Dr. Amaresh Dalal

+91-361-258-2677

amaresh@iitg.ac.in
amaresh.dalal@gmail.com
Dr. Amaresh Dalal
Current Opening
Seeking motivated PhD students/IPDFs with interests in experimental biomicrofluidics or in coding and parallelizing an in-house multiphysics CFD solver. Interested candidates may email me.

Publications

International Journals
International Conferences
Books

International Conferences

  1. Kushwaha, R., and Dalal, A., 2025, “A Compact Hybrid Battery Thermal Management System with Phase Change Material Embedded Fin Structures for Cylindrical Lithium-ion Batteries”, 8th SAENIS TTTMS International Conference on Emerging Thermal Technologies, 6-8 November, 2025, IIT Guwahati.
  2. Kushwaha, R., and Dalal, A., 2025, “Development of Hybrid Battery Thermal Management System for Li-ion Battery Pack”, ASME Summer Heat Transfer Conference (SHTC 2025), 8-10 July 2025, Westminster, Colorado, USA.
  3. Kalita, N., Muthukumar, P., and Dalal, A., 2025, Performance Investigations of Solar Dryers for Winter Drying in North-Eastern Climatic Conditions of India, Presented at International Conference on Sustainable Energy and Green Technology 2025 (GCGW-SEGT 2025), Kuala Lumpur, Malaysia, August 17-20, 2025.
  4. Kalita, N., Muthukumar, P., and Dalal, A., 2025, Performance Evaluation of Biogas, Electric Driven Hybrid and Direct Mode Solar Dryer, Presented at 9th International Conference on Environment Friendly Energies and Applications 2025 (EFEA 2025), Newcastle upon Tyne, December 4-5, 2025
  5. Parida, A., Muthukumar, P. and Dalal, A., 2025, “Design, Development and Testing on Multistage Metal Hydride Based Thermochemical H2 Compression System,”, UK and World Energy Conference (UKES 2025), 14-17th April, 2025, Sheffield, University of Sheffield.
  6. Parida, A., Sharma, P., Muthukumar, P., Thangavel, R. and Dalal, A., 2025, “Performance of Metal Hydride Composite Compacts For Hydrogen Storage And Fuel Cell Powering”, International Hydrogen Technologies Conference (IHTEC 2025), 25-28th May, 2025, Izimir , Turkey, Dokuz Eylül University.
  7. Kalita, N., Muthukumar, P., and Dalal, A., 2025, Design and performance investigation of solar dryers: Comparative study on solar tunnel and solar cabinet dryer, 2nd International Conference on Future Environment and Energy (ICFEE 2025), 7-9th March 2025, Sapporo, Japan.
  8. Parida, A., Muthukumar, P. and Dalal, A., 2025, “Design and Experimental Study on a Dual Stage Metal Hydride-Based Hydrogen Compressor Targeting Pressure up to 300 Bar”, International Conference on Advances in Sustainable Solutions for Energy Transitions (ASSET 2025), 2-4 January, 2025, IIT Guwahati.
  9. Kalita, N., Muthukumar, P., and Dalal, A., 2024, “Design and Performance Evaluation of Hybrid Mode Solar Dryer Integrated with Biogas Driven Back up Air Heater”, 16th International Conference on Sustainable Energy & Environmental Protection, 09-12 Sep, 2024, Vienna (AT).
  10. Kalita, N., Muthukumar, P., and Dalal, A., 2024, “Analysis of Convective Heat Transfer Coefficients in Biogas Driven Hybrid Solar of High Value Ayurvedic Products”, 2nd International Conference on Fluid, Thermal and Energy Systems (ICFTES’24), 6-8 June, 2024, NIT Calicut, India.
  11. Parida, A., Gray, E, Muthukumar, P. and Dalal, A., 2024, “COMSOL model of coupled desorbing and absorbing metal hydride beds”, 18th International Symposium on Metal Hydrogen Systems (MH2024), 26-31 May 2024, Saint Malo, France.
  12. Deb, R., and Dalal, A., 2024, “Droplet wetting dynamics on nanostructured surfaces induced by magnetic field”, The 77th Annual Meeting of The American Physical Society - Division of Fluid Dynamics (Fall), Salt Lake City, Utah, USA. (Oral Presentation Only)
  13. Prasad, N. K., Dalal, A., and Ghosh, S., 2023. "Assessment of The Viscoelastic Normal Stress Difference Distribution Inside Shear-Thinning Viscoelastic Drop Migrating Through Constricted Microchannel', 1st Indian Conference on Micro Nano Fluidics (ICOM 2023), 29 September - 1st October, 2023, IIT Madras, India.
