1 |
2023 |
|
Performance Analysis of Arc Rib Fin Embedded in a Solar Air Heater |
Thermal Science and Engineering Progress |
2 |
2023 |
|
Spreadsheet analysis of the field-driven start-up flow in a microfluidic channel |
Electrophoresis |
3 |
2022 |
|
Magnetowetting Dynamics of Sessile Ferrofluid Droplets: A Review |
Soft Matter |
4 |
2022 |
|
Evolution of jets during drop impact on a deep liquid pool |
Physics of Fluids |
5 |
2022 |
|
Transport behaviour of commercial anti-cancer drug protein-bound paclitaxel (Paclicad) in micron-sized channel |
Langmuir |
6 |
2022 |
|
Interfacial Dynamics of Viscous Droplets Impacting a Superhydrophobic Candle Soot Surface: Overview and Comparison |
Physics of Fluids |
7 |
2022 |
|
Comparison of different methods for estimating the notch stress intensities at sharp V-notches |
Journal of Mechanics of Materials and Structures |
8 |
2022 |
|
Cylindrical Impacts on GLARE 5 Plates with Open Hole |
Applied Composite Materials |
9 |
2022 |
|
An Approximate Single-Loop Chaos Control Method for Reliability-Based Design Optimization using Conjugate Gradient Search Directions |
Engineering Optimization |
10 |
2022 |
|
Effect of layer orientation on the single tooth bending fatigue strength of polymer gears manufactured by selective laser sintering |
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications |
11 |
2022 |
|
Coupled thermomechanical modelling of shape memory alloy structures undergoing large deformation |
International Journal of Mechanical Sciences |
12 |
2022 |
|
A new simple specimen for mixed-mode (I/II) fracture and fatigue tests:Numerical and experimental studies |
European Journal of Mechanics / A Solids |
13 |
2022 |
|
Use of industrial waste materials for 3D printing of sustainable concrete: A review |
Journal of Cleaner Production |
14 |
2022 |
|
3D concrete printing modelling of thin-walled structures |
Structures |
15 |
2022 |
|
Mesoscopic characterization of bubble dynamics in subcooled flow boiling following a pseudopotential-based approach |
International Journal of Multiphase Flow |
16 |
2022 |
|
Characterization of condensation on nanostructured surfaces and associated thermal hydraulics using thermal lattice Boltzmann method |
Phys. Rev. E |
17 |
2022 |
|
2D closed form solution for bending of edge bonded dissimilar beams: an application of EKM |
Composite Structures |
18 |
2022 |
|
P(VDF-TrFE)/ZnO nanofiber composite based piezoelectric nanogenerator as self-powered sensor: fabrication and characterization |
|
19 |
2022 |
|
Fabrication and Characterization of Cu/SiC-Based Axially Functionally Graded Beam |
Advanced Engineering Materials |
20 |
2022 |
|
Engineering Aspects of Incidence, Prevalence, and Management of Osteoarthritis: A Review |
Annals of Biomedical Engineering |
21 |
2022 |
|
Identification of limiting damping mechanisms in a high quality factor hybrid resonator of space application gyroscope |
|
22 |
2022 |
|
Comparative fretting fatigue life evaluation between critical plane based and deviotoric strain amplitude based methods corrected for surface wear damage |
SAE International Journal of Materials and Manufacturing |
23 |
2022 |
|
Investigations on the trochoidal toolpath for processing the biomaterial through magnetorheological fluid assisted finishing process |
Journal of Manufacturing Processes |
24 |
2022 |
|
Application of Artificial Neural Network for Understanding Multi-Layer Microscale Transport Comprising of Alternate Newtonian and non-Newtonian fluids |
Colloids Surfaces A Physicochem. Eng. Asp |
25 |
2022 |
|
Survivability of a particle laden sessile coughed and sneezed droplet subjected to different ambient conditions |
International Journal of Thermal Sciences |
26 |
2022 |
|
Aerodynamic Investigation of Passer Domesticus Inspired Biomimetic Wing at Low Reynolds number |
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science |
27 |
2022 |
|
Numerical Investigation of Flow Over Oscillating Cambered Foil at Low Reynolds Number |
ASME, Journal of Fluids Engineering |
28 |
2022 |
|
Thermal and flow characteristics of nonequilibrium monatomic, diatomic, and polyatomic gases in cylindrical Couette flow based on second-order non-Navier–Fourier constitutive model |
International Journal of Heat and Mass Transfer |
29 |
2022 |
|
Multi-Objective Robust Optimization of Deep Groove Ball Bearings Considering Manufacturing Tolerances Based on Fatigue and Wear Considerations |
ASME, Journal of Tribology |
30 |
2022 |
|
Identification of unbalance characteristics of rotating machinery using a novel optimization-based methodology |
Soft Computing |
31 |
2022 |
|
An innovative virtual trial misalignment approach for identification of unbalance, sensor and active magnetic bearing misalignment along with its stiffness parameters in a magnetically levitated flexible rotor system |
Mechanical Systems and Signal Processing |
32 |
2022 |
|
Experimental visualization and analysis of multiphase immiscible flow in fractured micromodels using micro-particle image velocimetry |
ASME Journal of Energy Resources Technology |
33 |
2022 |
|
Composite-inspired multilattice metamaterial structure: An auxetic lattice design with improved strength and energy absorption |
Materials Today Communications |
34 |
2022 |
|
Strengthening mechanisms and deformation behavior of industrially-cast and lab-cast dual-phase high entropy alloy |
Metals and Materials International |
35 |
2022 |
|
Extrinsic cohesive zone modeling for interface crack growth: Numerical and Experimental studies |
Engineering Fracture Mechanics |
36 |
2021 |
|
Determination of temperature distribution in cold forging with the support of inverse analysis |
Measurement |
37 |
2021 |
|
Discerning the self-healing, shear-thinning characteristics and therapeutic efficacy of hydrogel drug carriers migrating through constricted microchannel resembling blood microcapillary |
Colloids and Surfaces A: Physicochemical and Engineering Aspects |
38 |
2021 |
|
Generating compressive surface residual stresses using hydraulic autofrettage process with heat treatment |
ASME Journal of Pressure Vessel Technology |
39 |
2021 |
|
Increased Reliability of the Technological Torsion Forging Process for Products from Aluminum Alloys |
Journal of Machinery Manufacture and Reliability |
40 |
2021 |
Jyotindra Narayan, Mohamed Abbas, Santosha K. Dwivedy |
Transpose Jacobian Control of Flexible Joint Upper Limb Exoskeleton System |
Machines, Mechanism and Robotics. Lecture Notes in Mechanical Engineering |
41 |
2021 |
|
Effect of length in rotational autofrettage of long cylinders with free ends |
Proceedings of IMECH-E, Part C: Journal of Mechanical Engineering Science |
42 |
2021 |
Mohamed Abbas, Sami Al Issa, Santosha K. Dwivedy |
Event-Triggered Adaptive Hybrid Position-Force Control for Robot-Assisted Ultrasonic Examination System |
Journal of Intelligent & Robotic Systems |
43 |
2021 |
|
Numerical simulations for studying the influence of friction in forging |
Advances in Materials and Processing Technologies |
44 |
2021 |
Jyotindra Narayan, Santosha K Dwivedy |
Robust LQR-Based Neural-Fuzzy Tracking Control for a Lower Limb Exoskeleton System with Parametric Uncertainties and External Disturbances |
Applied Bionics and Biomechanics |
45 |
2021 |
Shivansh Mishra, Jyotindra Narayan, Kamalpreet Sandhu, Santosha K Dwivedy |
Successful Stories of 3D Printing in Healthcare Applications: A Brief Review |
Springer Nature |
46 |
2021 |
|
Electrohydrodynamics induced interactions between droplets |
Journal of Fluid Mechanics |
47 |
2021 |
|
Development of a phase change solver for concentrated energy beam applications |
International Communications in Heat and Mass Transfer |
48 |
2021 |
|
Blockage and cavitation detection in centrifugal pumps from dynamic pressure signal using deep learning algorithm |
Measurement |
49 |
2021 |
Jyotindra Narayan, Santosha K Dwivedy |
Preliminary Design and Development of a Low-Cost Lower-Limb Exoskeleton System for Paediatric Rehabilitation |
Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, SAGE Publications |
50 |
2021 |
Jyotindra Narayan, Bhaben Kalita, Santosha Kumar Dwivedy |
Development of Robot-Based Upper Limb Devices for Rehabilitation Purposes: a Systematic Review |
Augmented Human Research |
51 |
2021 |
|
Design of a disk-mandrel assembly for achieving rotational autofrettage in the disk |
Proceedings of IMECH-E, Part C: Journal of Mechanical Engineering Science |
52 |
2021 |
|
Cost Comparison of Selective Laser Sintering with Injection Molding in the presence of uncertainties |
Journal of Advanced Manufacturing Systems |
53 |
2021 |
|
Estimation of surface roughness in a turning operation using industrial big data |
International Journal of Machining and Machinability of Materials |
54 |
2021 |
|
Performance study of a sterilization box using a combination of heat and ultraviolet light irradiation for the prevention of COVID-19 |
Environmental Research |
55 |
2021 |
|
Simulation of monotonic loading programs with constant strain rate on a modern universal testing machine |
Technology of Light Alloys |
56 |
2021 |
|
Numerical Analysis of Conjugate Heat Transfer in a Planar Sudden Expansion Flow |
Journal of The Institution of Engineers (India): Series C |
57 |
2021 |
|
Numerical study of the vortex induced electroosmotic mixing of non-Newtonian biofluids in a non-uniformly charged wavy microchannel: Effect of finite ion size |
Electrophoresis |
58 |
2021 |
|
Magnetofluidic mixing of a ferrofluid droplet under the influence of time-dependent external field |
J. Fluid Mech. |
59 |
2021 |
|
Irreversibility analysis of the convective flow through corrugated channels: a comprehensive review |
Eur. Phys. J. Plus |
60 |
2021 |
|
Multifunctional Liquid Marbles to Stabilize and Transport Reactive Fluids |
Soft Matter |
61 |
2021 |
|
Algorithmic augmentation in pseudopotential-based lattice Boltzmann method for simulating pool boiling phenomenon with high-density ratio |
Phys. Rev. E |
62 |
2021 |
|
Mixing in a rotating soft microchannel under electrical double layer effect: A variational calculus approach |
Phys. Fluids |
63 |
2021 |
|
Electro-osmotic Flow through Nanochannel with Different Surface Charge Configurations: A Molecular Dynamics Simulation Study |
Phys. Fluids |
64 |
2021 |
|
Buoyancy driven flow of a couple stress fluid from an isothermal vertical plate: The role of spatially periodic magnetic field |
Physica Scripta |
65 |
2021 |
|
Bejan's flow visualization of buoyancy-driven flow of a hydromagnetic Casson fluid from an isothermal wavy surface |
Phys. Fluids |
66 |
2021 |
|
Simulation of experimental optimization of xylanase production by Penicillium citrinum xym2 by artificial neural network (ANN) |
Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng. |
67 |
2021 |
|
Quantitative model for predicting the imbibition dynamics of viscoelastic fluids in non-uniform microfluidic assays |
Phys. Rev. E |
68 |
2021 |
|
Irreversibility analysis of hybrid nanofluid flow over a rotating disk: Effect of thermal radiation and magnetic field |
Colloids Surfaces A Physicochem. Eng. Asp. |
69 |
2021 |
|
Influence of CNTs on interface delamination resistance in broken ply carbon/CNT-epoxy composites |
Mechanics Based Design of Structures and Machines |
70 |
2021 |
|
Qualitative predictions of bone growth over optimally designed macro-textured implant surfaces obtained using NN-GA based machine learning framework |
Medical Engineering & Physics |
71 |
2021 |
|
Influence of sequential opening/closing of interface gaps and texture density on bone growth over macro-textured implant surfaces using FE based mechanoregulatory algorithm |
Computer Methods in Biomechanics and Biomedical Engineering |
72 |
2021 |
|
A Comprehensive Study of Auxiliary Arrangements for Attaining Omnidirectionality in Additive Manufacturing Machine Tools |
ASME, Manufacturing Science and Engineering |
73 |
2021 |
|
GPU-based Matrix-Free Finite Element Solver Exploiting Symmetry of Elemental Matrices |
Computing |
74 |
2021 |
|
A Single-Loop Shifting Vector Method with Conjugate Gradient Search for Reliability based-Design Optimization |
Engineering Optimization |
75 |
2021 |
|
Reference-Lines-Steered Memetic Multi-Objective Evolutionary Algorithm with Adaptive Termination Criterion |
Memetic Computing |
76 |
2021 |
|
Diversity Preference-based Many-Objective Particle Swarm Optimization Using Reference-Lines-based Framework |
Swarm and Evolutionary Computation |
77 |
2021 |
|
Reference-Lines Steered Guide Assignment and Update For Pareto-Based Many-Objective Particle Swarm Optimization |
Evolutionary Intelligence |
78 |
2021 |
|
Symbolic and Numeric Kernel Division for GPU-based FEA Assembly of Regular Meshes with Modified Sparse Storage Formats |
ASME Journal of Computing and Information Science in Engineering |
79 |
2021 |
|
GPU-based Element-by-Element Strategies for Accelerating Topology Optimization of 3D Continuum Structures Using Unstructured Mesh |
ASME Journal of Computing and Information Science in Engineering |
80 |
2021 |
|
Experimental investigation of Cu-SS electromagnetically assisted adhesive tube-to-tube joining: Its advantages over electromagnetic crimping |
International Journal of Adhesion and Adhesives |
81 |
2021 |
|
Electromagnetic Forming and Perforation of Tubes: Modeling, Simulation and Validation |
Journal of Manufacturing Science and Engineering (ASME) |
82 |
2021 |
|
Finite Element Modeling of Electromagnetic Crimping of Cu-SS Tube-to-Tube Joint Along With Simulation of Destructive Testing for Strength Prediction of the Joint |
Journal of Manufacturing Science and Engineering (ASME) |
83 |
2021 |
|
Interference-fit joining of Cu-SS composite tubes by electromagnetic crimping for different surface profiles |
Welding in the World |
84 |
2021 |
|
Loose Coupled Simulation Method for FEA of Electromagnetic Forming of Muffler |
Journal of The Institution of Engineers (India) |
85 |
2021 |
|
Effect of metal and polymer mating gears on the bending fatigue performance of asymmetric polymer gears |
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications |
86 |
2021 |
|
Comparison of the bending fatigue performances of selective laser sintered and injection moulded nylon spur gears |
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications |
87 |
2021 |
|
Modelling of minor hysteresis loop of shape memory alloy wire actuator and its application in self-sensing |
Smart Materials and Structures |
88 |
2021 |
|
Digital design computing and modelling for 3-D concrete printing |
Automation in Construction |
89 |
2021 |
|
Strength Properties of Sustainable Mortar Containing Waste Steel Slag and Waste Clay Brick: Effect of Temperature |
Materials |
90 |
2021 |
|
A Concise Review on Interlayer Bond Strength in 3D Concrete Printing |
Sustainability |
91 |
2021 |
|
Fresh and hardened properties of 3D printable polymer fibre-reinforced high-performance cementitious composite |
Advances in Cement Research |
92 |
2021 |
|
Additive Manufacturing of Sustainable Construction Materials and Form-finding Structures: A Review on Recent Progresses |
3D Printing and Additive Manufacturing |
93 |
2021 |
|
Performance of concrete beam reinforced with 3D printed Bioinspired primitive scaffold subjected to three-point bending |
Automation in Construction |
94 |
2021 |
|
Biomimicry for 3D concrete printing: A review and perspective |
Additive Manufacturing |
95 |
2021 |
|
Sustainable materials for 3D concrete printing |
Cement and Concrete Composites |
96 |
2021 |
|
In-plane energy absorption characteristics of a modified re-entrant auxetic structure fabricated via 3D printing |
Composites Part B: Engineering |
97 |
2021 |
|
A Bayesian regularization-backpropagation neural network model for peeling computations |
The Journal of Adhesion |
98 |
2021 |
|
Design to operational parameters dependency on quality factor of sensor mechanical resonators |
Journal of Gyroscopy and Navigation |
99 |
2021 |
|
Thermoelastic damping based design, sensitivity study, and demonstration of a functional hybrid gyroscope resonator for high quality factor |
Journal of Gyroscopy and Navigation |
100 |
2021 |
|
On the presence of a critical detachment angle in gecko spatula peeling - a numerical investigation using an adhesive friction model |
The Journal of Adhesion |
101 |
2021 |
|
Investigating the normal and tangential peeling behaviour of gecko spatulae using a coupled adhesion-friction model |
The Journal of Adhesion |
102 |
2021 |
|
Fretting fatigue failure in internal combustion engine components - a review and future scope |
SAE International Journal of Engines |
103 |
2021 |
|
NURBS based isogeometric analysis for stable and accurate peeling computations |
Sadhana |
104 |
2021 |
|
Activity recognition in video sequences over qualitative abstracts of a diagram-based representation schema |
Journal of Visual Communication and Image Representation |
105 |
2021 |
|
FhVLAD: Fine-grained quantization and encoding high-order descriptor statistics for scalable image retrieval. |
Multimed Tools and Applications |
106 |
2021 |
|
Modeling, Analysis, and Identification of Parallel and Angular Misalignments in a Coupled Rotor-Bearing-Active Magnetic Bearing System |
ASME, Journal of Dynamic Systems, Measurement, and Control |
107 |
2021 |
|
Dynamic analysis and identification of unbalance and misalignment in a rigid rotor with two offset discs levitated by active magnetic bearings: a novel trial misalignment approach |
Propulsion and Power Research |
108 |
2021 |
|
Finite element modelling, analysis and identification using novel trial misalignment approach in an unbalanced and misaligned flexible rotor system levitated by active magnetic |
Mechanical Systems and Signal Processing |
109 |
2021 |
|
Development of a novel approach for quantitative estimation of rotor unbalance and misalignment in a rotor system levitated by active magnetic bearings |
Iranian Journal of Science and Technology |
110 |
2021 |
|
Multi-strategy Gaussian Harris hawks optimization for fatigue life of tapered roller bearings |
Engineering with Computers |
111 |
2021 |
|
Transverse Vibration of Geared-Rotor Integrated With Active Magnetic Bearings in Identification of Multiple Faults |
ASME, Journal of Dynamic Systems, Measurement, and Control |
112 |
2021 |
|
Robust design of ball bearings for an improved performance using genetic algorithm |
International Journal for Computational Methods in Engineering Science and Technology |
113 |
2021 |
|
Identification of inlet pipe blockage level in centrifugal pump over a range of speeds by deep learning algorithm using multi-source data |
Measurement |
114 |
2021 |
|
Fault identification in cracked rotor-AMB system using magnetic excitations based on multi harmonic influence coefficient method |
Inverse Problems in Science and Engineering |
115 |
2021 |
|
Rocket nozzles: 75 years of research and development |
Sadhana |
116 |
2021 |
|
In the quest of an appropriate turbulence model for analyzing the aerodynamics of a conventional Savonius (S-type) wind rotor |
Journal of Renewable and Sustainable Energy |
117 |
2021 |
|
Increase of efficiency and reduction of CO and NOx emissions in a stationary compression ignition engine run on Mesua Ferrea linn oil-diesel and diethyl ether |
Thermal Science and Engineering Progress |
118 |
2021 |
|
Flow characterization of bluff bodies: A 2D transformation from square to triangular cylinder |
ASME Journal of Fluids Engineering |
119 |
2021 |
|
A compendium of methods for determining the exergy balance terms applied to reciprocating internal combustion engines |
ASME Journal of Energy Resources Technology |
120 |
2021 |
|
Experimental and numerical (EFG method) studies on sedimentary rock under varied salinity conditions |
International Journal of Rock Mechanics and Mining Sciences |
121 |
2021 |
|
Probabilistic failure prediction in a double composite cantilever beam with single and double source uncertainty |
Composite Structures |
122 |
2021 |
|
Mechanical properties of reservoir rock and caprock under varying brine saturation for application of geological carbon storage in deep saline aquifers |
AIP Proceedings |
123 |
2021 |
|
Experimental Investigation of Structured Packed Bed Liquid Desiccant Dehumidifier: An Optimal Mixture Design of Experiments Strategy |
Int J Refrigeration |
124 |
2021 |
|
Thermochemical energy storage system for cooling and process heating applications: A review. |
Energy Conversion and Management |
125 |
2021 |
|
Experimental Investigations on Active Solar Dryers Integrated with Thermal Storage for Drying of Black Pepper |
Renewable Energy. |
126 |
2021 |
|
Hybrid Heat Sinks for Thermal Management of Passively-Cooled Battery Chargers |
Int J of Energy Research |
127 |
2021 |
|
Experimental Study on Coupled Heat and Mass Transfer Phenomena between Air and Desiccant in a Solar Assisted Thermal Liquid Desiccant System |
Int J Thermal Sciences |
128 |
2021 |
|
Development and Performance Assessment of LPG operated Cluster Porous Radiant Burner for Commercial Cooking and Industrial Applications |
Energy |
129 |
2021 |
|
Optimization of Drilling Parameters Using Improved Play-back Methodology |
J Petroleum Science and Engineering |
130 |
2021 |
|
Thermal Integration of Proton Exchange Membrane Fuel Cell with Recuperative Organic Rankine Cycle. |
Int J Hydrogen Energy |
131 |
2021 |
|
Experimental and Numerical Investigation of Cleaner LPG Combustion in a Novel Clustered Porous Radiant Burner |
J Cleaner Production |
132 |
2021 |
|
Parametric Studies on MmNi4.7Fe0.3 based Reactor with Embedded Cooling Tubes for Hydrogen Storage and Cooling Applications |
J Energy Storage |
133 |
2021 |
|
Performance Assessments and Techno and Enviro-Economic Analyses on Forced Convection Mixed Mode Solar Dryer |
J Food Process Engineering |
134 |
2021 |
|
Compound charging and discharging enhancement in multi-PCM system using non-uniform fin distribution |
Renewable Energy. |
135 |
2021 |
|
Strategies for scaling-up LaNi5-based hydrogen storage system with internal conical fins and cooling tubes |
Int J Hydrogen Energy |
136 |
2021 |
|
Role of hybrid-nanofluid in heat transfer enhancement – A review |
Int Communications in Heat and Mass Transfer |
137 |
2021 |
|
Performance Comparison of Evacuated U-Tube Solar Collector Integrated Parabolic Reflector with Conventional Evacuated U-Tube Solar Collector |
Sadhana |
138 |
2021 |
|
