INDIAN INSTITUTE OF TECHNOLOGY, GUWAHATI

Dr. Sachin D. Kore

Associate Professor
Department of Mechanical Engineering
Indian Institute of Technology Guwahati
Guwahati Office: D-304, DoME
Phone: +91-361-258 2652, Fax: :+91 361 2690762
E-mail: sdk@iitg.ernet.in

 

 

Publications :

 

 

Contributed Book Chapters:

 

 

1.    S.D. Kore, J. Imbert, M. Worswick, Y. Zhou, Book chapter on Electromagnetic Pulse Welding of Aluminum to Magnesium Sheets, in ‘Welding and joining of magnesium alloys’, Ed. Liming Liu, Woodhead Publishing, October, 2010, pp 367-378.

 

2.    S.D. Kore, J. Imbert, M. Worswick, Y. Zhou, Book chapter on Magnetic Pulse Welding, in Welding Fundamentals and Processes, ASM Handbook, Vol 6 A, November 2011, pp 704-710.

 

 

 

Papers in Referred International Journal :

 

1 S.D. Kore, P.P. Date, S.V. Kulkarni, Effect of Process Parameters on Electromagnetic Impact Welding of Aluminum Sheets, International Journal of Impact Engineering, Vol. 34, No. 8, 2007, pp 1327-34.

 

2 S.D. Kore, P.P. Date, S.V. Kulkarni, Electromagnetic Impact Welding of Aluminum to Stainless Steel Sheets, Journal of Materials Processing Technology, Vol. 208, Nos. 1-3, 2008, pp 486-493.

 

3 S. D. Kore, P. P. Date, S.V. Kulkarni, Satendra Kumar, Dolly Rani, M. R. Kulkarni, S.V. Desai, R.K. Rajawat, K.V. Nagesh, and D.P. Chakravarty,  Electromagnetic Welding of Al-to-Al-Li Sheets, ASME, Journal of Manufacturing Science and Engineering,Vol. 131, No. 034502, 2009, pp 1-4.

 

4 S.D. Kore, J. Imbert, M.J. Worswick, Y. Zhou, Electromagnetic Impact Welding of Mg to Al Sheets, Science and Technology Welding and Joining, Vol. 14, No. 6., 2009,pp 549-553.

 

5 S. D. Kore, P. P. Date, S.V. Kulkarni, Satendra Kumar, Dolly Rani, M. R. Kulkarni, S.V. Desai, R.K. Rajawat, K.V. Nagesh, and D.P. Chakravarty,  Electromagnetic Impact Welding of Cu to Cu Sheets, International Journal of Material Forming, 2010 3:pp117–121.

 

6 S.D. Kore, P.P. Date, S.V. Kulkarni, Numerical Modeling of Electromagnetic Welding, International Journal for Applied Electromagnetics and Mechanics, Vol. 32, No. 1, 2010, pp 1-19.

 

7 S. D. Kore, P. P. Date, S.V. Kulkarni, Satendra Kumar, Dolly Rani, M. R. Kulkarni, S.V. Desai, R.K. Rajawat, K.V. Nagesh, and D.P. Chakravarty,  Application of Electromagnetic Impact Technique for Welding Copper-to-Stainless Steel Sheets, International Journal of Advanced Manufacturing Technology, October 2011,54; pp 949-955.

 

8 S.D. Kore, P.N. Vinod, S. Kumar, M. R. Kulkarni, Study of Wavy Interface in Electromagnetic Welds, Key Engineering Materials Vols. 504-506,2012, pp, 729-734.

 

9 J.K. Doley, S.D. Kore, Fully Coupled Numerical Simulation of Electromagnetic Forming. Key Engineering Materials Vols. 504-506,2012, pp 1201-1206.

 

10 J. K. Doley, S.D. Kore, Studies on Temperature Distribution in Electromagnetic Welding Process, ASTM, Vol 1, Issue 1, September 2012, pp 73-84.

 

11 Ghatule P.,  Kore S. D., Coupled 3D Finite Element Modeling of Electromagnetic Free Expansion of Al Tube, Internaional Journal of Advanced Materials Manufacturing and Characterisation, Vol 3, Issue 1, March 2013, pp 95-98.

 

12 J.Doley, S.D. Kore, Electromagnetic Formability of Ice-Tray, Key Engineering Materials, Vol 611-612, 2014, pp 1124-1131.

 

13 C. Patel, S. D. Kore, Dual Electromagnetic Forming Using Single Uniform Pressure Coil, Key Engineering Materials, Vol 611-612, 2014,  pp 723-730.

 

14 Tushar Mane, Vasu Goel, S. D. Kore,  Finite Element Modelling of Electrohydraulic Forming of Sheets, Procedia Materials Science, Volume 6, 2014, pp 105-114.

 

15 C. Patel, S. D. Kore , Effect of Frequency on electromagnetic expansion of thin tubes, Journal of Machining and Forming Technologies, 2015, Volume 7 Issue 1-2., 2015.