  14. Deb, R., Sarma, B., and Dalal, A., 2023, "Magnetowetting dynamics of an actuating ferrofluid droplet under the influence of non-uniform magnetic field", 1st Indian Conference on Micro-Nano Fluidics - From Soft matter to bioengineering (ICOM 2023), Sep 29th- Oct 1st, 2023, IIT Madras, Chennai, India.
  15. More, A., Parida, A., Kalita, P., Muthukumar, P. and Dalal, A., 2024, “Comparative Performance Analysis of Finned and Metal Foam Metal Hydride Reactors for Efficient Heating and Cooling Operations”, International Conference on Refrigeration and Air Conditioning (NCRAC2024), 13-15 March 2024, Madras, India.
  16. Parida, A., Muthukumar, P. and Dalal, A., 2023, “Investigation of the effect of bed heterogeneities in multi-stage metal hydride hydrogen compressor: An improved numerical model”, International Conference on Advances in Renewable and Green energy Technology (ICARGET2023), 07-08 December 2023, Bilaspur, India.
  17. Parida, A., Kumar, A., Muthukumar, P. and Dalal, A., 2023, “Experimental and Numerical Studies on Metal Hydride based Embedded Cooling Tube reactor for Controlled Hydrogen Discharge”, 7th International Conference on Polygeneration (ICP2023), 26-28 July, 2023, Bali, Indonesia.
  18. Kalita N., Muthukumar P., and Dalal, A., 2023, "Performance Investigation of a Hybrid Solar Dryer Integrated with Electric Backup Heater for Chilli Drying", 7th International Conference on Polygeneration (ICP 2023), 26-28 July, 2023, Bali, Indonesia.
  19. Kumar, D., and Dalal, A., 2023, “Heat transfer and pressure drop analysis of fin-tube heat exchanger with delta winglet and shear-thinning fluid”, 14th International Conference on Computational Heat and Mass Transfer (ICCHMT2023), 04-08 September, 2023, Düsseldorf, Germany.
  20. Bhattacharjee, S., Singh, A., and Dalal, A., 2023, “Three-dimensional numerical study to identify temperature non-uniformity in air-cooled lithium-ion battery pack”, 14th International Conference on Computational Heat and Mass Transfer (ICCHMT2023), 04-08 September, 2023, Düsseldorf, Germany.
  21. Kumar, D., and Dalal, A., 2023, “A numerical study of thermohydraulic performance of a finned tube heat exchanger using an aqueous solution of carboxymethyl cellulose and rectangular winglet pair”, 17th International Heat Transfer Conference (IHTC), 14 – 18 August 2023, Cape Town, South Africa.
  22. Gond, A.K., Basu, D.N., and Dalal, A., 2022, “Heat transfer characteristics of supercritical CO2 in a tapered cylindrical annular channel”, Proceeding of the 1st World Conference on Multiphase Transportation, Conversion & Utilization of Energy MTCUE July 27-31, 2022, Xi’an, China.
  23. Gond, A.K., Basu, D.N., and Dalal, A., 2022, “Numerical investigation of heat transfer characteristics of sCO2 in a divergent tapered annular channel”, Proceedings of the 9th International and 49th National Conference on Fluid Mechanics and Fluid Power (FMFP) December 14-16, 2022, IIT Roorkee, Roorkee, Uttarakhand
  24. Sarma, B., Dalal, A., and Basu, D.N., 2022, “Candle Soot is a Low-cost Alternative for Water Repelling Surfaces?”, The 75th Annual Meeting of The American Physical Society - Division of Fluid Dynamics (Fall), Indiana Convention Center, Indianapolis, Indiana. (Oral Presentation Only)
  25. Deb, R., and Dalal, A., 2022, “Coalescence dynamics of ferrofluid droplets suspended in non-magnetic fluid medium”, The 75th Annual Meeting of The American Physical Society - Division of Fluid Dynamics (Fall), Indiana Convention Center, Indianapolis, Indiana. (Oral Presentation Only)
  26. Prasad, N.K., Dalal, A., and Ghosh, S., 2022, “Computational study on the breakup of FENE-P drop migrating through microconfinement with gradual entry and exit”, The 75th Annual Meeting of The American Physical Society - Division of Fluid Dynamics (Fall), Indiana Convention Center, Indianapolis, Indiana. (Oral Presentation Only)
  27. Das, S., Bangar, S., Dalal, A., and Tomar, G., 2022, “Effect of viscoelasticity on drop deformation in a uniform electric field”, The 75th Annual Meeting of The American Physical Society - Division of Fluid Dynamics (Fall), Indiana Convention Center, Indianapolis, Indiana. (Oral Presentation Only)
  28. Prasad, N.K., Dalal, A., and Ghosh, S.S., 2021, “Computational study of deformation of viscoelastic (Oldroyd-B) drop flowing through microchannel with sudden constriction and expansion”, Proceedings of the 26th National and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference, IIT Madras, India.