Evaluation of Structural Integrity of Tubulars in Directional Wellbores: A Case Study in North-Eastern Parts of India |
|
139 |
2021 |
|
A Review on Solar Greenhouse Dryer: Design, Thermal Modelling, Energy, Economic and Environmental Aspects |
Solar Energy |
140 |
2021 |
|
Experimental and Numerical Investigations on the Charging and Discharging Performances of High-Temperature Cylindrical Phase Change Material Encapsulations |
Solar Energy |
141 |
2021 |
|
A Review on Solar Dryers Integrated with Thermal Energy Storage Units for Drying Agricultural and Food Products |
Solar Energy |
142 |
2021 |
|
Performance Studies on Mixed-Mode Forced Convection Solar Cabinet Dryer under Different Air Mass Flow Rates for Drying of Cluster Fig |
|
143 |
2021 |
|
Experimental investigations of high-temperature shell and multi-tube latent heat storage system |
Applied Thermal Engineering |
144 |
2021 |
|
Fabrication, Characterization and Evaluation of Desiccant Doped Hydrogel Films for Potential Air-Dehumidification Applications |
J Applied Polymer Science |
145 |
2020 |
Amit Prakash Ozarde, Jyotindra Narayan, Dipak Yadav, Gene H McNay, Sachin Gautam |
Optimization of Diesel Engine’s Liner Geometry to Reduce Head Gasket’s Fretting Damage |
SAE International Journal of Engines |
146 |
2020 |
Jyotindra Narayan, Santosha Kumar Dwivedy |
Towards Neuro-Fuzzy Compensated PID Control of Lower Extremity Exoskeleton System for Passive Gait Rehabilitation |
IETE Journal of Research |
147 |
2020 |
Mrinal Gupta, Jyotindra Narayan, SK Dwivedy |
Modeling of a Novel Lower Limb Exoskeleton System for Paraplegic Patients |
Springer Nature |
148 |
2020 |
U.S. Dixit, P.M. Pandey and G.C. Verma |
Ultrasonic-assisted machining processes: A review |
Ultrasonic-assisted machining processes: A review |
149 |
2020 |
S. Gouravaraju and Sachin S. Gautam |
Investigating the Influence of Geometrical and Material Parameters on Peeling Behaviour of a Gecko Spatula, Advances in Applied Mechanical Engineering |
Springer singapore |
150 |
2020 |
Gireesh Sharma N., A. George, S. P. Pandian, S. Sundararajan, Sachin S. Gautam |
Design of inertial class gyroscope resonator with ultra high quality factor for interplanetary space missions, Advances in Mechanical Engineering |
Springer |
151 |
2020 |
Arun C. Borsaikia, Anup Kumar, Amit Raj, Uday S. Dixit, |
Development of Epoxy Based Composites Using Bamboo and Waste Metal Chips, Encyclopedia of Renewable and Sustainable Materials |
Elsevier |
152 |
2020 |
Chu X, Zhang J, Dixit U.S., Gu P. |
A precise identification and matching method for customer needs based on sales data, Advances in Mechanical Design, Ed. J. Tan |
SPRINGER |
153 |
2020 |
Saurav Suman, Avinish Tiwari, Pardeep Pankaj, Biswas Pankaj, |
Modelling of welding sequences for minimization of weld induced distortions and residual stresses, Advances in Additive Manufacturing and Joining |
Springer singapore |
154 |
2020 |
Saurav Suman, Pardeep Pankaj, Avinish Tiwari, Biswas Pankaj, |
Effect of pre and post welding processes on the distortion pattern in a SAW welded butt joint of P91 steel plate, Advances in Additive Manufacturing and Joining |
Springer |
155 |
2020 |
Saurav Suman and Biswas Pankaj, |
Numerical study of welding distortion in SAW welded creep strength enhanced ferrite steel joint, Advances in Mechanical Engineering |
Springer singapore |
156 |
2020 |
Sanchit Jhunjhunwala, Jyotindra Narayan, Santosha Kumar Dwivedy |
Design and Modeling of a Novel Mechanized Injection Platform |
Proceedings of the Advances in Robotics (AIR 2019) |
157 |
2020 |
Bhaben Kalita, SK Dwivedy |
Forced Vibration Analysis of a Silk Fibre Embedded Pneumatic Artificial Muscle, RITA 2018. Lecture Notes in Mechanical Engineering |
SPRINGER singapore |
158 |
2020 |
Saurav Kumar Dutta, Annem Narayana Reddy, Santosha Kumar Dwivedy |
Direct and Inverse Problems in Force Sensing of Elastic Bodies, Emerging Trends in Mechanical Engineering. Lecture Notes in Mechanical Engineering |
SPRINGER singapore |
159 |
2020 |
S Mohanty, S Sikder, SK Dwivedy |
Non-linear Analysis of Rotational Inertial Double-Tuned Mass Damper by Harmonic Balance Method, Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering |
SPRINGER singapore |
160 |
2020 |
S Mohanty, SK Dwivedy |
Active Nonlinear Vibration Absorber for a Harmonically Excited Beam System, Nonlinear Dynamics and Control |
SPRINGER singapore |
161 |
2020 |
Sanghamitra Das, Shrikrishna N. Joshi |
Thermal Modeling and Simulation of Crater Generation on Wire Electrode During Wire EDM Operation, Advances in Simulation, Product Design and Development. Lecture Notes on Multidisciplinary Industrial Engineering |
SPRINGER singapore |
162 |
2020 |
Upasana Sarma, Shrikrishna N. Joshi |
Two-Dimensional Numerical Investigation on the Effect of Laser Parameters on Laser Indirect Machining of Glass, Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering |
SPRINGER singapore |
163 |
2020 |
Upasana Sarma, Shrikrishna N. Joshi |
Effect of Laser Parameters on Laser-Induced Plasma-Assisted Ablation (LIPAA) of Glass, Advances in Unconventional Machining and Composites. Lecture Notes on Multidisciplinary Industrial Engineering |
SPRINGER singapore |
164 |
2020 |
Jitender Kumar, Sanghamitra Das, Shrikrishna N. Joshi |
Three-Dimensional Numerical Modelling of Temperature Profiles on the Wire Electrode During Wire Electric Discharge Machining Process, Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering |
SPRINGER SINGAPORE |
165 |
2020 |
Gururaj Bolar, Shrikrishna N. Joshi |
An Experimental Investigation on Productivity and Product Quality During Thin-Wall Machining of Aluminum Alloy 2024-T351, Advances in Forming, Machining and Automation. Lecture Notes on Multidisciplinary Industrial Engineering. |
SPRINGER singapore |
166 |
2020 |
Kashyap, D., Dass, A.K. |
Analysis of Heat Transfer and Entropy Generation During Natural Convection in a Cu–Water Nanofluid-Filled Porous Cavity for Different Thermal Boundary Conditions, Advances in Energy Research, Vol. 1. Springer Proceedings in Energy |
Springer singapore |
167 |
2020 |
Mukesh Kumar, Dhirendra Kumar Verma, Poonam Kumari |
The Synthesis, Characterization and performance of Piezoelectric P (VDF-TrFE) Electrospun Nanofibers |
International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 2019), IIT Indore. |
168 |
2020 |
Ram Krishna Yadav, Agyapal Singh and Poonam Kumari |
Free Vibration Analysis of Elastic Laminated Plate under Cylindrical Bending using Extended Kantorovich Method |
4th Indian Conference on Applied Mechanics (INCAM), July 3-5, 2019 at IISc Bangalore |
169 |
2020 |
Sunku Prasad J, Sayantan Jana, Viswa I, Muthukumar P |
Experimental Investigation on Absorption and Desorption characteristics of La0.9Ce0.1Ni5 alloy for Hydrogen Storage Application |
International Conference on Innovations in Thermo-Fluid Engineering and Sciences [ICITFES-2020], February 10-12, 2020 at National Institute of Technology, Rourkela, Odisha, India. |
170 |
2020 |
Alok Kumar, Nithin N. Raju, Muthukumar P |
Parametric Studies on MmNi4.7Fe0.3 based Reactor with Embedded Cooling Tubes for Hydrogen Storage and Cooling Application. |
International Conference on Innovations in Thermo-Fluid Engineering and Sciences [ICITFES-2020], February 10-12, 2020 at National Institute of Technology, Rourkela, Odisha, India. |
171 |
2020 |
Sangjukta Devi, Niranjan Sahoo, Muthukumar P |
Effect of Combustion Zone Material on the Thermal Performance of Biogas Fuelled Porous Media Burner: Experimental Studies. |
|
172 |
2020 |
Mrinal Bhowmik, Anandalakshmi R, Muthukumar P |
Modelling and Multi-Objective Optimization of Performance Parameters for Counter Flow Dehumidifier |
International Conference on Innovations in Thermo-Fluid Engineering and Sciences [ICITFES-2020], February 10-12, 2020 at National Institute of Technology, Rourkela, Odisha, India. |
173 |
2020 |
Arun Kumar M. Lav K Kaushik, Muthukumar P |
Critical Analysis on Unstable Operation of a Self -aspirated Cook-stove with Porous Radiant Burner |
|
174 |
2020 |
Pratibha Maurya, Arun Kumar M. Lav K Kaushik, Muthukumar P, |
Comparative Performance Assessments of Canister based Methanol Cook-stove with Kerosene Wick Cook-stove for Domestic Cooking Application |
International Conference on Innovations in Thermo-Fluid Engineering and Sciences [ICITFES-2020], February 10-12, 2020 at National Institute of Technology, Rourkela, Odisha, India. |
175 |
2020 |
Partha Pratim Kemprai, Ranganayakulu C, Muthukumar P |
Numerical and Experimental Investigation in Compact Heat Exchanger Surfaces with Wavy Fins |
|
176 |
2020 |
Lav K. Kaushik, Gyan S. Sinha, Muthukumar P |
Assessment of Waste Cooking Oil Combustion in a Porous Kerosene Pressure Cook-stove (PKPCs). |
|
177 |
2020 |
Mrinal Bhowmik, M. Joshi, R. Anandalakshmi, Muthukumar P |
Performance Investigations on Twist Tape Based U-Tube Solar Evacuated Tube Collector for Humid Subtropical Region. |
25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), December 28-31, 2019, IIT Roorkee, Roorkee. |
178 |
2020 |
Kiran Naik K, Muthukumar P, Mrinal Bhowmi |
Performance Assessment and Comparison of Desiccant Coated Heat Exchanger Type and Desiccant Wheel Type Dehumidification systems |
25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), December 28-31, 2019, IIT Roorkee, Roorkee. |
179 |
2020 |
Jasinta Poonam Ekka, Krishnendu Bala, Muthukumar P |
Drying Kinetics of Yellow Turmeric in a Solar Dryer with and without Solar Air Collector under Forced Circulation |
|
180 |
2020 |
S. Devi, N. Sahoo and P. Muthukumar |
Impact of preheat zone properties on the flammability limits of crude biogas combustion in a two-layer porous radiant burner |
International Conference on Thermo-Fluids And Energy Systems, 27-28th December 2019, Bangalore, India. |
181 |
2020 |
S. Devi, N. Sahoo and P. Muthukumar |
Experimental analysis of biogas combustion with different foam materials in a porous media burner. |
ASME 2019 Gas Turbine India GTIndia2019, December 5-6, 2019, IIT Madras, Chennai, India |
182 |
2020 |
Kaushik L K, Arun Kumar M. Muthukumar P |
Performance Analysis of a Bio-gas operated Porous Radiant Burner for Domestic Cooking Application |
11th International Exergy, Energy and Environment Symposium (IEEES-11), July 14-18, 2019, Chennai, India |
183 |
2020 |
Kiran Naik B and Muthukumar P |
Parametric Studies and Performance Investigation on Novel Multipurpose Liquid Desiccant Drying/Desalination System |
International Conference on Polygeneration (ICP-2019), May 15-17, Kyushu University, Japan. |
184 |
2020 |
Mrinal Bhowmi K, Kiran Naik B, Anandalakshmi R, Muthukumar P |
Experimental Investigations of the Dehumidifier Performance Evaluation using Aqueous LiBr-HCOOK Blend |
International Conference on Polygeneration (ICP-2019), May 15-17, Kyushu University, Japan. |
185 |
2020 |
Sunku Prasad J, Sayantan Jana, Muthukumar P |
Thermodynamic Studies on Metal Hydride based Tri-generation System for Cooling, Thermal Storage and Thermal Upgradation |
International Conference on Polygeneration (ICP-2019), May 15-17, Kyushu University, Japan. |
186 |
2020 |
Vigneshwaran K, Gurpreet Singh Sodhi, Muthukumar, P, Senthilmurugan S |
concrete based Sensible Heat Storage System: Experimental Investigations. Presented at International Conference on Polygeneration |
International Conference on Polygeneration (ICP-2019), May 15-17, Kyushu University, Japan. |
187 |
2020 |
Desai F J Atayo A, Muthukumar P, Rahman MM |
Experimental Studies on Endothermic Reversible Reaction of Salts for Cooling |
International Conference on Polygeneration (ICP-2019), May 15-17, Kyushu University, Japan. |
188 |
2020 |
Ankit Agrawal, Divyeshkumar D. Kansagara, Deepak Sharma, and Ujjwal K. Saha |
Savonius Wind Turbine Blade Profile Optimization by Coupling CFD Simulations with Simplex Search Technique |
ASME 2019 Gas Turbine India Conference, December 5–6, 2019 Chennai, Tamil Nadu, India. Paper No: GTINDIA2019-2442, V002T06A007; 12 pages. |
189 |
2020 |
Raktim Biswas Deepak Sharma |
A Single-Loop Reliability-based Design Optimization Method Using Iteratively Updating Hessian |
EUROGEN 2019, University of Minho, Guimarães, Portugal, September 12 – 14, 2019 |
190 |
2020 |
Utpal Kiran, Vishal Agrawal, Deepak Sharma and Sachin Singh Gautam |
A GPU based acceleration of Finite Element and Isogeometric analysis |
Proceedings at the 10th International Conference on Computational Methods (ICCM2019), 9–13 July 2019, Singapore, Eds: G.R. Liu, Fangsen Cui, George Xu Xiangguo, ScienTech Publisher, pp. 641 – 651. |
191 |
2020 |
Subhajit Sanfui and Deepak Sharma |
Exploiting Symmetry in Elemental Computation and Assembly Stage of GPU-Accelerated FEA |
Proceedings at the 10th International Conference on Computational Methods (ICCM2019), 9–13 July 2019, Singapore, Eds: G.R. Liu, Fangsen Cui, George Xu Xiangguo, ScienTech Publisher, pp. 641 – 651. |
192 |
2020 |
Sarma, B., Shahapure, V., Dalal, A., and Basu, D. N. |
Magnetowetting Dynamics of Sessile Ferrofluid Drops on Soft Surfaces |
Soft Matter |
193 |
2020 |
A. Mukherjee, D. N. Basu and P. K. Mondal |
Simulation of Periodic Bubble Nucleation, Growth and Departure in Nucleate Pool Boiling |
25th National and 3rd International ISHMTASTFE Heat and Mass Transfer Conference |
194 |
2020 |
S. Shyam, B. Mehta, P. K. Mondal and M. Asfer |
Internal Flow Dynamics of Ferrofluid Droplet Under the Influence of Magnetic Field |
25th National and 3rd International ISHMTASTFE Heat and Mass Transfer Conference |
195 |
2020 |
S. H. Mullick, P. Kaushik, P. K. Mondal, P. K. Kundu |
Entropy Generation in a Viscoelastic Fluid Squeezed and Extruded Between Two Parallel Plates |
25th National and 3rd International ISHMTASTFE Heat and Mass Transfer Conference |
196 |
2020 |
Ashutosh Kumar, S K Kakoty |
Analysis of Static and Dynamic Performance Parameters of Two-Lobe Journal Bearing Operating With Non-Newtonian Lubricant |
ASME Gas Turbine India Conference 2019 |
197 |
2020 |
K K Basumatary, S K Kakoty, M Ghosh |
Effect of sinusoidal and non-sinusoidal periodic forces on the stability of Gas Foil Bearing |
6th National Symposium on Rotor Dynamics, CSIR-National Aerospace Laboratories, Bangalore |
198 |
2020 |
R. Umesh, B. S. Sikarwar, and Sachin S. Gautam |
Thermal Management of The Lithium-Ion Battery System for Electric Vehicles |
Indo-Japan 2nd Indo Japan Bilateral Symposium on Futuristic Materials and Manufacturing for Next Generation Electric Vehicles and High Speed Railway, IIT Madras, Chennai, |
199 |
2020 |
A Gupta, S Panda and R S Reddy |
Design of graded laminated composite beam under moving load |
Materials Today: Proceedings |
200 |
2020 |
Karunakaran, K. P., Seema Negi, Arun Nambolan, Ashik Patel, Yogesh Patil, Milan Pandya, Sajan Kapil, Dmitriy Trushnikov, Michael Sealy, and Alain Bernard. |
Path Planning Challenges of HED Beams |
IOP Conference Series: Materials Science and Engineering, 759 (1) |
201 |
2020 |
A Gupta, R S Reddy, S Panda and N Kumar |
Damping treatment of beam with unconstrained/constrained 1-3 smart viscoelastic composite layer |
Materials Today: Proceedings |
202 |
2020 |
Ranjeet Kumar Bhagchandani, Rohan Ghodke, R Manivannan, Seema Negi, Sajan Kapil, KP Karunakaran |
Characterization of Rapid Foam Castings Produced by Different Mold Making Processes |
Advances in Additive Manufacturing and Joining, Springer, Singapore |
203 |
2020 |
A. Kumar and S. K. Kakoty |
Effect of Couple Stress Parameter on Steady State and Dynamic Characteristics of Three-Lobe Journal Bearing Operating on TiO2 Nanolubricant |
Journal of Engineering Tribology, |
204 |
2020 |
A Kumar and S K Kakoty |
Effect of couple-stress parameter on the steady state performance parameters of two-lobe journal bearing operating with non-Newtonian lubricant |
Materials Today: Proceedings |
205 |
2020 |
Chu X, Zhang J, Dixit U.S., Gu P. |
A precise identification and matching method for customer needs based on sales data. |
Proceedings of the International Conference of Mechanical Design & The 20th Mechanical Design Biennial Conference, August 12-14, Huzhou, Zhejiang, China. (Published in Advances in Mechanical Design, edited by J. Tan, Springer 2020). |
206 |
2020 |
Jyotindra Narayan, Arjun Pardasani, Santosha K Dwivedy |
Comparative Gait Analysis of Healthy Young Male and Female Adults using Kinect-Labview Setup |
2020 International Conference on Computational Performance Evaluation (ComPE) |
207 |
2020 |
Seema Negi, Sajan Kapil, Arun Sharma, Priyanka Choudhary, Parag Bhargava, KP Karunakaran |
Retrofitment of Laser Cladding System with CNC Machine for Hybrid Layer Manufacturing |
Advances in Additive Manufacturing and Joining, Springer, Singapore |
208 |
2020 |
Bhaben Kalita, Jyotindra Narayan, Santosha Kumar Dwivedy |
Development of Active Lower Limb Robotic-Based Orthosis and Exoskeleton Devices: A Systematic Review |
International Journal of Social Robotics |
209 |
2020 |
U Talukdar, Shyamanta M Hazarika, John Q Gan |
Adaptation of Common Spatial Patterns based on mental fatigue for motor-imagery BCI. |
Biomedical Signal Processing and Control |
210 |
2020 |
Srinivas R Gorthi, Pranab Kumar Mondal, Gautam Bisaws and Kirti Sahu |
Electro-capillary filling in a microchannel under the influence of magnetic and electric fields |
Canadian Journal of Chemical Engineering |
211 |
2020 |
K. P. Karunakaran, Seema Negi, Sajan Kapil, Prathamesh Shreekant Joshi, and Arun Athul |
Energy Beam Laminated Manufacturing |
|
212 |
2020 |
Jyotindra Narayan, Shivansh Mishra, Gaurav Jaiswal, Santosha K Dwivedy |
Novel design and kinematic analysis of a 5-DOFs robotic arm with three-fingered gripper for physical therapy |
Materials Today: Proceedings |
213 |
2020 |
S.Shyama, M. Asfer, B. Mehta, P. K.Mondal and Z. A. Almutairid |
Magnetic field driven actuation of sessile ferrofluid droplets in the presence of a time dependent magnetic field |
Colloids and Surfaces A: Physicochemical and Engineering Aspects |
214 |
2020 |
K K Basumatary, G Kumar, K Kalita, and S K Kakoty |
Stability Analysis of Rigid Rotors Supported by Gas Foil Bearings Coupled with Electromagnetic Actuators |
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science |
215 |
2020 |
Jyotindra Narayan, Sanchit Jhunjhunwala, Mrinal Gupta, Santosha K Dwivedy |
Backpropagation Neural Network Based Design of a Novel Sit-to-Stand Exoskeleton at Seat-Off Position for Paraplegic Children |
2020 6th International Conference on Control, Automation and Robotics (ICCAR) |
216 |
2020 |
R Bhattacharyya, Shyamanta M Hazarika |
A knowledge-driven layered inverse reinforcement learning approach for recognizing human intents. |
Journal of Experimental & Theoretical Artificial Intelligence |
217 |
2020 |
Sagar Pawar, Sachin D Kore, Arup Nandy |
Comparison of Sheared Edge Zones Developed in Electromagnetic and Quasistatic Dieless Perforation |
J. of Materi Eng and Perform |
218 |
2020 |
A. Raj, A. Ch. Borsaikia and U.S. Dixit |
Bond strength of Autoclaved Aerated Concrete (AAC) masonry using various joint materials |
Journal of Building Engineering |
219 |
2020 |
A. Singh, P. Bind, P. Kumari |
2D free vibration solution of the hybrid piezoelectric laminated beams using extended Kantorovich method |
Journal of The Institution of Engineers (India): Series C |
220 |
2020 |
Fenil D, Asonganyi A, Sunku Prasad J, Muthukumar P, Muhammad R, Eylem A |
Experimental Studies on Endothermic Reversible Reaction of Salts for Cooling |
Heat Transfer Engineering. |
221 |
2020 |
J. Zhang, M. Wu, Q. Peng, U.S. Dixit and P. Gu |
Design for interface stiffness of mechanical products using integrated simulation and optimization under uncertainty |
ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems Part B: Mechanical Engineering |
222 |
2020 |
Jasinta P Ekka, Krishnendu B, Muthukumar P, Dipak Kumar K |
Performance analysis of a forced convection mixed mode horizontal solar cabinet dryer for drying of black ginger (Kaempferia parviflora) using two successive air mass flow rates. |
Renewable Energy |
223 |
2020 |
Mrinal Bhowmik, Muthukumar P, Anandalakshmi R |
Experimental based multilayer perceptron approach for prediction of evacuated solar collector performance in humid subtropical regions |
Renewable Energy |
224 |
2020 |
P. K. Bannaravuri, A. K. Birru and U. S. Dixit |
Effect of laser surface melting on the surface integrity of aluminium composites |
Transactions of Nonferrous Metals Society of China |
225 |
2020 |
Suman Saurav, Sridhar P. V. S. S., Biswas Pankaj, Deepjyoti Das |
Prediction of welding induced distortions in large weld Structure through Improved Equivalent Load Method Based on Average Plastic Strains |
Welding in the World |
226 |
2020 |
S. K. Barik, N. Sahoo and N. Rajaura |
Deformation assessment of stainless steel sheet using a shock tube (Chapter 9) |
IGI Global Publisher (USA) |
227 |
2020 |
Atul K Soti, Ashoke De |
Vortex-induced Vibrations of a Confined Circular Cylinder for Efficient Flow Power Extraction |
Physics of Fluids |
228 |
2020 |
Ashirbad Jana, S. Senthilvelan and S. Kanagaraj. |
Orbital bearing machine (OBM) simulator attachable to pin-on-disc device for pre-clinical testing of prosthetic hip joints |
|
229 |
2020 |
Deka, H., Biswas, G., Dalal, A. |
A Coupled Level Set and Volume-of-Fluid Method for Modeling Two-Phase Flows |
Springer |
230 |
2020 |
Prakash Kumar Sahu, Jayashree Das, Gaoqiang Chen, Qu Liu, Sukhomay Pal, Shenbo Zeng, Qingyu Shi |
Friction stir selective alloying of different Al% particulate reinforced to AZ31 Mg for enhanced mechanical and metallurgical properties |
Journal of Materials Science and Engineering: A |
231 |
2020 |
V. Kumar and U.S. Dixit |
Estimation of temperature-dependent yield strength and modulus of elasticity during laser bending |
Measurement |
232 |
2020 |
A. Kamal, V. Kulkarni and N. Sahoo |
Measurement of strain using strain gauge and piezoelectric sensors (Chapter 6) |
IGI Global Publisher (USA) |
233 |
2020 |
Pandey, V., Deka, H., Biswas, G., and Dalal, A. |
Dynamics of Growth and Break-up of an Evaporating Pendant Drop |
ASME Journal of Heat Transfer |
234 |
2020 |
Mishra R., Soti A. K., Thompson, M. C., Bhardwaj R., Kukarni S. S. |
Vortex-induced vibration of a circular cylinder on viscoelastic support at low Reynolds number |
Journal of Fluid and Structures |
235 |
2020 |
S. Brahmachary, G. Natarajan, V. Kulkarni, and N. Sahoo |
A sharp-interface Immersed Boundary method for high-speed compressible flows |
Springer Nature |
236 |
2020 |
Muthukumar P, L K Kaushik, Arun Kumar M |
