• Engineering Mechanics
• Strength of Materials
• Structural Analysis
• Computer Aided Design
• Numerical Methods
• Design of Concrete Structure
• Finite Element Analysis
• Mechanics of Composite Material
• Analysis and Design of Bridges
• Structural Dynamics
• Design of Steel structures

• Finite Element method
• Bridge Engineering
• Optimization
• Structural Control
• Health Monitoring
• Retrofitting

• GOLD MEDAL for securing 1 st position in Civil Engineering from Guwahati University in the Year 1985.
• Commendation certificate from IRC for the paper entitled “Response of Cable-Stayed bridges induced by moving vehicle” in January 2003.
• Felicitated as Eminent Engineer by Institute of Engineers India in their National Convention at Nagpur Centre in 2018.

Journals:

1. Paul, A.C., Dutta, A. and Ramakrishnan, C.V., Accurate computation of design sensitivities for dynamically loaded structures with displacement constraints, AIAA J. 34(8), pp-1670-1677 (1996).
2. Dutta, A. and Ramakrishnan, C.V., Error estimation in finite element transient dynamic analysis using modal superposition, Engg. Comput., 14(1), pp-135-158 (1997).
3. Dutta, A. and Ramakrishnan, C.V., Accurate computation of design sensitivities for structures under transient dynamic loads with constraints on stresses, Comput. & Struct., 66(4), pp-463-472 (1998).
4. Dutta, A. and Ramakrishnan, C.V., Accurate computation of design sensitivities for structures under transient dynamic loads using time marching scheme, Int. J. Num. Meth. Engng., 41, pp-977-999 (1998).
5. Mahajan, P. and Dutta, A., Adaptive calculation of contact forces under low velocity impact, Comput. & Struct.,70, pp-229-241 (1999).
6. Dutta, A. , Ramakrishnan, C.V. and Mahajan, P., Adaptive finite element analysis of structures under transient dynamic loading using modal superposition, Finite Elements in Analysis and Design, 31(4), pp-255-272 (1999).
7. Dutta, A. and Ramakrishnan, C.V., Accurate computation of design sensitivities for plates under transient dynamic loads, Engg. Comput., 17(1), pp-7-27 (2000)
8. Dutta, A., Adaptive finite element analysis of structures subjected to transient dynamic loads using time marching scheme ,Comput. & Struct., 80(27-30), pp- 2313-2319 (2002)
9. Das, A., Talukdar, S. and Dutta, A., Response of Cable-Stayed bridges induced by moving vehicle, Highway Research Bulletin, IRC, 67, pp-103-118 (2002). 
10. Dutta, A and Talukdar, S., Damage Detection in Bridges using Accurate Modal Parameters, Finite Elements in Analysis and Design, 40(3), pp-287-304 (2004).
11. Das, A., Dutta, A and Talukdar, S., Efficient Dynamic Analysis of Cable-Stayed Bridge under Vehicular Movement using Space and Time Adaptivity, Finite Elements in Analysis and Design, 40 (4), pp-407-428 (2004).
12. Mahanta, B.B., Reddy, P., Dutta, A. and Chakrabarty, D., Reliable computation of contact force in FRP composite laminates under transverse impact, Shock and Vibration,11 (2), pp 129-142 (2004)
13. Mahanta, B.B., Chakrabarty, D. and Dutta, A., Accurate prediction of delamination in FRP composite laminates resulting from transverse impact, Composites Science and Technology, 64 (15), pp 2341-2351 (2004)
14. Dhyan Jyoti Deka , G. Sandeep, D. Chakraborty and A.Dutta, Multi-objective Optimization of Laminated Composites using Finite Element Method and Genetic Algorithm, Reinforced plastics and Composites, 24 (3), pp273-285 (2005)
15. Rahul, Chakraborty D., Dutta A., Optimization of FRP Laminated Composites using Island Model Parallel Genetic Algorithm, Composite Science and Technology, 65 (13), pp 2003-2013 (2005)
16. A Srivastava, A Agarwal, D. Chakraborty A.Dutta, Control of Smart Laminated FRP Structures using Artificial Neural Network, Journal of Reinforced Plastics and Composites, 24 (13), pp-1353-1364 (2005)
17. Chand, S. and Dutta, A., Adaptive shape optimization of structures subjected to transient dynamic loads using genetic algorithms, Shock and Vibration,12 (6), pp 407-424 (2005)
