539-548). Springer, Cham.
  40. Bolar, G., Das, A. and Joshi, S.N., 2016. December. Analysis of Surface Integrity and Dimensional Accuracy During Thin-Wall Machining. In Techno-Societal 2016, International Conference on Advanced Technologies for Societal Applications (pp. 681-688). Springer, Cham.
  41. Garg, S., Joshi, S.N., and Dixit, U. S., 2016. Straightening of mechanically bent aluminium 5052 sheets using friction stir processing. In 4th International Conference on Production and Industrial Engineering (CPIE - 2016), Dr B R Ambedkar National Institute of Technology, Jalandhar, India, December 19-21, 2016.
  42. Garg, S., Kant, R., Joshi, S.N. and Dixit, U.S., 2016. December. A study on straightening of bent Aluminium 5052 sheets using laser line heating. In Proceedings of 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016) College of Engineering, Pune, December 16-18, 2016 (pp. 1034 – 1038).
  43. Das, A., Salunkhe, B., Bolar, G. and Joshi, S.N., 2016. December. A comparative study on performance of approaches for machining of thin-wall components. In 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016) College of Engineering, Pune, December 16-18, 2016 (pp. 553 - 556).
  44. Kant, R. and Joshi, S.N., 2015. Experimental studies on laser bending of magnesium M1A alloys sheets. In 3rd International Conference on Laser and Plasma Applications in Materials Science, Kolkata, organized by IIT Kanpur and IIT Kharagpur, January 15-17, 2015.
  45. Bolar, G. and Joshi, S.N., 2014. December. 3D finite element modeling of thin-wall machining of aluminum 7075-T6 alloy. In 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2014) IIT Guwahati, India, December 12-14, 2014. (pp. 135 (1) - 135 (6)).
  46. Bhuyan, M., Kant, R. and Joshi, S.N., 2014. Experimental investigation on laser bending of metal sheets using parabolic irradiations. In 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR- 2014) IIT Guwahati, India, December 12-14, 2014. (pp. 708 (1) - 708 (6)).
  47. Singh, S. S., Shantakumar, Kh., Khare, A. and Joshi, S.N., 2014. Fabrication of Micro-Channels on Mild Steel Using Laser Induced Micro-Machining. In 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR- 2014) IIT Guwahati, India, December 12-14, 2014. (pp. 878(1) - 878(5)).
  48. Bolar, G., Joshi, S.N., 2014. Three-dimensional finite element modeling and simulation of curvilinear thin-wall machining of aluminum 7075-T6 alloy, In Processing and fabrication of advanced materials (PFAM XXIII) IIT Roorkee, India, December 05-07, 2014.
  49. Barkachary, B.M. and Joshi, S.N., 2014. Comparison of Johnson-Cook and Drucker-Prager material models during finite element simulation of single point diamond turning (SPDT) of silicon carbide. In 9th International conference on micro-manufacturing (ICoMM) Nanyang Technological Institute, Singapore, March 25-28, 2014.
  50. Barkachary, B.M. and Joshi, S.N., 2013. Finite element simulation of single point diamond turning (SPDT) of silicon. In Proceedings of the 8th International Conference on Precision, Micro, Meso and Nano Engineering (COPEN 2013) NIT Calicut, India, December 13-15, 2013, (pp. 1022 – 1026).
  51. Kant, R. and Joshi, S.N., 2013. Finite Element Simulation of Multi-pass Laser Bending Process with Forced Cooling. In Proceedings of the 8th International Conference on Precision, Micro, Meso and Nano Engineering (COPEN 2013) NIT Calicut, India, December 13-15, 2013, (pp. 772 – 777).
  52. Kant, R. and Joshi, S.N., 2013. Numerical simulation of multi-pass laser bending processes using finite element method. In Proceeding of 2nd International Conference on IRAM, Indore, India, December 16-18, 2013, (pp. 208 - 213).