Eco-Friendly and Energy-Efficient LPG Cooking Stove With Naturally-Aspirated Porous Radiant Burner For Commercial Kitchens. |
|
237 |
2020 |
Muthukumar P, L K Kaushik |
Energy Efficient and Eco-Friendly Domestic LPG Cooking Stove with A Two-Layer Porous Radiant Burner |
|
238 |
2020 |
A. Gagoi, A. Reddy Katha and P. K. Mondal |
Influence of the Presence of the Cations on the Water and Salt Dynamics Inside Layered Graphene Oxide (GO) Membranes |
Nanoscale (Royal Society of Chemistry) |
239 |
2020 |
A. Jat and Tiwari R. |
Multi-Objective Optimization of Spherical Roller Bearings Based on Fatigue and Wear Using Evolutionary Algorithm |
Journal of King Saud University – Engineering Sciences |
240 |
2020 |
A. Raj, A. Ch. Borsaikia and U.S. Dixit |
Evaluation of mechanical properties of autoclaved aerated concrete (AAC) block and its masonry |
Journal of Institution of Engineers (India), Series A |
241 |
2020 |
Bukke Kiran Naik, Muthukumar P |
Parametric and Performance Investigations on Novel Multipurpose Liquid Desiccant Drying/Desalination System. |
Heat Transfer Engineering |
242 |
2020 |
Chilaka RCR, Vigneshwaran K, Hakeem Niyas, Muthukumar, P |
Performance investigation of lab-scale sensible heat storage prototypes, Article in Press |
Int Journal Green Energy |
243 |
2020 |
H Basumatary, Shyamanta M Hazarika |
State of the Art in Bionic Hands. |
IEEE Transactions on Human-Machine Systems |
244 |
2020 |
Kiran Naik, Bharat Singh, Neelam Dutta, Senthilmurugan S. Muthukumar P |
Fluid to liquid membrane energy exchanger for simultaneous liquid desiccant regeneration and desalination applications–Theoretical and experimental analyses. |
Energy Conversion and Management |
245 |
2020 |
Mrinal Bhowmik Anandalakshmi R, Muthukumar P |
Numerical Investigation of Performance Trade-Off Characteristics of a Packed Bed Dehumidifier using Aqueous Blends of Lithium Chloride and Calcium Chloride |
Heat and Mass Transfer |
246 |
2020 |
Sajan Kapil, Fisseha Legesse, Seema Negi, K. P. Karunakaran, and Swarup Bag |
Hybrid layered manufacturing of a bimetallic injection mold of P20 tool steel and mild steel with conformal cooling channels |
Progress in Additive Manufacturing |
247 |
2020 |
Sangjukta Devi, Niranjan Sahoo and P. Muthukumar |
Experimental studies on biogas combustion in a novel double layer inert porous radiant burner |
Renewable Energy |
248 |
2020 |
Sunku Prasad J, Anandalakshmi R, Muthukumar P |
Numerical Investigation on Conventional and PCM Heat Sinks under Constant and Variable Heat Flux Conditions. |
Clean Technologies and Environmental Policy. |
249 |
2020 |
S Jain and U K Saha |
Capturing the dynamic stall in H-type Darrieus wind turbines using different URANS turbulence models |
ASME Journal of Energy Resources Technology |
250 |
2020 |
A Chanda, SK Dwivedy |
A Study of Nonlinear Behavior of Flexible Tool and Workpiece in Turning Operation With Regenerative Effect Under Internal and Primary Resonance Conditions |
ASME, Journal of Computational and Nonlinear Dynamics |
251 |
2020 |
K. K. Selvakumar, P. S. Balaji and N. Sahoo |
Introduction to stress-strain relationship and its measurement techniques (Chapter 2) |
IGI Global Publisher (USA) |
252 |
2020 |
Mohamed Abbas, Jyotindra Narayan, Sashwata Banerjee, Santosha K Dwivedy |
AlexNet based Real-Time Detection and Segregation of Household Objects using Scorbot |
2020 4th International Conference on Computational Intelligence and Networks (CINE) |
253 |
2020 |
Upasana Sarma, Shrikrishna N. Joshi |
Machining of micro-channels on polycarbonate by using Laser-Induced Plasma Assisted Ablation (LIPAA) |
Optics & Laser Technology |
254 |
2020 |
Behera S., Kumari P |
Free Vibration Analysis of Levy-Type Smart Hybrid Plates Using Three-Dimensional Extended Kantorovich Method |
Springer |
255 |
2020 |
A Karthik Pandian, Sachin Singh Gautam, S Senthilvelan |
Experimental and numerical investigation of the bending fatigue performance of symmetric and asymmetric polymer gears |
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications |
256 |
2020 |
Sanjay Raj, Pardeep Pankaj, and Pankaj Biswas |
Microstructure and Mechanical Characterization of Friction Stir Welded Inconel 718 Alloy, |
International Conference on Recent Developments in Mechanical Engineering| ICRAME 2020, 07-09 February 2020, NIT Silchar, India. |
257 |
2020 |
Dhara L. N., Pankaj P., Biswas P., |
Influence of Heat Input on Weld Bead Geometry in Metal Inert Gas Welded Thick P91 Steel |
International Conference on Recent Developments in Mechanical Engineering| ICRAME 2020, 07-09 February 2020, NIT Silchar, India. |
258 |
2020 |
Pardeep Pankaj, Abhishek Bhardwaj, Avinish Tiwari, Lakshmi Narayan Dhara and Pankaj Biswas, |
Numerical study on Material Flow Behaviour in Friction Stir Welding of Low Carbon Steel, |
International Conference on Recent Developments in Mechanical Engineering| ICRAME 2020, 07-09 February 2020, NIT Silchar, India. |
259 |
2020 |
U Talukdar, Shyamanta M Hazarika, John Q Gan |
Adaptive feature extraction in EEG-based motor imagery BCI: tracking mental fatigue. |
Journal of Neural Engineering |
260 |
2020 |
Sanghamitra Das, Shrikrishna N. Joshi |
Estimation of wire strength based on residual stresses induced during wire electric discharge machining |
Journal of Manufacturing Processes |
261 |
2020 |
Agyapal Singh and Poonam Kumari |
Analytical free vibration solution for angle-ply piezolaminated plate under cylindrical bending: A piezo-elasticity approach |
Advances in Computational Design |
262 |
2020 |
Anil Kumar Rout, Niranjan Sahoo and Pankaj Kalita |
Effectiveness of coaxial surface junction thermal probe for transient measurements through laser based heat flux assessment |
Heat and Mass Transfer |
263 |
2020 |
G. C. Subramaniam and P. K. Mondal |
Effect of Couple Stresses on the Rheology and Dynamics of Linear Maxwell Viscoelastic Fluids |
Physics of Fluids |
264 |
2020 |
Kashyap D, Gaur SS, Kanagaraj S |
Development of hybrid shape memory polyurethane composites for endovascular applications. |
Materials Today Communications |
265 |
2020 |
Naskar S, Panda AK, Jana A, Kanagaraj S, Basu B. |
UHMWPE-MWCNT-nHA based hybrid trilayer nanobiocomposite: Processing approach, physical properties, stem/bone cell functionality, and blood compatibility. |
J Biomed Mater Res.Part B Applied Bjiomaterials |
266 |
2020 |
P. K. Mondal and S. Wongwises |
Magneto-Hydrodynamic (MHD) Micropump of Nanofluids in a Rotating Microchannel under Electrical Double Layer Effect |
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering |
267 |
2020 |
Pardeep Pankaj, Avinish Tiwari, Pankaj Biswas, A. Gourav Rao & Sukhomay Pal |
Experimental studies on controlling of process parameters in dissimilar friction stir welding of DH36 shipbuilding steel˗AISI 1008 steel |
Welding in the World |
268 |
2020 |
Santosh Kumar Hotta, Niranjan Sahoo, Kaustubha Mohanty and Vinayak Kulkarni |
Ignition timing and compression ratio as effective means for the improvement in the operating characteristics of a biogas fueled spark ignition engine |
Renewable Energy |
269 |
2020 |
Saurav Suman, Pankaj Biswas |
Comparative Study on SAW Welding Induced Distortion and Residual Stresses of CSEF Steel Considering Solid State Phase Transformation and Preheating |
Journal of Manufacturing Processes |
270 |
2020 |
Saurav Suman, Pankaj Biswas, S. K. Patel, V. P. Singh, Akhileshwar Nirala, Basil Kuriachen, |
Measurement of Residual Stresses in Submerged Arc Welded P91 Steel Using Surface Deformation |
Materials Todays- proceedings |
271 |
2020 |
Shranish Kar, Poonam Kumari |
Three-dimensional analytical solution of arbitrarily supported cylindrical panels with weak interfaces using the extended Kantorovich method |
Composite Structures |
272 |
2020 |
A Sarkar and U K Saha |
Assessment of dual fuel diesel engine performance by modulating biogas flowrate and intake charge preheating |
International Journal of Ambient Energy |
273 |
2020 |
S. Sajith, K.S.R.K. Murthy and P.S. Robi |
Mixed mode fatigue crack growth studies in AISI 316 stainless steel |
European Journal of Mechanics / A Solids |
274 |
2020 |
S. Sajith, K.S.R.K. Murthy and P.S. Robi |
Experimental and numerical investigation of mixed mode fatigue crack growth models in aluminum 6061-T6 |
International Journal of Fatigue |
275 |
2020 |
Sanasam Sunderlal Singh, Alika Khare, Shrikrishna N. Joshi |
Fabrication of microchannel on polycarbonate below the laser ablation threshold by repeated scan via the second harmonic of Q-switched Nd:YAG laser |
SME Journal of Manufacturing Processes |
276 |
2020 |
Pandey, V., Biswas, G., Dalal, A |
Study of Pool Boiling Through Numerical Approach, In: Runchal, A. (ed), 50 Years of CFD in Engineering Sciences. A Commemorative Volume in Memory of D. Brian Spalding |
Springer |
277 |
2020 |
K. K. Selvakumar, N. Sahoo and B. Selvaraj |
Introduction to basics of stress (Chapter 1) |
IGI Global Publisher (USA) |
278 |
2020 |
A. K. Rout, N. Sahoo and V. Kulkarni |
An overview of stress and strain measurement technique (Chapter 3) |
IGI Global Publisher (USA) |
279 |
2020 |
S. Shyam, P. K. Mondal and B. Mehta |
Thermal energy management strategy of the photovoltaic cell using Ferromagnetohydrodynamics |
Springer |
280 |
2020 |
A.N. Reddy, Saruav Kumar Dutta, B. Sandeep Reddy, S.K. Dwivedy |
Bistable Compliant Gripper for Pipe Climbing Robot |
|
281 |
2020 |
S. K. Hotta, A. K. Rout and N. Sahoo |
Effect of compression ratio on the thermal efficiency and cycle by cycle variation of a raw biogas operated spark ignition engine, International Conference on Thermofluids |
KIIT University, Bhubaneswar, India, 23-24 January |
282 |
2020 |
S. Kirtania and D. Chakraborty |
Finite Element based Studies on Elastic Properties of Carbon Nanotube-Reinforced Metal Matrix Composites |
International Conference on Advancements in Mechanical Engineering(ICAME 2020), Aliah University, Kolkata, 16-18 January 2020 |
283 |
2020 |
Pallekonda R. B., Nanda S. R., Dwivedy S. K. |
Application of Neural-Networks and Neuro-Fuzzy Systems for the Prediction of Short Duration Forces Acting on the Blunt Bodies |
Soft Computing |
284 |
2020 |
Sureandhar G, Srinivasan G, Muthukumar P, Senthilmurugan S |
Performance evaluation of solar air heater having arc-shaped wire rib with varying roughness height on absorber plate. |
International Conference on Innovations in Thermo-Fluid Engineering and Sciences [ICITFES-2020], February 10-12, 2020 at National Institute of Technology, Rourkela, Odisha, India. |
285 |
2020 |
Lakshmi DVN, Muthukumar P |
Energy and Environmental Analyses of Active Solar Dryer for Medicinal Herbs Drying. |
|
286 |
2020 |
S. K. Barik, R. G. Narayanan and N. Sahoo |
Forming response of AA5052-H32 sheet deformed using a shock tube |
Transactions of Nonferrous Metals Society of China |
287 |
2020 |
S. Pandian, S. L. N. Desikan and Sahoo Niranjan |
Onset of cavity oscillation from transverse to longitudinal mode in a supersonic flow |
ASME Journal of Fluids Engineering |
288 |
2020 |
S. Pandian, S. L. N. Desikan and Sahoo Niranjan |
Non-linear characteristics of a rectangular cavity in supersonic flow |
AIAA Journal |
289 |
2020 |
Satyaki Chandra, Pratibha Sharma, Muthukumar P, Sankara Sarma VT |
Modeling and numerical simulation of a 5 kg LaNi5-based hydrogen storage reactor with internal conical fins. |
Int J Hydrogen Energy |
290 |
2020 |
Saurav Suman, Pankaj Biswas and Avinish Tiwari |
Microstructure Evolution and Mechanical Behaviour of SAW Welded CSEF Steel on Preheating and PWHT, |
Transactions of the Indian Institute of Metals |
291 |
2020 |
Saurav Suman, Biswas Pankaj, Basil Kuriachen and Abhijit Sinha |
Thermo-mechanical study of single and multi-pass welding of CSEF steel for residual stresses and deformations considering solid state phase transformation |
Materials Todays- proceedings |
292 |
2020 |
S Jain and U K Saha |
The state-of-the-art technology of H-type Darrieus wind turbine rotors |
ASME Journal of Energy Resources Technology |
293 |
2020 |
Bhaben Kalita and S. K. Dwivedy |
Numerical Investigation of Nonlinear Dynamics of a Pneumatic Artificial Muscle With Hard Excitation |
ASME, Journal of Computational and Nonlinear Dynamics |
294 |
2020 |
S. Pawar, S.D. Kore, and A. Nandy |
Recent Advancement in Electromagnetic Forming Processes |
1st International Conference on Recent Developments in Mechanical Engin |
295 |
2020 |
S. Devi, N. Sahoo and P. Muthukumar |
Effect of combustion zone material on the thermal performance of biogas fueled porous media burner: Experimental studies |
International Conference on Innovations in Thermo-Fluid Engineering and Sciences [ICITFES - 2020], NIT Rourkela, India, 10-12 February |
296 |
2019 |
O. Siram and N. Sahoo |
Experimental study on horizontal axis wind turbine wakes for wind farm modelling |
Proceedings of 25TH National and 3RD International ISHMT-ASTFE Heat and Mass Transfer Conference, IIT Roorkee, India, 28-31 December |
297 |
2019 |
A. K. Rout, N. Sahoo, P. Kalita and V. Kulkarni |
Design and installation of a shock tube for ignition delay based studies |
Proceedings of 25TH National and 3RD International ISHMT-ASTFE Heat and Mass Transfer Conference, IIT Roorkee, India, 28-31 December |
298 |
2019 |
A. Kamal, V. Kulkarni and N. Sahoo |
A new calibration approach for prediction of aerodynamic coefficients for hypersonic applications |
Proceedings of 25TH National and 3RD International ISHMT-ASTFE Heat and Mass Transfer Conference, IIT Roorkee, India, 28-31 December |
299 |
2019 |
Sangjukta Devi, Niranjan Sahoo, Muthukumar P |
Impact of preheat zone properties on the flammability limits of crude biogas combustion in a two-layer porous radiant burner |
International Conference on Thermo-Fluids and Energy Systems, Bangalore, Karnataka, India, 27-28 December |
300 |
2019 |
Muthukumar P, L K Kaushik, Sangjukta Devi, Arun Kumar M. |
Biogas Operated Domestic Cook Stove with Naturally Aspirated Porous Radiant Burner. |
|
301 |
2019 |
Kataky, P. K., Dalal, A., Biswas, G., and Wang, C-T |
Numerical simulation of three-dimensional microbial fuel cell |
International Conference on Sustainable Energy and Green Technology, Bangkok, Thailand |
302 |
2019 |
Anshul Garg and Santosha K. Dwivedy |
Piezoelectric energy harvester under parametric excitation: A theoretical and experimental investigation |
Journal of Intelligent Material Systems and Structures |
303 |
2019 |
O. Siram and N. Sahoo |
Characterizing the helical vortex frequency of HAWT |
Proceedings of 7TH International Conference on Advances in Energy Research, IIT Bombay, Mumbai, India, 10-12 December |
304 |
2019 |
S. K. Barik, R.G. Narayanan and N. Sahoo |
Prediction of high-velocity forming behavior of AA 5052-H32 pre-strained sheet |
Proceedings of 64TH Congress of the Indian Society of Theoretical and Applied Mechanics (ISTAM 2019), IIT Bhubaneswar, 10-12 December |
305 |
2019 |
A. K. Rout, S. K. Hotta, N. Sahoo, P. Kalita and V. Kulkarni |
Validation for fast response characteristics of a coaxial thermal probe in an IC engine bases experiment |
Proceedings of 7TH International Conference on Advances in Energy Research, IIT Bombay, Mumbai, India, 10-12 December |
306 |
2019 |
Talukdar U., Barua R., Hazarika S.M. |
Augmenting a Description Logic with Probability for Motion Patterns Within QSTR. |
Springer, Singapore |
307 |
2019 |
K. K. Selvakumar, V. Kulkarni and N. Sahoo |
Investigation on flow characteristics and performance of a vertical axis wind turbine with deflector plates |
Proceedings of ASME Gas Turbine India Conference, IIT Madras, Chennai, India, 5-6 December |
308 |
2019 |
O. Siram and N. Sahoo |
Near wake regime study on wind turbine blade tip vortex |
Proceedings of ASME Gas Turbine India Conference, IIT Madras, Chennai, India. 5-6 December |
309 |
2019 |
A. K. Rout, N. Sahoo, P. Kalita and V. Kulkarni |
Transient response characteristics of a surface junction probe |
Proceedings of ASME Gas Turbine India Conference, IIT Madras, Chennai, India, 5-6 December |
310 |
2019 |
A. Kamal, G. C. Das, V. Kulkarni and N. Sahoo |
Comparative study of force prediction techniques using multi-component accelerometer force balance for high enthalpy ground testing |
Proceedings of ASME Gas Turbine India Conference, IIT Madras, Chennai, India, 5-6 December |
311 |
2019 |
S. Devi, N. Sahoo and P. Muthukumar |
Experimental analysis of biogas combustion with different foam materials in a porous media burner |
Proceedings of ASME Gas Turbine India Conference, IIT Madras, Chennai, India, 5-6 December |
312 |
2019 |
VA. Raj, A. Ch Borsaikia and U.S. Dixit |
Physical and mechanical properties of Autoclaved Aerated Concrete (AAC) block used in the building wall system: A review |
7th International and 9th National Conference on Advancement and Futuristic Trends in Mechanical and Materials Engineering, AFTME’19, December 5-7, 2019, IIT Ropar |
313 |
2019 |
F. Sharma and U.S. Dixit |
Cost comparison of additive manufacturing with traditional manufacturing in the presence of uncertainties |
7th International and 9th National Conference on Advancement and Futuristic Trends in Mechanical and Materials Engineering, AFTME’19, December 5-7, 2019, IIT Ropar |
314 |
2019 |
Agrawal A, Kansagara DD, Sharma D, and Saha UK |
Savonius wind turbine blade profile optimization by coupling CFD simulations with simplex search technique, Paper No. GTIndia2019-2442 |
ASME 2019 Gas Turbine India Conference, December 05 – 06, Chennai, India. |
315 |
2019 |
Alom N, and Saha UK |
Determining the optimal location of vent augmenters in an elliptical-bladed Savonius rotor, Paper No. GTIndia2019-2344 |
ASME 2019 Gas Turbine India Conference, December 05 – 06, Chennai, India. |
316 |
2019 |
Alom N, Das R, and Saha UK |
Optimization of aerodynamic parameters of an elliptical-Bladed Savonius wind rotor using multi-objective genetic algorithm, Paper No. GTIndia2019-2346, |
ASME 2019 Gas Turbine India Conference, December 05 – 06, Chennai, India. |
317 |
2019 |
Kashyap, D., Dass, A.K., |
Entropy Generation Analysis of Mixed Convection Flow in a Nanofluid Filled Porous Cavity Using a Two-Component Lattice Boltzmann Method. |
Proceedings of the ASME 2019 Gas Turbine India Conference. Volume 1: Compressors, Fans, and Pumps; Turbines; Heat Transfer; Structures and Dynamics. Chennai, Tamil Nadu, India. December 5-6, V001T03A007. ASME |
318 |
2019 |
Saurav Suman, Biswas Pankaj, Basil Kuriachen and Abhijit Sinha |
Thermo-mechanical study of single and multi-pass welding of CSEF steel for residual stresses and deformations considering solid state phase transformation, |
2nd International Conference on Recent Advances in Materials & Manufacturing Technologies, IMMT 2019, Dubai, United Arab Emirates., 20-22 November, 2019, BITS Pilani Dubai Campus. |
319 |
2019 |
Atanu banarjee, Sukhomay pal |
Advances in Computer, Communication and Control - Proceedings of ETES-2018 |
Springer Singapore |
320 |
2019 |
Bhowmick A., Saharia S., Hazarika S.M. |
Encoding High-Order Statistics in VLAD for Scalable Image Retrieval. |
Springer |
321 |
2019 |
Naosekpam V., Bhowmick A., Hazarika S.M. |
Correspondence for Non-parametric Scene Parsing of Natural Images |
Springer |
322 |
2019 |
Mandloi A., Jaisingh H.R., Hazarika S.M. |
Perception Based Navigation for Autonomous Ground Vehicles. |
Springer |
323 |
2019 |
A. K. Rout, N. Sahoo and P. Kalita |
Coaxial thermal probe as a heat flux sensor: An analytical, numerical and experimental approach |
Proceedings of International Conference on Advances in Mechanical Processing and Design, KIIT University, Bhubaneswar, India, 18-20 October |
324 |
2019 |
Pardeep Pankaj, Avinish Tiwari and Biswas Pankaj, |
Dissimilar Friction stir welding of DH36 shipbuilding steel and mild steel butt joints, Advances in Additive Manufacturing and Joining |
Springer singapore |
325 |
2019 |
Sridhar P.V.S.S., Pal K., Chakraborthy K. B., Bhattacharjee R., Majumder S., Biswas Pankaj, Mahanta P., |
Experimental Investigation and Mechanical Characterization of Double Sided Submerged Arc Welding of AISI 304 Austenitic Stainless Steel, Advances in Additive Manufacturing and Joining |
Springer singapore |
326 |
2019 |
S Sajith, KSRK Murthy, PS Robi |
Mixed mode fatigue crack growth studies of crack emanating from circular hole |
First International Conference on Manufacturing, Material Science and Engineering 2019 (ICMMSE 2019), |
327 |
2019 |
Abhijeet, R. Thakur, and Sachin S. Gautam, |
Investigation of Some Recently Proposed Explicit Time Integration Schemes For Nonlinear Problems, |
7th International Congress on Computational Mechanics and Simulation (ICCMS 2019), IIT Mandi, |
328 |
2019 |
Jyotindra Narayan, Aditya Kalani, Santosha K Dwivedy |
Reference Trajectory based Jacobian Transpose Control of a Novel Lower Limb Exoskeleton System for Children |
2019 5th International Conference on Signal Processing, Computing and Control (ISPCC) |
329 |
2019 |
Sarma, B., Dalal, A., and Basu, D. N. |
Transient Interfacial Dynamics of Viscous Droplets Impacting on Superhydrophobic Surfaces |
25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference, IIT Roorkee, Roorkee, India |
330 |
2019 |
V. Agrawal, S. Gouravaraju and Sachin S. Gautam, |
Application of Varying Order B-Splines Discretization For Accurate Peeling Computations |
10th international Conference on Computational Methods (ICCM2019), Nanyang Technological University, Singapore |
331 |
2019 |
V. Agrawal and Sachin S. Gautam |
Investigating The Influence of Higher-order NURBS Discretization on Contact Force Oscillation for Large Deformation Contact Using Isogeometric Analysis, |
International Conference on Applied Mechanical Engineering Research (IC-AMER2019), NIT Warangal, India, |
332 |
2019 |
Nelson Muthu |
Finite element modelling of Hyperelastic material |
Fourth National Finite Element Developers (NAFED)/FEAST Users Meet 2019 |
333 |
2019 |
Sagar Pawar, Sachin D Kore, Arup Nandy |
Magnetic Pulse Forming and Punching of Al Tubes—A Novel Technique for Forming and Perforation of Tubes, Advances in Forming, Machining and Automation |
Springer |
334 |
2019 |
Pardeep Pankaj, Avinish Tiwari and Biswas Pankaj, |
Transient Thermal Analysis of CO2 Laser Welding of AISI 304 Stainless Steel Thin Plates, Manufacturing Engineering |
Springer singapore |
335 |
2019 |
Sridhar P. V. S. S., Vishnu Nair, Biswas Pankaj, and Mahanta Pinakeswar, |
Thermomechanical analyses of Single Sided Single pass Submerged arc welding of AISI 304 Austenitic Stainless Steel, Advances in Computational Methods in Manufacturing |