18. Borsaikia A., Talukdar S. and Dutta A., Study of modal parameters and vibration signatures of notched concrete prisms, Cement in Concrete Research, 36, pp 592-598 (2006)
19. Rahul, Sandeep G., Chakraborty D. and Dutta A., Multi-objective Optimization of Hybrid Laminates Subjected to Transverse Impact , Composites Structures,70,pp-260-269 (2006).
20. Desu N.B, Deb S.K., and Dutta, Anjan, Coupled tuned mass dampers for control of coupled vibrations in asymmetric building , Journal of Structural Control Health Monitoring, 13, pp-897-916 (2006)
21. Nallasivam K., Dutta A. and Talukdar, S., Dynamic Analysis of Horizontally Curved Thin-Walled Box-Girder Bridge due to Moving Vehicle, Shock and Vibration, 14 (3), pp-229-248 (2007)
22. Desu N. B., Dutta A. and Deb, S.K., Optimal assessment and location of tuned mass dampers for seismic response control of a plan-asymmetrical building, International Journal of Structural Engineering and Mechanics, 26 (4), pp-459-477 (2007)
23. Nallasivam K., Hopeful, S., Dutta A. and Talukdar, S., Static analysis of thin-walled curved box-girder bridge , Highway Research Bulletin, IRC, 76, pp-117-127 (2007)
24. Medhi, M., Dutta, A., and Deb, S.K., Health monitoring of multi-storeyed shear building using parametric state space modeling , Smart structures and systems, 4 (1), pp-47-66 (2008) 
25. Nallasivam K., Talukdar, S. and Dutta A., Free Vibration Characteristics of Horizontally Curved Thin-Walled Box-Girder Bridge, Advances in Vibration Engineering, 7(4), pp-1-14 (2008)
26. Dutta, A.K., Dutta, A. and Deb, S.K., Design of Active controller for Quincy Bayview Bridge, Illinois, USA against seismic excitation: Part I: Model updating, Structural Control and health monitoring, 15, pp-1057-1077 (2008)
27. Dutta, A., Deb, S.K. and Dutta, A., Design of Active controller for Quincy Bayview Bridge, Illinois, USA against seismic excitation: Part II-Control implementation, Structural Control and health monitoring, 15, pp-1078-1104 (2008)
28. Kurian, S.A., Deb, S.K. and Dutta, A., Influence of structural modeling on seismic vulnerability assessment of a railway overbridge using fragility curves, Highway Research Journal, Indian Road Congress, 69(1)(2008)
29. Nallasivam,K., Talukdar, S. and Dutta, A., Fatigue life Prediction of Horizontally Curved Thin Walled Box Girder Steel Bridges, Structural Engineering and Mechanics, 28 (4), 387-410 (2008)
30. Lakshmi, G. A., Dutta, Anjan and Deb, S.K. Deb, Numerical studies of strengthening of beam-column joint under cyclic excitation using frp composites, Journal of Structural Engineering, 35 (1), 59-65 (2008)
31. Richard H Scott, Sajal K Deb and Anjan Dutta, Strain distribution in external reinforced concrete beam-column joint subjected to cyclic loading, Concrete, Concrete Society, UK, 44 (6), 57-59 (2010)
32. Arun Ch. Borsaikia, Anjan Dutta and S. K. Deb, System identification of multistoreyed non standard shear building using parametric state space modeling, Structural Control and health monitoring ,  18 (4), 471-480(2011)
33. N. Debnath, A. Dutta and S.K. Deb, Placement of sensors in operational modal analysis for truss bridges, Mechanical system and signal processing, 31, 196-216 (2012)
34. A.M.Choudhury, P.Poluraju, A.Dutta and S.K.Deb,  Effective retrofitting of plain concrete elements using externally bonded fibre reinforced polymer, Journal of Structural Engineering, 39 (6),(2013).
35. Comingstarful Marthong, Anjan Dutta and Sajal K. Deb, Seismic rehabilitation of RC exterior beam-column connections using epoxy resin injection, Journal of Earthquake Engineering, 17 (3), 378-398 (2013)
36. Rupam Jyoti Nath, Sajal Kanti Deb and Anjan Dutta, Base isolated RC building – performance evaluation and numerical model updating using recorded earthquake response, Earthquakes and Structures, 4 (5), 471-487 (2013)
