Course Structure and Syllabus for BTech in Electronics and Electrical Engineering

 

(to be applicable from 2010 batch onwards)

 

Course No.

Course Name

L

T

P

C

 

Course No.

Course Name

L

T

P

C

Semester - 1

 

Semester -2

CH101

Chemistry

3

1

0

8

 

BT101

Modern Biology

3

0

0

6

CH110

Chemistry Laboratory

0

0

3

3

 

CS 101

Introduction to Computing

3

0

0

6

EE101

Electrical Sciences

3

1

0

8

 

CS110

Computing Laboratory

0

0

3

3

MA101

Mathematics - I

3

1

0

8

 

EE102

Basic Electronics Laboratory

0

0

3

3

ME110/       PH 110

Workshop /Physics Laboratory

0

0

3

3

 

MA102

Mathematics - II

3

1

0

8

ME 111**

Engineering Drawing

0

0

3

3

 

ME101

Engineering Mechanics

3

1

0

8

PH101

Physics - I

2

1

0

6

 

PH102

Physics - II

2

1

0

6

SA 101

Physical Training -I

0

0

2

0

 

PH 110/

ME 110

Physics Laboratory/Workshop

0

0

3

3

NCC/NSO/NSS

0

0

2

0

 

SA 102

Physical Training -II

0

0

2

0

11

4

9

39

 

 

NCC/NSO/NSS

0

0

2

0

** For 2010 batch the credit structure is 0-0-3-3

 

 

 

14

3

9

43

Semester 3

 

Semester 4

MA201

Mathematics - III

3

1

0

8

 

EE203

Analog Integrated Circuits

3

0

0

6

EE200

Semiconductor Devices and Circuits

3

0

0

6

 

EE221

Probability and Random Processes

3

1

0

8

EE201

Digital Circuits and Microprocessors

3

0

0

6

 

EE230

Principles of Communication

3

1

0

8

EE220

Signals, Systems and Networks

3

1

0

8

 

EE270

Measurement and Instrumentation

3

0

0

6

HS2xx

HSS Elective - I

3

0

0

6

 

HS2xx

HSS Elective - II

3

0

0

6

EE202

Digital Circuits Laboratory

0

0

3

3

 

EE 204

Analog Circuits Laboratory

0

0

3

3

SA201

Physical Training - III

0

0

2

0

 

SA 202

Physical Training - IV

0

0

2

0

NCC/NSO/NSS

0

0

2

0

 

 

NCC/NSO/NSS

0

0

2

0

15

2

3

37

 

 

 

15

2

3

37

Semester 5

 

Semester 6

EE320

Digital Signal Processing

3

0

0

6

 

EE340

Electromagnetic Theory

3

0

0

6

EE350

Control Systems

3

0

0

6

 

EE351

Advanced Control Systems

3

0

0

6

EE380

Electrical Machines

3

0

0

6

 

EE360

Embedded Systems

3

0

0

6

EE382

Electrical Power Systems

3

0

0

6

 

EE385

Power Electronics and Drives

3

0

0

6

HS3xx

HSS Elective - III

3

0

0

6

 

XXxxx

Open Elective - I

3

0

0

6

EE331

Communication Laboratory

0

0

3

3

 

EE304

Design Laboratory

0

0

3

3

EE381

Electrical Machines Laboratory

0

0

3

3

 

EE371

Control and Instrumentation Lab

0

0

3

3

15

0

6

36

 

 

 

15

0

6

36

Semester 7

 

Semester 8

EE480

Electrical Power Systems Operation and Control

3

0

0

6

 

EExxx

Dept. Elective -III

3

0

0

6

EExxx

Dept. Elective - I

3

0

0

6

 

EExxx

Dept. Elective - IV

3

0

0

6

EExxx

Dept. Elective - II

3

0

0

6

 

EExxx

Dept. Elective - V

3

0

0

6

XXxxx

Open Elective - II

3

0

0

6

 

HS4xx

HSS Elective - IV

3

0

0

6

EE482

Advanced Electrical Engineering Laboratory

0

0

3

3

 

XXxx

Open Elective - III

3

0

0

6

EE498

Project - I

0

0

6

6

 

EE499

Project - II

0

0

6

6

12

0

9

33

 

 

 

15

0

6

36

 

 

CH 101             Chemistry                    (3-1-0-8)

 

Structure and Bonding; Origin of quantum theory, postulates of quantum mechanics; Schrodinger wave equation: operators and observables, superposition theorem and expectation values, solutions for particle in a box, harmonic oscillator, rigid rotator, hydrogen atom; Selection rules of microwave and vibrational spectroscopy; Spectroscopic term symbol; Molecular orbitals: LCAO-MO; Huckel theory of conjugated systems; Rotational, vibrational and electronic spectroscopy; Chemical Thermodynamics: The zeroth and first law, Work, heat, energy and enthalpies; The relation between C­­v and Cp; Second law: entropy, free energy (the Helmholtz and Gibbs) and chemical potential; Third law; Chemical equilibrium; Chemical kinetics: The rate of reaction, elementary reaction and chain reaction; Surface: The properties of liquid surface, surfactants, colloidal systems, solid surfaces, physisorption and chemisorption; The periodic table of elements; Shapes of inorganic compounds; Chemistry of materials; Coordination compounds: ligand, nomenclature, isomerism, stereochemistry, valence bond, crystal field and molecular orbital theories; Bioinorganic chemistry and organometallic chemistry; Stereo and regio-chemistry of organic compounds, conformers; Pericyclic reactions; Organic photochemistry; Bioorganic chemistry: Amino acids, peptides, proteins, enzymes, carbohydrates, nucleic acids and lipids; Macromolecules (polymers); Modern techniques in structural elucidation of compounds (UV-vis, IR, NMR); Solid phase synthesis and combinatorial chemistry; Green chemical processes.

 

Texts:

1. P. W. Atkins, Physical Chemistry, 5th Ed., ELBS, 1994.

2. C. N. Banwell, and E. M. McCash, Fundamentals of Molecular Spectroscopy, 4th Ed., Tata McGraw-Hill, 1962.

3. F. A. Cotton, and G. Wilkinson, Advanced Inorganic Chemistry, 3rd Ed., Wiley Eastern Ltd., New Delhi, 1972, reprint in 1988.