Springer singapore |
336 |
2019 |
S. Mohanty and S. K. Dwivedy |
Active Vibration Absorber for a Nonlinear System with Time-Delay Acceleration Feedback for Superharmonic and Subharmonic Resonance Conditions, Machines, Mechanism and Robotics. Lecture Notes in Mechanical Engineering |
Springer singapore |
337 |
2019 |
Borad M. Barkachary, Shrikrishna N. Joshi |
Numerical Simulation and Experimental Validation of Nanoindentation of Silicon Using Finite Element Method, Advances in Computational Methods in Manufacturing. Lecture Notes on Multidisciplinary Industrial Engineering |
SPRINGER SINGAPORE |
338 |
2019 |
Gireesh Sharma N., A. George, S. P. Pandian, S. Sundararajan, Sachin S. Gautam |
A multiphysics simulation of thermo elastic dynamic damping of a vibratory gyroscope resonator for space application |
7th International Congress on Computational Mechanics and Simulation (ICCMS 2019), IIT Mandi, |
339 |
2019 |
S. Gouravaraju, V. Agrawal, R. A. Sauer, and Sachin S. Gautam |
Numerical Analysis of Gecko Spatula Peeling Using Adhesive Friction Model |
7th International Congress on Computational Mechanics and Simulation (ICCMS 2019), IIT Mandi, |
340 |
2019 |
S. Gouravaraju and Sachin S. Gautam, |
Investigating The Influence of Geometrical And Material Parameters on Peeling Behaviour of A Gecko Spatula, |
International Conference on Applied Mechanical Engineering Research (IC-AMER2019), NIT Warangal, India, |
341 |
2019 |
Saurav K.Dutta, B. Sandeep Reddy, S.K. Dwivedy |
Design of a Two Degrees of Freedom Actuator for Rehabilitation Robotic Applications |
iNaCoMM 2019 |
342 |
2019 |
M.K. Hussain and K.S.R.K. Murth |
NSIFs of 2D elastic bodies with straight and curved sharp V-notche |
First International Conference on Manufacturing, Material Science and Engineering 2019 (ICMMSE 2019), |
343 |
2019 |
M.K. Hussain and K.S.R.K. Murth |
Calculation of NSIFs and shape factors of four-point bend specimens containing sharp V-notches |
7th International Congress on Computational Mechanics and Simulation (ICCMS 2019), IIT Mandi, |
344 |
2019 |
Vishal K. Singh, Shrikrishna N. Joshi |
Computation of End-Cutting-Edge Wear of Single-Point Cutting Tool Using Image Processing, Advances in Computational Methods in Manufacturing. Lecture Notes on Multidisciplinary Industrial Engineering |
SPRINGER singapore |
345 |
2019 |
R. Umesh, A. Goyal, B. S. Sikarwar and Sachin S. Gautam, |
Parametric Study of Lithium-Ion Battery Module For Electric Vehicle Application |
7th International Congress on Computational Mechanics and Simulation (ICCMS 2019), IIT Mandi, |
346 |
2019 |
J. S. Rapur and R. Tiwari |
On-line Time Domain Vibration and Current Signals Based Multi-Fault Diagnosis of Centrifugal Pumps using Support Vector Machines |
Journal of Nondestructive Evaluation |
347 |
2019 |
S. Gorthi, H.S. Gaikwad, P. K. Mondal and G. Biswas |
Surface Tension Driven Filling in a Soft Microchannel: Role of Streaming Potential |
Industrial and Engineering Chemistry Research (ACS) |
348 |
2019 |
J. Mahesh Kumar and Sachin S. Gautam |
Performance Evaluation of Implicit Composite Time Integration Schemes For Dynamic Problems, |
7th International Congress on Computational Mechanics and Simulation (ICCMS 2019), IIT Mandi, |
349 |
2019 |
Shukla, Shiv Sahaya, and K. S. R. K. Murthy |
Numerical analysis of a semi-elliptical surface cracked plate under tension |
First International Conference on Manufacturing, Material Science and Engineering 2019 (ICMMSE 2019), |
350 |
2019 |
Gautam biswas, amaresh dalal |
Fundamentals of Convective Heat Transfer |
CRC Press (Taylor and Francis Group) |
351 |
2019 |
K K Basumatary, S K Kakoty and K Kalita |
Stability Analysis of a Rigid Rotor supported on Gas Foil Bearings under Different Loading Conditions, Machines, Mechanism and Robotics. Lecture Notes in Mechanical Engineering |
Springer singapore |
352 |
2019 |
R. S. Srinivas, R. Tiwari and Ch. K. Babu |
Model Based Analysis and Identification of Multiple Fault Parameters in Coupled Rotor Systems with Offset Discs in the Presence of Angular Misalignment and Integrated with an Active Magnetic Bearing |
Journal of Sound & Vibration |
353 |
2019 |
R. Vignesh Babu, S. Kanagaraj |
Sintering behaviour of Copper/Carbon nanotube composites and their characterization |
Advanced Powder Technology |
354 |
2019 |
Raghavendra Rohit Dabbara and R. Tiwari |
Strength-Wear-Thermal Based Multi-Objective Geometric Design Optimization of Cylindrical Roller Bearings using Genetic Algorithms |
Machine Design |
355 |
2019 |
V. Agrawal, T. X. Duong, R. A. Sauer, and Sachin S. Gautam, |
An Accurate and Efficient Varying-Order NURBS Discretization Method for Isogeometric Contact Analysis |
VII International Conference on Isogeometric Analysis (IGA 2019), Munich, Germany, |
356 |
2019 |
V. Agrawal, S. Gouravaraju, R. A. Sauer, and Sachin S. Gautam, |
A Varying-Order B-Splines Discretization Method For Peeling Computations, |
VI. International Conference on Computational Contact Mechanics - An ECCOMAS Thematic Conference, Leibnizhaus Hannover, Germany, |
357 |
2019 |
U. Kiran, V. Agrawal, D. Sharma and Sachin S. Gautam |
A GPU Based Acceleration of Finite Element And Isogeometric Analysis, |
10th International Conference on Computational Methods (ICCM2019), Nanyang Technological University, Singapore, |
358 |
2019 |
Saurav Suman, Pankaj Biswas, S. K. Patel, V. P. Singh, Akhileshwar Nirala, Basil Kuriachen, |
Measurement of Residual Stresses in Submerged Arc Welded P91 Steel Using Surface Deformation, |
ICEMT-2019, International Conference on Mechanical and Energy Technologies-2019, Galgotias College of Engineering and Technology, Noida, India. |
359 |
2019 |
R S Reddy Rajidi, A Gupta and S Panda |
The effective properties of electro-viscoelastic composite using energy method |
Materials Today: Proceedings |
360 |
2019 |
R S Reddy and S Panda |
The energy-based method for effective dynamic properties of viscoelastic composite |
Materials Today: Proceedings |
361 |
2019 |
atoll k soti, ashok de |
Vortex-Induced Vibrations of a Confined Circular Cylinder |
Proceedings of the 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference |
362 |
2019 |
A. Chaudhari, S. K. Hotta, N. Sahoo and V. Kulkarni |
Effect of vertical location of the spark plug on the performance of a raw biogas fueled variable compression ratio spark ignition engine |
Energy and Enviornment |
363 |
2019 |
A. Raj, A. Ch. Borsaikia and U.S. Dixit |
Compressive and shear bond strengths of grooved AAC blocks and masonry |
Materials and Structures |
364 |
2019 |
Dipendra K. Roy and R. Tiwari |
Estimation of the Internal and External Damping from the Forward and Backward Spectrum of a Rotor with a Fatigue Crack |
Propulsion and Power Research |
365 |
2019 |
Dipendra K. Roy and R. Tiwari |
Experimental Identification of Rotating and Stationary Damping in a Cracked Rotor System with an Offset Disc |
Archive in Mechanical Engineering |
366 |
2019 |
F. Sharma and U.S. Dixit |
Fuzzy set based cost model of additive manufacturing with specific example of selective laser sintering |
Journal of Mechanical Science and Technology |
367 |
2019 |
J. Shruti Rapur and R. Tiwari |
Multi-fault diagnosis of combined hydraulic and mechanical centrifugal pump faults using continuous wavelet transform and support vector machines |
ASME, Journal of Dynamic Systems, Measurement and Control |
368 |
2019 |
Kotoky, S., Dalal, A., and Natarajan, G. |
A Computational Analysis of the Role of Particle Diameter on the Fluidization Behavior in a Bubbling Gas-Solid Fluidized Bed |
Computational Particle Mechanics |
369 |
2019 |
P. Gangsar and R. Tiwari |
On-line Diagnostics of Mechanical and Electrical Faults in Induction Motor using Multiclass Support Vector Machine Algorithms based on Frequency Domain Vibration and Current Signals |
ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering |
370 |
2019 |
S. Pati, P.K. Mondal |
Limiting thermal characteristics for flow of non-Newtonian fluids between asymmetrically heated parallel plates: An analytical study |
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering |
371 |
2019 |
Susant Behera, Poonam Kumari |
Analytical piezoelasticity solution for natural frequencies of levy-type piezolaminated plates |
International Journal of Applied Mechanics |
372 |
2019 |
Thirumalaisamy, R., Natarajan, G., and Dalal, A. |
Comment on a “Modifications to the Gradient Schemes on Unstructured Cell Centered Grids for the Accurate Determination of Gradients near Conductivity Changes” |
Physics of Fluids |
373 |
2019 |
Tiwari Avinish, Pardeep Pankaj, Biswas Pankaj, Kore S. D. and Pal Sukhomay |
Effect of tool offset and rotational speed in dissimilar friction stir welding of AISI 304 stainless steel and mild steel |
Journal of Materials Engineering and Performances |
374 |
2019 |
Microstructure and Work Hardening Behaviour of Micro Plasma Arc Welded AISI 316L Sheet Joint |
Microstructure and Work Hardening Behaviour of Micro Plasma Arc Welded AISI 316L Sheet Joint |
Journal of Materials Engineering and Performance |
375 |
2019 |
R S Reddy, S Panda and A Gupta |
Nonlinear dynamics of an inclined FG pipe conveying pulsatile hot fluid |
International Journal of Non-Linear Mechanics |
376 |
2019 |
Uday S Dixit, S.M. Kamal, R. Shufen |
Autofrettage Processes: Technology and Modelling |
CRC Press (Taylor and Francis Group) |
377 |
2019 |
Pardeep Pankaj, Tiwari Avinish and Biswas Pankaj |
Influence of tool traverse speed on the characteristics of dissimilar friction stir welded DH36 shipbuilding steel-mild steel, |
International Conference on Advanced Materials and Processes for Defence Applications, ADMAT-2019, Sept. 23-25, Defence Metallurgical Research Laboratory (DMRL), Hyderabad. |
378 |
2019 |
D. K. Biswal, D. Bandopadhya and S. K. Dwivedy |
A Non-Linear Dynamic Model of Ionic Polymer-Metal Composite (IPMC) Cantilever Actuator |
International Journal of Automotive and Mechanical Engineering |
379 |
2019 |
Mohamed Abbas, Jyotindra Narayan, Santosha K Dwivedy |
Simulation Analysis for Trajectory Tracking Control of 5-DOFs Robotic Arm using ANFIS Approach |
2019 5th International Conference On Computing, Communication, Control And Automation (ICCUBEA) |
380 |
2019 |
Sibananda Mohanty and S. K. Dwivedy |
Nonlinear Vibration Absorber for a Nonlinear System with a Time Delay Acceleration Feedback under the Internal Resonance, Subharmonic, Superharmonic and Principal Parametric Resonance Conditions Simultaneously |
|
381 |
2019 |
S. Arun, Balaphrang Marbaniang, Bhaskar Borgohain & S. Kanagaraj. |
Rehabilitation evaluation of the newly developed polymeric based passive polycentric knee joint |
Disability and Rehabilitation: Assistive Technology |
382 |
2019 |
Agrawal. V, and Gautam S. S. |
Investigation of Contact Pressure Oscillations with Different Segment-to-Segment Based Isogeometric Contact Formulations |
Springer |
383 |
2019 |
A. Misra, P.M. Pandey, U.S. Dixt, A. Roy and V.V. Silberschmidt |
Multi-objective optimization of ultrasonic-assisted magnetic abrasive finishing process |
International Journal of Advanced Manufacturing Technology |
384 |
2019 |
M. Kumar, Sachin S. Gautam, and P. M. Dixit |
Non-linear ductile damage growth law at elevated temperature |
Sadhana |
385 |
2019 |
S. Pandian, S. L. N. Desikan and Sahoo Niranjan |
Onset of transient shock interaction with cavity shear layer |
AIAA Journal |
386 |
2019 |
A. J. Chaudhari, S. K. Hotta, N. Sahoo and V. Kulkarni |
Combined impact of compression ratio and re-circulated exhaust gas on the performance of a biogas fueled spark ignition engine |
Journal of Renewable and Sustainable Energy |
387 |
2019 |
Deepak Sharma, and Pradyumn K. Shukla |
Line-Prioritized Environmental Selection and Normalization Scheme for Many-Objective Optimization using Reference-Lines-based Framework |
Swarm and Evolutionary Computation |
388 |
2019 |
Dehury, P., Chaudhary R. K., Banerjee, T., and Dalal, A. |
Evaluation of Thermophysical Properties of Menthol-Based Deep Eutectic Solvent as a Thermal Fluid: Forced Convection and Numerical Studies |
Industrial & Engineering Chemistry Research |
389 |
2019 |
Nada Barakat and Deepak Sharma |
Evolutionary Multi-Objective Optimization for Bulldozer and its Blade in Soil Cutting |
International Journal of Management Science and Engineering Management |
390 |
2019 |
Sarma, B., Shahapure, V., Dalal, A., and Basu, D. N. |
Experimental Characterization of the Growth Dynamics During Capillarity-Driven Generation |
Physical Review E |
391 |
2019 |
Sidhartha Das, Asis Giri, Sutanu Samanta, and S. Kanagaraj. |
An experimental investigation of properties of nano-fluid and its performance on thermosyphon cooled by natural convection |
Transactions of the ASME Journal of Thermal Science and Engineering Applications |
392 |
2019 |
Vishnu VT, Arnab Kr. De, P.K. Mishra |
Significance of Prandtl Number on the Heat Transport and Flow Structure in Rotating Rayleigh–Bénard Convection |
ASME J. Heat Transfer |
393 |
2019 |
Tiwari Avinish, Pardeep Pankaj, Biswas Pankaj, Kore S. D. & Gourav Rao A. |
Tool performance evaluation of friction stir welded shipbuilding grade DH36 steel butt joints |
International Journal of Advanced Manufacturing Technology |
394 |
2019 |
Sibananda Mohanty and S. K. Dwivedy |
Nonlinear Dynamics of Piezoelectric based Active Nonlinear Vibration Absorber using Time Delay Acceleration Feedback |
Nonlinear Dynamics |
395 |
2019 |
PVSS Sridhar, P. Mahanta and Biswas Pankaj |
Influence of Welding Current on Bead profile and Mechanical properties of Double sided submerged arc welding of AISI 304 Austenitic stainless steel, |
ICMMSE-2019, August 16-17, CMR Institute of Technology, Hyderabad. |
396 |
2019 |
Kashyap, D., Dass, A.K. |
Effect of boundary conditions on heat transfer and entropy generation during two-phase mixed convection hybrid Al 2 O 3 -Cu/water nanofluid flow in a cavity |
International Journal of Mechanical Sciences |
397 |
2019 |
Seema Negi, A. A. Nambolan, Sajan Kapil, Prathamesh S. Joshi, R. Manivannan, K. P. Karunakaran, and Parag Bhargava |
Review on electron beam based additive manufacturing |
Rapid Prototyping Journal |
398 |
2019 |
Satyajit Panda and M K Dubey |
A balanced laminate of piezoelectric fiber composite for improved shear piezoelectric actuation of beams |
Mechanics of Advanced Materials and Structures |
399 |
2019 |
S. K. Barik, R. G. Narayanan and N. Sahoo |
Experimental investigation on the forming of AA 5052-H32 sheet using a rigid body based impact in a shock tube |
Springer |
400 |
2019 |
Avilash Sahoo, Santosha K. Dwivedy and P. S. Robi |
Advancements in the field of autonomous underwater vehicle |
Ocean Engineering |
401 |
2019 |
Kumar, Raushan, and Anoop K. Dass. |
A new flux‐limiting approach–based kinetic scheme for the Euler equations of gas dynamics |
International Journal for Numerical Methods in Fluids |
402 |
2019 |
Sunku Prasad J, Muthukumarar, P, Fenil Desai, Dipankar N. Basu, Muhammad M. Rahman. |
A Critical Review of High-Temperature Reversible Thermochemical Energy Storage Systems |
Applied Energy |
403 |
2019 |
Bhaben Kalita and S. K. Dwivedy |
Nonlinear dynamics of a parametrically excited pneumatic artificial muscle (PAM) actuator with simultaneous resonance condition |
Mechanism and Machine Theory |
404 |
2019 |
Ashirbad Jana, S. Senthilvelan and S. Kanagaraj |
A novel processing technique for the development of machining free acetabular cup from UHMWPE powder to be used in total hip replacement surgeries |
|
405 |
2019 |
O. Siram and N. Sahoo |
Vortex stability analysis of horizontal axis wind turbine wake |
All India Seminar on Scope and Opportunity of Small Hydro and Wind Power in North-East India, NIT Mizoram, India, 02-03 August |
406 |
2019 |
A. Noor, S. Gouravaraju and Sachin S. Gautam |
Numerical Analysis of Erosion of Rough Surface. |
Springer |
407 |
2019 |
S. Gouravaraju, Sachin singh gautham |
Nonlinear Finite Element Analysis of A Gecko Spatula Adhesion on A Rigid Substrate |
Springer |
408 |
2019 |
Varun Sharma, Pulak M. Pandey, Uday S. Dixit, Anish Roy and Vadim V. Silberschmidt |
FE simulations of conventional and ultrasonically assisted turning processes with plane and textured cutting inserts |
Journal of Micromanufacturing |
409 |
2019 |
D. Gayen, R. Tiwari and D. Chakraborty |
Static and Dynamic Analyses of Cracked on Functionally Graded Structural Components: A Review |
Composites Part B |
410 |
2019 |
Animesh Nandy, D. Chakraborty and Mahesh S Shah |
Optimal Sensors/Actuators Placement In Smart Structure using Island Model Parallel Genetic Algorithm |
International Journal of Computational Methods |
411 |
2019 |
C. Shravan and R. Tiwari |
Experimental Identification of Cracked Rotor System Parameters from the Forward and Backward Whirl Responses |
Archive in Mechanical Engineering |
412 |
2019 |
D. Gayen, R. Tiwari and D. Chakraborty |
Finite element based stability analysis of a rotor-bearing system having a functionally graded shaft with transverse breathing cracks |
International Journal of Mechanical Sciences |
413 |
2019 |
Dipendra K. Roy and R. Tiwari |
Identification of the Internal and External Damping in a Cracked Rotor System Undergoing Forward and Backward Whirls |
Archive in Mechanical Engineering |
414 |
2019 |
G. Ranjan and R. Tiwari |
Application of Active Magnetic Bearings for In-Situ Flexible Rotor Residual Balancing Using a Novel Generalized Influence Coefficient Method |
Inverse Problems in Science & Engineering |
415 |
2019 |
G.C. Verma, P.M. Pandey and U.S. Dixit |
An experimental study on surface roughness and frictional property of ultrasonic-vibration-assisted milled surface |
Proceedings of IMECH-E, Part C: Journal of Mechanical Engineering Science |
416 |
2019 |
H.S. Gaikwad, P.K. Mondal, D. N. Basu, N. Chimres, S. Wongwises |
Analysis of the effects of Joule heating and viscous dissipation on combined pressure-driven and electrokinetic flows in a two-parallel plate channel with unequal constant temperatures |
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering |
417 |
2019 |
J. Shruti Rapur and R. Tiwari |
Experimental fault diagnosis for known and unseen operating conditions of centrifugal pumps using MSVM and WPT based analyses |
Measurement |
418 |
2019 |
Kiran Naik B, Muthukumar P |
Performance comparison of air cooled and water cooled condenser based air conditioning plants in a humid subtropical region. |
J Air Conditioning and Refrigeration ISHRAE |
419 |
2019 |
Krishan Chand, Mukesh Sharma, Venugopal T. Vishnu, and Arnab Kr. De |
Statistics of coherent structures in twodimensional turbulent Rayleigh-Bénard convection |
Physics of Fluids |
420 |
2019 |
Lakshmi DVN, Muthukumar P, Layek A, Nayak PK. |
Performance Analyses of Mixed Mode Forced Convection Solar Dryer for Drying of Stevia Leaves. |
Solar Energy |
421 |
2019 |
M. S. Agrawal, H. S. Gaikwad, P. K. Mondal, G. Biswas |
Analysis and Experiments on the Spreading Dynamics of a Viscoelastic Drop |
Applied Mathematical Modelling |
422 |
2019 |
Manish Agrawal, Arup Nandy, CS Jog |
A hybrid finite element formulation for large-deformation contact mechanics |
Computer Methods in Applied Mechanics and Engineering |
423 |
2019 |
N. Bhardwaj, R.G. Naryanan, U.S. Dixit and M.S.J. Hashmi |
Recent developments in friction stir welding and resulting industrial practices |
Advances in Materials and Processing Technologies |
424 |
2019 |
Nandani Rai, Raagdeep Raj, S. Kanagaraj |
Radical Scavenging of Nanoceria in Minimizing the Oxidative Stress-Induced Loss of Residual Hearing: A Review |
Journal of the Indian Institute of Science |
425 |
2019 |
Nath, B., Bidkar, A. P., Kumar, V., Dalal, A., Jolly, M. K., Ghosh, S., and Biswas, G. |
Deciphering Hydrodynamic and Drug-resistant Behaviors of Metastatic EMT Breast Cancer Cells Moving in a Constricted Microcapillary |
Journal of Clinical Medicine |
426 |
2019 |
Nithin N. Raju, Muthukumar P, Vivek Selvan P, Malleswararao K. |
Design Methodology and Thermal Modelling of Industrial Scale Reactor for Solid State Hydrogen Storage |
Int J Hydrogen Energy |
427 |
2019 |
Pardeep Pankaj, Tiwari Avinish and Biswas Pankaj |
Influence of operating parameters on CO2 laser welded butt joints of AISI 304 stainless steel thin sheets |
Lasers in Manufacturing and Materials Processing |
428 |
2019 |
Pardeep Pankaj, Tiwari Avinish, Bhadra Rakesh and Biswas Pankaj |
Experimental Investigation on CO2 Laser Butt Welding of AISI 304 Stainless Steel and Mild Steel Thin Sheets |
Optics & Laser Technology |
429 |
2019 |
Parth Paritosh, Bhaben Kalita and Deepak Sharma |
A Game Theory based Land Layout Optimization of Cities Using Genetic Algorithm |
International Journal of Management Science and Engineering Management |
430 |
2019 |
R. Sarma and P. K . Mondal |
Marangoni instability in a heated viscoelastic liquid film: Longwave versus shortwave perturbations |
Physical Review E |
431 |
2019 |
R. Shufen, N. Mahanta and U.S. Dixit |
Development of a thermal autofrettage setup to generate compressive residual stresses on the surfaces of a cylinder |
ASME Journal of Pressure Vessel Technology |
432 |
2019 |
S. K. Hotta, N. Sahoo and K. Mohanty |
Comparative assessment of a spark ignition engine fueled with gasoline and raw biogas |
Renewable Energy |
433 |
2019 |
Sidhartha Das, Asis Giri, Sutanu Samanta, and S. Kanagaraj. |
Role of graphene nanofluids on heat transfer enhancement in thermosyphon |
Journal of Science: Advanced Materials and Devices |
434 |
2019 |
Soumya Ranjan Nanda, Vinayak Kulkarni, Niranjan Sahoo and Viren Menezes |
A comparison of accelerometer and piezofilm-based force balances for hypersonic shock tunnels |
Journal of Aerospace Engineering (IMeche Part G) |
435 |
2019 |
Soumya Ranjan Nanda, Vinayak Kulkarni, Niranjan Sahoo and Viren Menezes |
An innovative approach for prediction of aerodynamic coefficients in shock tunnel testing with soft computing |
Measurement |
436 |
2019 |
Prakash Kumar Sahu, Nikhil P Vasudevan, Bipul Das and Sukhomay Pal |
Assessment of Self-Reacting Bobbin Tool Friction Stir Welding for Joining AZ31 Magnesium Alloy at Inert Gas Environment |
Journal of Magnesium and Alloys |
437 |
2019 |
Prakash Kumar Sahu, Sukhomay Pal and Qingyu Shi |
Effect of solid solution phase constitution on dissimilar Al/Cu FSW using Zn as an alloying element at the joint interface |
SN Applied Sciences |
438 |
2019 |
Bhaben Kalita and S. K. Dwivedy |