  29. Sonule, N., Das, S. K., and Dalal, A., 2021, “Electrocoalescence of a compound drop on a deep liquid pool under electric field”, Proceedings of the 26th National and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference, IIT Madras, India.
  30. Vivek, S., and Dalal, A., 2021, “Three-Dimensional Simulations of Bubble Rise in a Sinusoidal Channel”, Proceedings of the 26th National and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference, IIT Madras, India.
  31. Das, S.K, and Dalal, A., 2021, “Three Dimensional Simulation of Droplet Impact on Liquid Pool”, Proceedings of the 26th National and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference, IIT Madras, India.
  32. Deb, R., Sarma, B., and Dalal, A., 2021, “Magnetic-Field mediated nanoparticle laden droplet propulsion on a wire”, Proceedings of the 26th National and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference, IIT Madras, India.
  33. Dantla, S.R., and Dalal, A., 2021, “Development of Two-phase Electrohydrodynamic Flow Solver on Unstructured Grid”, Proceedings of the 26th National and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference, IIT Madras, India.
  34. Kumar, D., and Dalal, A., 2021, “Heat Transfer Analysis of Finned Tube Heat Exchanger with Non-Newtonian fluid and Longitudinal Vortex Generator”, Proceedings of the 26th National and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference, IIT Madras, India.
  35. Gond, A K., Basu, D.N., and Dalal, A., 2021, “Thermalhydraulic Assessment of Supercritical CO2 filled Double-cooled Channel”, Proceedings of the 26th National and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference, IIT Madras, India.
  36. Bhattacharyya, S., Dalal, A., and Natarajan, G., 2021, “Numerical Investigations of Modified Tesla Structures with Application to Mixing”, Proceedings of the 26th National and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference, IIT Madras, India.
  37. Prasad, N.K., Ghosh, S.S., and Dalal, A., 2021, “Numerical Study of Deformation of Viscoelastic Drop Migrating Through Microchannel With Sudden Constriction”, Paper No: IMECE2021-71401, Proceedings of the ASME 2021 International Mechanical Engineering Congress & Exposition, Virtual.
  38. Prasad, N.K., Shome, R., Biswas, G., Ghosh, S.S., and Dalal, A., 2020, “Transport behaviour of commercial anti-cancer drug protein-bound paclitaxel (Nanopacli) in blood capillary sized microchannel”, Paper No. FMFP2020-245, Proceedings of the 8th International and 47th National Conference on Fluid Mechanics and Fluid Power, December 9-11, 2020, Indian Institute of Technology Guwahati, India.
  39. Sarma, B, Basu, D. N., and Dalal, A., 2020, “Transient dynamics of liquid jets during droplet impingement on superhydrophobic surface”, Paper No. FMFP2020-246, Proceedings of the 8th International and 47th National Conference on Fluid Mechanics and Fluid Power, December 9-11, 2020, Indian Institute of Technology Guwahati, India.
  40. Sarma, B., Dalal, A., and Basu, D. N., 2020, “Stick-slip or Stick-break?: Stiffness Mediated Magnetowetting Dynamics of Sessile Droplets”, 73rd Annual Meeting of the APS Division of Fluid Dynamics (APSDFD), 22 - 24 November, 2020, CT. (Oral Presentation Only)
  41. Sarma, B., Kumar, S., Dalal, A., Basu, D. N., and Bandyopadhyay, D., 2020, “Electric Discharge Mediated Transient Interfacial Dynamics of a Sessile Liquid Droplet: Plethora of Hydrodynamic Features”, APS March Meeting 2020 – Bulletin of the American Physical Society, Denver, Colorado, USA. (Oral Presentation Only)
  42. Kataky, P.K., Dalal, A., Biswas, G., and Wang, C.T., 2019, “Numerical simulation of three-dimensional microbial fuel cell”, International Conference on Sustainable Energy and Green Technology, Bangkok, Thailand.