 

16 C. Patel, S. D. Kore Finite Element Analysis of Crowbarring Effect During Electromagnetic Forming, International Journal of Manufacturing Technology and Management. , Vol. x, No. x,xxx 1, In press Sept 2015.

17 C. Patel, P. Ghatule, S. D. Kore, Effect of Process Parameters on EM Forming of Al tubes, accepted for publication in International journal of Materials and Product Technology, Inderscience, October 2015.

 

18 Himanshu Chaudhary and Sachin D. Kore, Electromagnetic forming analysis of AA5182 at elevated temperatures, Int. J. Microstructure and Materials Properties, Vol. 11, Nos. 1/2, 2016.

 

19 Jyoti K. Doley and Sachin D. Kore, A Study on Friction Stir Welding of Dissimilar Thin Sheets of Aluminum Alloys AA 5052–AA 6061 , J. Manuf. Sci. Eng 138(11), 114502, 2016.

 

20 R. Kumar and S. D. Kore, "Effects of Surface Profiles on the Joint Formation during Magnetic Pulse Crimping in Tube-to-Rod Configuration," International Journal of Precision Engineering and Manufacturing , vol. 18, no. 9, pp. 1181-1188, 2017.

 

21 Ashish Kumar Rajak, Sachin D Kore,Experimental investigation of aluminium–copper wire crimping with electromagnetic process: Its advantages over conventional process,Journal of Manufacturing Processes,2017,26,-57,66

 

22 Piyush Singh, Pankaj Biswas, Sachin D. Kore, Influence of Traverse Speed in Self-Reacting FSW of AA6061-T6, Journal of Ship Production and Design,2017

 

23 Piyush Singh, Pankaj Biswas, Sachin D. Kore, A three-dimensional fully coupled thermo-mechanical model for Self-reacting Friction Stir Welding of Aluminium AA6061 sheets, 2016, J. Phys.: Conf. Ser., 759, pp. 012047

 

24 Ashish Kumar Rajak and Sachin D Kore, “Numerical Simulation and Experimental Study on Electromagnetic Crimping of Aluminium Terminal to Copper Wire Strands” Electric Power Systems Research, 2017,DOI: 10.1016/j.epsr.2017.08.014

 

25 J.Doley, Sachin D. Kore, Comparison of electromagnetic forming of friction stir-welded blanks of dissimilar material AA5052-AA6061with conventional forming process, International Journal of Advanced Manufacturing Technology, 2017.

 

26 R. Kumar and S. D. Kore, "Electromagnetic Crimping in Tube-to-Cylinder Configuration: Influence of the Base Profiles on the Joint Quality," Journal of Testing and Evaluation, vol. 46, no. 3, pp. 1-14, 2018.

 

27 R. Kumar and S. D. Kore, "Finite Element Modelling and Analysis of the Effect of Frequency on the Electromagnetic Compression of Tubes," In Journal of Physics Conference Series, vol. 759, no. 1, p. 012055, 2016.

 

 

 

Papers in International Conferences/ Workshops:

 

 

26. Kumar, Ramesh and Doley, Jyoti and Kore, Sachin, Finite element modeling and analysis of electro-magnetic pulse welding of aluminium tubes to steel bars , AIP Conference Proceedings, 1769, 060003 (2016), DOI:http://dx.doi.org/10.1063/1.4963439

 

25.  Piyush Singh, Sachin D. Kore and Pankaj Biswas,  A three-dimensional fully coupled thermo-mechanical model for Self-reacting Friction Stir Welding in Aluminium alloy AA6061, IUPAP Conference on Computational Physics: CCP2015 XXVII, MNSCP 294.

 

24.  Ashish Rajak, Sachin D. Kore, Effect of process parameters on Electromagnetic Hemming of AA 1050 alloy, IUPAP Conference on Computational Physics: CCP2015,  309.

 

23. Sachin D. Kore Ramesh Kumar, Finite element modeling and analysis of the effect of frequency on the electromagnetic compression of tubes,  IUPAP Conference on Computational Physics: CCP2015, 189.

 

22. Kasif Ansari, Sachin Kore, Micro-plasma arc welding of SS Sheets, Proceedings of Advancement in Welding, Cutting and Surfacing Technologies for Improved Economy, Reliability and Sustainable Environment, held at New Delhi, India, 2014, pp 101-108.

 

21. Tushar Mane, Vasu Goel, S. D. Kore, Finite Element Modelling of Electrohydraulic Forming of Sheets, Proceedings of 3rd International Conference on Materials Processing and Characterisation, Hyderabad, India,  March 2014, pp 105-114.

 

20. C. Patel, S. D. Kore, Dual Electromagnetic Forming Using Single Uniform Pressure Coil, 7th Conference of the European Scientific Association on Material Forming (ESAFORM 2014), May 7-9, 2014, Espoo, Finland, pp 723-30.

 

19. J.Doley, S.D. Kore, Electromagnetic Formability of an Aluminium Ice-Tray, 7th Conference of the European Scientific Association on Material Forming (ESAFORM 2014), May 7-9, 2014, Espoo, Finland, pp.1124-1131.

