(1) Articles published in peer reviewed international/national journals:
1. Lubricated Interfaces Enabling Simultaneous Pulsatile and Continuous Chemical Release Modes
A Borbora, Y Xu, S Dey, X Wang, Y Yao, BB. Mandal, X Wang and Uttam Manna
Advanced Materials. (2023) (I.F. 32.086)
2. In Vitro Profiling of the Extracellular Matrix and Integrins Expressed by Human Corneal Endothelial Cells Cultured on Silk Fibroin-Based Matrices
S Hazra, S Dey, BB Mandal, C Ramachandran
ACS Biomaterials Science & Engineering 9 (5), 2438-2451. (2023) (I.F. 5.395)
3. Photocrosslinkable Silk-Based Biomaterials for Regenerative Medicine and Healthcare Applications
S Dey, C Jaiswal, S Shome, B Bhar, A Bandyopadhyay, K Manikumar , R Dadheech, BB Mandal
Regenerative Engineering and Translational Medicine, 1-21. (2022) (I.F. 0.565)
4. Silk Based Bioengineered Diaphyseal Cortical Bone Unit Enclosing An Implantable Bone Marrow Towards Atrophic Non‐union Grafting
JC Moses, S Dey, A Bandyopadhyay, M Agarwala, BB Mandal
Advanced Healthcare Materials, 2102031. (2022) (I.F. 11.092)
5. Mimicking native liver lobule microarchitecture in vitro with parenchymal and non-parenchymal cells using 3D bioprinting for drug toxicity and drug screening applications
G Janani, S Priya, S Dey, BB Mandal
ACS Applied Materials & Interfaces. (2022) (I.F. 10.383)
6. 3-(2-Hydroxyphenyl)imidazo[5, 1-a]isoquinoline as Cu(II) sensor, its Cu(II) ensemble for selective detection of CN⁻ ion and biological compatibility
S Mahata, S Dey, BB Mandal, V Manivannan
Journal of Photochemistry & Photobiology, A: Chemistry. (2022) (I.F. 5.141)
7. A probe with hydrazinecarbothioamide and 1,8-naphthalimide groups for “turn-on” fluorescence detection of Hg2+ and Ag+ ions
S Mahata, S Kumar, S Dey, BB Mandal, V Manivannan
Inorganica Chimica Acta 535, 120876. (2022) (I.F. 3.118)
8. 3D printing of annulus fibrosus anatomical equivalents recapitulating angle-ply architecture for intervertebral disc replacement
BK Bhunia, S Dey, A Bandyopadhyay, BB Mandal
Applied Materials Today 23, 101031. (2021) (I.F. 8.663) (Equally Contributed)
9. Engineering Microsphere-Loaded Non-mulberry Silk-Based 3D Bioprinted Vascularized Cardiac Patches with Oxygen-Releasing and Immunomodulatory Potential
S Mehrotra, RD Singh, A Bandyopadhyay, G Janani, S Dey, BB Mandal
ACS Applied Materials & Interfaces 13 (43), 50744-50759. (2021) (I.F. 10.383)
10. Silk: A Promising Biomaterial Opening New Vistas Towards Affordable Healthcare Solutions
A Bandyopadhyay, SK Chowdhury, S Dey, JC Moses, BB Mandal
Journal of the Indian Institute of Science, 1- 43. (2019) (I.F. 2.456) (Equally Contributed)
11. Analysis of Urine as Indicators of Specific Body Conditions
S Dey, T Saha, U Narendrakumar
IOP Conference Series: Materials Science and Engineering 263 (2), 022051. (2017)
(2) Articles/Book Chapter under revision in peer reviewed international journals:
Yogendra Pratap Singh, Ashutosh Bandyopadhyay, Souradeep Dey, Nandana Bhardwaj, Biman B Mandal. Trends and Advances in Silk Based Bioprinting Towards Cartilage Regeneration. Biofabrication (2023) (I.F. 11.061)
Bibhas K Bhunia, Ashutosh Bandyopadhyay, Souradeep Dey, Biman B Mandal. Silk-hydrogel functionalized with human decellularized Wharton’s jelly extracellular matrix as a minimally invasive injectable hydrogel system for potential nucleus pulposus tissue replacement therapy. International Journal of Biological Macromolecules (2023) (I.F. 8.025).