  43. Khedkar, K., Yadav, S., Ghosh, B., Dalal, A., and Natarajan, G., 2019, “Development of Coupled Steady State Solver Using Hybrid Unstructured Grids”, Paper No: IHMTC2019-CFD-605, Proceedings of the 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference, IIT Roorkee, Roorkee, India.
  44. Sarma, B., Dalal, A., and Basu, D. N., 2019, “Transient Interfacial Dynamics of Viscous Droplets Impacting on Superhydrophobic Surfaces”, Paper No: IHMTC2019-MNT-868, Proceedings of the 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference, IIT Roorkee, Roorkee, India.
  45. Sarma, B., Dalal, A., and Basu, D. N., 2019, “Altered Energy Landscape of Hydrophobic Surfaces: Role of Soot Nanoparticles”, 6th International Conference on Advanced Nanomaterial and Nanotechnology (ICANN2019), 18 - 21 December, 2019, IIT Guwahati, India.
  46. Sarma, B., Basu, D. N., and Dalal, A., 2019, “Droplets Impacting Upon Superhydrophobic Surfaces”, Fluids and Health 2019: Fluid Dynamics Disease Transmission, July 23 – August 2, 2019, Cargese, France. (Oral Presentation Only)
  47. Deka, H., Biswas, G., and Dalal, A., 2018, “Oscillation Dynamics of Falling Drops”, Paper No. FMFP2018-148, Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power, December 10-12, 2018, Indian Institute of Technology Bombay, Mumbai, India.
  48. Sarma, B., Basu, D. N., and Dalal, A., 2018, “Universal Scaling Laws in Drop-on-demand Generation from A Yarn”, Paper No. FMFP2018-467, Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power, December 10-12, 2018, Indian Institute of Technology Bombay, Mumbai, India.
  49. Shahapure, V., Sarma, B., Basu, D. N., and Dalal, A., 2018, “High Speed Imaging and Analysis of Drop Formation”, Paper No. FMFP2018-680, Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power, December 10-12, 2018, Indian Institute of Technology Bombay, Mumbai, India.
  50. Nath, B., Borthakur, M. P., Biswas, G., and Dalal, A., 2018, “Influence of Electric Field on the Dynamics of Drop Formation from Submerged Orifices”, The 71st Annual Meeting of The American Physical Society - Division of Fluid Dynamics (Fall), Atlanta, Georgia, USA. (Oral Presentation Only)
  51. Deka, H., Biswas, G., and Dalal, A., 2018, “A Coupled Level Set and Volume-of-fluid Method for Modelling Two-phase Flows”, Paper No. IC-RIDME18: 194, International Conference on Recent Innovations and Developments in Mechanical Engineering, National Institute of Technology Meghalaya, Shillong, India, November 8 – 10, 2018.
  52. Kotoky, S., Dalal, A., and Natarajan, G., 2018, “The Role of Particle Diameter on the Fluidization Behavior in a Bubbling Gas-Solid Fluidized Bed”, Paper No. IC-RIDME18: 203, International Conference on Recent Innovations and Developments in Mechanical Engineering, National Institute of Technology Meghalaya, Shillong, India, November 8 – 10, 2018.
  53. Nath, B., Borthakur, M.P., Biswas, G., and Dalal, A., 2018, “Influence of Electric Field in the Lateral Migration of a Drop Inside a Microchannel”, Paper No. IC-RIDME18: 245, International Conference on Recent Innovations and Developments in Mechanical Engineering, National Institute of Technology Meghalaya, Shillong, India, November 8 – 10, 2018.
  54. Sarma, B., Pokhrel, S., Kumar, S., Dalal, A., Bandyopadhyay, D., and Basu, D. N., 2018, “Prediction of Sauter Mean Diameter of Spray During Electric Discharge Mediated Bursting of a Droplet”, Paper No. IC-RIDME18: 251, International Conference on Recent Innovations and Developments in Mechanical Engineering, National Institute of Technology Meghalaya, Shillong, India, November 8 – 10, 2018.
  55. Parmananda, P., Dalal, A., and Natarajan, G., 2018, “Three-dimensional Analysis of Non-Boussinesq Natural Convection with Radiative Heat Transfer in a Vertical Seven Rod Bundle”, Paper No: IHTC16-23267, 16th International Heat Transfer Conference, Beijing, China.
  56. Dalal, A., Gupta, A., Gupta A., Mukherjee, P.P., 2018, “Modeling of Thermal Management in Automotive Battery Modules”, Paper No: 538, 4th International Conference on Computational Methods for Thermal Problems, Indian Institute of Science, Bangalore, India.