4. D. J. Shriver, P. W. Atkins, and C. H. Langford, Inorganic Chemistry, 2nd Ed., ELBS ,1994.

5. S. H. Pine, Organic Chemistry, McGraw-Hill, 5th Ed., 1987

 

References:

1. I. A. Levine, Physical Chemistry, 4th Ed., McGraw-Hill, 1995.

2. I. A. Levine, Quantum Chemistry, EE Ed., prentice Hall, 1994.

3. G. M. Barrow, Introduction to Molecular Spectroscopy, International Edition, McGraw-Hill, 1962

4. J. E. Huheey, E. A. Keiter and R. L. Keiter, Inorganic Chemistry: Principle, structure and reactivity, 4th Ed., Harper Collins, 1993

5. L. G. Wade (Jr.), Organic Chemistry, Prentice Hall, 1987.

 

 

 

CS 101             Introduction to Computing                  (3-0-0-6)

 

Introduction: The von Neumann architecture, machine language, assembly language, high level programming languages, compiler, interpreter, loader, linker, text editors, operating systems, flowchart; Basic features of programming (Using C): data types, variables, operators,  expressions, statements, control structures, functions; Advanced programming features: arrays and pointers, recursion, records (structures), memory management, files, input/output, standard library functions, programming tools, testing and debugging; Fundamental operations on data: insert, delete, search, traverse and modify; Fundamental data structures: arrays, stacks, queues, linked lists; Searching and sorting: linear search, binary search, insertion-sort, bubble-sort, selection-sort, radix-sort, counting-sort; Introduction to object-oriented programming

 

Texts:

 

1.  A Kelly and I Pohl, A Book on C, 4th Ed., Pearson Education, 1999.

2.  A M Tenenbaum, Y Langsam and M J Augenstein, Data Structures Using C, Prentice Hall India, 1996.

 

References:

 

1. H Schildt, C: The Complete Reference, 4th Ed., Tata Mcgraw Hill, 2000

2. B Kernighan and D Ritchie, The C Programming Language, 4th Ed., Prentice Hall of India, 1988.

 

CS 110                         Computing Laboratory             (0-0-3-3)

 

Programming Laboratory will be set in consonance with the material covered in CS101. This will include assignments in a programming language like C.

 

References:

 

1.     B. Gottfried and J. Chhabra,  Programming With C,  Tata Mcgraw Hill, 2005

 

MA 102       Mathematics - II           (3-1-0-8)

 

Vector functions of one variable – continuity and differentiability; functions of several variables – continuity, partial derivatives, directional derivatives, gradient, differentiability, chain rule; tangent planes and normals, maxima and minima, Lagrange multiplier method; repeated and multiple integrals with applications to volume, surface area, moments of inertia, change of variables; vector fields, line and surface integrals; Green’s, Gauss’ and Stokes’ theorems and their applications.

 

First order differential equations – exact differential equations, integrating factors, Bernoulli equations, existence and uniqueness theorem, applications; higher-order linear differential equations – solutions of homogeneous and nonhomogeneous equations, method of variation of parameters, operator method; series solutions of linear differential equations, Legendre equation and Legendre polynomials, Bessel equation and Bessel functions of first and second kinds; systems of first-order equations, phase plane, critical points, stability. 

 

Texts:

1.        G. B. Thomas (Jr.) and R. L. Finney, Calculus and Analytic Geometry, 9th Ed., Pearson Education India, 1996.

2.        S. L. Ross, Differential Equations, 3rd Ed., Wiley India, 1984. 

References:

1.      T. M. Apostol, Calculus - Vol.2, 2nd Ed., Wiley India, 2003.

2.      W. E. Boyce and R. C. DiPrima, Elementary Differential Equations and Boundary Value Problems, 9th Ed., Wiley India, 2009.

3.      E. A. Coddington, An Introduction to Ordinary Differential Equations, Prentice Hall India, 1995.

4.      E. L. Ince, Ordinary Differential Equations, Dover Publications, 1958.

 

ME 101             Engineering Mechanics                        (3-1-0-8)

 

Basic principles: Equivalent force system; Equations of equilibrium; Free body diagram; Reaction; Static indeterminacy. Structures: Difference between trusses, frames and beams, Assumptions followed in the analysis of structures; 2D truss; Method of joints; Method of section;  Frame; Simple beam;  types of loading and supports;  Shear Force and bending Moment diagram in beams; Relation among load, shear force and bending moment. Friction: Dry friction; Description and applications of friction in wedges, thrust bearing (disk friction), belt, screw, journal bearing (Axle friction); Rolling resistance. Virtual work and Energy method: Virtual Displacement; Principle of virtual work; Applications of virtual work principle to machines; Mechanical efficiency; Work of a force/couple (springs etc.); Potential energy and equilibrium; stability. Center of Gravity and Moment of Inertia: First and second moment of area; Radius of gyration;  Parallel axis theorem;  Product of inertia, Rotation of axes and principal moment of inertia;  Moment of inertia of simple and composite bodies. Mass moment of inertia. Kinematics of Particles: Rectilinear motion; Curvilinear motion; Use of Cartesian, polar and spherical coordinate system; Relative and constrained motion; Space curvilinear motion. Kinetics of Particles: Force, mass and acceleration; Work and energy; Impulse and momentum; Impact problems; System of particles. Kinematics and Kinetics of Rigid Bodies: Translation; Fixed axis rotational;  General plane motion; Coriolis acceleration;  Work-energy;  Power;  Potential energy;  Impulse-momentum and associated conservation principles;  Euler equations of motion and its application.

 

Texts

1. I. H. Shames, Engineering Mechanics: Statics and Dynamics, 4th Ed., PHI, 2002.

2. F. P. Beer and E. R. Johnston, Vector Mechanics for Engineers, Vol I - Statics, Vol II – Dynamics, 3rd Ed., Tata McGraw Hill, 2000.

 

 

References

1. J. L. Meriam and L. G. Kraige, Engineering Mechanics, Vol I – Statics, Vol II – Dynamics, 5th Ed., John  Wiley, 2002.

2. R. C. Hibbler, Engineering Mechanics, Vols. I and II, Pearson Press, 2002.

 

 

PH 102             Physics - II                   (2-1-0-6)

 

Vector Calculus: Gradient, Divergence and Curl, Line, Surface, and Volume integrals, Gauss's divergence theorem and Stokes' theorem in Cartesian, Spherical polar, and Cylindrical polar coordinates, Dirac Delta function.

 

Electrostatics: Gauss's law and its applications, Divergence and Curl of Electrostatic fields, Electrostatic Potential, Boundary conditions, Work and Energy, Conductors, Capacitors, Laplace's equation, Method of images, Boundary value problems in Cartesian Coordinate Systems, Dielectrics, Polarization, Bound Charges, Electric displacement, Boundary conditions in dielectrics, Energy in dielectrics, Forces on dielectrics.