Chitra Jaiswal, Souradeep Dey, Sayanti Shome, Gargi Mandal, Amritha K Bhat, Rupam Khatua, Animesh Mishra, Baishali Ghibhela, Eshani Das, Shruti More, Biman B. Mandal. Non-mulberry silk-based biomaterials: Biomedical applications, current status and future perspective. Silk-based Biomaterials for Tissue Engineering, Regenerative and Precision Medicine, Second Edition (2023).
Shreya Mehrotra, Souradeep Dey, Kunj Sachdeva, Sujata Mohanty and Biman B. Mandal. Deciphering the role of conductive and smart materials in cardiac tissue engineering. Journal of Materials Chemistry B (2023) (I.F. 7.571).
Nandana Bhardwaj, Souradeep Dey, Bibrita Bhar, Biman B. Mandal. Bioprinted in vitro tissue models: An emerging platform for disease modeling and developing therapeutic interventions. Progress in Biomedical Engineering. (2023).
CONFERENCE (ORAL/POSTER/VIDEO) PRESENTATIONS
Dey S, Bhat AK, Janani G, Bandyopadhyay A, Shandilya V, Gupta R and Mandal BB, “Perfusion bioreactor-based 3D printed in vitro liver model for drug screening applications”, Tissue Engineering and Regenerative Medicine International Society (TERMIS) European Chapter Meeting held in Manchester, UK on 28th - 31st March 2023 (Poster Presentation).
Dey S, Bhat AK, Janani G, Shandilya V, Gupta R and Mandal BB, “Development of microscale physiomimetic bioreactor based 3D printed in vitro liver model for high-throughput drug toxicity and drug screening applications”, International Conference on Biomaterials, Regenerative Medicine and Devices (BIO-Remedi 2022) held at IIT Guwahati, Guwahati, Assam, India on 14th – 18th Dec, 2022 (Springer In vitro models "Best Poster Award”).
Awasthi S, Dey S and Mandal BB, “3D In-vitro Liver Fibrosis Models for High Throughput Drug Screening Application”, International Conference on Biomaterials, Regenerative Medicine and Devices (BIO-Remedi 2022) held at IIT Guwahati, Guwahati, Assam, India on 14th – 18th Dec, 2022 (Poster Presentation).
Dey S, Mehra P and Mandal BB, “Recent Advances in Pre-clinical In Vitro Osteochondral Models for Osteoarthritis Therapeutics”, International Conference on Biomaterials, Regenerative Medicine and Devices (BIO-Remedi 2022) held at IIT Guwahati, Guwahati, Assam, India on 14th – 18th Dec, 2022 (Poster Presentation).
Bandyopadhyay A, Bhar B, Jaiswal C, Dey S, Shome S and Mandal BB, “Silk based 3D printing of Human Tissue Models”, North-East Research Conclave, 20th-22nd May, 2022 at IIT Guwahati (Poster Presentation) .
Dey S, Bhar B, Jaiswal C and Mandal BB, "Clinically relevant silk-based 3d printed small diameter “biotube” vascular grafts as sustainable and affordable healthcare product". Innovation and Entrepreneurship Conclave (IEC), 20th April, 2022 at IIT Guwahati (Poster presentation).
Bandyopadhyay A, Dey S, Shome S and Mandal BB, "3D Printed Silk-based Affordable Patient-specific Platelet Rich Plasma Functionalized Knee Meniscus Implants for Treatment of Knee Injuries”, Innovation and Entrepreneurship Conclave (IEC), 20th April, 2022 at IIT Guwahati (Poster presentation).
Bhar B, Singh R, Dey S, Janani G and Mandal BB, “Affordable Electronic Smart Bandage for Accelerated Wound Healing”, Innovation and Entrepreneurship Conclave (IEC), 20th April, 2022 at IIT Guwahati (Poster presentation).
Bhunia BK, Bandyopadhaya A, Dey S, Mandal BB. “Fabrication of a minimally invasive injectable nucleus pulposus equivalent bioactive silk-hydrogel functionalized with decellularized human Wharton’s jelly extracellular matrix for disc regeneration therapy”. International e-Symposium on “Smart Polymers: Applications in current scenario” (SP-ACS) 15th to 16th January 2021 on virtual platform (Poster presentation).
Bhunia BK, Dey S, Bandyopadhaya A, Mandal BB. “Silk based biomimetic 3D printed constructs with angle-ply architecture for intervertebral disc replacement. International conference on advanced material for better tomorrow (AMBT, 2021), 13th -17th July 2021, India. (Poster presentation).