  57. Pandey, V., Biswas, G., and Dalal, A., 2017, “Dependence of Growth Rate, Pinch-off Velocity and Size of a Single Bubble During Film Boiling on Superheat and Gravity-level”, Paper No: IHMTC2017-13-1109, Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference, BITS-Pilani, Hyderabad, India.
  58. Thirumalaisamy, R., Parmananda, M., Dalal, A., and Natarajan, G., 2017, “Development of a Low Mach Number Solver to Study Combined Turbulent Convective-Radiative Heat Transfer”, Paper No: ASCHT-17-26, 6th Asian Symposium on Computation Heat Transfer and Fluid Flow, IIT Madras, India.
  59. Nath, B., Borthakur, M. P., Biswas, G. and Dalal, A., 2017, “Deformation of a Droplet in Constricted Microfluidic Channels at Low Reynolds number”, Paper No: ASCHT-17-128, 6th Asian Symposium on Computation Heat Transfer and Fluid Flow, IIT Madras, India.
  60. Deka, H., B., Biswas, G., and Dalal, A., 2017, “Partial coalescence of unequal sized drops”, 5th International Conference on Complex Dynamical Systems and Applications, Indian Institute of Technology Guwahati, India (Oral Presentation Only).
  61. Nath, B., Borthakur, M. P., Biswas, G. and Dalal, A., 2017, “Dynamics of Droplet Deformation in Microchannels with Symmetric and Asymmetric Constrictions”, Paper No: IMECE2017-71591, Proceedings of the ASME 2017 International Mechanical Engineering Congress & Exposition, Tampa, Florida, USA.
  62. Manik, J., Parmananda, M., Kotoky, S., Borgohain, P., Dalal, A., and Natarajan, G., 2017, “Lessons from Anupravaha: Towards a General Purpose Computational Framework on Hybrid Unstructured Meshes for Multi-Physics Applications”, Paper No. CHT-17-209, ICHMT International Symposium on Advances in Computational Heat Transfer, Napoli, Italy.
  63. Pandey, V., Biswas, G., and Dalal, A., 2017, “Growth and Departure of a Single Bubble in Nucleate Boiling Regime”, Paper No. CHT-17-218, ICHMT International Symposium on Advances in Computational Heat Transfer, Napoli, Italy.
  64. Kumar, R., Dev, K., and Dalal, A., 2016, “Numerical Study of Fluid Flow and Heat Transfer inside Sharp Edged Wavy Channel”, Paper No: 392, 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, MNIT Allahabad, India.
  65. Meshram, P., Bhardwaj, S., and Dalal, A., 2016, “Numerical Study of Two Dimensional Natural Convection Inside a Porous Square Cavity with Top Wall Sinusoidally Heated and Others Cooled”, Paper No: 325, 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, MNIT Allahabad, India.
  66. Sarma, B., Kumar, S., Dalal, A., Basu D. N., Dasmahapatra, A. K. and Bandyopadhyay, D., 2016, “Instability and Breaking of Aqueous Droplet on a Dielectric Coated Electrode”, CompFlu 2016, IIT Hyderabad, India.
  67. Dalal, A., Kulkarni, A. C., Manik, J., Natarajan, G., 2016, “A Parametric Study on the Rise of a Pair of Bubbles Using Algebraic Volume of Fluid Method: Effect of Diameter and Viscosity Ratio”, The 69th Annual Meeting of The American Physical Society - Division of Fluid Dynamics (Fall), Portland, OR, USA. (Oral Presentation Only)
  68. Dalal, A., Manik, J., Natarajan, G., 2016, “Numerical Simulation of Droplet Splashing Over Varying Thin Liquid Film”, The 69th Annual Meeting of The American Physical Society - Division of Fluid Dynamics (Fall), Portland, OR, USA. (Oral Presentation Only)
  69. Deka, H., Biswas, G. and Dalal, A., 2016, “Formation and Penetration of a Vortex Ring on Drop Coalescence”, Proceedings of the ASME 2016 International Mechanical Engineering Congress & Exposition, Phoenix, AZ, USA.
  70. Kotoky S., Dalal, A. and Natarajan, G., 2016, “Numerical Study of Effects of Particle Diameter and Particle Volume Fractions on Dispersed Gas-Particle Flows Through Vertical Channels”, 6th International Congress on Computational Mechanics and Simulation, IIT Bombay, India.
  71. Bhardwaj, S. and Dalal, A., 2016, “Three-Dimensional Deformation of a Droplet on a Square Duct Wall Considering Wetting Effects”, 6th International Congress on Computational Mechanics and Simulation, IIT Bombay, India.