 

Magnetostatics: Lorentz force, Biot-Savart and Ampere's laws and their applications, Divergence and Curl of Magnetostatic fields, Magnetic vector Potential, Force and torque on a magnetic dipole, Magnetic materials, Magnetization, Bound currents, Boundary conditions.

 

Electrodynamics: Ohm's law, Motional EMF, Faraday's law, Lenz's law, Self and Mutual inductance, Energy stored in magnetic field, Maxwell's equations, Continuity Equation, Poynting Theorem, Wave solution of Maxwell Equations.

 

Electromagnetic waves: Polarization, reflection & transmission at oblique incidences.

 

Texts:

  1. D. J. Griffiths, Introduction to Electrodynamics, 3rd Ed., Prentice-Hall of India, 2005.
  2. A.K.Ghatak, Optics, Tata Mcgraw Hill, 2007.

 

References:

  1. N. Ida, Engineering Electromagnetics, Springer, 2005.
  2. M. N. O. Sadiku, Elements of Electromagnetics, Oxford, 2006.
  3. R. P. Feynman, R. B. Leighton and M. Sands, The Feynman Lectures on Physics, Vol.II, Norosa Publishing House, 1998.
  4. I. S. Grant and W. R. Phillips, Electromagnetism, John Wiley, 1990.

 

 

EE 102 Basic Electronics Laboratory               (0-0-3-3)

 

Experiments using diodes and bipolar junction transistor (BJT): design and analysis of half -wave and full-wave rectifiers, clipping circuits and Zener regulators, BJT characteristics and BJT amplifiers; experiments using operational amplifiers (op-amps): summing amplifier, comparator, precision rectifier, astable and monostable multivibrators and oscillators; experiments using logic gates: combinational circuits such as staircase switch, majority detector, equality detector, multiplexer and demultiplexer; experiments using flip-flops: sequential circuits such as non-overlapping pulse generator, ripple counter, synchronous counter, pulse counter and numerical display.

References:

 

  1. A. P. Malvino, Electronic Principles, Tata McGraw-Hill, New Delhi, 1993.
  2. R. A. Gayakwad, Op-Amps and Linear Integrated Circuits, PHI, New Delhi,  2002.

3.     R.J. Tocci, Digital Systems, 6th Ed., 2001.

 

EE 200          Semiconductor Devices and Circuits                   (3-0-0-6)

 

Energy bands; semiconductors; charge carriers: electrons and holes, effective mass, doping. Carrier concentration: Fermi level, temperature dependence of carrier concentration. Drift and diffusion of carriers: excess carriers; recombination and life time, Five equations of carrier transport. p-n Junction: depletion region, forward and reverse-bias, depletion and diffusion capacitances, switching characteristics; breakdown mechanisms; SPICE model. BJT: carrier distribution; current gain, transit time, secondary effects; SPICE model. Metal-semiconductor junctions: rectifying and ohmic contacts. MOSFET: MOS capacitor; Cv-Iv characteristics; threshold voltage; SPICE model. Single stage amplifiers: CE-CB-CC and CG-CD-CS modes of operation, large signal transfer characteristics of BJT and MOSFET,

Different types of biasing for BJT and MOSFET, Small signal parameters, Body effect in MOSFET, Parasitic elements, frequency response of CE and CS amplifiers. Analog ICs: DAC, ADC, VCO, PLL and 555-timer.

Texts:

1. R. F. Pierret, Semiconductor Device Fundamentals, PHI, 2006

2. P. R. Gray, P.Hurst, S.H. Lewis and R. G. Meyer, Analysis and Design of Analog Integrated Circuit, John Wiley, 2001.

 

References:

1. S. Sedra and K. C. Smith, Microelectronic Circuits, Oxford University Press, 1997.

2. M. S. Tyagi, Introduction to Semiconductor Materials and Devices, John Wiley & Sons Inc, 1991.

3. M. Shur, Introduction to Electronic Devices, John Wiley & Sons Inc., 2000

4. R. T. Howe and C. G. Sodini, Microelectronics: An Integrated Approach, Prentice-Hall Inc. 1997.

5. B. G. Streetman, Solid State Electronic Devices, 5th Ed., PHI, 2001.

6. J. Singh, Semiconductor Devices - Basic Principles, John Wiley & Sons Inc., 2001

 

 

 

EE 201      Digital Circuits And Microprocessors                 (3-0-0-6)

 

Digital logic families: TTL, MOS, interfacing between logic families; Combinational circuits: multiplexer/ demultiplexer, encoder/ decoder, adder/ subtractor, comparator and parity generators; Sequential circuits: latches and flip-flops (RS, JK, D, T, and Master Slave); Registers; Counters: ripple, ring, and shift register counters; Design and analysis of synchronous sequential finite state machine; Programmable logic devices; Introduction to HDL. Microprocessors: 8085 addressing modes, memory interfacing, interrupts, instructions, timing diagram; Introduction to 8086; Peripheral chips: I/Os, timer, interrupt controller, USART, DMA.


Texts:


     1. C. H. Roth (Jr.), Fundamentals of Logic Design, 4th Ed., Jaico Publishers, 2002.
     2. R. K. Gaonkar, Microprocessor Architecture, Programming and Applications with the 8085,

        Penram International Publishing (India), 2000.

References:


     1. M. D. Ercegovac, T. Lang, and J.H. Moreno, Introduction to Digital Systems, John Wiley, 2000.
     2. J. F. Wakerly, Digital Design – principles and practices, 4th Ed., Pearson Education, 2006.
     3. Z. Kohavi, Switching and Finite Automata Theory, 2nd Ed., Tata McGraw-Hill, 2008.
     4. V. P. Nelson, H. T. Nagle, B. D. Carroll and J. D. Irwin, Digital Logic Circuit Analysis and Design,

         Prentice-Hall, 1995.
     5. D. V. Hall, Microprocessors and Interfacing: programming and hardware, TMH, 1995.