Dynamic analysis of pneumatic artificial muscle (PAM) actuator for rehabilitation with principal parametric resonance condition |
Nonlinear Dynamics |
439 |
2019 |
R. K. Ojha and S. K. Dwivedy |
Dynamic Analysis of a Three-Layered Sandwich Plate with Composite Layers and Leptadenia Pyrotechnica Rheological Elastomer-Based Viscoelastic Core |
Journal of Vibration Engineering & Technologies |
440 |
2019 |
Jibin T. Philip, Deepak Kumar, S.N. Joshi, Jose Mathew, Basil Kuriachen |
Monitoring of EDM parameters to develop tribo-adaptive Ti6Al4V surfaces through accretion of alloyed matrix |
Industrial Lubrication and Tribology |
441 |
2019 |
Sandeep Das, Randhir Kumar Raman, N. Devarani, Shrikrishna N.Joshi |
Surface Alloying of Titanium Di-boride (TiB2) and Silicon Carbide (SiC) on Aluminium Al 5052 using Electric Discharge Processing |
Procedia Structural Integrity |
442 |
2019 |
K.S.K.R.Krishna Murthy, M.K. Hussain |
Advances in Materials and Manufacturing Engineering, Lecture Notes in Mechanical Engineering |
Springer Singapore |
443 |
2019 |
R. Ganesh Naraysan,Uday S Dixit,Srikrihna S joshi, |
Advances in Computational Methods in Manufacturing |
Springer Nature Singapore |
444 |
2019 |
A. Noor, S. Gouravaraju and Sachin S. Gautam |
Reduced-Order Finite Element Analysis of Rough Surface Contact Using Reduced Integration Elements |
Springer |
445 |
2019 |
P. Gangsar and R. Tiwari |
Diagnostics of Mechanical and Electrical Faults in Induction Motors using Wavelet based Features of Vibration and Current through Support Vector Machine Algorithms |
Journal of the Brazilian Society of Mechanical Sciences and Engineering |
446 |
2019 |
Anshul Garg and Santosha Kumar Dwivedy |
Nonlinear dynamics of parametrically excited piezoelectric energy harvester with 1: 3 internal resonance |
International Journal of Non-Linear Mechanics |
447 |
2019 |
Tiwari Avinish, Singh Piyush, Pardeep Pankaj, Biswas Pankaj, Kore S. D.& Gourav Rao A |
FSW of low carbon steel using Tungsten Carbide (WC-10wt.%Co) based tool material |
Journal of Mechanical Science and Technology |
448 |
2019 |
M K Dubey and Satyajit Panda |
Shear-based vibration control of annular sandwich plates using different piezoelectric fiber composites: A comparative study |
Journal of Sandwich Structures & Materials |
449 |
2019 |
R. K. Ojha and S. K Dwivedy |
Analysis of Sandwich Plates with Isotropic Skins and Viscoelastic Core |
International Journal of Structural Stability and Dynamics, Dynamics |
450 |
2019 |
K. Chatterjee, J. Zhang and U.S. Dixit |
A framework for enhancing machining performance using big research data analytics |
40th MATADOR International Conference on Advanced Manufacturing and Design, July 8-10, 2019, Hangzhou, China. |
451 |
2019 |
PVSS Sridhar, P. Mahanta and Biswas Pankaj |
Influence of Welding Current on Bead profile and Mechanical properties of Double sided submerged arc welding of AISI 304 Austenitic stainless steel |
Materials Today: Proceedings (Elsevier). |
452 |
2019 |
S. Brahmachary, G. Natarajan, V. Kulkarni, N. Sahoo and S. R. Nanda |
Application of greedy and heuristic algorithm based optimisation methods towards aerodynamic shape optimization |
Springer |
453 |
2019 |
R S Reddy, S Panda and G Natarajan |
Nonlinear dynamics of functionally graded pipes conveying hot fluid |
Nonlinear Dynamics |
454 |
2019 |
M K Dubey and Satyajit Panda |
Shear actuation mechanism and shear-based actuation capability of an obliquely reinforced PFC in active control of annular plates |
Journal of Intelligent Material Systems and Structures |
455 |
2019 |
V. Agrawal ad Sachin S Gautam |
An Isogeometric-Based Study of Mortar Contact Algorithm for Frictionless Sliding |
Springer |
456 |
2019 |
D. Bora, M. Kumar and Sachin S Gautam |
Continuum Damage Mechanics Based Simulation of Ductile Fracture of Cylindrical Tubes |
Springer |
457 |
2019 |
Bipul Das, Sukhomay Pal, Swarup Bag |
Probing defects in friction stir welding process using temperature profile |
Sadhana |
458 |
2019 |
Vigneshwaran K, Gurpreet Singh Sodhi, Muthukumar P, Senthilmurugan S. |
Concrete based high temperature thermal energy storage system: Experimental and Numerical Studies. |
Energy Conversion and Management |
459 |
2019 |
A. Sahu, R. K. Thakur, V. Agarwal and Sachin S. Gautam |
A Comparative Study of Five Explicit Time Integration Algorithms for Non-linear Dynamic Systems |
Springer |
460 |
2019 |
HARISH PANDURANGA JEEVAJI, U.S. Dixit, Amit Raj and Shashikant Soren |
RIDER OPERATABLE AND RETRACTABLE STABLIZER WHEELS SYSTEM IN BICYCLE |
|
461 |
2019 |
Alom N, Kumar N, and Saha UK |
Analyzing the effect of shaft and end-plates of a newly developed elliptical-bladed Savonius rotor from wind tunnel tests, Paper No. OMAE2019-95570 |
ASME 38th International Conference on Ocean, Offshore and Arctic Engineering, June 09–14, Glasgow, Scotland, UK. |
462 |
2019 |
A. Raj, A. Ch. Borsaikia and U.S. Dixit, , |
Finite element modeling of autoclave aerated concrete (AAC) masonry for estimation of strength |
6th International Conference on Production & Industrial Engineering (CPIE 2019), June 8-10, Dr B R Ambedkar National Institute of Technology Jalandhar. |
463 |
2019 |
A. Tripathi, R. Ganesh Narayanan and U.S. Dixit, |
Implementation of yield criteria in ABAQUS for simulations of deep drawing: a review and preliminary results, |
6th International Conference on Production & Industrial Engineering (CPIE 2019), June 8-10, Dr B R Ambedkar National Institute of Technology Jalandhar. |
464 |
2019 |
N. Bhardwaj, R. Ganesh Narayanan and U.S. Dixit |
Effect of lubrication on energy requirement and joint properties during FSSW of AA5052-H32 aluminium alloy |
6th International Conference on Production & Industrial Engineering (CPIE 2019), June 8-10, Dr B R Ambedkar National Institute of Technology Jalandhar. |
465 |
2019 |
P.K. Bannaravuri, A.K. Birru and U.S. Dixit |
Effect of laser surface melting on the surface integrity of aluminum composites |
6th International Conference on Production & Industrial Engineering (CPIE 2019), June 8-10, Dr B R Ambedkar National Institute of Technology Jalandhar. |
466 |
2019 |
K. P. Karunakaran, Sajan Kapil, Seema Negi, and Prathamesh Shreekant Joshi |
Method and System for Manufacturing a Near Net-Shape of an Object Using Feature-Based Conformal Slicing |
|
467 |
2019 |
Utpal Kiran, Deepak Sharma and Sachin Singh Gautam |
GPU-Warp based Finite Element Matrices Generation and Assembly using Coloring Method. |
6 |
468 |
2019 |
P Kishore Kumar and S Kanagaraj |
Switchable Assisted Deep Squat Hinge with Friction Control Mechanism for Polycentric Knee Joints |
|
469 |
2019 |
Heta Jigar Panchal, P. Kishore Kumar, Ajaikumar B. Kunnumakkara and S. Kanagaraj |
In-Situ Beat to Beat Blood Pressure Monitoring and Recording using Cardiovascular Implantable Electronic Devices |
|
470 |
2019 |
A. K. Rout, N. Sahoo and P. Kalita |
Characterization of high frequency thermal sensors for transient temperature measurement |
Proceedings of International Conference on Advances in materials and Manufacturing Engineering, KIIT University, Bhubaneswar, India, 15-17 March |
471 |
2019 |
N Alom and U K Saha |
Drag and lift characteristics of a novel elliptical-bladed Savonius rotor with vent augementers |
ASME Journal of Solar Energy Engineering |
472 |
2019 |
V. Agrawal and Sachin S. Gautam |
Higher-order Hermite enriched contact finite elements for adhesive contact problems |
International Journal of Materials and Structural Integrity |
473 |
2019 |
Vigneshwaran K, Gurpreet Singh Sodhi, Muthukumar, P, Anurag Guha, Senthilmurugan S. |
Experimental and Numerical Investigations on High Temperature Cast Steel Based Sensible Heat Storage System |
Applied Energy |
474 |
2019 |
Vishnu VT, Arnab Kr. De, P.K. Mishra |
Dynamics and statistics of reorientations of large-scale circulation in turbulent rotating Rayleigh-Bénard convection |
Physics of Fluids |
475 |
2019 |
R. Ganesh Narayanan, Jay S Gunasekera (Eds.) |
Sustainable Material Forming and Joining |
CRC press |
476 |
2019 |
Sarita, B., Senthilvelan,S |
Effects of lubricant on the surface durability of an injection molded polyamide 66 spur gear paired with a steel gear |
Tribology International |
477 |
2019 |
Devarshi Kashyap, Vaibhav Jaiswal, Subramani Kanagaraj |
Biomaterials for Biomedical Devices and Implants |
Springer, Singapore |
478 |
2019 |
G.C. Verma, P.M. Pandey and U.S. Dixit |
An experimental study on surface roughness and frictional property of ultrasonic-vibration-assisted milled surface |
Proceedings of IMECH-E, Part C: Journal of Mechanical Engineering Science |
479 |
2019 |
S. gorthi, H. S. Gaikwad, P. K. Mondal, G. Biswas |
Surface Tension Driven Filling in a Soft Microchannel: Role of Streaming Potential |
Industrial & Engineering Chemistry Research |
480 |
2019 |
M. K. Dubey and S. Panda |
Shear-based vibration control of annular sandwich plates using different piezoelectric fiber composites: A comparative study |
Journal of Sandwich Structures & Materials |
481 |
2019 |
Avinish Tiwari, Pardeep Pankaj, Pankaj Biswas, Sachin D. Kore, and A Gourav Rao |
Tool performance evaluation of friction stir welded Shipbuilding grade DH36 steel butt joints |
International Journal of Advanced Manufacturing Technology |
482 |
2019 |
Kotoky. S., Dalal. A., and Natarajan. G., 2018 |
The Role of Particle Diameter on the Fluidization Behavior in a Bubbling Gas-Solid Fluidized Bed |
Paper No. FMFP2018-680, Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power, December 10-12, 2018, Indian Institute of Technology Bombay, Mumbai, India. |
483 |
2019 |
Deepak Sharma, Sukhomay Pal, Aayush Sahay, Puneet Kumar, Gaurav Agarwal, and Katravath Vignesh |
Local Search Heuristics based Genetic Algorithm for Capacitated Vehicle Routing Problem |
2nd International Conference on Computational Methods in Manufacturing (ICCMM), 8 – 9 March 2019, IIT Guwahati, India. |
484 |
2019 |
A. Bisht, A. Roy, U. S. Dixit, S. Suwas and V.V. Silberschmidt |
Small-scale machining simulations |
2nd International Conference on Computational Methods in Manufacturing March 8-9, 2019, IIT Guwahati. |
485 |
2019 |
Agyapal SINGH, Poonam KUMARI, Ehtesham HUSSAIN |
Analytical Free Vibration Solution Of Functionally Graded Beam Having Longitudinal Stiffness Variation |
10th International Conference on Material for Advanced Technologies, Singapore from 23 to 28 June, 2019 |
486 |
2019 |
Nath, B., Biswas, G., and Dalal, A. |
Influence of electric field on deformation of a drop in shear flow |
Physics of Fluids |
487 |
2019 |
Deka, H., Biswas, G., Chakraborty, S., and Dalal, A. |
Coalescence Dynamics of Unequal Sized Drop |
Physics of Fluids |
488 |
2019 |
P. Kaushik, P. K. Mondal, P. K. Kundu, S. Wongwises |
Rotating electroosmotic flow through a polyelectrolyte-grafted microchannel: An analytical solution |
Physics of Fluids |
489 |
2019 |
H. Gaikwad, P. Baghel, R. Sarma, P. K. Mondal |
Transport of neutral solutes in a viscoelastic solvent through a porous microchannel |
Physics of Fluids |
490 |
2019 |
A. Misra, P.M. Pandey, U.S. Dixtt, A. Roy and V.V. Silberschmidt |
Multi-objective optimization of ultrasonic-assisted magnetic abrasive finishing process |
International Journal of Advanced Manufacturing Technology, |
491 |
2019 |
D.V.N. Lakshmi, Muthukumar P |
Design and development of mixed mode forced convection solar dryer for drying of curcuma zeodaria |
Presented at 12th International Conference on Thermal Engineering: Theory and Applications, February 23-26, 2019, Gandhinagar, India |
492 |
2019 |
Kiran Naik B and Muthukumar P |
Energy Exergy and Entransy Analyses of an Air Cooled Condenser Employed in a Vapour Compression Chiller |
Presented at 12th International Conference on Thermal Engineering: Theory and Applications, February 23-26, 2019, Gandhinagar, India |
493 |
2019 |
Sunku Prasad J, Saurabh Dongare, Anandalakshmi R, Muthukumar P |
Numerical Investigation of PCM based Heat Sinks under Constant and Variable Heat Load Conditions |
Presented at 12th International Conference on Thermal Engineering: Theory and Applications, February 23-26, 2019, Gandhinagar, India |
494 |
2019 |
Riddhiman Saikia and Deepak Sharma |
Hybridizing Evolutionary Multi-Objective Algorithm Using Random Mutations and Local Searches |
in 2nd International Conference on Computational Methods in Manufacturing (ICCMM), 8 – 9 March 2019, IIT Guwahati, India. |
495 |
2019 |
Utpal Kiran, Subhajit Sanfui, Shashi Kant Ratnakar, Sachin Singh Gautam, and Deepak Sharma |
Comparative Analysis of GPU-based Solver Libraries for A Sparse Linear System of Equations |
2nd International Conference on Computational Methods in Manufacturing (ICCMM), 8 – 9 March 2019, IIT Guwahati, India |
496 |
2019 |
S. Sajith, K.S.R.K. Murthy, P.S. Robi |
Accurate Estimation of Mixed Mode Stress Intensity Factors using Crack Flank Displacements |
International Conference on Advances in Material and Manufacturing Engineering (ICAMME-2019), 15-17 March, Kalinga Institute of Industrial Technology, Bhubaneshwar |
497 |
2019 |
M.K. Hussain and K.S.R.K. Murthy |
Numerical examination of sharp V-notches using notch-flank displacement collocation method |
International Conference on Advances in Material and Manufacturing Engineering (ICAMME-2019), 15-17 March, Kalinga Institute of Industrial Technology, Bhubaneshwar |
498 |
2019 |
Sridhar P V S S, Vishnu Nair, Pankaj Biswas, and Pinakeswar Mahanta |
Thermomechanical analyses of Single Sided Single pass Submerged arc welding of AISI 304 Austenitic Stainless Steel |
ICCMM 2019, Mar 8-9, IIT Guwahati. |
499 |
2019 |
Gunjo, D.G., Mahanta, P |
and Robi, P.S., 2019. Designing and Utilizing of the Solar Water Heater for Digestion of Lignocellulosic Biomass.. In Advances in Waste |
Management (pp. 91-105). Springer, Singapore |
500 |
2019 |
V. Singh and S N Joshi |
Computation of End-Cutting-Edge Wear of Single Point Cutting Tool using Image processing |
International Conference on Computational Methods in Manufacturing, March 8-9, 2019, IIT Guwahati |
501 |
2019 |
B Barkachary and S N Joshi |
Numerical Simulation and Experimental Validation of Nanoindentation of Silicon using Finite Element Method |
International Conference on Computational Methods in Manufacturing, March 8-9, 2019, IIT Guwahati |
502 |
2019 |
R. Kalule, S.K. Sarma, A. Iqbal, M. Pandey |
A Study on the Onset of Annular Two-Phase Flow in a Microchannel, |
12th International Conference on Thermal Engineering: Theory and ApplicationsFebruary 23-26, 2019, Gandhinagar, India |
503 |
2019 |
M. Hazarika, U.S. Dixit and J. Paulo Davim |
History of production and industrial engineering through contributions of stalwarts, Manufacturing Engineering Education |
Chandos Publishing |
504 |
2019 |
Deka, H., Biswas, G., Sahu K.C., Kulkarni, Y., and Dalal, A. |
Coalescence Dynamics of a Compound Drop on a Deep Liquid Pool |
Journal of Fluid Mechanics |
505 |
2019 |
U Biswas, A Banerjee, S Pal, A Biswas, D Sarkar, S Haldar (Editors) |
Advances in Computer, Communication and Control - Proceedings of ETES 2018 |
Springer Singapore |
506 |
2019 |
K. K. Gajrani, P. S. Suvin, S. V. Kailas and M. R. Sankar |
Thermal, rheological, wettability and hard machining performance of MoS2 and CaF2 based minimum quantity hybrid nano-green cutting fluids |
Journal of Materials Processing Technology |
507 |
2019 |
U.S. Dixit and R. Ganesh Narayanan |
Strengthening and Joining by Plastic Deformation: Select Papers from AIMTDR 2016 |
Springer, Singapore |
508 |
2019 |
Poonam Kumari, Shranish Kar |
Static behavior of arbitrarily supported composite laminated cylindrical shell panels: An analytical 3D elasticity approach |
Composite Structures |
509 |
2019 |
K. K. Gajrani, P. S. Suvin, S. V. Kailas and M. R. Sankar |
Hard machining performance of indigenously developed green cutting fluid using flood cooling and minimum quantity cutting fluid |
Journal of Cleaner Production |
510 |
2019 |
Deka, H., Tsai, P-H, Biswas, G., Dalal, A., Ray, B., and Wang, A-B. |
Dynamics of Formation and Oscillation of Non-spherical Drops |
Chemical Engineering Science |
511 |
2019 |
N. Alom and U. K. Saha |
Influence of blade profiles on Savonius rotor performance: Numerical simulation and experimental validation |
Energy Conversion and Management |
512 |
2019 |
N. Alom and U. K. Saha |
Evolution and progress in the development of Savonius wind turbine rotor blade profiles and shapes |
ASME Journal of Solar Energy Engineering |
513 |
2019 |
A. Sarkar and U. K. Saha |
A critique on the research activities and potential benefits of dual fuel diesel engine run on biogas and biofuel-blended biodiesel |
ASME Journal of Engineering for Gas Turbines and Power |
514 |
2019 |
V. Kumar, U.S. Dixit and J. Zhang |
Determination of thermal conductivity, specific heat capacity and absorptivity during Laser-based materials processing |
Measurement |
515 |
2019 |
Bhardwaj, S., Dalal, A., and Mukherjee, P. P. |
Mesoscale Understanding of Capillarity Driven Two-phase Flow in a Packed Bed Architecture |
International Journal of Heat and Mass Transfer |
516 |
2019 |
S. Shyam, B. Mehta, P. K. Mondal, S. Wongwises |
Investigation into the thermo-hydrodynamics of ferrofluid flow under the influence of constant and alternating magnetic field by InfraRed Thermography |
International Journal of Heat and Mass Transfer |
517 |
2019 |
V. Kumar, U.S. Dixit and J. Zhang |
Determination of thermal conductivity, absorptivity and heat transfer coefficient during Laser-based manufacturing |
Measurement |
518 |
2019 |
V. Kumar, U.S. Dixit and J. Zhang |
Determination of thermal conductivity, absorpitivity and heat transfer coefficient during laser-based manufacturing |
Measurement |
519 |
2019 |
K. Saikia, M. Pandey, D.N. Basu |
Numerical investigation of the effect of inlet subcooling on flow instabilities in a parallel channel natural circulation boiling system |
Nuclear Engineering and Design |
520 |
2019 |
Nada Barakat and Deepak Sharma |
Modeling and Bi-Objective Optimization of Soil Cutting and Pushing Process for Bulldozer and its Blade |
Journal of The Institution of Engineers (India): Series C |
521 |
2019 |
Deepak Sharma and Nada Barakat |
Evolutionary Bi-Objective Optimization for Bulldozer and its Blade in Soil Cutting |
Journal of The Institution of Engineers (India): Series C |
522 |
2019 |
S. Sajith, K.S.R.K. Murthy and P.S. Robi |
Prediction of accurate mixed mode fatigue crack growth curves using the Paris’ law. |
Journal of The Institution of Engineers (India): Series C. |
523 |
2019 |
S. Dutta, P. K. Mondal, P. Goswami |
Slipping hydrodynamics of Powell-Eyring fluid in a cylindrical microchannel under electrical double layer phenomenon |
Physica Scripta |
524 |
2019 |
Parmananda, M., Dalal, A., and Natarajan, G. |
Numerical appraisal of three low Mach number algorithms for radiative-convective flows in enclosures |
Computers and Mathematics with Applications |
525 |
2019 |
Randive, P., Dalal, A., and Mukherjee, P. |
Probing the Influence of Confinement and Wettability on Droplet Displacement Behavior: A Mesoscale Analysis |
European Journal of Mechanics, B/Fluids |
526 |
2019 |
U Talukdar, SM Hazarika, JQ Gan |
Motor imagery and mental fatigue: inter-relationship and EEG based estimation |
Journal of computational neuroscience |
527 |
2019 |
Manik, J., Dalal, A., and Natarajan, G. |
A Parametric Study on the Droplet Detachment Process from the Ceiling Under the Effect of Gravity |
Engineering Computations |
528 |
2019 |
Ashutosh Kumar |
A Variable Viscosity Technique for the Analysis of Static and Dynamic Performance Parameters of Three-Lobe Fluid Film Bearing Operating with TiO2-Based Nanolubricant |
Springer Singapore Manufacturing Engineering Select Proceedings of CPIE 2018 |
529 |
2019 |
Development of Coupled Steady State Solver Using Hybrid Unstructured Grids |
Development of Coupled Steady State Solver Using Hybrid Unstructured Grids |
|
530 |
2019 |
Ehtesham Hussain, Agyapal Singh and poonam kunari |
Free Vibration Analysis of Functionally Graded Beam using Extended Kantorovich Method |
4th Indian Conference on Applied Mechanics (INCAM), July 3-5, 2019 at IISc Bangalore |
531 |
2019 |
Shranish Kar and Poonam Kumari |
A 3D Solution for Angle-ply Cylindrical Shell Panel Supported Arbitrarily on its Boundaries using Extended Kantorovich Method |
4th Indian Conference on Applied Mechanics (INCAM), July 3-5, 2019 at IISc Bangalore |
532 |
2019 |
Shranish KAR, Poonam KUMARI |
Three Dimensional Bending Solution Of Cylindrical Shell Panel Having Arbitrary Edge Support Conditions Using Extended Kantorovich Method |
10th International Conference on Material for Advanced Technologies, 23 to 28 June, 2019, Marina Bay Sands, Singapore |
533 |
2019 |
M. Jana, B. G. Barua and S. M. Hazarika |
Design and Development of a Finger Exoskeleton for Motor Rehabilitation using Electromyography Signals. |
23rd International Conference on Mechatronics Technology (ICMT), Salerno, Italy. |
534 |
2019 |
V. Agrawal and Sachin S. Gautam |
IGA: A simplified introduction and implementation details for finite element users |
Journal of The Institution of Engineers (India): Series C. |
535 |
2019 |
G. Kumar, S. Shyam, P. K. Mondal |
Impact dynamics of a viscoelastic ferrofluid droplet under the influence of magnetic field |
International Conference on Recent Developments in Mechanical Engineering |
536 |
2019 |
S. Pawar, D. Ray, S.D. Kore, and A. Nandy |
Comparison of Two Different Simulation Methods for The Finite Element Analysis of Electromagnetic Forming and Perforation (EMFP) of Tubes |
International conference on Industry 4.0 and Advanced Manufacturing |
537 |
2019 |
S. Pawar, S.D. Kore, and A. Nandy |
Loose Coupled Simulation Method for FEA of Electromagnetic Forming of Muffler |
7th International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering, AFTMME |
538 |
2019 |
K K Basumatary, K Kalita, S K Kakoty, and S D Garvey |
Vibration mitigation of rotors suspended on low-cost hybrid gas foil bearing |
ASME Gas Turbine India Conference 2019 |
539 |
2019 |
Jasinta Poonam Ekka, Muthukumar P |
Determination of Heat Transfer Coefficient and Drying Kinetics of Red chilli Dried in a Mixed Mode Forced Convection |
International Conference on Polygeneration (ICP-2019), May 15-17, Kyushu University, Japan |
540 |
2018 |
Xiaojing Suo, Hengcheng Liao, Yiyun Hu, Uday S. Dixit, Pavel Petrov |
Formation of Al15Mn3Si2 phase during solidification of a novel Al-12% Si-4% Cu-1.2% Mn heat-resistant alloy and its thermal stability |