37. A.M.Choudhury, S.K.Deb and A.Dutta, Study on size effect of FRP retrofitted RC beam-column connections under cyclic loading, Canadian Journal of Civil Engineering 40 (4), 353-360 (2013)
38. N. Debnath, S.K. Deb, A. Dutta, Frequency band wise passive control of linear time invariant structural systems with H∞ optimization, Journal of Sound and Vibration. 332, (23), 6044-6062 (2013)
39. Animesh Das, Anjan Dutta and S.K. Deb, Performance of fiber-reinforced elastomeric base isolators under cyclic excitation, Structural Control and health monitoring, 22, 197–220 (2015)
40. Dhaval Kheni, Richard H. Scott, S.K. Deb and Anjan Dutta, “Ductility enhancement in beam-column connections under cyclic load using HyFRC”, ACI Structural Journal, 112(2), 167-178 (2015).
41. Nirmalendu Debnath, S. K. Deb and Anjan Dutta, “Multi-modal vibration control of truss bridges with tuned mass dampers under general loading”,  Journal of Vibration and Control, 22(20), 4121-4144 (2015).
42. Samim Mustafa, N. Debnath and Anjan Dutta, “Bayesian probabilistic approach for model updating and damage detection for a large truss bridge”, International Journal of Steel Structures, 15(2), 473-485 (2015).
43. Comingstarful Marthong, Anjan Dutta ands Sajal K. Deb, “Study on size effect of RC and Rehabilitated exterior beam-column connections under cyclic loading”, published on line in European Journal of Environmental and Civil Engineering,20, pp. 586–610 (2016).
44. Animesh Das, Sajal Kanti Deb  and Anjan Dutta, “Shake Table Testing of Un-reinforced Brick Masonry Building Test Model Isolated by U-FREI”, Journal of earthquake Engng. & Structural Dynamics, 45 (2), 253-273 (2016).
45. Animesh Das, Sajal Kanti Deb  and Anjan Dutta, “Comparison of Numerical and Experimental Seismic Responses of FREI Supported Un-reinforced Brick Masonry Model Building”, Journal of earthquake Engng., 20(8), 1239-1262, 2016.
46. C. Marthong, A. Dutta and S. K. Deb, “Effect of Cyclic Loading Frequency on the Behaviour of RC Beam-Column Connections, Journal of earthquake Engng. 20(7), 1126-1147 (2016).
47. C.Marthong, S.K.Deb and A.Dutta, Experimental Fragility Functions for Exterior Deficient RC Beam-Column Connections before and after Rehabilitation, Earthquakes and Structures, 10(4), 1291-1314(2016).
48. C.Marthong, S.K.Deb and A.Dutta, Effect of loading rate on the behaviour of  epoxy repaired RC beam-column connection, European Journal of Environmental and Civil Engineering,  DOI:10.1080/19648189.2016.1248790.
49. N. Debnatha, A. Dutta, S.K. Deb,"Multi-Modal Passive-Vibration Control of Bridges under General Loading-Condition", Procedia Engineering 144, 264 – 273 (2016).
50. Biswajit Pal, Anjan Dutta, “Seismic response analysis of Train-Track-Bridge Interaction System to evaluate running safety of train in case of high-speed railways”, Bridge and Structural Engng. Journal (ING-IABSE),46(2), pp.12-22 (2016).
51. Thuyet Van Ngo, Anjan Dutta and Sajal K. Deb, Evaluation of horizontal stiffness of fibre reinforced elastomeric isolators, Earthquake Engng. & Structural Dynamics, DOI: 10.1002/eqe.2879 (2017).
52. Diptojit Datta and Anjan Dutta, “A comparative study of the black-box and gray-box models of subspace identification for support-excited structures”, Structural Monitoring and Maintenance, 4(4), 2017.
53. Thuyet Van Ngo, Sajal Kanti Deb and Anjan Dutta, Effect of horizontal loading direction on performance of prototype square unbonded fibre reinforced elastomeric isolator, accepted in Journal of Structural Control and Health Monitoring.
54. Needhi Kotoky, Sajal K Deb and Anjan Dutta, Experimental studies on HyFRC bridge piers with different detailings at pier-foundation interface, Journal of Bridge Engineering, ASCE, 23(6), 2018. 
55. Thuyet Van Ngo, Sajal Kanti Deb and  Anjan Dutta , Vulnerability assessment of a low-rise un-reinforced masonry building supported on un-bonded fibre reinforced elastomeric isolators, Journal of Performance of Constructed Facilities, ASCE, 32 (2), 2018.