 

 

 

EE 220           Signals, Systems and Networks                     (3-1-0-8)

 

Signals: classification of signals; signal operations: scaling, shifting and inversion; signal properties: symmetry, periodicity and absolute integrability; elementary signals. Systems: classification of systems; system properties: linearity, time/shift-invariance, causality, stability; continuous-time linear time invariant (LTI) and discrete-time linear shift invariant (LSI) systems: impulse response and step response; response to an arbitrary input: convolution; system representation using differential and difference equations; Eigen functions of LTI/ LSI systems, frequency response and its relation to the impulse response. Signal representation: signal space and orthogonal bases; Fourier series representation of continuous-time and discrete-time signals; continuous-time Fourier transform and its properties; Parseval's relation, time-bandwidth product; discrete-time Fourier transform and its properties; relations among various Fourier representations. Sampling: sampling theorem; aliasing; signal reconstruction: ideal interpolator, zero-order hold, first-order hold; discrete Fourier transform and its properties. Laplace transform and Z-transform: definition, region of convergence, properties; transform-domain analysis of LTI/LSI systems, system function: poles and zeros; stability. Review of network theorems: superposition, Thevenin’s, Norton’s, reciprocity, maximum power transfer, Millman’s and compensation theorems; Network topology: definition of basic terms, incidence matrix, tie-sets, cut-sets; Two port networks: characterization in terms of impedance, admittance, transmission, hybrid parameters and their relationships, interconnection of two port networks; Symmetrical two port network: T and π equivalents, image impedance, characteristic impedance and Propagation constant.

Texts:
     1. M. J. Roberts, Fundamentals of Signals and Systems, Tata McGraw Hill, 2007.
     2. M. E. V. Valkenburg, Network Analysis, 3rd Ed., Prentice Hall of India, 2003.

References:


     1. A. V. Oppenheim, A.S. Willsky and H.S. Nawab, Signals and Systems, PHI, 2006.
     2. B. P. Lathi, Signal Processing and Linear Systems, Oxford University Press, 1998.
     3. R. F. Ziemer, W.H. Tranter and D.R. Fannin, Signals and Systems - Continuous and Discrete,

        4th Ed., Prentice Hall, 1998.
     4. S. Haykin and B. V. Veen, Signals and Systems, John Wiley & Sons, 1998.
     5. C. A. Desoer and E. S. Kuh, Basic Circuit Theory, McGraw-Hill, 1969.
     6. F. F. Kuo, Netwok Analysis and Synthesis, 2nd Ed., Weily India, 2007.
     7. K. S. S. Kumar, Electric Circuits and Networks, Pearson Education, 2009.

 

 

EE 202                Digital Circuits Laboratory                         (0-0-3-3)

 

Combinational Logic design using decoders and multiplexers; design of arithmetic circuits using adder ICs; Flip flop circuit (RS latch, JK & master slave) using basic gates; Asynchronous Counters, Johnson & Ring counters; Synchronous counters; Sequential Circuit designs (sequence detector circuit), DAC circuit; Assembly language programming of 8085: a) sorting and code conversion, b) matrix multiplication; 8085 interfacing: a) parallel port interface (square wave generation), b) counter and timer interface (polling and using interrupts); ADC/DAC interfacing with 8085.
 Text/References:


     1. N. Wirth, Digital Circuit Design: An Introductory Textbook, Sringer, 1995.
     2. D. P Leach, A. P. Malvino and G. Saha, Digital Principles and Applications, 2nd Ed., TMH, 2006
     3. R. S. Gaonkar, Microprocessor Architecture, Programming and Applications with the           

         8085, Penram International Publishing (India), 2000.
     4. TTL IC Data Sheets (www.datasheetarchive.com/).

 

 

EE  203             Analog Integrated Circuits                         (3-0-0-6)

 

Frequency response of amplifiers: high frequency device models, frequency response, GBW, methods of short circuit and open circuit time constants, dominant pole approximation; Feedback amplifiers: basic feedback topologies and their properties, analysis of practical feedback amplifiers, stability; Power amplifiers: class A, B, AB, C, D, E stages, output stages, short circuit protection, power transistors and thermal design considerations; Differential amplifiers: DC and small signal analysis, CMRR, current mirrors, active load and cascode configurations, frequency response; case study: 741 op-amp – DC and small signal analysis, frequency response, frequency compensation, GBW, phase margin, slew rate, offsets; CMOS realizations: current source, sink and mirrors, differential amplifiers, multistage amplifiers; Signal generation and waveform shaping: sinusoidal oscillators- RC, LC, and crystal oscillators, Schmitt trigger; Analog subsystems: analog switches, voltage comparator, voltage regulator, switching regulator, bandgap reference voltage source, analog multiplier, filter approximations: Butterworth, Chebyshev and elliptic, first order and second order passive/active filter realizations.

Texts:

  1. 1. S. Smith, Microelectronics Circuits, 5th Ed., Oxford, 2005
  2. P. Gray, P. Hurst, S. Lewis and R. Meyer, Analysis & Design of Analog Integrated Circuits, 4th Ed., Wiley, 2001.

 

References:

 

  1. B. Razavi, Design of Analog CMOS Integrated Circuits, McGraw Hill 2001.
  2. D. Johns and K. Martin, Analog Integrated Circuit Design, Wiley, 1997.
  3. R. A. Gayakwad, Op-Amps and Linear Integrated Circuit, Prentice Hall of India, 2004.
  4. B. Razavi, RF Microelectronics, Prentice-Hall, 1998.
  5. P. E. Allen and D. R. Holberg, CMOS Analog Circuit Design, 2nd Ed., Oxford University Press, 1997.

 

 

EE 221          Probability and Random Processes                    (3-1-0-8)

 

Introduction to probability: mathematical background - sets, set operations, sigma and Borel fields; classical, relative-frequency and axiomatic definitions of probability; conditional probability, independence, total probability, Bayes’ rule; repeated trials; random variables: cumulative distribution function, continuous, discrete and mixed random variables, probability mass function, probability density functions; functions of a random variable; expectation - mean, variance and moments; characteristic and moment-generating functions; Chebyshev, Markov and Chernoff bounds; special random variables-Bernoulli, binomial, Poisson, uniform, Gaussian and Rayleigh; joint distribution and density functions; Bayes’ rule for continuous and mixed random variables; joint moments, conditional expectation; covariance and correlation- independent, uncorrelated and orthogonal random variables; function of two random variables; sum of two independent random variables; random vector- mean vector and covariance matrix, multivariate Gaussian distribution; sequence of random variables: almost sure and mean-square convergences, convergences in probability and in distribution, laws of large numbers, central limit theorem; elements of estimation theory- linear minimum mean-square error and orthogonality principle; random process: discrete and continuous time processes; probabilistic structure of a random process; mean, autocorrelation and autocovariance functions; stationarity- strict-sense stationary and wide-sense stationary (WSS) processes: autocorrelation and cross-correlation functions; time averages and ergodicity; spectral representation of a real WSS process-power spectral density, cross-power spectral density, linear time-invariant systems with WSS process as an input- time and frequency domain analyses; spectral factorization theorem; examples of random processes: white noise, Gaussian, Poisson and Markov processes.