Journal of Materials Engineering and Performance |
541 |
2018 |
U Talukdar, SM Hazarika, JQ Gan |
Motor imagery and mental fatigue: inter-relationship and EEG based estimation |
Journal of computational neuroscience |
542 |
2018 |
R. Chakrabarti, P. Biswas, S. C. Saha |
A Review on Welding Residual Stress Measurement by Hole Drilling Technique and its Importance |
Journal of Welding and Joining |
543 |
2018 |
H. K. Narang, M. M. Mahapatra, P. K. Jha, PVSS Sridhar and P. Biswas (2018) , |
Experimental and Numerical Study on Effect of Weld Reinforcement on Angular Distortion of SAW Square butt Welded Plates |
Journal of Welding and Joining, |
544 |
2018 |
A. Singh, P. Kumari |
Two-Dimensional elasticity solution for arbitrarily supported axially functionally graded |
Journal of Solid Mechanics |
545 |
2018 |
Agyapal Singh, Poonam Kumari |
Analytical Solution of Functionally Graded Beam Having Longitudinal Stiffness Variation |
International Journal for Computational Methods in Engineering Science & Mechanics |
546 |
2018 |
Manik, J., Dalal.A., and Natarajan, G. |
A Parametric Study on the Droplet Detachment Process from the Ceiling Under the Effect of Gravity |
Engineering Computations |
547 |
2018 |
Piyush Singh, Pankaj Biswas and Sachin D Kore , |
Influence of Welding Traverse Speed in Self-Reacting Friction Stir Welding of Aluminium alloy AA6061-T6 |
Journal of Ship Production and Design |
548 |
2018 |
Rakesh Bhadra, Pardeep Pankaj, Pankaj Biswas and U. S. Dixit |
Thermo-mechanical analysis of CO2 Laser butt welding on AISI 304 steel thin plates |
Internation Journal of Steel Structures |
549 |
2018 |
K.K. Gajrani, R. P. K. Reddy and M.R. Sankar |
Tribo-mechanical, surface morphological comparison of un-textured, mechanical micro-textured (MµT) and coated-MµT cutting tools during machining |
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology |
550 |
2018 |
Rasmi Ranjan Behera, M. Ravi Sankar, Prahlad Kumar Baruah, Ashwini Kumar Sharma, Alika Khare |
Experimental investigation of nanosecond-pulsed Nd:YAG laser beam micromachining on 304 stainless steel |
Journal of Micromanufacturing |
551 |
2018 |
M. Ravi Sankar, V.K. Jain, J. Ramkumar, Shivesh K. Sareen, Sachin Singh |
Medium rheological characterization and performance study during rotational abrasive flow finishing (R-AFF) of Al alloy and Al alloy/SiC MMCs |
International Journal of Advanced Manufacturing Technology |
552 |
2018 |
Rasmi Ranjan Behera, Abshar Hasan, M. Ravi Sankar, L.M. Pandey |
Laser cladding with HA and functionally graded TiO2-HA precursors on Ti-6Al-4V alloy for enhancing bioactivity and cyto-compatibality |
Surface and Coatings Technology |
553 |
2018 |
Anwesa Barman, Manas Das |
Magnetic field assisted finishing process for super-finished Ti alloy implant and its 3D surface characterization |
The Proceedings of the Institution of Mechanical Engineers |
554 |
2018 |
Anupam Alok, Manas Das |
Multi-objective optimization of cutting parameters during sustainable dry hard turning of AISI 52100 steel with newly develop HSN2coated carbide insert |
Measurement |
555 |
2018 |
G. Ranjan and R. Tiwari |
Application of Active Magnetic Bearings for In-Situ Flexible Rotor Residual Balancing Using a Novel Generalized Influence Coefficient Method |
Inverse Problems in Science & Engineering |
556 |
2018 |
Vikas Prasad and R. Tiwari |
Identification of Speed-Dependent Active Magnetic Bearing Parameters and Rotor Balancing in High-Speed Rotor Systems |
ASME, Journal of Dynamic Systems, Measurement and Control |
557 |
2018 |
R. K. Ojha and S. K Dwivedy |
Dynamic Analysis of Sandwich Plates with Isotropic Skins and Viscoelastic Core |
International Journal of Structural Stability and Dynamics |
558 |
2018 |
W.G. Jiru, M.R. Sankar and U.S. Dixit |
Laser surface alloying of aluminum for improving acid corrosion resistance |
Journal of Institution of Engineers, Series (C) |
559 |
2018 |
Randive. P., Dalal. A , and Mukherjee.P. |
Probing the Influence of Confinement and Wettability on Droplet Displacement Behavior: A Mesoscale Analysis |
European Journal of Mechanics, B/Fluids |
560 |
2018 |
Deka.M., Brahmachary.S., Thirumalaisamy.R., Dalal. A., and Natarajan.G. |
A new Green-Gauss Reconstruction on Unstructured Meshes. Part I: Gradient Reconstruction |
Journal of Computational Physics |
561 |
2018 |
Sachin Singh, Deepu Kumar, M. Ravi Sankar, V.K. Jain |
Viscoelastic medium modeling and surface roughness simulation of microholes finished by abrasive flow finishing process |
International Journal of Advanced Manufacturing Technology |
562 |
2018 |
P. Dinesh, M.R. Behera, P.G. Ranjith, N. Muthu |
An element-free Galerkin method using vertically averaged multiphase flow model for carbon sequestration |
Computers and Geotechnics |
563 |
2018 |
N. Alom and U. K. Saha |
Examining the aerodynamic drag and lift characteristics of a newly developed elliptical-bladed Savonius rotor |
ASME Journal of Energy Resources Technology |
564 |
2018 |
A. Sarkar and U. K. Saha |
A critique on the research activities and potential benefits of dual fuel diesel engine run on biogas and biofuel-blended biodiesel |
ASME Journal of Engineering for Gas Turbines and Power |
565 |
2018 |
S. Sarma, N. Sahoo and A. Unal |
Prediction of impulse heat load on thin film gauges through soft computing technique |
Journal of the Institution of Engineers (India): Series C |
566 |
2018 |
B Kiran Naik, Mrinal Bhowmik, P Muthukumar |
Experimental investigation and numerical modelling on the performance assessments of evacuated U–Tube solar collector systems |
Renewable Energy |
567 |
2018 |
B Kiran Naik, P Muthukumar |
Energy, Entransy and Exergy Analyses of a Liquid Desiccant Regenerator |
International Journal of Refrigeration |
568 |
2018 |
B Kiran Naik, P Muthukumar, C Bhattacharyya |
Thermal modelling and parametric investigations on coupled heat and mass transfer processes occurred in a packed tower |
Heat and Mass Transfer |
569 |
2018 |
S. Sajith, K. S. R. Krishna Murthy and P. S. Robi |
A simple technique for estimation of mixed mode (I/II) stress intensity factors |
Journal of Mechanics of Materials and Structures |
570 |
2018 |
M.K. Hussian and K.S.R.K. Murthy |
A point substitution displacement technique for estimation of elastic notch stress intensities of sharp V-notched bodies |
Journal of Mechanics of Materials and Structures |
571 |
2018 |
Parth Paritosh, Bhaben Kalita and Deepak Sharma |
A Game Theory based Land Layout Optimization of Cities Using Genetic Algorithm |
International Journal of Management Science and Engineering Management |
572 |
2018 |
Nada Barakat and Deepak Sharma |
Evolutionary Multi-Objective Optimization for Bulldozer and its Blade in Soil Cutting |
International Journal of Management Science and Engineering Management |
573 |
2018 |
Nada Barakat and Deepak Sharma |
Modeling and Bi-Objective Optimization of Soil Cutting and Pushing Process for Bulldozer and its Blade |
Journal of The Institution of Engineers (India): Series C |
574 |
2018 |
Deepak Sharma and Nada Barakat |
Evolutionary Bi-Objective Optimization for Bulldozer and its Blade in Soil Cutting |
Journal of The Institution of Engineers (India): Series C |
575 |
2018 |
Muthukumar P, Bukke Kiran Naik, Amarendra Goswami |
Performance Evaluation of a Mechanical Draft Cross Flow Cooling Towers Employed in a Subtropical Region |
Journal of The Institution of Engineers (India) |
576 |
2018 |
Hakeem Niyas, Muthukumar P |
A Novel Encapsulation Technique for Performance Improvements in Latent Heat Storage System |
Solar Energy |
577 |
2018 |
K. K. Gajrani, S. Suresh, M. Ravi Sankar, |
Environmental friendly hard machining performance of uncoated and MoS2 coated mechanical micro-textured tungsten carbide cutting tools |
Tribology International |
578 |
2018 |
W. Jiru, M. Ravi Sankar, U. S. Dixit |
Laser Surface Melting of Al-12Si-4Cu-1.2Mn Alloy |
International Journal of Mechatronics and Manufacturing Systems |
579 |
2018 |
S. Pati, P.K. Mondal |
Limiting thermal characteristics for flow of non-Newtonian fluids between asymmetrically heated parallel plates: An analytical study |
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering |
580 |
2018 |
H.S. Gaikwad, P.K. Mondal, D. N. Basu, N. Chimres, S. Wongwises |
Analysis of the effects of Joule heating and viscous dissipation on combined pressure-driven and electrokinetic flows in a two-parallel plate channel with unequal constant temperatures |
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering |
581 |
2018 |
Vishal Agrawal, Sachin S. Gautam |
Higher-order Hermite enriched contact finite elements for adhesive contact problems, |
International Journal of Materials and Structural Integrity, |
582 |
2018 |
Vishal Agrawal, Sachin S. Gautam |
IGA: A simplified introduction and implementation details for finite element users |
Journal of The Institution of Engineers (India): Series C |
583 |
2018 |
Manish Kumar Dubey and Satyajit Panda |
A balanced laminate of piezoelectric fiber composite for improved shear piezoelectric actuation of beams |
Mechanics of Advanced Materials and Structures. |
584 |
2018 |
S. Behera, P. Kumari |
Free Vibration of Levy-type Rectangular Laminated Plates using Efficient Zig-Zag Theory |
Advances in Computational Design |
585 |
2018 |
Poonam Kumari, Shranish Kar |
Static behavior of arbitrarily supported composite laminated cylindrical shell panels: An analytical 3D elasticity approach |
Composite Structures |
586 |
2018 |
Utpal Kiran, Deepak Sharma, Sachin Singh Gautam |
GPU warp based FE matrices generation and assembly using coloring method |
Journal of Parallel and Distributed Computing |
587 |
2018 |
Vishal Agrawal, Sachin Singh Gautam |
NURBS-enriched contact isogeometric element for adhesive contact problems |
Journal of Aerospace Systems Engineering |
588 |
2018 |
Purnendu Kumar Mandal, P.S. Robi, |
Influence of micro-alloying with silver on microstructure and mechanical Properties of Al-Cu alloy |
Materials Science and Engineering A. |
589 |
2018 |
Arun Kadian & Biswas Pankaj |
The study of material flow behaviour in dissimilar material FSW of AA6061 and Cu-B370 alloys plates |
Journal of Manufacturing Processes |
590 |
2018 |
Avinish Tiwar, Piyush Singh, Pankaj Biswas and Sachin D. Kore |
Friction Stir Welding of AISI 1006 Low Carbon Steel |
1st International Conference on Mechanical Engineering (INCOM 2018), 4- 6 January 2018, Jadavpur University, Jadavpur. |
591 |
2018 |
Saurav Suman , Pankaj Biswas , Basil Kuriachen , Abhijit Sinha, , |
Modelling an arc welded fillet joint for minimum welding induced distorsions |
3rd International Conference on Design, Analysis, Manufacturing and Simulation,ICDAMS 2018,Chennai, INDIA, 6-7 April, 2018. |
592 |
2018 |
U. S. Dixit |
Keynote in National Conference on Applied Sciences, Sustainable & Evolving Technologies |
63rd Annual Technical Session of Assam Science Society, ASSET 2018, March 9-11, 2018, CIT, Kokrajhar |
593 |
2018 |
Chayanika Nath and S. M. Hazarika |
Diagrams: A Hybrid Visual Information Representation and Reasoning Paradigm Towards Video Analysis. Diagrams |
Lecture Notes in Computer Science, (To Appear). Springer, June 18-22, 2018, Edinburgh, UK. |
594 |
2018 |
Lakshmi DVN, Apurba Layek, Muthukumar. P |
Drying of moringa olefera leaves in mixed mode and indirect forced convection solar dryers |
Proceedings of Proceedings of the International Conference on Sustainable Energy and Environmental Challenges (SEEC-2018) 01 – 03, January, 2018, IISc Bangalore |
595 |
2018 |
Kaushik L K, Deb S, Muthukumar P |
Life cycle and techno-economic assessments of domestic and commercial LPG cook-stove with porous radiant burner, |
Proceedings of Proceedings of the International Conference on Sustainable Energy and Environmental Challenges (SEEC-2018) 01 – 03, January, 2018, IISc Bangalore |
596 |
2018 |
M. Ravi Sankar |
Nano-finishing of Bio-Implants using Polymer Rheological Abrasive Complex Suspensions |
4th International Symposium on Advances in Sustainable Polymers (ASP-2018), 8-11 January, 2018, IIT Guwahati, India. |
597 |
2018 |
K.K. Gajrani, A. Kumar, M. Ravi Sankar |
Fabrication of Biodegradable Magnesium Alloy (Az 31) Thin Wall with Minimum Quantity Environmental Friendly Cutting Fluids |
21ST ADNAT Convention and International Symposium on Biodiversity and Biobanking (BIODIVERSE 2018), 27−29 January, 2018, IIT Guwahati, India |
598 |
2018 |
K.K. Gajrani, M. Ravi Sankar |
Cutting Fluid Emissions in Mechanical Machining and its Adverse Effects on Biodiversity |
21ST ADNAT Convention and International Symposium on Biodiversity and Biobanking (BIODIVERSE 2018), 27−29 January, 2018, IIT Guwahati, India. |
599 |
2018 |
R.R. Behera, A.H.L.Pandey, M. Ravi Sankar |
Laser Surface Bio-Coating of Functionally Graded TiO2-HAp on Textured Ti Alloy for Enhancing Bioactivity and Cell Proliferation |
|
600 |
2018 |
M. Bhuyan, A. Sarmah, K.K. Gajrani, A. Pandey, T.G. Thulkar, M. Ravi Sankar |
State of Art on Minimum Quantity Lubrication in Grinding Process |
8th International Conference of Materials Processing and Characterization (ICMPC), 16−18 March, 2018, GRIET Hyderabad, India. |
601 |
2018 |
S. Banik, N. Kalita, K.K. Gajrani, R. Kumar, M. Ravi Sankar |
Recent Trends in Laser Assisted Machining of Ceramic Materials |
8th International Conference of Materials Processing and Characterization (ICMPC), 16−18 March, 2018, GRIET Hyderabad, India. |
602 |
2018 |
M. Ravi Sankar, V.K. Jain , K.P. Rajurkar |
Rheological and Nano-finishing Studies of Elastically Dominant Multiple Polymers Blend Based Abrasive Flow Finishing Medium |
19th CIRP Conference on Electro Physical and Chemical Machining, 23-27 April 2018, Bilbao, Spain, (Accepted). |
603 |
2018 |
Subhajit Sanfui and Deepak Sharma, |
GPU Acceleration of Local Matrix Generation in FEA by Utilizing Sparsity Pattern |
In 1st International Conference on Mechanical Engineering (INCON 2018), 4–6 January 2018, Jadavpur University, India. |
604 |
2018 |
Kumar M., and Gautam S. S. |
Parametric study of ballistic impact using continuum damage mechanics (CDM) model |
Second Quadrennial International Conference on Structural Integrity (ICONS 2018), IIT Madras, Chennai, India, December 14th – 17th, 2018, (accepted). |
605 |
2018 |
Sahu A., Thakur. R, Agrawal V., and Gautam S. S. |
A comparative study of explicit time integration algorithms for non-linear systems |
1st International Conference on Future Learning Aspects of Mechanical Engineering (FLAME - 2018), Amity University, Noida, October 3rd – 5th , 2018, (accepted) |
606 |
2018 |
Saipraneeth G. and Gautam S. S. |
Nonlinear finite element analysis of a gecko spatula adhesion on a rigid substrate |
1st International Conference on Future Learning Aspects of Mechanical Engineering (FLAME - 2018), Amity University, Noida, October 3rd – 5th , 2018, (accepted) |
607 |
2018 |
Bora D., Kumar M., and Gautam S. S. |
Simulation of ductile fracture at high velocity impact of cylindrical tubes |
1st International Conference on Future Learning Aspects of Mechanical Engineering (FLAME - 2018), Amity University, Noida, October 3rd – 5th , 2018, (accepted) |
608 |
2018 |
Agrawal V., and Gautam S. S. |
An isogeometric based study of mortar contact algorithm for frictionless sliding |
1st International Conference on Future Learning Aspects of Mechanical Engineering (FLAME - 2018), Amity University, Noida, October 3rd – 5th , 2018, (accepted) |
609 |
2018 |
Agrawal. V, and Gautam S. S. |
Investigation of contact pressure oscillations with different segment-to-segment based isogeometric contact formulations |
1st International Conference on Numerical Modelling in Engineering, Ghent University, Belgium, August 28th – 29th , 2018. |
610 |
2018 |
Agrawal. V, and Gautam S. S. |
A comparative study of contact problem solution based on different isogeometric contact formulations |
13th World Congress on Computational Mechanics / 2nd Pan American Congress on Computational Mechanics (WCCM 2018)., July 23rd – 27th , 2018. |
611 |
2018 |
Noor, A., and Gautam S. S. |
Finite element analysis of effect of surface roughness on particle erosion of ductile material |
INCOM 2018 1st International Conference on Mechanical Engineering, Jadavpur University, Kolkata, India, January 4th – 6th, 2018 |
612 |
2018 |
P. Dinesh, M.R. Behera, P.G. Ranjith, N. Muthu |
Application of an efficient numerical model for CO2 sequestration in deep saline aquifers |
4th International Conference in Ocean Engineering, IIT Madras, Chennai, India, 2018 |
613 |
2018 |
P. Dinesh, M.R. Behera, P.G. Ranjith, N. Muthu |
An Element-Free Galerkin (EFG) Meshfree Method Model for Carbon Sequestration |
3rd International Conference on Multiphase Flow and Heat Transfer, Budapest, Hungary, 2018 |
614 |
2018 |
Deka.H., Biswas.G., and Dalal.A., |
Oscillation Dynamics of Falling Drops |
Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power, December 10-12, 2018, Indian Institute of Technology Bombay, Mumbai, India |
615 |
2018 |
Sarma. B., Basu. D. N., and Dalal.A., |
Universal Scaling Laws in Drop-on-demand Generation from A Yarn |
Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power, Paper No. FMFP2018-467,December 10-12, 2018, Indian Institute of Technology Bombay, Mumbai, India. |
616 |
2018 |
Shahapure. V., Sarma.B., Basu.D. N., and Dalal.A., |
High Speed Imaging and Analysis of Drop Formation |
Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power,Paper No. FMFP2018-680, December 10-12, 2018, Indian Institute of Technology Bombay, Mumbai, India. |
617 |
2018 |
Deka. H., Biswas.G., and Dalal. A., |
A Coupled Level Set and Volume-of-fluid Method for Modelling Two-phase Flows |
International Conference on Recent Innovations and Developments in Mechanical Engineering, Paper No. IC-RIDME18: 194, November 8 – 10, 2018, National Institute of Technology Meghalaya, Shillong, India. |
618 |
2018 |
Sarma. B., Pokhrel. S., Kumar. S., Dalal. A., Bandyopadhyay. D., and Basu. D. N. |
Prediction of Sauter Mean Diameter of Spray During Electric Discharge Mediated Bursting of a Droplet |
”, Paper No. IC-RIDME18: 251, International Conference on Recent Innovations and Developments in Mechanical Engineering, National Institute of Technology Meghalaya, Shillong, India, November 8 – 10, 2018. |
619 |
2018 |
Parmananda. P., Dalal. A., and Natarajan. G. |
Three-dimensional Analysis of Non-Boussinesq Natural Convection with Radiative Heat Transfer in a Vertical Seven Rod Bundle |
Paper No: IHTC16-23267, 16th International Heat Transfer Conference, Beijing, China. |
620 |
2018 |
Dalal, A.,Gupta A., Mukherjee. P.P. |
Modeling of Thermal Management in Automotive Battery Modules |
Paper No: 538, 4th International Conference on Computational Methods for Thermal Problems, Indian Institute of Science, Bangalore, India. |
621 |
2018 |
Chayanika Nath and S. M. Hazarika |
A Hybrid Visual Information Representation and Reasoning Paradigm Towards Video Analysis. |
Lecture Notes in Computer Science, (To Appear). Springer, June 18-22, 2018, Edinburgh, UK. |
622 |
2018 |
Lakshmi DVN, Apurba Layek, Muthukumar, P |
Evaluation of Convective Heat Transfer Coefficient of Herbs Dried in a Mixed Mode Solar Dryer |
Presented at ICUE 2018 on: Green Energy for Sustainable Development, Phuket, Thailand, 24-26 Oct 2018 |
623 |
2018 |
Kaushik L K, Muthukumar P |
Experimental Analysis of a Porous Radiant Pressurized Cook Stove by Using a Blend of Waste Cooking Oil (WCO) and Kerosene |
Presented at ICUE 2018 on: Green Energy for Sustainable Development, Phuket, Thailand, 24-26 Oct 2018 |
624 |
2018 |
Lav Kumar Kaushik, Muthukumar P |
Performance Assessment of a Porous Radiant Cook Stove Fueled with Blend of Waste Vegetable Oil (WVO) and Kerosene |
Presented at The 10th International Conference on Applied Energy (ICAE2018), 22-25 August 2018, Hong Kong |
625 |
2018 |
Sangjukta Devi, Niranjan Sahoo, Muthukumar P |
Combustion of biogas in Porous Radiant Burner: Low emission combustion |
. Presented at The 10th International Conference on Applied Energy (ICAE2018), 22-25 August 2018, Hong Kong |
626 |
2018 |
Gurpreet Singh Sodhi, Vigneshwaran K, Abhishek Kumar Jaiswal, Muthukumar P |
Assessment of Heat Transfer Characteristics of a Latent Heat Thermal Energy Storage System: Multi Tube Design |
. Presented at The 10th International Conference on Applied Energy (ICAE2018), 22-25 August 2018, Hong Kong |
627 |
2018 |
Nithin N. Raju, Muthukumar P, K. Malleswararao |
Determination of Absorption Conditions for LaNi4.7Al0.3 Based Hydrogen Storage Device: A Numerical Investigation |
5th International Conference on Computation Methods for Thermal Problems (Thermacomp 2018), Bangalore, India, July 9-11, 2018 |
628 |
2018 |
Gurpreet Singh Sodhi, Muthukumar P |
Effect of eccentricity on the charging of a multi tube Latent Heat Storage System |
Presented at 5th International Conference on Computational Methods for Thermal Problems (THERMACOMP – 2018), Indian Institute of Science, Bangalore, July 9-11, 2018 |
629 |
2018 |
Mrinal Bhowmik, Muthukumar P, R Anandalakshmi |
Numerical Study on Dehumidification Performance of a Cross-Flow Liquid Desiccant Adiabatic Dehumidifier with Various Halide Salt desiccants |
Presented at 5th International Conference on Computational Methods for Thermal Problems (THERMACOMP – 2018). IISc Bangalore - 9-11 July, 2018 |
630 |
2018 |
U.S. Dixit |
Keynote in National Conference on Applied Sciences, Sustainable & Evolving Technologies, 63rd Annual Technical Session of Assam Science Society |
ASSET 2018, March 9-11, 2018, CIT, Kokrajhar |
631 |
2018 |
R.R. Behera, A.H., L.Pandey, M. Ravi Sankar, |
Laser Surface Bio-Coating of Functionally Graded TiO2-HAp on Textured Ti Alloy for Enhancing Bioactivity and |
Cell Proliferation” 2018. |
632 |
2018 |
Agrawal. V, and Gautam S. S. |
Comparison of explicit time integration schemes for dynamic problems |
13th World Congress on Computational Mechanics / 2nd Pan American Congress on Computational Mechanics (WCCM 2018)., July 23rd – 27th , 2018.. |
633 |
2018 |
P. Paul, K.S.R.K. Murthy and D. Chakraborty |
Influence of the notch length on the optimal radial location of strain gage in a single edged notched plate |
1st International Conference of Emerging Trends in Mechanical Engineering (ICETME 2018), 20-22 December, SRIT, Anantapur, Andhra Pradesh. |
634 |
2018 |
P. Paul, K.S.R.Krishna Murthy, and Debabrata Chakraborty |
Effect of material properties on optimal radial strain gage locations in sharp V-notched configurations |