56. N Kotoky, A Dutta and S K Deb, “Comparative Assessment of use of HyFRC on seismic fragility of highway bridge using experimental observed damage data and calibrated analytical model”, Bulletin of Earthquake Engineering,  17:2281–2306, 2019.

57. K. Nath, A. Dutta, B. Hazra, "An iterative polynomial chaos approach towards stochastic structural analysis with non-Gaussian randomness", International Journal for Numerical Methods in Engineering, 119 (11): 1126-1160, 2019.
58. Needhi Kotoky , Anjan Dutta  and Sajal K Deb,Hybrid Testing for evaluation of Seismic performance of highway bridge with pier made of HyFRC, Structures, 20, 2019. 
59. K. Nath, A. Dutta, B. Hazra, "An iterative polynomial chaos approach for solution of structural mechanics problem with Gaussian material property", Journal of Computational Physics, 390: 425-451, 2019.

60. Thuyet Van Ngo, Anjan Dutta and Sajal K. Deb, "Predicting stability of a prototype un-bonded fiber reinforced elastomeric isolator by finite element analysis", International Journal of Computational Methods, 17(10), 2020

61. Kamaljyoti Nath, Anjan Duttay, Budhaditya Hazra, "Dynamic analysis of structural system with random material properties using time dependent polynomial chaos", accepted in Journal of Computational Physics. 
62. Needhi Kotoky, Anjan Dutta and Sajal K Deb, "MECHANICAL PROPERTIES OF HYBRID FIBRE REINFORCED CONCRETE WITH STEEL AND POLYPROPYLENE FIBRES", accepted in Indian Concrete Journal.

63. A. Lego, A. Dutta and S.K. Deb, "Seismic Response Control of Integral Abutment Bridge using Sleeved Pile", under review in Soil Dynamics and Earthquake Engineering.

64. Loying  Prinza  Priya, Dutta Anjan, "Progressive collapse analysis of Reinforced Concrete structure and its resisting mechanisms" , under review in Structure and Infrastructure Engineering.
65. Kamaljyoti Nath, Anjan Duttay, Budhaditya Hazra, "AN ADAPTIVE SCHEME FOR RANDOM FIELD DISCRETIZATION USING KL EXPANSION", under review in Journal of Engineering with Computers.
66. Arun Chandra Borsaikia, Anjan Dutta and Sajal K. Deb, "Evaluation of participation of masonry infill walls in the linear and nonlinear behaviour of RC buildings with open ground storey ", under review in Structural Monitoring and Maintenance.
67. Kamaljyoti Nath, Anjan Duttay, Budhaditya Hazra, "A Polynomial Dimensional Decomposition-Iterative Polynomial Chaos approach towards solution of structural mechanics problems with random material properties", under review in Journal of Probalistic Engineering Mechanics.

International Conferences :