Texts:

     1. A. Papoulis and S.U. Pillai, Probability Random Variables and Stochastic Processes, 4th Ed.,

         McGraw-Hill, 2002.

 2. A. L. Garcia, Probability and Random Processes for Electrical Engineering, 2nd Ed., Addison-Wesley, 1993.

References:


     1. P.Z. Peebles, Probability, Random Variables and Random Signal Principles, 4th Ed., Mc-Graw Hill,

         2000.
     2. H. Stark and J.W. Woods, Probability and Random Processes with Applications to Signal

         Processing, Prentice Hall, 2002.
     3. K. L. Chung and F. AitSahlia, Elementary Probability Theory with Stochastic Processes and an

         Introduction to Mathematical Finance, 4th Ed., Springer-Verlag, 2003.

 

 

 

EE 230         Principles of Communication                             (3-1-0-8)

 

Basic blocks in a communication system: transmitter, channel and receiver; baseband and passband signals and their representations; concept of modulation and demodulation. Continuous wave (CW) modulation: amplitude modulation (AM) - double sideband (DSB), double sideband suppressed carrier (DSBSC), single sideband suppressed carrier (SSBSC) and vestigial sideband (VSB) modulation; angle modulation - phase modulation (PM) & frequency modulation (FM); narrow and wideband FM. Pulse Modulation: sampling process; pulse amplitude modulation (PAM); pulse width modulation (PWM); pulse position modulation (PPM) ; pulse code modulation (PCM); line coding; differential pulse code modulation; delta modulation; adaptive delta modulation. Noise in CW and pulse modulation systems: Receiver model; signal to noise ratio (SNR); noise figure; noise temperature; noise in DSB-SC, SSB, AM & FM receivers; pre-emphasis and de-emphasis, noise consideration in PAM and PCM systems. Basic digital modulation schemes: Phase shift keying (PSK), amplitude shift keying (ASK), frequency shift keying (FSK) and Quadrature amplitude modulation (QAM); coherent demodulation and detection; probability of error in PSK, ASK, FSK & QAM schemes.  Multiplexing schemes: frequency division multiplexing  and time division multiplexing.

 

Texts:
     1. J. G. Proakis and M. Salehi, Communication system engineering, 2nd Ed., Pearson Education Asia,

         2002.

2. R. E. Ziemer and W. H. Tranter, Principles of Communications: Systems, Modulation, and Noise, 5th Ed., John Wiley & Sons, 2001.

References:
     1. S. Haykin, Communication Systems, 4th Ed., John Wiley & Sons, 2001.
     2. K. S. Shanmugam, Digital and Analog Communication Systems, John Wiley and Sons, 1979.
     3. A. B. Carlson, Communication Systems, 3rd Ed., McGraw Hill, 1986.
     4. B. P. Lathi, Modern Analog and Digital Communication systems, 3rd Ed., Oxford University Press,

                 1998.
             5. H. Taub and D. L. Schilling, Principles of Communication Systems, 2nd Ed., McGraw Hill, 1986.

 

 

EE 270             Measurement and Instrumentation                  (3-0-0-6)

 

 

Introduction to instrumentation; Static characteristics of measuring devices; Error analysis, standards and calibration; Dynamic characteristics of instrumentation systems; Electromechanical indicating instruments – AC/DC current and voltage meters, ohmmeter; Loading effect; Measurement of power and energy; Instrument transformers; Measurement of resistance, inductance and capacitance; AC/DC bridges; Transducers classification; Measurement of non-electrical quantities – displacement, strain, temperature, pressure, flow, and force; Signal conditioning; Instrumentation amplifier, isolation amplifier, and other special purpose amplifiers; Electromagnetic compatibility; Shielding and grounding; Signal recovery; Data transmission and telemetry; Data acquisition system; Modern electronic test equipment – oscilloscope, DMM, frequency counter, wave/ network/ harmonic distortion/ spectrum analyzers, logic probe and logic analyzer; programmable logic controller; Virtual instrumentation.

 

Texts:

1. E. O. Deobelin, Measurement Systems – Application and Design, Tata McGraw-Hill, 2004.

2. M. M. S. Anand, Electronic Instruments and Instrumentation Technology, Prentice-Hall of India, 2006.

3. A. D. Helfrick and W. D. Cooper, Modern Electronic Instrumentation and Measuring Techniques, Pearson Education, 2008.

 

References:

1.    R. A. Witte, Electronic Test Instruments, Pearson Education, 2002.

2.     B. E. Jones, Instrumentation, Measurement, and Feedback, Tata McGraw-Hill, 2000.

3.     R. P. Areny and T. G. Webster, Sensors and Signal Conditioning, Wiley-Interscience, 2000.

4.     C. F. Coombs, Electronic Instruments Handbook, McGraw-Hill, 2000.

  1. B. G. Liptak, Instrument Engineers’ Handbook: Process Measurement and Analysis, CRC,

2003.

 

 

EE 204               Analog Circuits Laboratory                        (0-0-3-3)

 

Experiments using BJTs, FETs, op-amps and other integrated circuits: Multistage amplifiers, automatic gain controlled amplifiers, programmable gain amplifiers; frequency response of amplifiers; voltage regulator with short circuit protection; phase locked loop; waveform generators; filters.


Text/References:


     1. A. P. Malvino, Electronic Principles, Tata McGraw-Hill, 2007.
     2. R. A. Gayakwad, Op-amps and Linear Integrated Circuits, Prentice Hall India, 2004.
     3. P. Horowitz and W. Hill, The Art of Electronics, Cambridge University Press, 2002.

 

 

 

EE 320       Digital Signal Processing                   (3-0-0-6)

 

Review of discrete time signals, systems and transforms: Discrete time signals, systems and their classification, analysis of discrete time LTI systems: impulse response, difference equation, frequency response, transfer function, DTFT, DTFS and Z-transform. Frequency selective filters: Ideal filter characteristics, lowpass, highpass, bandpass and bandstop filters, Paley-Wiener criterion, digital resonators, notch filters, comb filters, all-pass filters, inverse systems, minimum phase, maximum phase and mixed phase systems. Structures for discrete-time systems: Signal flow graph representation, basic structures for FIR and IIR systems (direct, parallel, cascade and polyphase forms), transposition theorem, ladder and lattice structures. Design of FIR and IIR filters: Design of FIR filters using windows, frequency sampling, Remez algorithm and least mean square error methods; Design of IIR filters using impulse invariance, bilinear transformation and frequency transformations. Discrete Fourier Transform (DFT): Computational problem, DFT relations, DFT properties, fast Fourier transform (FFT) algorithms (radix-2, decimation-in-time, decimation-in-frequency), Goertzel algorithm, linear convolution using DFT. Finite wordlength effects in digital filters: Fixed and floating point representation of numbers, quantization noise in signal representations, finite wordlength effects in coefficient representation, roundoff noise, SQNR

computation and limit cycle. Introduction to multirate signal processing: Decimation, interpolation, polyphase decomposition; digital filter banks: Nyquist filters, two channel quadrature mirror filter bank and perfect reconstruction filter banks, subband coding.

