Core committee member, India International Science Festival (IISF) 2024 held
at IIT Guwahati. Coordinator Cultural Events at IISF 2024.
One-day workshop on “Research Opportunities in DRDO through ARMREB” on 25
November 2024 Monday at IIT Guwahati.
Cultural and Inauguration coordinator, ACMFMS 2022 - The Eighth Asian
Conference on Mechanics of Functional Materials and Structures, held at ME,
IIT Guwahati, 11-14 December 2022.
NERC core committee member North-East Research Conclave (May 2022).
Coordinator, Technical Education Quality Improvement Programme (TEQIP-III)
sponsored Faculty Training on Future Skill Technologies of IT-ITes: Two-week
training program on Robotics and Automation from 03–13 March 2020, IIT
Guwahati.
Joint organizing secretary, 2nd International Conference on Computational
Methods in Manufacturing (ICCMM 2019), 8–9 March 2019, IIT Guwahati.
Co-coordinated IIT Madras, IIT Guwahati, and Texas A&M University USA
jointly organized a two-day workshop on "Smart Manufacturing and Metrology"
from 25–26 July 2019 at IIT Madras.
Coordinator, 2 weeks–2 credits course on “Recent Advances in Ultra-precision
Machining Processes” MHRD scheme of Global Initiative of Academic Networks
(GIAN) 04–16 July 2016. The foreign faculty expert was Dr. Saurav Goel,
Associate Professor, London South Bank University UK (then he was in Queens
University Belfast UK).
Coordinator, AICTE Sponsored QIP course on "Micro-manufacturing
Technologies" (jointly with Prof. U. S. Dixit) 23–27 March 2015, IIT
Guwahati.
Organizing committee member, 12th International Conference on Vibration
Problems (ICVOP) 2015, 14–17 December 2015, IIT Guwahati.
Organizing committee member, 5th International and 26th All India
Manufacturing Technology, Design and Research Conference, (AIMTDR) 2014,
12–14 December 2014, IIT Guwahati.
Organizing committee member, National Conference on Manufacturing: Vision
for Future (MVF) 2013, 12–13 October 2013, IIT Guwahati.
Organizing committee member, 21st International Symposium on Processing and
Fabrication of Advanced Materials (PFAM) 2012, 10–13 December 2012, IIT
Guwahati.
Treasurer, 1st International Conference on Computational Methods in
Manufacturing (ICCMM) 2011, 15–16 December 2011, IIT Guwahati.
Laser-based material forming, Short-Term Training Program (STTP) on
“Next-Gen Manufacturing: Advanced Processes & Digital Integration” June
5-13, 2025, Organized by Department of Mechanical Engineering, NIT Calicut,
in association with the ASME Student Chapter.
Laser based micromachining: a case study, 5-day Hands-on Workshop on Surface
Engineering using Cold Spray and Laser Technology, IIT Ropar July 7-11,
2025.
Keynote Lecture on Laser Induced Plasma Assisted Micromachining, An
international conference on “Laser Assisted Material Processing (LAMP 2022)”
joint venture of Indian Institute of Technology Kharagpur, Birla Institute
of Technology (BIT) Mesra, and Indian National Academy of Engineering
(INAE), New Delhi, August 29-31, 2022.
Some case studies on advanced manufacturing processes, Innovative and
Inventive Problem Solving, One Week Online STTP Phase-II Sponsored by AICTE
Quality Improvement Scheme, All India Shri Shivaji Memorial Society (AISSMS)
CoE, Pune, 29 June–04 July 2021.
Some important aspects of SMART manufacturing, AICTE QIP Short Term Training
Programme on Smart Manufacturing & Metrology, IIT Madras, 22–27 February
2021.
Lasers-based bending, TEQIP-3 sponsored online short-term course on Recent
Advances in Manufacturing Science and Technology (RAMST), Dept. of Mech.
Engg., IIT Guwahati, 22–26 February 2021.
Lasers-based forming: fundamentals and research possibilities, QIP online
short-term course on Laser Matter Interaction, Dept. of Mech. Engg., IIT
Kanpur, 18–21 January 2021.
Diamond turning: an ultimate mechanical micro-machining technology, TEQIP-3
sponsored online one-week short term course on "Advanced Manufacturing
Technology" Dept. of Mech. Engg., IIT Guwahati, 21–25 December 2020.
Mechatronics for 3D Printing, TEQIP-3 sponsored online one-week short term
course on A workshop on Robotics For 3D Printing, Dept. of Mech. Engg., IIT
Guwahati, 30 November – 04 December 2020.
Micro-EDM: fundamentals and challenges, TEQIP-3 sponsored online one-week
short term course on Micromanufacturing Processes, Dept. of Mech. Engg., IIT
Guwahati, 30 November – 04 December 2020.
Experiments in Metrology, TEQIP-3 Workshop on Virtual Experiments in
Mechanical Engineering, Dept. of Mech. Engg., IIT Guwahati, 04 November
2020.
Application of AI Techniques in Manufacturing Process Simulations, AICTE
Training and Learning Academy (ATAL) sponsored one-week online FDP on
Applicatin of Artificial Intelligence and Machine Learning in Engineering
Problems, Dept. of Mech. Engg., NERIST Nirjuli, 14 – 18 September 2020.