1. Dutta, A. and Paul, A.C., Adaptive shape optimization of structures under transient dynamic loads. In C.D. proceedings of International Conference on Theoretical, applied, Computational and Experimental Mechanics held in IIT, KGP in Dec’98, Paper no. 069.
2. Dutta, A. and Choudhury, P.L., A comparative study of different stress recovery techniques in the convergence of discretization errors for dynamically loaded structures. In C.D. proceedings of International Conference on Theoretical, applied, Computational and Experimental Mechanics held in IIT, KGP in Dec’98, Paper no. 070.
3. Dutta, A. and Subramanya, G., Nonlinear static analysis of Cable-Stayed bridges up to failure load. In the proceedings of International Conference on Suspension, Cable supported and Cable-Stayed Bridges held in Nov. `99 at Hyderabad .
4. Ramakrishnan , C.V., Gupta, S. and Dutta, A., Automated three dimensional delaunay triangulation of domains with curved boundary surfaces. In the proceedings of European Congress on Computational Methods in Applied Sciences and Engineering ECCOMAS 2000 held in Barcelona, 11-14 September 2000.
5. Dutta, A., Accurate linear dynamic analysis of structures using space and time adaptivity. In the proceedings of the Fifth International Conference on Computational Structures Technology held in Leuven, Belgium, 6-8 September 2000 pp-111-115
6. Dutta, A. and Talukdar, S., Diagnostic procedure for bridge damages using improved vibration technique in the Proceedings of ICCE 2001 at IISC, Bangalore held in July 2001.
7. Gupta, S. and Dutta, A., Finite elements, genetic algorithms and b-splines: a combined technique for shape optimization in the Proceedings of International conference on DAMS 2003 held at Coimbatore from January 6-8, 2003.
8. Dutta, A., Adaptive shape optimization of structure using genetic algorithms in the Proceedings of WCSMO5 held at Lido di Jesolo, Italy, 19-23 May, 2003.
9. Dutta, A., Study of Delamination of FRP Composites under Low Velocity Impact using Adaptive Finite Element Method in Russian Indian Workshop on High Performance Computing in Science and Technology (HPC SE 2003) held from 16-20, 2003 in Moscow.
10. N. Prashanth, Anjan Dutta and V. Chandramouli, Estimation of stage-discharge in river flow using 2D finite element, in International Conference on Environmental Fluid Mechanics ’05 (ICEFM’05) held on March 3-5 2005.
11. Dutta , Anjan, Deb, S.K and Desu, N.B., Optimal design of bi-directional tuned mass dampers for seismic response control of asymmetrical building, in 9th World Seminar on Seismic Isolation, Energy Dissipation and Active Vibration Control of Structures, Kobe, Japan held on June 13-16, 2005.
12. Sajal Kanti Deb, Anjan Dutta, Nagendra Babu Desu, Optimal design of coupled tuned mass dampers for seismic response control of asymmetric building, in 9th World Seminar on Seismic Isolation, Energy Dissipation and Active Vibration Control of Structures, Kobe, Japan held on June 13-16, 2005. 
13. P.Dharma Teja Reddy , Rahul Ratakonda and Anjan Dutta, Multi-objective optimization of a large span roof truss, in SEC 2005, IISC Bangalore held on 14-16 December, 2005.
14. Dutta, A., Deb, S.K. and Medhi, M., , Parametric system identification technique for damage detection of multistoreyed shear building in First European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland held on 3-8 September 2006.
15. Sriramamurthy, I and Dutta, A., Shape Optimization of Plate Under Transient Dynamic Loads in 2nd International congress on Computational mechanics and simulation held in IIT Guwahati from 8-10 December, 2006.
16. Dutta, A.K., Dutta, A. and Deb, S.K., Active control of a cable-stayed bridge against earthquake excitation in 2nd International congress on Computational mechanics and simulation held in IIT Guwahati from 8-10 December, 2006.
17. Rahul, Chakraborty D. and Dutta A. , Island Model Parallel Genetic Algorithm for Optimization of Symmetric FRP Laminated Composites, in the proceedings of 13th IEEE International Conference on High Performance Computing (HiPC 2006), held in Bangalore during December 18-21, 2006.
18. K. Suresh, Sajal K. Deb and Anjan Dutta, Parametric system identification of multistoreyed buildings with non-uniform mass and stiffness distribution, in the proceedings of 14th WCEE, held in Beijing during October 12-17, 2008, Paper ID: 05-01-0053.
19. Dutta,A.K., Deb, S.K., and Dutta A., Design of active controller for Bill Emerson Memorial Bridge, USA against seismic excitation using updated numerical model, in the proceedings of 14th WCEE, held in Beijing during October 12-17, 2008, Paper ID: 14-0286.
20. Debnath N., Deb, S.K., and Dutta A., Robust design of TMD for seismic response control of asymmetric soft storey buildings, in the proceedings of 14th WCEE, held in Beijing during October 12-17, 2008, Paper ID: 05-01-0045.