Texts:


     1. A. V. Oppenheim and R. W. Shafer, Discrete-Time Signal Processing, Prentice Hall India, 2nd Ed.,

        2004.
     2. J. G. Proakis and D. G. Manolakis, Digital Signal Processing: Principles, Algorithms and

        Applications, 4th Ed., Pearson Education, 2007.

References:


     1. V.K. Ingle and J.G. Proakis, Digital signal processing with MATLAB, Cengage, 2008.
     2. S. K. Mitra, Digital Signal Processing: A computer-Based Approach, 3rd Ed., Tata McGraw Hill,

         2006.
     3. T. Bose, Digital Signal and Image Processing, John Wiley and Sons, Inc., Singapore, 2004.
     4. L. R. Rabiner and B. Gold, Theory and Application of Digital Signal Processing, Prentice Hall

         India, 2005.
     5. A. Antoniou, Digital Filters: Analysis, Design and Applications, Tata McGraw-Hill, New Delhi,

         2003.
     6. T. J. Cavicchi, Digital Signal Processing, John Wiley and Sons, Inc., Singapore, 2002.
     7. E. C. Ifeachor and B. W. Jervis, Digital Signal Processing, Pearson Education, 2006.

 

 

EE 350                    Control Systems                          (3-0-0-6)

 

Modeling of physical systems: time-domain, frequency-domain and state-variable models; block diagram, signal flow graph and Mason’s gain formula; time and frequency response of first and second order systems; control system characteristics: stability, sensitivity, disturbance rejection and steady-state accuracy; stability analysis: Routh-Hurwitz test, relative stability, root locus, Bode and Nyquist plots; controller types: lag, lead, lag-lead, PID and variants of PID; controller design based on root-locus and frequency response plots; modern design techniques: canonical state-variable models, equivalence between frequency and time-domain representations, diagonalisation, controllability and observability, pole placement by state feedback, state feedback with integral control,  observer and observer based state feedback control.


Texts:

 

  1. K. Ogata, Modern Control Engineering, Prentice Hall India, 2006.
  2. G. F. Franklin, J. D. Powell and A. E. Emami-Naeini, Feedback Control of Dynamic Systems, Prentice Hall, 2006.

 

References:

 

  1. M. Gopal, Control Systems, 3rd Ed., Tata McGraw-Hill, 2008
  2. B. C. Kuo, Automatic Control Systems, 8th Ed., Wiley, 2002

 

EE 380              Electrical Machines                (3-0-0-6)

 

Magnetic circuits and transformer including 3-phase transformers; modeling of D.C. machines; phasor diagram of cylindrical rotor and salient pole machines- electromagnetic and reluctance torque, response under short circuit conditions; modeling of induction machines- derivation of equivalent circuits, dynamics under load change, speed reversal and  braking, unbalanced and asymmetrical operation; single phase induction motor and applications in domestic appliances; modeling of synchronous machines – equivalent circuit, d-q transformations, short circuit studies in synchronous machines; variable reluctance, permanent magnet, stepper motors and their applications.

Texts:
     1. S. Chapman, Electric Machinery Fundamentals, 4th Ed., McGraw-Hill, 2003.
     2. R. K. Rajput, Electrical Machines, 3rd Ed., Laxmi Publications (P) Ltd., 2003.
References:
     1. I. L. Kosow, Electrical Machinery and Transformers, 2nd Ed., Prentice- Hall of India Pvt. Ltd., 2003.
     2. B. S. Guru and H. R. Hiziroglu, Electrical Machinery and Transformers, 3rd Ed., Oxford University

        Press, 2003.

 

 

EE 382                   Electrical Power Systems           (3-0-0-6)

 

Generation of electrical energy: Basic structure of power system; demand of electrical system – base load, peak load; controlling power balance between generator and load, advantages of interconnected system; Thermal power plant – general layout, turbines, alternators, excitation system, governing system, efficiency; Hydel power plant – typical layout, turbines, alternators; Nuclear power plant – principle of energy conversion, types of nuclear reactors; brief overview of renewable energy sources. Transmission of electrical energy: Evaluation of Transmission line parameters- types of conductors, representation of transmission line, inductance calculation of single/three phase lines, concept of GMD and GMR, transposition of lines, bundled conductors, skin effect, proximity effect, capacitance calculation of single/three phase lines, effect of earth on calculation of capacitance, line resistance, line conductance; Analysis of transmission lines – representation, short/ medium/long transmission lines, nominal T/π network, ABCD parameters, surge impedance, Ferranti effect, power flow through a transmission line, reactive power compensation of transmission line; corona loss; Insulators for overhead transmission lines – types of insulators, string efficiency, methods to improve string efficiency;  Insulated cables – insulating material, grading of cables, capacitance of single/three core cable, dielectric loss; methods of grounding; Transient analysis – travelling waves, reflection and refraction, lattice diagram; mechanical design of transmission line. Distribution of Electrical Energy: D.C and A.C. distribution, radial and ring main distribution, medium voltage distribution network, low voltage distribution network, single line diagram, substation layout, substation equipments.

Texts: 

  1. L. M. Faulkenberry and W. Coffer, Electrical Power Distribution and Transmission, 2nd Ed., Pearson Education Inc., 2007.
  2. S. N. Singh, Electric Power Generation, Transmission and Distribution, Prentice-Hall, 2007.

References:

  1. J. D. Glover, M. S. Sarma and T. J. Overbye, Power System Analysis and Design, 4th Ed., Thomson Learning Inc., 2007.
  2. James Green and R. Wolson, Control and Automation of Electric Power Distribution System, Taylor and Francis, 2006.
  3. B. Sorensen, Renewable Energy, Academic Press, 2nd Ed., 2000.
  4. T. Gonen, Electric Power Distribution System, McGraw-Hill, 1986.
  5. W. D. Stevenson, Elements of Power System Analysis, 4th Ed., McGraw-Hill, 1982.
  6. D. P. Kothari and I. J. Nagrath, Modern Power System Analysis, McGraw-Hill, 2006.