  72. Borgohain P., Dalal, A., Gadgil, H., and Natarajan, G., 2016, “Numerical Modelling of Laminar Diffusion Flames Over a Hybrid Unstructured Grid”, 6th International Congress on Computational Mechanics and Simulation, IIT Bombay, India.
  73. Parmananda, M., Khan, S. and Dalal, A., 2016, “Numerical Simulation of Natural Convection With Radiative Heat Transfer in a Cavity”, 6th International Congress on Computational Mechanics and Simulation, IIT Bombay, India.
  74. Pandey, V., Biswas, G., and Dalal, A., 2016, “Saturated Film Boiling in Reduced Gravity with Applied Electric Field”, 4th International Conference on Computational Methods for Thermal Problems, Georgia Tech., USA.
  75. Parmananda, P., Dalal, A., and Natarajan, G., 2016, “A Consistent Approach for Simulating Natural Convection with Radiative Heat Transfer in Participating Media”, Paper No: RAD-16-05, Proceedings of the 8th International Symposium on Radiative Transfer, Cappadocia, Turkey.
  76. Bhardwaj, S., and Dalal, A., 2016, “Mesoscopic Analysis of Droplet Spreading Behaviour on Wetted Surface for Low Viscosity Ratio”, Paper No: MNHMT2016-6492, ASME 2016 5th Micro/Nanoscale Heat and Mass Transfer International Conference, Biopolis, Singapore.
  77. Guglani, A., Dalal, A., and Basu, S., 2015, “Three-dimensional Electrochemical Thermal Model for Li-ion Pouch Cells”, Paper No: IHMTC2015-1379, 1st ISHMT-ASTFE and 23rd National Heat and Mass Transfer Conference, ISRO, Trivandrum, India.
  78. Sathisha, H. M., and Dalal, A., 2015, “A Lumped Thermal Model for the All-vanadium Redox Flow Batteries”, Paper No: IHMTC2015-613, 1st ISHMT-ASTFE and 23rd National Heat and Mass Transfer Conference, ISRO, Trivandrum, India.
  79. Borgohain, P., Dalal, A., Gadgil, H., and Natarajan, G., 2015, “Numerical Simulation of Laminar Non-reacting Variable Density Flows Using Low Mach Number Approach on Unstructured Grids”, Paper No: F-FM-072, 68th Annual Session of Indian Institute of Chemical Engineers, IIT Guwahati, India.
  80. Kotoky, S., Dalal, A., and Natarajan, G., 2015, “Numerical Simulation of Laminar Gas Particle Flow through a Vertical Channel and Over a Backward Facing Step”, Paper No: F-FM-049, 68th Annual Session of Indian Institute of Chemical Engineers, IIT Guwahati, India.
  81. Mazumder, A., Dalal, A., Sethi, S., and Atta, A., 2015, “Numerical Studies on Axisymmetric Phase Change Problem Under Concentrated Energy Beam”, Paper No: MS-076, 68th Annual Session of Indian Institute of Chemical Engineers, IIT Guwahati, India.
  82. Bhardwaj, S., Dalal, A., and Biswas, G., “Natural Convection Flows in a Porous Nanofluid-filled Triangular Enclosure With Wavy Left Wall”, Paper No: CHT-15-259, ICHMT International Symposium on Advances in Computational Heat Transfer, May 25-29, 2015, Rutgers University, Piscataway, USA.
  83. Pandey, P., Dalal, A., Biswas, G., and Natarajan, G., “Effect of Electrohydrodynamics in Saturated Film Boiling With Varying Superheat”, CHT-15-258, ICHMT International Symposium on Advances in Computational Heat Transfer, May 25-29, 2015, Rutgers University, Piscataway, USA.
  84. Patra, S., Biswas, G., Dalal, A., and Bandyopadhyay, D., 2014, “A Computational Outlook on the Flow Patterns Generated by Moving Microorganisms inside Microchannel”, IUTAM Symposium on Advances in Computation, Modeling and Control of Transitional and Turbulent Flows, Goa, India. (Oral Presentation Only)
  85. Pandey, P., Dalal, A., and Biswas, G., “Bubble Formation in Film Boiling including Electrohydrodynamic Forces”, IUTAM Symposium on Multiphase Flows with Phase Change: Challenges and Opportunities, December 8-11, 2014, IIT Hyderabad, India.