  53. Joshi, S.N. and Kant, R., 2013. Finite Element Simulation of Laser Micro-Bending of Magnesium M1A Alloy. In Proceedings of the International Conference on Advancements In Polymeric Materials (APM-2013) CIPET Lucknow, India, March 1-3, 2013.
  54. Singh, K., Ray, A.K., Joshi, S.N. and Dixit, U.S., 2013. November. Effect of lime and graphite grease coatings on the absorptivity of mild steel sheet in line heating by CO2 laser. In National Conference on Recent Advances in Mechanical Engineering (NCRAME 2013) NERIST, Itanagar, November 8-9, 2013, (pp. 44 – 49).
  55. Kant, R., Joshi, S.N. and Dixit, U.S., 2013. Experimental Studies on Laser Bending of Magnesium M1A Alloy Sheet. In National Conference on Manufacturing: Vision for Future, MVF-2013, IIT Guwahati, October 12-13, 2013, (pp. 189-197).
  56. Kant, R., Joshi, S.N. and Dixit, U.S., 2013. State of the art and experimental investigation on edge effect in laser bending process. In National Conference on Recent Advances in Mechanical Engineering (NCRAME 2013) NERIST, Itanagar, November 8-9, 2013, (pp. 189 -197).
  57. Kant, R., Joshi, S.N. and Dixit, U.S., 2012. Finite Element Analysis of Laser Bending Process. In Asian Academic Seminar, IIT Bombay, India, December 3-8, 2012.
  58. Kant, R. and Joshi, S.N., 2012. Thermo-mechanical analysis of curvilinear laser bending of magnesium alloy sheet using finite element method. In Proceedings of 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR- 2012) Jadavpur University, India, December 14-16, 2012, (pp. 109 - 114).
  59. Kant, R. and Joshi, S.N., 2012. Numerical simulation of laser bending of magnesium alloy AZ31B using FEM. In International Deep Drawing Research Group (IDDRG 2012) IIT Bombay, India, November 25-28, 2012, (pp.736-746).
  60. Kant, R. and Joshi, S.N., 2012. Analysis of Sheet-holding Methods in Laser Bending Process using FEM. In 3rd Asian Symposium on Materials & Processing (ASMP – 2012) IIT Madras, India, August 30-31, 2012.
  61. Joshi, S.N. and Pande, S.D., 2011, May. Prediction of Thermal Residual Stresses with a Thermo‐physical Model of Electrical Discharge Machining Process. In AIP Conference Proceedings, Queen’s University, Belfast, UK, April 27-29, 2011, (Vol. 1353, No. 1, pp. 1373-1378).
  62. Yadav, V., Singh, A.K., Joshi, S.N. and Dixit, U.S., 2011, May. Comparison of the performance of lubricants in rolling based on temperature measurement. In AIP Conference Proceedings, Queen’s University, Belfast, UK, April 27-29, 2011, (Vol. 1353, No. 1, pp. 357-361).
  63. Joshi, S.N. and Pande, S. S., 2010. Development and validation of intelligent process model for die-sinking EDM, In 3th International & 24th All India Manufacturing Technology, Design and Research Conference (AIMTDR- 2010) Andhra University, Visakhapatnam, Andhra Pradesh, India, December 13-15, 2010.
  64. Joshi, S.N. and Pande, S.S., 2008. Intelligent process modeling and optimization of EDM. In 2nd International & 23rd All India Manufacturing Technology, Design and Research Conference (AIMTDR- 2008) IIT Madras, Chennai, India, December 15-17, 2008, (pp. 475 – 480).
  65. Joshi, S.N. and Pande, S.S., 2007. Integrated process modeling of EDM using FEM and ANN, In International Conference on Computer Aided Engineering (CAE 07) IIT Madras, Chennai, India, December 13-15, 2007, (pp. 552 – 559).
  66. Joshi, S.N. and Pande, S. S., 2007. Development of an intelligent process model for die-sinking EDM, In 23rd International Conference on CAD/CAM, Robotics and Factories of Future (CARs & FOF 07) Bogota, Colombia, South America, August 2007, (Vol. 2, pp. 614-619).