 

 

EE 331             Communication Laboratory                       (0-0-3-3)

 

Amplitude modulation and demodulation (AM with carrier & DSBSC AM); frequency modulation and demodulation (using VCO & PLL); automatic gain control (AGC); pulse width modulation (PWM); pulse code modulation (PCM); pseudo-random (PN) sequence generation; binary phase shift keying (BPSK); binary frequency shift keying (BFSK).

 

Texts/References:


     1. W. Tomasi, Electronic Communications Systems – Fundamentals through advanced, 4th Ed.,

         Pearson, 2003.
     2. J. G. Proakis and M. Salehi, Communication Systems Engineering, Pearson, 2006.
     3. H. Taub and D. L. Schilling, Principles of Communication Systems, Tata McGraw-Hill, 2008.

 

 

EE 381              Electrical Machines Laboratory                (0-0-3-3)

 

Open circuit and short circuit tests of single phase transformer, three phase transformer connections, open circuit test and load characteristics of DC generator, speed control and output characteristics of DC motor, no load, blocked rotor and load tests on induction motor, open circuit and short circuit tests of an alternator.

Texts/References:
     1. S. Chapman, Electric Machinery Fundamentals, 4th Ed., McGraw-Hill, 2003.
     2. R. K. Rajput, Electrical Machines, 3rd Ed., Laxmi Publications (P) Ltd., 2003.

 

 

EE 340           Electromagnetic Theory                                (3-0-0-6)

 

Static fields: Coulomb’s and Gauss’ laws for electrostatics, Poisson’s and Laplace’s equations, Method of images and boundary value problems; Equation of continuity, Kirchoff’s voltage and current laws, Boundary conditions for current density; Biot-Savart’s law, Gauss’s and Ampere’s laws for magnetostatics, Magnetic vector potential; Magnetic dipoles, Magnetization and behavior of magnetic materials. Maxwell’s equations: Faraday’s law of electromagnetic induction, Maxwell’s discovery, Maxwell’s equations and boundary conditions, Time-harmonic fields. Wave equation and plane waves: Helmholtz wave equation, Solution to wave equations and plane waves, Wave polarization, Poynting vector and power flow in em fields. Plane waves at a media interface: Plane wave in different media, Plane wave reflection from a media interface, Plane wave reflection from a complex media interface. Finite-difference time-domain method: 1-, 2- and 3-dimensional simulations, Absorbing boundary conditions and perfectly matched layer, Applications. Antennas & radiating systems: Radiation fundamentals, Antenna patterns and parameters, Hertz dipole, Wire antennas, Loop antennas, Antenna arrays. Method of moments: Introductory example from electrostatics, Basic steps of the method of moments, Linear operator equation, Applications.

 

Texts:

 

  1. M. N. O. Sadiku, Elements of Electromagnetics, 3rd Ed., Oxford University Press, 2000.
  2. D. K. Cheng, Field and Wave Electromagnetics, 2nd Ed., Pearson Education, 2001.

 

References:

 

  1. A. Elsherbeni and V. Demir, The Finite-difference time-domain method for Electromagnetics with MATLAB Simulations, Scitech, 2009.
  2. K. E. Lonngren and S. V. Savov, Fundamentals Electromagnetics with MATLAB, PHI, 2005.
  3. C. A. Balanis, Antenna Theory: Analysis and Design, 3rd Ed., John Wiley, 2005.
  4. R. K. Shevgaonkar, Electromagnetic Waves, 1st Ed., McGraw Hill, 2006.
  5. R. F. Harrington, Time-Harmonic Electromagnetic Fields, 2nd Ed., Wiley-IEEE, 2001.
  6. N. Ida, Engineering Electromagnetics, 1st Ed., Springer, 2000.
  7. D. M. Sullivan, Electromagnetic Simulation using the FDTD Method, 1st Ed., Wiley-IEEE, 2000.  

 

 

EE 351                            Advanced Control Systems         (3-0-0-6)

 

Frequency response design: Design of lag, lead, lag-lead and PID controllers, the Nyquist criterion, analysis and design, relative stability and the Bode diagram, closed-loop response, sensitivity, time delays; Root locus design: construction of root loci, phase-lead and phase-lag design, PID controller design; Modern design: controllability and observability, state feedback with integral control, reduced order observer; Optimal control design: Solution-time criterion, Control-area criterion, Performance indices, Zero steady state step error systems; Modern control performance index: Quadratic performance index, Ricatti equation; Digital controllers: Use of z-transform for closed loop transient response, stability analysis using bilinear transform and Jury method, deadbeat control, Digital control design using state feedback; On-line identification and control: On-line estimation of model and controller parameters.

Texts:

  1. G. F. Franklin, J. D. Powel and A. E. Emami-Naeini, Feedback Control of Dynamic Systems, Prentice Hall Inc. 2002.
  2. M. Gopal, Control Systems, 3rd Ed., Tata McGraw Hill, 2008.

 

References:

 

  1. M. Gopal, Digital Control and State Variable Methods, Tata McGraw Hill, 2003.
  2. K. J. Astrom and T. Hagglund, Advanced PID Control, ISA, Research Triangle Park, NC 27709, 2005.  

 

 

EE 360                  Embedded Systems                                       (3-0-0-6)

 

Introduction: Introduction to embedded systems with examples, embedded system design & modeling with unified markup language (UML).  ARM processor fundamentals: Introduction to microprocessors and microcontrollers, 8-bit and 16- bit, von Neumann and Harvard architectures, CISC and RISC architectures, open source core (LEOX),  ARM versions, ARM instruction set: programming model, assembly language, Thumb instruction set, memory organization, data operations and flow control. CPUs: Input/output mechanisms, isolated and memory mapped IO; interrupts and real time operations, ARM interrupts vectors, priorities and latency; supervisor modes, exceptions, traps, co-processors; cache memory and memory management. Embedded Platforms: CPUs: bus protocols, system bus configuration, USB and SPI buses, DMA, ARM bus; memory devices: memory device configuration, ROM, RAM, DRAM; I/O devices: timers, counters, ADC  & DAC, keyboards, displays and touch screens. Processes and Operating Systems: multiple tasks and multiple processes; process abstraction; context switching: cooperative multitasking, preemptive multitasking, process and object-oriented design; operating systems and RTOS; scheduling polices; inter-process communication. Networks: distributed embedded architectures: networks abstractions, hardware and software architectures; networks for embedded systems: I2C bus, CAN bus; examples. Case studies: Inkjet printer, telephone exchange, etc.                      

 

Texts:

 

  1. W. Wolf, Computers as components: Principles of embedded computing system design, 2nd Ed., Elsevier, 2008.
  2. A. N. Sloss, D. Symes, and C. Wright, ARM system developer's guide: Designing and optimizing system software, Elsevier, 2008.