21. Choudhury A.M., Dutta A. and Deb S.K., Comparative study of full scale beam-column joints under cyclic loading”, in the proceedings of 3rd International Earthquake Symposium, Dhaka, March 5-6, 2010.
22. Arun Ch. Borsaikia, Anjan Dutta, and S.K.Deb, Identification of influence of infill walls on lateral stiffness of rc framed structure, in the proceedings of 5th International Civil Engineering Conference (CECAR5) together with the Australasian Structural Engineering Conference (ASEC 2010), Sydney, August 8-12, 2010.                            
23. Kamal Kumar, Anjan Dutta and S.K. Deb, Multiple crack identification in a beam using genetic algorithm, in the proceedings of The Tenth International Conferenceon Computational Structures Technology, Valencia, Spain, September 14-17, 2010.          
24. C.Marthong, S.K.deb and A.Dutta, Performance of rehabilitated RC beam-column sub-assemblage under cyclic loading, in the 36th Conference on OUR WORLD IN CONCRETE & STRUCTURES, Singapore, August 14-16, 2011.
25. Kheni Dhaval Govindbhai, S.K. Deb, Anjan Dutta, Studies on Toughness of Hybrid Fibre-Reinforced Cementitious Composite Beam, in the International Conference on Structural Engineering Construction and Management 2011 at Kandy, Sri Lanka, 15-17 December, 2011
26. Animesh Das, Anjan Dutta and S.K. Deb, MODELING OF FIBER-REINFORCED ELASTOMERIC BASE ISOLATORS in the proceedings of 15th World Congress in Earthquake Engineering held in Lisbon, Portugal, 24-28 September, 2012. (Paper ID 1854)
27. N. Debnath, S.K. Deb & A. Dutta, System Identification of the Saraighat Bridge using Ambient Vibration Data: A Case Study in the proceedings of 15th World Congress in Earthquake Engineering held in Lisbon, Portugal, 24-28 September, 2012. (Paper ID 1842)
28. Samim Mustafa and Anjan Dutta, Bayesian probabilistic approach for model updating and damage detection in the proceedings of VEESD 2013 held in Vienna , Austria, 28-30 August, 2013.
29. Sumit Gupta and Anjan Dutta, Comparative study on damage identification techniques using limited static and dynamic responses in the proceedings of International Conference in Computer Aided Engineering (CAE-2013) held in IIT Madras, India
30. Needhi Kotoky, Anjan Dutta and Sajal Kanti Deb, Hybrid Simulation of Structural System in 15th Symposium on Earthquake Engineering, Indian Institute of Technology, Roorkee, December 11-13, 2014
31. Prodip K. Paul, Anjan Dutta, and Sajal K. Deb, “System identification and damage detection of r.c. structure” in the proceedings of  5th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering at Crete Island, Greece, 25–27 May 2015 
32. N. Debnath, A. Dutta and S.K. Deb, “Multi-Modal Passive-Vibration Control of Bridges Under General Loading-Condition”, accepted in ICOVP 2015, 12th International Conference on Vibration Problems, December 14-17, 2015, IIT Guwahati, India.
33. Anjan Dutta and Biswajit Pal, Investigation of trian-track-bridge interaction system in high speed railways, accepted in CECAR7 at Honolulu, Hawaii, USA, 30th August-2nd September, 2016
34. Thuyet Van Ngo, Anjan Dutta and Sajal K. Deb, Predicting stability of a prototype un-bonded fibre-reinforced elastomeric isolator by finite element analysis,in ICCM2016, Berkeley,CA, USA, August 1st-4th, 2016.
35. Thuyet Van Ngo, S. K. Deb, A. Dutta, N. Ray and A. J. Mitra, Performance evaluation of fiber reinforced elastomeric isolators under cyclic load,in 8th World Congress on Joints, Bearing and Seismic Systems for Concrete Structures, Atlanta, Georgia, September 25-29, 2016. 
36. Needhi Kotoky, Anjan Dutta and Sajal Kanti Deb, Experimental investigation of the behavior of HyFRC bridge piers for improved seismic performance, in SEC 2016 at SERC Madras. 
37. Diptojit Datta, Anjan Dutta, STRUCTURAL HEALTH MONITORING USING IMPROVED SUBSPACE IDENTIFICATION METHOD BY INCLUDING ROTATIONAL DEGREES OF FREEDOM, in International Conference on Vibration Problems, November 29-December 2, 2017, IIT Guwahati, India. 
38. Biswajit Pal, Anjan Dutta, Comparative study among different vehicle models in case of high-speed railways and its experimental validation, in International Conference on Vibration Problems, November 29-December 2, 2017, IIT Guwahati, India.
39. M. Sarmah, S.K. Deb and A. Dutta, " Seismic rehabilitation of bridge pier using Fe-SMA: A Review", CESDOC 2018, 2nd International Conference on Sustainability, 18-19 December, 2018, Guwahati, Assam
40. Thuyet V. Ngo, Sajal K. Deb and Anjan Dutta, "EFFECT OF SHEAR MODULUS AND SHAPE FACTOR ON THE PERFORMANCE OF PROTOTYPE UN-BONDED FIBRE REINFORCED ELASTOMERIC ISOLATORS", in  The Seventh International Conference on Structural Engineering, Mechanics and Computation,  2-4 September, 2019, Cape Town, South Africa. 
41. Arpita Ghosh and Anjan Dutta, "Numerical investigation for evaluation of seismic performance of SMA confined structural elements", 7th International Congress on Computational Mechnics and Simulation, 11-13 December, 2019, IIT Mandi.