  86. Bajpai, A., Manik, J., Parmananda, M., Dalal, A., and Natarajan, G., “Computation of Variable Density Flows on Hybrid Unstructured Grids”, Paper No: 515, 5th International and 41st National Conference on Fluid Mechanics and Fluid Power, December 12-14, 2014, IIT Kanpur, India.
  87. Das, D., and Dalal, A., “Numerical Simulation of Solidification and Melting Problems on Unstructured Grid”, Paper No: 519, 5th International and 41st National Conference on Fluid Mechanics and Fluid Power, December 12-14, 2014, IIT Kanpur, India.
  88. Dusad, S., Manik, J., and Dalal, A., “Evaluating Turbulence Model on Hybrid Unstructured Meshes for Wall Bounded Flows”, Paper No: 521, 5th International and 41st National Conference on Fluid Mechanics and Fluid Power, December 12-14, 2014, IIT Kanpur, India.
  89. Kotoky, S., Dalal, A., and Natarajan, G., “Eulerian-Eulerian Modeling of Dispersed Laminar Gas-particle Flows over an Unstructured Grid”, Paper No: 522, 5th International and 41st National Conference on Fluid Mechanics and Fluid Power, December 12-14, 2014, IIT Kanpur, India.
  90. Manik, J., Dalal, A., and Natarajan, G., “A Hybrid Grid Based Algebraic Volume of Fluid Method for Interfacial Flows”, Paper No: 524, 5th International and 41st National Conference on Fluid Mechanics and Fluid Power, December 12-14, 2014, IIT Kanpur, India.
  91. Randive, P., Bhardwaj, S., and Dalal, A., “Lattice Boltzmann Modelling of Capillarity-Induced Resonance of Blob Inside a Circular Tube”, Paper No: 526, 5th International and 41st National Conference on Fluid Mechanics and Fluid Power, December 12-14, 2014, IIT Kanpur, India.
  92. Sathisha, H. M., and Dalal, A., “3D Unsteady Numerical Simulation of All-Vanadium Redox Flow Battery”, Paper No: 528, 5th International and 41st National Conference on Fluid Mechanics and Fluid Power, December 12-14, 2014, IIT Kanpur, India.
  93. Sunil, G. N., Dalal, A., and Natarajan, G., “Computation of Flow Coupled with the Electric Field on Unstructured Grid”, Paper No: 531, 5th International and 41st National Conference on Fluid Mechanics and Fluid Power, December 12-14, 2014, IIT Kanpur, India.
  94. Bhardwaj, S., and Dalal, A., “Numerical Simulations of Natural Convection Flow in a Porous Right-angled Triangular Enclosure with Nanofluid”, Paper No: HMTC1300281, 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, December 28-31, 2013, IIT Kharagpur, India.
  95. Sathisha, H. M., and Dalal, A., “2D Transient Numerical Simulation of All-Vanadium Redox Flow Battery”, Paper No: HMTC1300282, 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, December 28-31, 2013, IIT Kharagpur, India.
  96. Rana, B. K., Dalal, A., and Biswas, G., “Effects of Different Configurations on Heat Transfer From the Annular Fin-tube Heat Exchanger Using Vortex Generators”, Paper No: HMTC1300284, 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, December 28-31, 2013, IIT Kharagpur, India.
  97. Manik, J., Parmananda, M., Dalal, A., and Natarajan, G., “Development of 3-D Navier-Stokes Solver Over a Hybrid Unstructured Grid”, Paper No: HMTC1300353, 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, December 28-31, 2013, IIT Kharagpur, India.
  98. Randive, P., and Dalal, A., “Effect of Viscosity Ratio on Droplet Dynamics”, Paper No: HMTC1300574, 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, December 28-31, 2013, IIT Kharagpur, India.
  99. Varma, N., Dulhani, J. P., Dalal, A., Sarkar, S., and Ganguly, S., “Effect of Channel Confinement of Mixed Convective Flow Past an Equilateral Triangular Cylinder”, Paper No: HMTC1300583, 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, December 28-31, 2013, IIT Kharagpur, India.
  100. Das, G., Sarkar, S., and Dalal, A., “Mixed Convective Flow and Heat Transfer Around a Semi-Circular Cylinder”, Paper No: HMTC1300586, 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, December 28-31, 2013, IIT Kharagpur, India.
  101. Das, S., Sarkar, S., and Dalal, A., “Effect of Prandtl Number on Mixed Convective Flow and Heat Transfer Past a Circular Cylinder in Cross Flow at Low Reynolds Numbers”, Paper No: HMTC1300587, 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, December 28-31, 2013, IIT Kharagpur, India.