 

References:

 

  1. Product data sheet LPC 2141/42/44/46/48. NXP Semiconductors.
  2. ARM7TDMI Technical Reference Manual, ARM Limited.
  3. J.  Ganssle, The art of designing embedded systems, 2nd Ed., Elsevier, 2008.
  4. M. Barr, Programming Embedded Systems in C and C++, O'Really, 1999.
  5. K. Zurell, C Programming for Embedded Systems, CMP Books, 2000.

 

 

EE 385                 Power Electronics and Drives                      (3-0-0-6)

 

Power Semiconductor Devices: Diode, BJT, MOSFET, SCR, Triac, GTO, IGBT, MCT and their V-I characteristics, ratings, driver circuits, protection and cooling; AC-DC Converters (Rectifiers): Diode rectifier, thyristor based rectifier, effect of source inductance, single/three phase rectifiers, semi/full rectifiers, power factor, harmonics; DC-AC Converters (Inverters): Concept of switched mode inverters, PWM switching, voltage and frequency control of single/ three phase inverters, harmonics reduction, other switching schemes - square wave pulse switching, programmed harmonic elimination switching, current regulated modulation switching - tolerance band control, fixed frequency control; voltage source inverter (VSI), current source inverter (CSI); DC-DC Converters (Chopper): Principle; buck, boost and buck-boost converters; AC Voltage Controllers: Principle of ON-OFF control and phase control, single/three phase controllers, PWM AC voltage controller, cycloconverters; Electric drives: introduction and classification. DC motor drives: speed-torque characteristics of shunt, series, PMDC motors; dynamic models; speed and position control methods; AC motor drives: d-q model of induction motor; constant flux speed control structure; vector control model; vector control structure.

 

Texts:

 

  1. N. Mohan, Power Electronics- Converters, Applications and Design, 3rd Ed., John Wiley & Sons, 2003.
  2. G. K. Dubey, Fundamentals of Electrical Drives, Narosa Publishing House, 2003.

References:

 

  1. M. Rashid, Power Electronics- Circuits, Devices and Applications, 3rd Ed., Prentice Hall, 2004.
  2. B. K. Bose, Modern Power Electronics and AC Drives, Pearson Education, 2003.
  3. A. M. Trzynadlowski, Introduction to Modern Power Electronics, John Wiley & Sons, 1998.
  4. M. Rashid, Power Electronics Handbook, Academic Press-Elsevier, 2001.

 

 

EE 304                Design Laboratory                                             (0-0-3-3)

 

A student has to do an electronic hardware mini-project in broad areas like communication, electronic systems design, control and instrumentation, computer, power systems and signal processing. The project involves laying down the specifications, design, prototyping and testing. The project must have major hardware modules involving active discrete components and integrated circuits.

 

Texts/References:


     1. P. Horowitz and W. Hill, Art of Electronics, 2nd Ed., Cambridge University Press, 1989.
     2. M. M. Mano, Digital Design, Pearson Education, 2002.
     3. The ARRL Handbook for Radio Communications- American Radio Relay League, 2008.
     4. C. F. Coombs, Electronic Instruments Handbook, McGraw-Hill, 2000.
     5. T. Williams, The Circuit Designer’s Companion, Newnes, 2005.
     6. R. Pease, Troubleshootting Analog Circuits, Newnes, 1991.

 

 

EE 371      Control and Instrumentation  Laboratory               (0-0-3-3)

 

Development of circuits for signal conditioning, signal recovery, telemetry; PC based instrumentation; Computer controlled test systems; Experiments using modern electronic test equipment, Programmable logic controller. Modeling of physical systems, open-loop and closed-loop control of systems, design of classical controllers, closed loop control of servo systems and regulatory systems, state-feedback based design of modern controllers.

Texts/References:

 

  1. C. D. Johnson, Process Control Instrumentation Technology, Prentice Hall India, 2006.
  2. R. P. Areny and T. G. Webster, Sensor and Signal Conditioning, Wiley-Interscience, 2000.
  3. C. F. Coombs, Electronic Instruments Handbook, McGraw-Hill, 2000.
  4. K. Ogata, Modern Control Engineering, Prentice Hall India, 2006.
  5. G. F. Franklin, J. D. Powell and A. E. Emami-Naeini, Feedback Control of Dynamic Systems, Prentice Hall, 2006.

 

 

EE 480      Electrical Power Systems Operation and Control   (3-0-0-6)

 

Power system analysis: modeling of power system components - integrated operation of power systems, load flow studies, economic load dispatch, load frequency control, automatic generation control (AGC), power system stability; Power system protection: Symmetrical components, fault analysis, switchgear, fuses, circuit breakers and relays. Economics of power supply systems: Economic choice of conductor size and voltage level, maximum demand and diversity factor, tariffs, power factor correction; Introduction to high voltage DC transmission (HVDC), flexible AC transmission system (FACTS), supervisory control and data acquisition (SCADA).

Texts:

 

  1. D. P. Kothari and I. J. Nagrath, Modern Power System Analysis, McGraw-Hill, 2006.
  2. P. Kundur, Power System Stability and Control, McGraw-Hill, 1995.

 

References:

  1. N. G. Hingorani and L. Gyugyi, Understanding FACTS, Wiley-IEEE Press, 1999.
  2. J. Arrillaga, High voltage direct current transmission, 2nd Ed., IEE Power Engineering Series, 1998.
  3. A. J. Wood and B. F. Wollenberg, Power Generation Operation and Control, 2nd Ed., John Wiley & Sons, 1996.
  4. A. Wright and C. Christopoulos, Electrical Power system protection, Chapman & Hall, 1993.

 

 

EE 482     Advanced Electrical Engineering Laboratory       (0-0-3-3)

 

Reactive power compensation, synchronization of alternators, load angle characteristics of transmission line, ABCD parameters of transmission lines, fault analysis based on over-current and differential relays, design of simple inverters and voltage controllers, speed control of electric drives.

 

Texts/References:

 

  1. C. S. Indulkar, Laboratory Experiments in Electrical Power Engineering, Khanna Publishers, 2003.
  2. G. K. Dubey, Fundamentals of Electrical Drives, Narosa Publishing House, 2003.
  3. S. N. Singh, Electric Power Generation, Transmission and Distribution, Prentice-Hall, 2007.
  4. R. K. Rajput, Electrical Machines, 3rd Ed., Laxmi Publications (P) Ltd, 2003.
  5. P. Kundur, Power System Stability and Control, McGraw-Hill, 1995.