3rd International Conference on Design, Analysis, Manufacturing & Simulation (ICDAMS-2018), 6–7 April, Saveetha School of Engineering, Chennai. |
635 |
2018 |
S. Sajith, K.S.R.K. Murthy, P.S. Robi |
Fatigue life prediction under mixed mode loading using equivalent stress intensity factor models |
Proceedings of 3rd International Conference of Design, Analysis, Manufacturing & Simulation (ICDAMS 2018). April 6-7, Saveetha University, Chennai, India |
636 |
2018 |
S Sajith, KSRK Murthy, PS Robi |
Estimation of stress intensity factors from crack flank displacements |
3rd International Conference on Advances in Materials and Manufacturing Applications (IConAMMA 2018) August 16-18, Amrita School of Engineering, Bengaluru, India |
637 |
2018 |
K Gopala Krishna, K Yaswanth, B V K Patnaik, D Chakraborty, K S R K Murthy |
Finite element FCG simulations of turbine disk |
2nd National Aero Propulsion Conference NAPC-2018Dec 17-19, 2018, IIT Kharagpur, West Bengal |
638 |
2018 |
M.K. Hussain and K.S.R.K. Murthy |
Numerical estimation of notch stress intensity factors of sharp V–notches |
Proceedings of 3rd International Conference on Design, Analysis, Manufacturing & Simulation (ICDAMS-2018), 6-7 April, Saveetha School of Engineering, Chennai. |
639 |
2018 |
M. K. Hussain and K. S. R. K. Murthy |
Comparison of some least-squares methods for evaluation of the notch stress intensities of sharp V-notched configurations |
3rd International Conference on Advances in Materials and Manufacturing Applications (IConAMMA-2018), 16–18 August, Amrita School of Engineering, Bengaluru, India |
640 |
2018 |
M.K. Hussain and K.S.R.K. Murthy |
Evaluation of notch stress intensities at sharp V-notches using a point substitution method |
Second International Conference On Structural Integrity (ICONS-2018), 14-17 December, Indian Institute of Technology Madras, Chennai. |
641 |
2018 |
Debabrata Gayen, D. Chakraborty and R. Tiwari |
Parametric study on free vibration and instability of a functionally graded cracked shaft in a rotor-disc-bearing system: finite element approach |
3rd International Conference on Design, Analysis, Manufacturing & Simulation (ICDAMS 2018), April 6-7, 2018, Saveetha University, Chennai, India. Paper No. 161 |
642 |
2018 |
Kishor Kumar Gajrani, Y. Bishal Singha, Mamilla Ravi Sankar and Uday Shanker Dixit, |
Tribological Performance of Graphite, CaF2 and MoS2 Coated Mechanical Micro-Textured Self-Lubricating Cutting Tool Material |
CPIE-2018, 27th June 2018, Bangkok. |
643 |
2018 |
M. Ravi Sankar, Vijay Kumar Jain, K.P. Rajukar |
Rheological and Nano-finishing Studies of Elastically Dominant Multiple Polymers Blend Abrasivve Flow Finishing Medium |
19th CIRP Conference on Electro Physical and Chemical Machining, 23-27 April 2018, Bilbao, Spain. |
644 |
2018 |
Kishor Kumar Gajrani, M. Ravi Sankar, |
Cutting Fluids Emissions in Mechanical Machining and its Adverse Effects on Biodiversity |
21stADNAT Convention and International Symposium on Biodiversity and Biobanking (BIODIVERSE-2018), 27-29 January, IIT Guwahati, India, 2018 |
645 |
2018 |
Sarita Bharti, S Senthilvelan, |
SURFACE DURABILITY OF POLYAMIDE 66 SPUR GEAR UNDER DRY AND OIL LUBRICANT CONDITION |
FISITA 2018 Word Auotmotive Congress, 2-5 October 2018, Chennai,India |
646 |
2018 |
Adidtya Kumar, Karthick Pandia, S Senthilvelan |
BENDING FATIGUE PERFORMANCE OF INJECTION-MOLDED CARBON NANOTUBE REINFORCED POLYPROPYLENE SPUR GEARS |
FISITA 2018 Word Auotmotive Congress, 2-5 October 2018, Chennai,India |
647 |
2018 |
Anwesa Barman, Manas Das |
Analysis of forces during spot finishing of titanium alloy using novel tool in magnetic field assisted finishing process, |
Proceedings of the 13th Manufacturing Science and Engineering Conference MSEC2018, June 18-22, 2018, Texas A&M University, College Station, TX, USA, paper ID MSEC2018-6352. |
648 |
2018 |
S. Shyam, B. Mehta and P. K. Mondal |
Thermohydrodynamics of ferrofluidic flow with periodic pulsation under the effect of static and alternating magnetic field-: a numerical study |
Proceedings of the 16th International Heat Transfer Conference, IHTC-16 August 10-15, 2018. |
649 |
2018 |
P.V.S.S.Sridhar, Shailesh kumar, Kaushik Pal, Bhaskar Kumar Chakraborthy, Rituraj Bhattacharjee, Subhashis Majumder, Pankaj Biswas, Pinakeshwar Mahanta |
Experimental Investigation and Mechanical Characterization of Double Sided Submerged Arc Welding of AISI 304 Austenitic Stainless Steel” |
AIMTDR-2018, December 13-15, College of Engineering, Anna University,Chennai |
650 |
2018 |
Pardeep Pankaj and Pankaj Biswas |
Study of thermally induced residual stress and deformation in the CO2 laser welding of AISI 304 stainless steel thin plates |
AIMTDR-2018, December 13-15, College of Engineering, Anna University,Chennai |
651 |
2018 |
Pardeep Pankaj and Pankaj Biswas |
Dissimilar FSW od DH36 shipbuilding steel and mild steel |
AIMTDR-2018, December 13-15, College of Engineering, Anna University,Chennai |
652 |
2018 |
Nandan Kanan Das, Arun Kadian, Avinish Tiwari, Pardeep Pankaj and Pankaj Biswas |
Transient Thermal Analysis of Friction stir welding of AA6061 |
CPIE-2018, Thiland, Bankok. |
653 |
2018 |
Avinish Tiwari, Pardeep Pankaj , Nandan Kanan Das and Pankaj Biswas |
Joint Quality Evaluation of Shipbuilding Grade DH36 Steel Using WC-10% Co Alloy Based FSW Tool |
AIMTDR 2018, Anna University, Chennai |
654 |
2018 |
Kumar Abhishek and Biswas Pankaj |
Effect of Process Parameters of Plasma Arc Preheating on Low Carbon Steel |
International Conference on Computational Methods in Manufacturing March 8-9, IIT Guwahati |
655 |
2018 |
Avinish Tiwari, Pardeep Pankaj, Piyush Singh, Pankaj Biswas and Sachin D. Kore |
FSW of DH36 shipbuilding grade steel |
5th International Conference on Production and Industrial Engineering (CPIE-2018), 26-29 June Bangkok, Thailand |
656 |
2018 |
Saurav Suman, Avinish Tiwari, Pardeep Pankaj, Pankaj Biswas |
Numerical study of welding distortion in saw welded creep strength enhanced ferrite steel joint |
International Conference on Recent Innovations and Developments in Mechanical Engineering, Nov-18, NIT Meghalaya. |
657 |
2018 |
Saurav Suman, Pardeep Pankaj, Avinish Tiwari, Pankaj Biswas, Basil Kuriachen, Abhijit Sinha |
Effect of pre and post welding processes on the distortion pattern in a SAW welded butt joint of P91 steel plate |
AIMTDR, Dec-18 Anna University |
658 |
2018 |
Bordoloi D.J. and R. Tiwari |
Monitoring of Induction Motor Mechanical and Electrical Faults by Optimum Multiclass-Support Vector Machine Algorithms Using Genetic Algorithm, Proceedings of IFToMM |
10th International Conference on Rotordynamics, September 23-27, 2018, Rio de Janeiro, Brazil. |
659 |
2018 |
P. Gangsar and R. Tiwari |
Performance Analysis of Support Vector Machine and Wavelet Packet Transform based Fault Diagnostics of Induction Motor at Various Operating Conditions |
Proceedings of IFToMM 9th International Conference on Rotordynamics, September 23-27, 2018, Rio de Janeiro, Brazil |
660 |
2018 |
J. S. Rapur and R. Tiwari, Multi Fault |
Diagnosis of Centrifugal Pumps with Time, Frequency and Wavelet based Features using Support Vector Machines |
Proceedings of IFToMM 9th International Conference on Rotordynamics, September 23-27, 2018, Rio de Janeiro, Brazil. |
661 |
2018 |
N. Sarmah and R. Tiwari |
Identification of Crack and Internal Damping Parameters using Full Spectrum Responses from a Jeffcott Rotor Integrated with an Active Magnetic Bearing |
Proceedings of IFToMM 9th International Conference on Rotordynamics, September 23-27, 2018, Rio de Janeiro, Brazil |
662 |
2018 |
Siva Srinivas R. and R. Tiwari |
Identification of Coupling Parameters in Flexibly Coupled Jeffcott Rotor Systems with Angular Misalignment and Integrated Through Active Magnetic Bearing, |
Proceedings of IFToMM 9th International Conference on Rotordynamics, September 23-27, 2018, Rio de Janeiro, Brazil. |
663 |
2018 |
P. Dinesh, M.R. Behera, P.G. Ranjith, N. Muthu |
Multiscale modelling of fracture in wet porous media |
1st International Symposium on In-situ Modification of Deposit Properties for Improving Mining 2018 (IMDPIM2018), Taiyuan, China, 2018. |
664 |
2018 |
A Mahapatro, P. Mahanta |
Effect of Distributor Plate Design on The Hydrodynamics of A Pressurized Circulating Fluidized Bed |
International Conference on Sustainable Energy and Environment Sensing,SEES-2018,18-19 June, 2018 at Fitzwilliam College, University of Cambridge, in Cambridge city, United Kingdom |
665 |
2018 |
Bhaben Kalita and S. K. Dwivedy |
Dynamic Analysis of a Parametrically Excited Golden Muga Silk Embedded Pneumatic Artificial |
The 14th International Conference on Vibration Engineering and Technology of Machinery (VETOMAC XIV), Lisbon, Portugal, September 10-13, 2018 |
666 |
2018 |
S. Mohanty and S. K Dwivedy, |
Nonlinear analysis of a hybrid vibration absorber for super-harmonic resonance condition Western Pacific Commission for Acoustics (WESPAC 2018), CSIR-National Physical Laboratory |
New Delhi, India,November 2018 |
667 |
2018 |
Y Gawade, Sudip Shyam, Balkrishna Mehta |
Pressure Characteristics of Single Isolated Ferrofluidic Slug under the Influence of External Magnetic Feild |
, 7th International and 45th national conference on Fluid Mechanics and Fluid power, Dec 10-12, 2018, IIT Bombay |
668 |
2018 |
D. Shankar, M. Pandey, D.N. Basu |
Coupled-Neutronic-Thermalhydraulic Stability Appraisal of Supercritical Forced Flow Channels Following Lumped Parameter Approach |
Proceedings of 16 International Heat Transfer Conference (IHTC-16), Beijing, China, August 10-15, 2018, Paper ID IHTC16-23961 |
669 |
2018 |
Hotta, S. K., Rout, A. K., Sahoo, N., Mohanty K |
Effect of compression ratio on the cyclic variability and thermal efficiency of a biogas fueled spark igniton engine |
7th International and 45th National Conference on Fluid Mechanics and Fluid Power, Dec 10-12, 2018, Indian Institute of Technology, Bombay, India |
670 |
2018 |
Arnab Kr. De |
A diffuse interface immersed boundary method for complex moving boundary problems |
Journal of computational Physics , Vol. 366, 226-251, 2018. |
671 |
2018 |
A. K. De, V. Eswaran and P. K. Mishra |
Dynamics of plumes in turbulent Rayleigh-Bénard convection |
European Journal of Mechanics - B/Fluids , vol. 72, 164-178, 2018 |
672 |
2018 |
R. Kumar, M. Pandey |
Three Dimensional Simulation of a Condensing Taylor Bubble in a Microchannel |
Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power December 10-12, 2018, IIT Bombay, Mumbai, India |
673 |
2018 |
D. Shankar, M. Pandey, D.N. Basu |
configurations |
Annals of Nuclear Energy |
674 |
2018 |
Prakash Kumar Sahu and Sukhomay Pal |
Effect of FSW Parameters on Microstructure and Mechanical Properties of AM20 welds |
Journal of Materials and Manufacturing Processes |
675 |
2018 |
D. K. Yaduwanshi, S. Bag and Sukhomay Pal |
On the effect of tool offset in hybrid FSW of copper and aluminium alloy |
Journal of Materials and Manufacturing Processes |
676 |
2018 |
K.K. Gajrani, M.R. Sankar and U.S. Dixit |
Environmentally friendly machining with MoS2 filled mechnaically micro-textured cutting tools |
Journal of Mechnical Science and Technology |
677 |
2018 |
H. Deka, B. Ray, G. Biswas, and A. Dalal |
Dynamics of tongue shaped cavity generated during the impact of high-speed microdrops |
Physics of Fluids |
678 |
2018 |
Bhardwaj, S., Dalal, A., Mukherjee, P. P., and Biswas, G. |
Analysis of Droplet Dynamics in a Partially Obstructed Confinement in a Three-dimensional Channel |
Physics of Fluids |
679 |
2018 |
M. P. Borthakur, G. Biswas and D. Bandyopadhyay |
Dynamics of drop formation from submerged orifices under the influence of electric field |
Physics of Fluids |
680 |
2018 |
S. Pandian, S. L. N. Desikan and N. Sahoo |
Experimental investigation of starting characteristics and wave propagation from a shallow open cavity and its acoustic emission at supersonic speed |
Physics of Fluids |
681 |
2018 |
R. Sarma, N. Deka, K. Sarma, P. K. Mondal |
Electroosmotic flow of Phan-Thien–Tanner fluids at high zeta potentials: An exact analytical solution |
Physics of Fluids |
682 |
2018 |
G. Kunti, P. K. Mondal, A. Bhattacharya, S. Chakraborty |
Electrothermally modulated contact line dynamics of a binary fluid in a patterned fluidic environment |
Physics of Fluids |
683 |
2018 |
P. K. Mondal, S. Chaudhry |
Effects of gravity on the thermo-hydrodynamics of moving contact lines |
Physics of Fluids |
684 |
2018 |
Kotoky, S., Dalal, A., and Natarajan, G. |
Effects of Specularity and Particle-particle Restitution Coefficients on the Hydrodynamic Behavior of Dispersed Gas-particle Flows Through Horizontal Channels |
Advanced Powder Technology |
685 |
2018 |
Kotoky, S., Dalal, A., and Natarajan, G. |
A Parametric Study of Dispersed Laminar Gas-Particle Flows Through Vertical and Horizontal Channels |
Advanced Powder Technology |
686 |
2018 |
Kotoky, S., Dalal, A., and Natarajan, G. |
Effects of Specularity and Particle-particle Restitution Coefficients on the Recirculation Characteristics of Dispersed Gas-particle Flows Through a Sudden Expansion |
Advanced Powder Technology |
687 |
2018 |
R. Vignesh Babu, Avanish Verma Kunwar, M. Charan, S. Kanagaraj |
Tweaking the diameter and concentration of carbon nanotubes and sintering duration in Copper based composites for heat transfer applications |
Advanced Powder Technology |
688 |
2018 |
S Kirtania and D Chakraborty |
Determination of Thermoelastic Properties of Carbon Nanotube/Epoxy Composites Using Finite Element Method |
|
689 |
2018 |
A. Bisht, V. Yadav, S. Suwas and U.S. Dixit |
Deformation behavior of AM30 magnesium alloy |
Journal of Materials Engineering and Performance |
690 |
2018 |
Arup Nandy, C. S. Jog |
Conservation Properties of the Trapezoidal Rule for Linear Transient Electromagnetics |
Journal of Advances in Mathematics and Computer Science |
691 |
2018 |
Borgohain, P., Dalal, A., Natarajan, G., and Gadgil, H. |
Numerical assessment of mixing performances in cross-T microchannel with curved ribs |
Microsystem Technologies |
692 |
2018 |
Devarshi Kashyap, P. Kishore Kumar, and S. Kanagaraj |
4D printed porous radiopaque shape memory polyurethane for endovascular embolization |
Additive Manufacturing |
693 |
2018 |
S. Panda, A Kumar |
A design of active constrained layer damping treatment for vibration control of circular cylindrical shell structure |
Journal of Vibration and Control |
694 |
2018 |
A Kumar, S Panda, V Narsaria, A Kumar |
Augmented constrained layer damping in plates through the optimal design of a 0-3 viscoelastic composite layer. |
Journal of Vibration and Control |
695 |
2018 |
Pranab K. Mondal, Somchai Wongwises |
Assesment of Thermodynamic Irreversibility in a Micro-Scale Viscous Dissipative Circular Couette Flow |
Entropy |
696 |
2018 |
Gunjo, D.G., Jena, S.R., Mahanta, P. and Robi, P.S., |
Melting enhancement of a latent heat storage with dispersed Cu, CuO and Al2O3 nanoparticles for solar thermal application. |
IEEE Sensors Journal, |
697 |
2018 |
Hotta, S.K., Sahoo, N. and Mohanty, K. |
Ignition Advancement Study for Optimized Characteristics of a Raw Biogas Operated Spark Ignition Engine |
Journal of green energy |
698 |
2018 |
Parmananda, M., Dalal, A., and Natarajan. G. |
Numerical appraisal of three low Mach number algorithms for radiative-convective flows in enclosures |
Computers and Mathematics with Applications |
699 |
2018 |
H. S. Gaikwad, A. Roy, P. K. Mondal, N. Chimres, S. Wongwises |
Irreversibility analysis in a slip aided electroosmotic flow through an asymmetrically heated microchannel: The effects of joule heating and the conjugate heat transfer |
Analytica Chimica Acta |
700 |
2018 |
Agyapal Singh, Poonam Kumari, and Rupam Hazarika |
Analytical Solution for Bending Analysis of Axially Functionally Graded Angle-Ply Flat Panels |
Mathematical Problems in Engineering |
701 |
2018 |
J. S. Rapur and R. Tiwari |
On-line Time Domain Vibration and Current Signals Based Multi-Fault Diagnosis of Centrifugal Pumps using Support Vector Machines |
Journal of Nondestructive Evaluation |
702 |
2018 |
Saurav Suman, Avinish Tiwari, Pardeep Pankaj, Pankaj Biswas, Basil Kuriachen, Abhijit Sinha |
Modelling of welding sequences for minimization of weld induced distortions and residual stresses |
AIMTDR, Dec-18, Anna University |
703 |
2018 |
Bhaben Kalita and S. K. Dwivedy |
Forced Vibration Analysis of a Silk Fibre Embedded Pneumatic Artificial Muscle |
The 6th International Conference on Robot Intelligence Technology and Applications (RITA 2018), Putrajaya, Malaysia, December 16-18, 2018 |
704 |
2018 |
S. Mohanty, S. Sikder and S. K Dwivedy |
Nonlinear analysis of rotational inertial double tuned mass damper by Harmonic balance method. |
First International Conference on Recent Innovations & Developments in Mechanical Engineering (IC-RIDME 2018), NIT Meghalaya, India,November 2018 |
705 |
2018 |
A. Garg and S. K. Dwivedy |
Theoretical and Experimental Investigation of ParametricallyExcited Piezoelectric Energy Harvester |
The 14th International Conference on VibrationEngineering and Technology of Machinery, VETOMAC XIV 2018, Lisbon, Portugal. DOI: 10.1051/matecconf/201821102009 |
706 |
2018 |
Sudip Shyam, Balkrishna Mehta and Pranab Mondal |
Thermo-hydrodynamics of ferrofluidic flow with periodic pulsation under the effect of static and alternating magnetic field |
conference, IHTC 18, Beijing China, August 2018 |
707 |
2018 |
Debabrata Chakraborty, Debaleena Chakraborty, and K. S R. K. Murthy |
A finite element based procedure for accurate determination of mode I SIF of orthotropic materials based on two parameter strain series |
9th ICCM 2018, August 6-10, 2018, University of Sapienza, Rome, Italy |
708 |
2018 |
D. Hirakh, Mahanta. P |
EFFECT of SUPERFICIAL VELOCITY on the HYDRODYNAMIC BEHAVIOUR of a CONICAL FLUIDIZED BED: EXPERIMENTAL and NUMERICAL STUDIES |
Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP) December 10-12, 2018, IIT Bombay, Mumbai, India, PAPER NO. 826 |
709 |
2018 |
Haque N, Singh A, and Saha UK |
Particle image velocimetry investigation of fluid flow in fractured porous media |
7th International and 45th National Conference on Fluid Mechanics and Fluid Power, December 10-12, IIT Bombay, Mumbai, India. |
710 |
2018 |
Talukdar PK, Rathod UH, Kulkarni V, and Saha UK |
Performance evaluation of vented Savonius wind turbines through wind tunnel testing |
7th International and 45th National Conference on Fluid Mechanics and Fluid Power, December 10-12, IIT Bombay, Mumbai, India. |
711 |
2018 |
Dabi M and Saha UK |
Performance and emission characteristics of a compression ignition engine run on vegetable oil-diesel blends and diethyl ether, |
7th International and 45th National Conference on Fluid Mechanics and Fluid Power, December 10-12, IIT Bombay, Mumbai, India. |
712 |
2018 |
Haque N, Singh A, and Saha UK |
A noble method for rapid prototyping of porous micromodels applicable to enhanced oil recovery, |
International Conference on Recent Advances in Fluid and Thermal Sciences, December 5 – 7, Dubai, UAE |
713 |
2018 |
Talukdar PK, Kulkarni V, and Saha UK |
Performance characteristics of vertical-axis off-shore Savonius wind and Savonius hydro-kinetic turbines |
Paper No. OMAE2018-78497, ASME 37th International Conference on Ocean, Offshore and Arctic Engineering, June 17 – 22, Madrid, Spain |
714 |
2018 |
Alom N, Borah B, and Saha UK |
An insight into the drag and lift characteristics of modified Bach and Benesh profiles of Savonius wind rotor |
4th International Symposium on Hydrogen Energy, Renewable Energy and Materials (HEREM), June 13 – 14, Bangkok, Thailand |
715 |
2018 |
Hotta, S. K., Sahoo, N., Mohanty K., Mahanta, P |
Effect of compression ratio on the performance of a constant speed spark ignition engine operating on raw biogas |
2nd International Conference on Sustainable Energy and Environmental Challenges, Jan 01-03, 2018, Indian Institute of Science, Bangalore, India |
716 |
2018 |
N. Bhardwaj, R. Ganesh Narayanan and U.S. Dixit |
Refilling of pinhole in friction stir spot welding using waste chips, |
7th International and 28th All India Manufacturing Technology, Design and Research (AIMTDR) Conference, December 13-15, 2018, Anna University, Chennai. |
717 |
2018 |
G.C. Verma, P.M. Pandey and U.S. Dixit, |
Experimental investigations to evaluate machining accuracy of ultrasonic assisted milling on thin-walled structures |
7th International and 28th All India Manufacturing Technology, Design and Research (AIMTDR) Conference, December 13-15, 2018, Anna University, Chennai. |
718 |
2018 |
F. Chen, J. Zhang, M. Wu, X. Chu and U.S. Dixit |
Design of open battery pack interface for electric vehicle personalization |
7th International and 28th All India Manufacturing Technology, Design and Research (AIMTDR) Conference, December 13-15, 2018, Anna University, Chennai. |
719 |
2018 |
A. Raj, A. Ch Borsaikia and U.S. Dixit |
Manufacturing of autoclaved aerated concrete (AAC): present status and future trends |
7th International and 28th All India Manufacturing Technology, Design and Research (AIMTDR) Conference, December 13-15, 2018, Anna University, Chennai. |
720 |
2018 |
Susant Behera, Poonam Kumari |
Free Vibration Analysis of Levy-type Hybrid Plates using Three-dimensional Extended Kantorovich Method |
Second International Conference On Structural Integrity, ICONS2018, IIT Madras, 14-18 December, 2018 |
721 |
2018 |
Ahmed F. and Kalita K |
Controllability of Radial Displacement in Bearingless Switched Reluctance Motor with Bridge Configured Winding |
August 2018, International symposium on Magnetic Bearings 16 (ISMB16), Beijing, China. |
722 |
2018 |
G. Bolar and S. N. Joshi |
An Experimental Investigation on Productivity and Product Quality during Thin-Wall Machining of Aluminum alloy 2024-T351 |
7th International and 28th All India Manufacturing Technology, Design and Research (AIMTDR) Conference, December 13-15, 2018, Anna University, Chennai. |
723 |
2018 |
U. Sarma and S. N. Joshi |
Effect of Laser Parameters on Laser Induced Plasma Assisted Ablation (LIPAA) of Glass |
7th International and 28th All India Manufacturing Technology, Design and Research (AIMTDR) Conference, December 13-15, 2018, Anna University, Chennai. |
724 |
2018 |
S. Das and S N Joshi |
Thermal modelling and simulation of crater generation on wire electrode during wire EDM operation |