National Conferences :

1. Dutta, A., Satish, T. and Rajeev, M., Refinement strategy in adaptive finite element method. In the proceedings of ISTAM 98 held in Dec’98 at Coimbatore, pp- 59-64.
2. Dutta, A. and Dhar, N.G., Accurate estimation of stress concentration factor using adaptive finite element method. . In the proceedings of ISTAM 98 held in Dec’99 at Warangal, pp- 130-135.
3. Talukdar, S. and Dutta, A., Damage identification in bridges using vibration technique. In the proceedings of National Seminar on Problems Associated with Bridge Construction and Maintenance held in July, 2000 at Guwahati by Indian Institute of Bridge Engineers, pp-15-20
4. Nallasivam, K, Talukdar, S and Dutta, A., An approximate solution for the natural frequencies of curved bridge girder considering gravitational and centrifugal effects of moving load in SEC2003 held in IIT Kharagpur from 12-14 December, 2003, pp. 272-279.
5. A. Ch. Borsaikia, A. Dutta and S. Talukdar, Evaluation of characteristics of damaged structure by experimental and theoretical study in SEC2003 held in IIT Kharagpur from 12-14 December, 2003, pp. 191-199.
6. K.Nallasivam, S.Hopeful, Anjan Dutta and S.Talukdar, "Static Analysis of Horizontally Curved Thin-Walled Box-Girder Bridge”, Indian Road Congress, 68th Annual Session, November 2007.
7. Rupam Nath, S.K. Deb and Anjan Dutta, “Validation of Numerical Model of Prototype Base Isolated RC Building using Recorded Earthquake Response”,26th National Convention of Civil Engineers held in, 9-10 October, 2010 at Guwahati.

8. N Kotoky, A Dutta and S Kanti Deb, “Enhancement of seismic performance of structures using HyFRC”, Proceedings of Thirty-third National Convention of Civil Engineers on ‘Recent Advances in Structural Engineering", Institute of Engineers, Ahmedabad, 2017

BOOK CHAPTERS

1. Rahul, Chakraborty, D., Dutta, A., 2006. Island model parallel genetic algorithm for optimization of symmetric FRP laminated composites. in: Robert, Y., Parashar, M., Badrinath, R., Prasanna, V.K. (Eds.), High Performance Computing, Lecture Notes in Computer Science, vol. 4297. Springer-Verlag, Berlin-Heidelberg, Germany, pp. 217-228.

Title of the invention: "Elastomeric Seismic Isolation with High Damping Capacity and Manufacturing Method Thereof."  Application No. 201631021115 A, 20/06/2016.