  102. Dulhani, J. P., and Dalal, A., “Effect of Orientation and Buoyancy on Fluid Flow and Heat Transfer Characteristics Past a Square Cylinder”, Paper No: HMTC1300887, 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, December 28-31, 2013, IIT Kharagpur, India.
  103. Kar, A., Dalal, A., Basu, S., and Mukherjee, P. P., 2013, “Analysis of Two-stage Evaporation and Its Impact on the PEM Fuel Cell Performance”, Paper No: ESFuelCell2013-18116, ASME 11th Fuel Cell Science, Engineering and Technology Conference, Minneapolis, MN, USA. (Oral Presentation Only)
  104. Sathisha, H. M., and Dalal, A., “Simplified Mathematical Model to Evaluate the Performance of the All-Vanadium Redox Flow Battery”, Paper No: HT2013-17366, ASME Summer Heat Transfer Conference, July 14-19, 2013, Minneapolis, MN, USA.
  105. Randive, P., Dalal, A., and Mukherjee, P. P., “Simulation of Blob Dynamics Inside a Channel Under Acoustic Excitation”, Paper No: HT2013-17372, ASME Summer Heat Transfer Conference, July 14-19, 2013, Minneapolis, MN, USA.
  106. Rana, B. K., Dalal, A., and Biswas, G., “Flow and Heat Transfer from the Annular Fin Heat Exchanger Using Winglet Type Vortex Generators”, Paper No: HT2013-17706, ASME Summer Heat Transfer Conference, July 14-19, 2013, Minneapolis, MN, USA.
  107. Dalal, A., Ranjan, R., Murthy, J. Y., and Garimella, S. V., “Heat Transfer during Evaporation of Binary Liquids in Wick Microstructure”, Paper No: 10HMTC274, 20th National and 9th International ISHMT-ASME Heat and Mass Transfer Conference, January 4-6, 2010, IIT Bombay, Mumbai, India.
  108. Dalal, A., Eswaran V., and Biswas G.., “A Finite Volume Method for Navier-Stokes Equations on Unstructured Grid”, Paper No: 41, IISc Centenary - International Conference on advances in Mechanical Engineering, July 2-4, 2008, IISc Bangalore, India.
  109. Dalal, A., Eswaran V., and Biswas G., “Natural Convection around a Heated Square Cylinder Placed in Different Angles inside an Enclosure”, Paper No: HMTC-2008-NCH7, 19th National and 8th International ISHMT-ASME Heat and Mass Transfer Conference, January 3-5, 2008, J.N.T.U. College of Engineering, Hyderabad, India.
  110. Dalal, A., Biswas G., and Eswaran V., “Analysis of Heat Transfer and Pressure-Loss in Fin-Tube Heat Exchangers using Winglet-Type Vortex Generators”, 7th Asian CFD Conference, November 26-30, 2007, Bangalore, India.
  111. Dalal, A., and De, A. K., “Numerical Simulation of Flow past Variously Shaped Bluff Bodies”, Paper No: C003, 2nd International Congress on Computational Mechanics and Simulation, December 8-10, 2006, IIT Guwahati, India.
  112. Dalal, A., and Das, M. K., “Natural Convection in a Cavity with a Wavy Wall Heated from Below and Uniformly Cooled from the Top and Both Sides”, Paper No: G024, 18th National and 7th International ISHMT-ASME Heat and Mass Transfer Conference, January 4-6, 2006, IIT Guwahati, India.
  113. Dalal A., and Das, M. K., “Natural Convection in a Square Cavity Heated from Below and Uniformly Cooled from the Top and Both Sides”, 50th Congress of Indian Society of Theoretical and Applied Mechanics (An International Meet), December 14-17, 2005, IIT Kharagpur, India.
  114. Dalal, A., and Das, M. K., “Laminar Natural Convection inside a Wavy Enclosure Heated from Top and Uniformly Cooled from the Bottom and Both Sides”, Paper No: IMECE2005-80607, ASME International Mechanical Engineering Congress and Exposition, November 5-11, 2005, Florida, USA.
  115. Dalal, A., and Das, M. K., “Laminar Natural Convection in a Complicated Cavity with Spatially Variable Upper Wall Temperature”, Paper No: HT03-47065, ASME Summer Heat Transfer Conferences, July 21-23, 2003, Las Vegas, Nevada, USA.
  116. Dalal, A., Saha, U.K., and Sardar, P., “Aerodynamics Design of Small Scale Horizontal Axis Wind Turbine Rotor Blades”, Paper No: DA1, 2nd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 23-26 June, 2003, Victoria Falls, Zambia.