Big data in manufacturing process simulations, IEEE & ACIC Online Faculty
Development Programme (FDP) on Mechatronics, Automation and Robotics
organized by Dept. of Mech. Engg., School of Engg., OP Jindal University,
Raigarh, 3–7 August 2020.
A note on importance of additive manufacturing in Industry 4.0
Mechatronics-based advanced product design and development, TEQIP-3
sponsored online FDP on Scientific and Technological Evolution of Additive
Manufacturing in the digital world, NIT Arunachal Pradesh in collaboration
with the Department of Mechanical Engineering, Govt. College of Technology,
Coimbatore, Tamil Nadu, 15–19 June 2020.
Advances in Micro-manufacturing, TEQIP-3 Sponsored Two-days webinar
organized by Dumka Engineering College, Dumka, Jharkhand, 30–31 May 2020.
Big DATA in Manufacturing Process Simulation, AICTE-ISTE approved one-week
course on Cognizance of Industry-4.0 towards Implementation and Security, K.
J. Somaiya College of Engineering, Vidyavihar, Mumbai, 30 December 2019–04
January 2020.
A note on automation and data handling in perspective of SMART
manufacturing, TEQIP-3: 3D printing and allied technologies, Dept. of Mech.
Engg., IIT Guwahati, January 2020.
Advanced Manufacturing Processes, TEQIP-3 Five-days webinar on "Numerical
Modelling of Advanced Manufacturing Processes" organized by the Department
of Mechanical Engineering, Jorhat Institute of Science and Technology under
the Collaborative Research Scheme project, ASTU, 17–21 November 2019.
Laser-based forming: an application of laser technology for the next
generation manufacturing, one-week FDP on Advances in Mechanical Engineering
organized by GIMT Guwahati, 27 September 2019.
Some aspects of SMART manufacturing International Workshop on Smart
Manufacturing and Metrology, IIT Madras, IIT Guwahati, and Texas A&M
University USA jointly organized a two-day workshop on "Smart Manufacturing
and Metrology" during 25–26 July 2019 at IIT Madras.
Laser-based forming: a case study on an application of laser technology for
the next generation manufacturing, A Workshop on Manufacturing for Industry
4.0 under the scheme of AKIN at Dept. of Mech. Engg., IIT Ropar, 19 July
2019.
Mechatronics for SMART manufacturing, A Workshop on Manufacturing for
Industry 4.0 under the scheme of AKIN at Dept. of Mech. Engg., IIT Ropar, 18
July 2019.
Modeling, simulation and optimization of Single point diamond turning
process Capabilities, Challenges, and Demands; 6th Diamond Turn Machining
(DTM) Workshop at CMTI, Bangalore, 12 July 2019.
Sensors and actuators in mechatronics, one-week TEQIP-3 course on
Mechatronics and Manufacturing Automation, National Institute of Technology,
Arunachal Pradesh, 29 October– 2 November 2018.
Laser an effective tool in manufacturing, one-week TEQIP-3 course on
Mechatronics and Manufacturing Automation, National Institute of Technology,
Arunachal Pradesh, 29 October–2 November 2018.
Electric discharge-based surface alloying, one-week short term course on
Material Processing and Surface Treatment, NIT Silchar, Silchar, 01–05
October 2018.
Laser-based manufacturing, one-week short term course on Material Processing
and Surface Treatment, NIT Silchar, Silchar, 01–05 October 2018.
Industry 4.0, National Productivity Week - 2018, Bongaigaon Refinery |
Indian Oil Corporation Limited (IOCL), Bongaigaon, Assam, India. 15 February
2018.
Laser forming: fundamentals and research, TEQIP-3 Lecture Series, NIT
Mizoram, 30 September 2017.
Laser forming: fundamentals and applications, Five-days TEQIP-2 sponsored
Short-Term Course on ‘Laser and its Applications organized by Motilal Nehru
National Institute of Technology Allahabad, Allahabad, 27–31 March 2017.
Improving productivity and quality of products by effective utilization of
available resources, during Techno-Societal 2016: International Conference
on Advanced Technologies for Societal Applications, organized SVERI's
College of Engineering Pandharpur, Maharashtra, 20 – 21 December 2016.
A study on straightening of bent aluminium 5052 sheets using laser line
heating, 6th International & 27th All India Manufacturing Technology, Design
and Research Conference (AIMTDR–2016), College of Engineering., Pune,
Maharashtra, India. 16–18 December 2016.
Improving productivity and quality during laser bending of magnesium alloys,
3rd International Conference on Laser and Plasma Applications in Materials
Science, Kolkata, organized by IIT Kanpur and IIT Kharagpur, 15–17 January
2015.
Comparison of Johnson-Cook and Drucker-Prager material models during finite
element simulation of single point diamond turning (SPDT) of silicon
carbide. In 9th International conference on micro-manufacturing (ICoMM)
Nanyang Technological Institute, Singapore, March 25-28, 2014.
Micro-bending of advanced materials using Lasers, International Conference
on Advancements in Polymeric Materials, APM 2013, Innovation in Materials
and Product Development was organized by Advanced Research School for
Technology and Product Simulation (ARSTPS), CIPET Lucknow, 1–3 March 2013.
Micro-bending with LASERs, A short term school on 'Micromanufacturing',
Dept. of Mech. Eng., IIT Kanpur, India, 30 September–4 October 2011.