 

18. J. Doley, S. D. Kore, Warm Electromagnetic Forming of AZ 31 B Alloys, Proceedings of 6th International Conference on High Speed Forming, held at Daejeon, Korea, 2014, PP 273-280.

 

17. M. J.Borah, S. N. Joshi, S. D. Kore, Effect of CO2 Laser Welding Process Parameters on Temperature Distribution of SS 304 sheets, Proceedings of the 7th Asia Pacific IIW International Congress 2013, Singapore,  2013 pp 517-522

 

16. S. D. Kore, Electromagnetic Forming of Sheets, Kay Note Talk at 2nd international conference on materials processing and characterization (ICMPC2013) held at GRIET Hyderabad, March 16-17, 2013.

 

15. S.D. Kore, P.N. Vinod, S. Kumar, M. R. Kulkarni, Study of Wavy Interface in Electromagnetic Welds, Innovative Joining by Forming, 15th ESAFORM Conference, Editors: M. Merklein and H. Hagenah, Feiedrich-Alexander Universitat, Erlangen-Nurenberg, Germany, March 2012, pp 729-734.

 

14. J.K. Doley, S.D. Kore, Fully Coupled Numerical Simulation of Electromagnetic Forming. Non Conventional Processes, 15th ESAFORM International Conference, Editors: M. Merklein and H. Hagenah, Feiedrich-Alexander Universitat, Erlangen-Nurenberg, Germany, March 2012, pp 1201-1206.

 

13. H. Chaudhary, S.D. Kore, Free-Forming of Aluminium Alloy Using Electromagnetic Forming Process, International Deep Drawing Research Group Conference, (IDDRG) 2012, held at IIT Bombay, Mumbai, November 2012, pp 662-667.

 

12. P.R. Mohite, S.D. Kore, Numerical Modeling of Electromagnetic Impact Welding Process, SPICON 2012, International Conference held at SPCOE Mumbai,June 2012, pp 241-247.

 

11. S.D. Kore, J. Imbert, Y. Zhou and M. Worswick, Characterisation of Electromagnetic Pulse Welds of Al-Al and Al-AZ 31 sheets, 64th Annual Assembly and International Conference of the International Institute of Welding, Global Trends in Joining, Cutting and Surface Technology, Chennai, 17-22 July 2011, pp 775-780.

 

10. J. Doley and S.D. Kore, Study of Impact Behaviour of Sheets in Electromagnetic Pulse Welding, 64th Annual Assembly and International Conference of the International Institute of Welding, Global Trends in Joining, Cutting and Surface Technology, Chennai, 17-22 July 2011,pp 889-892.

 

9. P. Dhanesh, S. D. Kore, P. P. Date, A Numerical Criterion for the Formation of a Solid State Welded Joint in Sheets by Electromagnetic Forming/Joining, Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011, 2011, pp 1154-1159.

 

8. H. Choudhary, J. Doley, S.D. Kore, Technical Note on Strong Coupling in Electromagnetic Forming, Proceedings of the International Conference on Computational Methods in Manufacturing, IIT Guwahati, Dec, 15-16, 2011.

 

7. Avinandan Sandilya, P.N. Vinod, and S. D. Kore, Comparison of Fusion Welds with Electromagnetic Welds, COPEN-7, held at COEP Pune, Dec 9-10, 2011, pp 424-427.

 

6.  S.D. Kore, Invited Paper and Talk on ‘Magnetic Pulse Welding of Similar and Dissimilar Metals’, at International Workshop on Electromagnetic Forming Technique 2010 (EMFT 2010), held at Anna University, Chennai, Nov. 11-12, 2010.

 

5  S.D. Kore, P.P. Date, and S.V. Kulkarni, Electromagnetic Welding of Aluminum Sheets, Sheet Metal Welding Conference XII, Detroit,  USA, 2006, pp 1-6.

 

4 S.D. Kore, Electromagnetic Forming and Welding of Metals: A brief Review, (Invited Paper) at Sheet Metal Forming 09, IIT Bombay, India, pp. 107-115, 2009.

 

3 S.D. Kore and Dongre G.G., Automation in Small Scale Industries, First International Conference on Development and Challenges in Manufacturing Engineering, held at MIT, MAHE, deemed university, Manipal, India., 2004, pp 8-14.

 

2 S.D. Kore, Process Advancement in Manufacturing of Dry Battery Cells, Transmat Expo, International Conference and Exhibition on Advancement in Materials and Processes, Used in the Manufacturing of Transport Vehicles, Mumbai, India, 2004, pp 1-6.

 

1 S.D. Kore, Electromagnetic Forming and Welding of Metals: A brief Review, Modern Machine Tools Magazine, IMTEX Forming Special Issue; IMTEX FORMING 2010 & Tooltech 2010, Banglore, India, 2010

 

 

 

 

 

 

Research areas

 

Publications

 

Sponsored Projects

 

Consultancy Services

 

 

 

Events

 

People

 

Gallery

 

Contact us