Return to Main Page
Proceedings of the
5th International and 26th All India
Manufacturing Technology, Design and Research Conference

Advanced Manufacturing - II - Laser Based Manufacturing
Return to List of Papers

A Simple Analytical Model of Laser Bending Process

E. Aideh, U. S. Dixit and R. Echempati

Mathematical Formulation for the Development of Compound Curve Surface by Laser Line Heating

Biplab Das and Pankaj Biswas

Effect of Process Parameters on Thermal History Of Laser Welding of AISI-304 Stainless Steel

Rakesh Bhadra, Pankaj Biswa and M. Ravi Sankar

A Literature Review on CO2 Laser Welding

Rakesh Bhadra, Pankaj Biswas and M. Ravi Sankar

A 3-D Finite Element Analysis Of Transient Temperature Profile Of Laser Welded Ti-6Al-4V Alloy

Chandan kumar, Manas Das and Pankaj Biswas

Nd:YAG Laser Micro-drilling of SiC-30BN : Experimental Study and Process Optimization

Roy. N., Kuar. A. S., Mitra, S and Acherjee, B

Experimental Studies on Fibre Laser Micro-Machining of Ti-6Al-4V

A. Sen, B. Doloi and B.Bhattacharyya

Effect of Different Surface Coatings on Laser Forming of Mild Steel Sheets

Sunil K. Singh, Sachin S. Gautam and Uday S. Dixit

Numerical Investigation and Statistical Analysis of Laser Bending of Titanium Sheets

K. Paramasivan, Sandip Das, Dipten Misra and M. Sundar

Effect of Pulsed Nd:YAG Laser Parameters in Preplaced TiC Coating on Aluminium Substrate

Chinmaya Kumar Sahoo, Jageshwar Kumar Sahu and Manoj Masanta

Comparative Study of Surface Roughness Criteria During Pulsed Nd:YAG Laser Micro-Turning of Alumina Ceramic at Laser Focused and Defocused Conditions

G. Kibria, B. Doloi and B. Bhattacharyya

Study and Analysis of the Thermal Effect during the Excimer Laser Ablation of Polymers with Different Gaseous Environment

James Jacob, P. Shanmugavelu ,R.Balasubramaniam and Ramesh K.Singh

Studies on CO2 Laser Micromachining on PMMA to Fabricate Micro Channel for Microfluidic Applications

Rishi Kant, Ankur Gupta and Shantanu Bhattacharya

Fabrication of micro lens array by excimer laser micromachining

Syed Nadeem Akhtar, Shashank Sharma and J. Ramkumar

Studies on laser-sintering of copper by direct metal laser sinteringprocess

A.R.Vinod and C.K. Srinivasa

Experimental Study on Micromachining of 304 Stainless Steel Under Water Using Pulsed Nd:YAG Laser Beam

Kumar Sharma, Alika Khare and J. Swaminathan

Improvement of Corrosion Resistance by Laser Surface Melting of 7075 Aluminum Alloy

A.C. Umamaheshwer Rao, V.Vasu , S.M. Shariff and K.V. SaiSrinadh

Finite Element Analysis on Pulsed Laser Forming of Sheet Metal

Kuntal Maji, D. K. Pratihar and A. K. Nath

Modeling and Optimization on Nd: YAG Laser Marking of Zirconia Ceramic using RSM and ANN

Josephine Peter, B. Doloi and B. Bhattacharyya

Thermo-mechanical Modeling of Laser Cladding of CPM9V on H13 ToolSteel

Santanu Paul, Ramesh Singh and Wenyi Yan

Experimental Investigations on CO2 Laser Micro Texturing on Near-Titanium Alloy (IMI 834)

M. Ravi Sankar, S. Tarun Kumar, Kishor Kumar Gajrani, J. Swaminathan and U. S. Dixit

Finite Element Simulations of Laser Bending of Small Sized Sheets

Besufekad N. Fetne and Uday S. Dixit

Surface Alloying of Aluminum with Copper using CO2 Laser

Gutu J. Woldetinsay, Mamilla Ravi Sankar and Uday S. Dixit

Energy Based Analysis of Laser Microchanneling Process on Poly-methyl-methacrylate

Shashi Prakash and Subrata Kumar

Experimental Investigation on Laser Bending of Metal Sheets Using Parabolic Irradiations

Parag M. Bhuyan, Ravi Kant and S.N. Joshi

An Experimental Investigation on Fiber Laser Welding at Controlled Inert Gas Atmosphere

Yadaiah Nirsanametla, Swarup Bag, C. P. Paul and L. M. Kukreja

Fabrication of Micro-Channels on Mild Steel Using Laser Induced Micro-Machining

Sanasam Sunderlal Singh, Kh. Shantakumar, Alika Khare and S.N. Joshi