Bhunia BK, Bandyopadhaya A, Dey S, Mandal BB. “Development of nucleus pulposus equivalent silk-hydrogel functionalized with decellularized human Wharton’s jelly extracellular matrix for disc regeneration therapy”. Young Scientist Conference (YSC) in India International Science Festival (IISF 2020) 22nd to 25th December 2020 on virtual platform (Oral presentation).
Janani G, Priya S, Dey S and Mandal B.B. Bioprinting of multicellular liver lobule mimetic hepatic model for predicting drug-induced liver injury, International Conference on Advanced Materials for Better Tomorrow-2021 (AMBT 2021), 13th -17th July 2021, Organized by IIT BHU, India (Oral Presentation).
Bhunia BK, Dey S, Bandyopadhaya A, Mandal BB. “Silk hydrogel functionalized with human decellularized Wharton’s jelly matrix as a minimally invasive injectable hydrogel for nucleus pulposus tissue engineering”. International conference on biomedical materials innovation 2020 (ICBMI 2020). 30th SBAOI annual meeting and 12th STERMI annual meeting, 6th -9th December, 2020, Virtual conference. (Oral presentation)
Dey S, Bandyopadhaya A, Bhunia BK, Mandal BB. “Demonstration of 3D printing” .6th National Workshop on NEMS/MEMS and Theranostics Devices (NWNTD 2020), Centre for Excellence in Research and Development of Nanoelectronics Theranostic Devices under the aegis of Centre for Nanotechnology at the Indian Institute of Technology Guwahati (IIT Guwahati) is organizing a workshop on NEMS/MEMS and Theranostic Devices from 1st December to 3rd December 2020, virtual conference. (Video presentation).
Dey S, Kumar M, Chouhan D, Gangrade A, Bhunia BK, Mehrotra S, Gupta P, Singh YP, Christakiran J, Janani G, Bandyopadhyay, “Mandal BB. “North east Silk based Healthcare Technologies”. The day-long workshop IITG Socity and Northeast India (ISANI-an Introspection) on 21st of February at the Conference Center (Poster)
Moses J. C., Dey S., G. Janani., Mandal BB. “Reconstructing the cortical bone and bone marrow niches through silk-based 3D bioprinting strategies”. 6th world congress of the Tissue Engineering and Regenerative Medicine International Society (TERMIS 2021), 31st May – 4th June 2021 in Maastricht, the Netherlands. (Abstract accepted).
Bhunia BK, Dey S, Bandyopadhaya A, Mandal BB. “Silk based biomimetic 3D printed constructs with angle-ply architecture for intervertebral disc tissue engineering”. 11th World Biomaterials Congress, 11th -16th December 2020, Glasgow, Scotland. (Abstract accepted).
Bhunia BK, Dey S, Bandyopadhaya A, Mandal BB. “Design and fabrication of 3D-printed biomimetic constructs to recapitulate form and function of annulus fibrosus tissue”. 1st Departmental retreat (Biotech Express) organized by Department of Biosciences and Bioengineering (BSBE), IIT Guwahati on 21st December 2019 (Poster).
Bhunia BK, Dey S, Bandyopadhaya A, Mandal BB. “3D Printing of Annulus Fibrosus Anatomical Equivalents Recapitulating Angle-ply Architecture for Intervertebral Disc Replacement”. Young Scientist Conference (YSC) in India International Science Festival (IISF Kolkata 2019) 5th to 8th November 2019 at Biswa Bangla Convention Center, Kolkata, West Bengal, India (Poster).
Prabhu YD, Dey S, Saha T and Abilash V.G. “In Silico Functional SNP Analysis and Interpretation of Human Genes associated with Amennorhea”. Research conclave 2018, IIT Guwahati, March 14-17, 2018 (Poster).
Dey S, Saha T and I. Manjubala. “Efficacy of Dental Ceramics on Biofilm Formation”. 15th International Conference on Science Engineering and Technology, Vellore Institute of Technology, Vellore, November 12, 2017 (Oral).
Dey S, Saha T and I. Manjubala. “Investigation of the Effects of Various Drinks on Human Enamel Surface”. 14th International Conference on Science Engineering and Technology, Vellore Institute of Technology, Vellore, April 12, 2017 (Oral).
Dey S, Saha T, Das S and Ghosh AR.. “Effective and Affordable Methods of DNA Extraction from Insects” 13th International Conference on Science Engineering and Technology, Vellore Institute of Technology, Vellore, November 12, 2016 (Oral).