7th International and 28th All India Manufacturing Technology, Design and Research (AIMTDR) Conference, December 13-15, 2018, Anna University, Chennai. |
725 |
2018 |
B. Barkachary and S N Joshi |
Numerical modeling and simulation of plunge cutting of silicon using finite element method |
International Conference on Recent Innovations & Developments in Mechanical Engineering (IC-RIDME 2018) during November 8-10, 2018, NIT Meghalaya |
726 |
2018 |
J. Kumar, S. Das and S N Joshi |
Three-dimensional numerical modelling of temperature profiles on the wire electrode during wire electric discharge machining process |
International Conference on Recent Innovations & Developments in Mechanical Engineering (IC-RIDME 2018) during November 8-10, 2018, NIT Meghalayaa |
727 |
2018 |
U. Sarma and S N Joshi |
Two-dimensional numerical investigation on the effect of laser parameters during laser indirect machining of glass |
International Conference on Recent Innovations & Developments in Mechanical Engineering (IC-RIDME 2018) during November 8-10, 2018, NIT Meghalaya |
728 |
2018 |
A. Iqbal, S. K. Sarma and M. Pandey |
Non-adiabatic Flow Characteristics of Dielectric Fluids in Trapezoidal Microchannel |
Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power December 10-12, 2018, IIT Bombay, Mumbai, India |
729 |
2018 |
A. Kumar, R. Gupta, A. Iqbal, S. K. Sarma and M. Pandey |
µ-PIV Measurement in a Microtube. |
Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power December 10-12, 2018, IIT Bombay, Mumbai, India |
730 |
2018 |
K. Saikia, D.N. Basu, M. Pandey |
Effect of Subcooling on the Instabilities of a Two-Phase Natural Circulation System |
Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power December 10-12, 2018, IIT Bombay, Mumbai, India |
731 |
2018 |
S. Ahmed, M. Pandey |
Study of Transport Phenomena in the Evaporator of Two-phase Capillary Devices using Thin Film Evaporation Model, |
Joint 19th International Heat Pipe Conference and 13th International Heat Pipe Symposium, Pisa, Italy, June 10-14, 2018 |
732 |
2018 |
Niraj Kumar Mishra, P Muthukumar, Snehasish Panigrahy |
A Review on Clean Combustion Within Porous Media |
Air Pollution and Control |
733 |
2018 |
G Bolar, SN Joshi |
Numerical Modeling and Experimental Validation of Machining of Low-Rigidity Thin-Wall Parts |
Precision Product-Process Design and Optimization |
734 |
2018 |
T. saikia, M. Baruah, S. Bag |
On the effect of heat input in plasma microwelding of maraging steel |
Proceedings of IMechE, Part B: Journal of Engineering Manufacture |
735 |
2018 |
Hotta, S.K., Sahoo, N. and Mohanty, K. |
Comparative assessment of a spark ignition engine fueled with gasoline and raw biogas |
Renewable Energy |
736 |
2018 |
S.S. Pande and U.S. Dixit (Editors) |
Precision Product-Process Design and Optimization: Select Papers from AIMTDR 2016 |
Springer, Singapore |
737 |
2018 |
U.S. Dixit and R. Kant (Editors) |
Simulations for Design and Manufacturing: Select Papers from AIMTDR 2016 |
Springer, Singapore |
738 |
2018 |
NK Mishra, P Muthukumar, Snehasish Panigrahy |
A Review on Clean Combustion Within Porous Media |
Springer Nature Singapore Pte Ltd. |
739 |
2018 |
P. S. Robi, Sukhomay Pal, and Biswajit Parida |
Recent Trends and Advances in Friction Stir Welding and Friction Stir Processing of Metals |
CRC Press |
740 |
2018 |
Devarshi Kashyap, Charan Mukundan and S.Kanagaraj |
Manufacturing and characterization of shape memory polymers and composites |
CRC press |
741 |
2018 |
Kishor Kumar Gajrani, Mamilla Ravi Sankar |
Encyclopedia of Renewable and Sustainable Materials |
Elsevier |
742 |
2018 |
Achinta Sarkar, Maryom Dabi and Ujjwal K. Saha |
Supplementing the energy need of diesel engines in Indian transport and power sectors |
Springer |
743 |
2018 |
Kishor Kumar Gajrani, Y Bishal Singha, Mamilla Ravi Sankar, Uday Shanker Dixit |
Tribological and Machining Performance of Graphite, CaF2 and MoS2Coated Mechanical Micro-textured Self-Lubricating Cutting Tool |
Springer |
744 |
2018 |
Chandan Kumar, Manas Das, C. P. Paul, B. Singh |
Experimental study of fiber laser beam welding of 5 mm thick Ti-6Al-4V alloy, Applications of Lasers in Manufacturing |
Springer |
745 |
2018 |
D. Sam Dayala Dev, Enni Krisha, Manas Das |
Novel Finishing Process Development for Precision Complex-Shaped Hemispherical Shell by Bulk Plasma Processing, Precision Product-Processes Design and Optimization |
Springer |
746 |
2018 |
Manas Das, U. S. Dixit |
Advanced Machining Processes, Introduction to Mechanical Engineering |
Springer |
747 |
2018 |
Jana, K., Mahanta, P. and De, S |
Role of Biomass for Sustainable Energy Solution in India |
Springer, Singapore. |
748 |
2018 |
Mallick, D., Buragohain, B., Mahanta, P. and Moholkar, V.S., |
Gasification of Mixed Biomass: Analysis Using Equilibrium, Semi-equilibrium, and Kinetic Models |
Springer, Singapore. |
749 |
2018 |
Mallick, D., Mahanta, P. and Moholkar, V.S |
Synergistic Effects in Gasification of Coal/Biomass Blends: Analysis and Review |
Springer, Singapore. |
750 |
2018 |
Muthukumar P, Hakeem Niyas |
Materials, Design and Development of Latent Heat Storage Systems for Medium and Large-scale Applications: Issues and Challenges |
Elsevier |
751 |
2018 |
Avinish Tiwari, Piyush Singh, Pankaj Biswas, and Sachin D. Kore, |
Friction stir welding of low carbon steel”: Multidisciplinary Industrial Engineering 978-3-319-96967-1, 453805_1_En, (10), (2018) (Accepted). |
|
752 |
2018 |
Avinish Tiwari, Piyush Singh, Pankaj Biswas, and Sachin D. Kore, |
“Friction stir welding of shipbuilding grade DH36 steel: Multidisciplinary Industrial Engineering (2018)(Accepted). |
|
753 |
2018 |
Pardeep Pankaj, Rakesh Bhadra, Avinish Tiwari, Pankaj Biswas, and Sachin D. Kore, |
“Transient thermal analysis of CO2 laser welding of AISI 304 stainless steel thin steel: Lecture Notes on Multidisciplinary Industrial Engineering (2018) |
|
754 |
2018 |
Pardeep Pankaj, Rakesh Bhadra, Avinish Tiwari, Pankaj Biswas, and Sachin D. Kore, |
“Dissimilar friction stirs welding of DH36 shipbuilding steel and Mild steel: Lecture Notes on Multidisciplinary Industrial Engineering (2018) xx.xxx (Accepted) |
|
755 |
2018 |
Nandan Kanan Das, Arun Kadian, Avinish Tiwari, Pardeep Pankaj and Pankaj Biswas, |
“Transient Thermal Analysis of Friction stir welding of AA6061”: Manufacturing Engineering 978-3-319-96967-1, 453805_1_En, (10), (2018) |
|
756 |
2018 |
K K Basumatary, S K Kakoty and K Kalita |
Stability Analysis of a Rigid Rotor Supported on Gas Foil Bearings under Different Loading Conditions |
Springer, Singapore. |
757 |
2018 |
S.M. Hazarika and U.S. Dixit |
Robotics: history, trends and future directions, Introduction to Mechanical Engineering, Edited by J. Paulo Davim |
Springer London |
758 |
2018 |
Bolar G. and Joshi S. N |
Numerical Modeling and Experimental Validation of Machining of Low-Rigidity Thin-Wall Parts". In: Pande S. S. and Dixit U. S. eds. Precision Product-Process Design and Optimization. Springer, pp. 99-122. |
|
759 |
2018 |
Kant R. and Joshi S. N. |
A Numerical Investigation into the Effect of Forced Convection Cooling on the Performance of Multi-scan Laser Bending Process". In: Dixit U. S., Joshi S. N. and Davim J. P. eds. Application of Lasers in Manufacturing. Springer, pp. 21-43. |
|
760 |
2018 |
Varun Sharma, Pulak M. Pandey, Uday S. Dixit, Anish Roy, Vadim V. Silberschmidt, |
Ultrasonic assisted turning: a comparative study of surface integrity, in Precision Product-Process Design and Optimization: Select Papers from AIMTDR 2016, |
Springer Singapore |
761 |
2018 |
T.K. Gogoi and U.S. Dixit |
Basics and applications of thermal engineering, Introduction to Mechanical Engineering, Edited by J. Paulo Davim |
Springer London |
762 |
2018 |
M. Das and U.S. Dixit |
Advanced machining processes, Introduction to Mechanical Engineering, Edited by J. Paulo Davim, |
Springer London |
763 |
2018 |
Deb, S., Kalita, K., & Mahanta, P |
Distribution Network Planning in presence of Electric Vehicle Charging station loads. In Smart Power Distribution Systems |
Elsevier |
764 |
2018 |
A. Das, A. Kumar, G. P. Bharti, R. R. Behera, M. Ravi Sankar, A. Khare, D. Pamu, |
Effect of thickness on optical and microwave dielectric properties of Hydroxyapatite films deposited by RF magnetron sputtering |
Journal of Alloys and Compounds |
765 |
2018 |
Apurba Das, Anil Kumar Chikkala, Gyan Prakash Bharti, Rasmi Ranjan Behera, M. Ravi Sankar, Alika Khare, Pamu Dobbidi |
Effect of Thickness on Optical and Microwave Dielectric Properties of Hydroxiapetite Films Deposited by RF Magnetron Sputtering |
Journal of Alloys and Compounds |
766 |
2018 |
Guangjin Li, Hengcheng Liao, Xiaojing Suo, Yunyi Tang, Uday S. Dixit and Pavel Petrov |
Cr-induced morphology change of primary Mn-rich phase in Al-Si-Cu-Mn heat resistant aluminum alloys and its contribution to high temperature strength |
Materials Science & Engineering A |
767 |
2018 |
A Bhowmick, SM Hazarika |
E-mail spam filtering: a review of techniques and trends |
Springer Lecture Notes in Electrical Engineering |
768 |
2018 |
Arnab Chanda and S. K. Dwivedy |
Nonlinear dynamic analysis of flexible workpiece and tool in turning operation with delay and internal resonance |
Journal of Sound and Vibration |
769 |
2018 |
Arnab Kr. De |
A diffuse interface immersed boundary method for complex moving boundary problems |
Journal of Computational Physics |
770 |
2018 |
Kumar, A., Singh, A., Kumar, A., Singh, M.K., Mahanta, P. and Mukhopadhyay, S.C. |
Sensing Technologies for Monitoring Intelligent Buildings: A Review. |
Bioresource technology |
771 |
2018 |
R. Vignesh Babu, S. Kanagaraj |
Thermal, electrical and mechanical characterization of microwave sintered Copper/carbon nanotubes (CNT) composites against sintering duration, CNT diameter and its concentration. |
Journal of Materials Processing Tech |
772 |
2018 |
U.S. Dixit, S.N. Joshi and J. Paulo Davim (Eds.) |
Application of Lasers in Manufacturing: Select Papers from AIMTDR 2016 |
Springer, Singapore |
773 |
2018 |
A. Sarkar and U. K. Saha |
Role of global fuel-air equivalence ratio and preheating on the behavior of biogas fueled diesel engine under dual fuel mode |
Fuel |
774 |
2018 |
Thirumalaisamy, R., Natarajan, G., and Dalal, A. |
A Charge-conservative Approach for Simulating Electrohydrodynamic Two-phase Flows Using Volume-of-fluid |
Journal of Computational Physics |
775 |
2018 |
M.P. Borthakur, D. Bandyopadhyay and G. Biswas |
Electric field mediated separation of water–ethanol mixtures in carbon nanotubes integrated in nanoporous graphene membranes |
Faraday Discuss |
776 |
2018 |
A Kumar, S Panda, A Kumar, V Narsaria |
Performance of a graphite wafer-reinforced viscoelastic composite layer for active-passive damping of plate vibration |
Compoiste Structures |
777 |
2018 |
Vigneshwaran K, Gurpreet Singh Sodhi, Muthukumar P, Arvind VK, Balamurugan G, Sriram S, Senthilmurugan S |
Experimental investigation of a Cast-Steel based Thermal Energy Storage System, Energy Procedia |
Energy Procedia |
778 |
2018 |
J.Sunku Prasad, P.Muthukumar, R.Anandalakshmi, HakeemNiyas |
Comparative study of phase change phenomenon in high temperature cascade latent heat energy storage system using conduction and conduction-convection models |
Solar Energy |
779 |
2018 |
Parag K. Talukdar, A. Sardar, Vinayak Kulkarni, Ujjwal K. Saha |
Parametric analysis of model Savonius hydrokinetic turbines through experimental and computational investigations |
Energy Conversion and Management |
780 |
2018 |
Ranjan Das, Sukanta Roy and Ujjwal K. Saha |
An inverse method for optimization of geometric parameters of a Savonius-style wind turbine |
Energy Conversion and Management |
781 |
2018 |
Nur Alom and Ujjwal K. Saha |
Performance evaluation of vent-augmented elliptical-bladed Savonius rotors by numerical simulation and wind tunnel experiments |
Energy |
782 |
2018 |
Achinta Sarkar and Ujjwal K. Saha |
Impact of intake charge preheating on a biogas run dual fuel diesel engine using ternary blends of diesel-biodiesel-ethanol |
ASCE Journal of Energy Engineering |
783 |
2018 |
R. Shufen and U.S. Dixit |
An analysis of thermal autofrettage process with heat treatment |
International Journal of Mechanical Sciences |
784 |
2018 |
N. Alom and U. K. Saha |
An insight into the drag and lift characteristics of modified Bach and Benesh profiles of Savonius wind rotor |
Energy Prodedia |
785 |
2018 |
K. K. Gajrani, M. Ravi Sankar, U. S. Dixit |
Tribological performance of MoS2-filled microtextured cutting tools during dry sliding test |
ASME Journal of Tribology |
786 |
2018 |
Rajkumar Sarma, Pranab K. Mondal |
Entropy Generation Minimization in a Pressure-Driven Microflow of Viscoelastic Fluid With Slippage at the Wall: Effect of Conjugate Heat Transfer |
ASME Journal of Heat Transfer |
787 |
2018 |
Achinta Sarkar and Ujjwal K. Saha |
Effect of intake charge preheating and equivalence ratio in a dual fuel diesel engine run on biogas and ethanol-blended diesel |
ASME Journal of Energy Resources Technology |
788 |
2018 |
Nur Alom and Ujjwal K. Saha |
Four decades of research into the augmentation techniques of Savonius wind turbine rotor |
ASME Journal of Energy Resources Technology |
789 |
2018 |
G.C. Verma, P. M. Pandey and U.S. Dixit |
Estimation of workpiece-temperature during ultrasonic-vibration assisted milling considering acoustic softening |
International Journal of Mechanical Sciences |
790 |
2018 |
Pandey, V., Biswas, G., Dalal, A., and Welch, S.W.J. |
Bubble Lifecycle During Heterogeneous Nucleate Boiling |
ASME Journal of Heat Transfer |
791 |
2018 |
P. Gangsar, R. Tiwari |
Multi-fault Diagnosis of Induction Motor at Intermediate Operating Conditions using Wavelet Packet Transform and Support Vector Machine |
ASME, Journal of Dynamic Systems, Measurement and Control |
792 |
2018 |
R. Shufen and U.S. Dixit |
A review of theoretical and experimental research on various autofrettage processes |
ASME Journal of Pressure Vessel Technology |
793 |
2018 |
G.C. Verma, P. M. Pandey and U.S. Dixit |
Modeling of static machining force in axial ultrasonic-vibration assisted milling considering acoustic softening |
International Journal of Mechanical Sciences |
794 |
2018 |
Borgohain, P., Arumughan, J., Dalal, A., and Natarajan, G. |
Design and Performance of a Three-dimensional Micromixer with Curved Ribs |
Chemical Engineering Research and Design |
795 |
2018 |
P. Gangsar and R. Tiwari |
A Support Vector Machine based Fault Diagnostics of Induction Motors for Practical Situation of Multi-Sensor Limited Data Case Measurement |
Measurement |
796 |
2018 |
Parmananda, M., Thirumalaisamy, R., Dalal, A., and Natarajan, G. |
Investigations of Turbulence-radiation Interaction in Non-Oberbeck-Boussinesq Buoyancy-driven Flows |
International Journal of Thermal Sciences |
797 |
2018 |
Anwesa Barman, Manas Das |
Simulation and experimental investigation of finishing forces in magnetic field assisted finishing process |
Journal of Materials and Manufacturing Processes |
798 |
2018 |
Lav Kumar Kaushik, P Muthukumar |
Life cycle Assessment (LCA) and Techno-economic Assessment (TEA) of medium scale (5–10 kW) LPG cooking stove with two-layer porous radiant burner |
Applied Thermal Engineering |
799 |
2018 |
A. Iqbal, M. Pandey |
A simple methodology to incorporateflashing and variation of thermophysical properties for flow boilingpressure drop in a microchannel |
International Journal of Thermal Sciences |
800 |
2018 |
B Kiran Naik, P Muthukumar, P Sunil Kumar |
A novel finite difference model coupled with recursive algorithm for analyzing heat and mass transfer processes in a cross flow dehumidifier/regenerator |
International Journal of Thermal Sciences |
801 |
2018 |
A. Panda, J. S. Rapur and R. Tiwari |
Prediction of Flow Blockages and Impending Cavitation in Centrifugal Pumps using Support Vector Machine (SVM) Algorithms Based on Vibration Measurements |
Measurement |
802 |
2018 |
Subham, Saikia, A., Dalal, A., and Pati, S. |
Thermo-hydraulic Transport Characteristics of Non-Newtonian Fluid Flows Through Corrugated Channels |
International Journal of Thermal Sciences |
803 |
2018 |
Chilaka Ravi Chandra Rao, Hakeem Niyas, Muthukumar P |
Performance Tests on Lab–scale Sensible Heat Storage Prototypes. |
Applied Thermal Engineering |
804 |
2018 |
Mishra NK, Muthukumar P |
Development and Testing of Energy Efficient and Environment Friendly Porous Radiant Burner Operating on Liquefied Petroleum Gas. |
Applied Thermal Engineering |
805 |
2018 |
Parag K. Talukdar, Vinayak Kulkarni, Ujjwal K. Saha |
Field-testing of model helical-bladed hydrokinetic turbines for small-scale power generation |
Renewable Energy |
806 |
2018 |
Borgohain, P., Choudhary, D., Dalal, A., and Natarajan, G. |
Numerical Investigation of Mixing Enhancement for Multi-species Flows in Wavy Channels |
Chemical Engineering & Processing: Process Intensification |
807 |
2018 |
P. K. Talukdar, V. Kulkarni and U. K. Saha |
Field testing of model helical-bladed hydrokinetic turbine for small-scale power generation |
Renewable Energy |
808 |
2018 |
Parmananda, M., Dalal, A., and Natarajan, G. |
Unified Framework for Buoyancy Induced Radiative-convective Flow and Heat Transfer on Hybrid Unstructured Meshes |
International Journal of Heat and Mass Transfer |
809 |
2018 |
R. Sarma, A. Nath, T. Konwar, P. K. Mondal, S. Wongwises |
Thermo-hydrodynamics of a viscoelastic fluid under asymmetrical heating |
International Journal of Heat and Mass Transfer |
810 |
2018 |
Bhadauriya, S., Kapadia, H., Dalal, A., and Sarkar, S. |
Effect of channel confinement on wake dynamics and forced convective heat transfer past a blunt headed cylinder |
International Journal of Thermal Sciences |
811 |
2018 |
Randive, P., Dalal, A., and Mukherjee, P. P. |
Mesoscopic Modeling of Capillarity-induced Two-phase Transport in a Microfluidic Porous Structure |
Transport in Porous Media |
812 |
2018 |
Sandeep Singh, R. Tiwari |
Model Based Identification of Crack and Bearing Dynamic Parameters In Flexible Rotor Systems Supported with an Auxillary Active Magnetic Bearing |
Mechanisn and Machine Theory |
813 |
2018 |
Parmananda, M., Dalal, A., and Natarajan, G. |
The Influence of Partitions on Predicting Heat Transfer due to the Combined Effects of Convection and Thermal Radiation in Cubical Enclosures |
International Journal of Heat and Mass Transfer |
814 |
2018 |
D. G. Gunjo, P. Mahanta and P. S. Robi |
Melting enhancement of a latent heat storage with dispersed Cu, CuO and Al2O3 nanoparticles for solar thermal applications |
Renewable Energy. 121C (2018)pp: 652-665. |
815 |
2018 |
G Bolar, A Das, SN Joshi |
Measurement and analysis of cutting force and product surface quality during end-milling of thin-wall components |
Measurement |
816 |
2018 |
Deb, S., Tammi, K., Kalita, K. and Mahanta, P., |
Impact of Electric Vehicle Charging Station Load on Distribution Network. |
Renewable Energy |
817 |
2018 |
Lakshmia DVN, Muthukumar P, Apurba Layek, Nayak PK Energy Storage.Renewable Energy 120 (2018) 23-34. |
Drying Kinetics and Quality Analysis of Black Turmeric (Curcuma Caesia) Drying in a Mixed Mode Forced Convection Solar Dryer Integrated with Thermal Energy storage |
Renewable Energy |
818 |
2018 |
D. Shankar, M. Pandey, D.N. Basu |
Parametric effects on coupled neutronic-thermohydraulic stability characteristics of supercritical water cooled reactor |
Annals of Nuclear Energy |
819 |
2018 |
Singh S. S., Baruah P. K., Khare A. and Joshi S. N. |
Incubation studies and the threshold for surface damage and cavity formation in the processing of polycarbonate by Nd:YAG laser |
Optics and Laser Technology |
820 |
2018 |
V. Kumar and U.S. Dixit |
A model for the estimation of hardness of laser bent strips |
Optics and Laser Technology |
821 |
2018 |
Manik, J., Dalal, A., and Natarajan, G. |
A Generic Algorithm for Three-dimensional Multi-phase Flows on Unstructured Meshes |
International Journal of Multiphase Flow |
822 |
2018 |
A. Iqbal, M. Pandey |
Effect of local thermophysical propertiesand flashing on ow boiling pressure drop in microchannels |
International Journal of Multiphase Flow |
823 |
2018 |
R. S. Srinivas, R. Tiwari and Ch. K. Babu |
Application of Active Magnetic Bearings in Flexible Rotordynamic Systems - A State-of-the-Art Review |
Mechanical Systems and Signal Processing |
824 |
2018 |
Chandan Kumar, Manas Das, C.P. Paul, K.S. Bindra |
Comparison of bead shape, microstructure and mechanical properties of fiber laser beam welding of 2 mm thick plates of Ti-6Al-4V alloy |
Optics and Laser Technology |
825 |
2018 |
J. Ravi, S. Nidhan, N. Muthu, S.K. Maiti |
Analytical and Experimental studies on detection of longitudinal, L and T shaped cracks in Isotropic and Bi-material beams based on changes in natural frequency |
Mechanical Systems and Signal Processing |
826 |
2018 |
B. N.Fetene, Vikash Kumar, Uday S.Dixit, Raghu Echempati |
Numerical and experimental study on multi-pass laser bending of AH36 steel strip |
Optics & Laser Technology |
827 |
2018 |
N. Sahoo, V. Kulkarni and R. K. Peetala |
Conjugate heat transfer study in hypersonic flows |
Journal of the Institution of Engineers (India): Series C |
828 |
2018 |
SS Singh, PK Baruah, A Khare, SN Joshi |
Effect of laser beam conditioning on fabrication of clean micro-channel on stainless steel 316L using second harmonic of Q-switched Nd: YAG laser |
Optics and Laser Technology |
829 |
2018 |
Bipul Das, Sukhomay Pal, Swarup Bag |
Monitoring of friction stir welding process using main spindle motor current |
Journal of The Institution of Engineers (India): Series C |
830 |
2018 |
B.N. Fetene, V. Kumar, U.S. Dixit and R. Echempati |
Numerical and experimental study on multi-pass laser bending of AH36 steel strips |
Optics and Laser Technology |
831 |
2018 |
M. P. Borthakur, G. Biswas, and D. Bandyopadhyay |
Dynamics of deformation and pinch-off of a migrating compound droplet in a tube |
Physical Review E |
832 |
2018 |
Arnab Lahiri, Pranab K. Mondal |
Evaluation of temperature history of a spherical nanosystem irradiated with various short-pulse laser sources |
Physical Review E |
833 |
2018 |
Rajkumar Sarma, Pranab K. Mondal |
Marangoni instability in a thin film heated from below: Effect of nonmonotonic dependence of surface tension on temperature |
Physical Review E |
834 |
2018 |
Nath, B., Biswas, G., Dalal, A., and Sahu, K. C. |
Cross-stream Migration of Drops Suspended in Poiseuille Flow in the Presence of an Electric Field |
Physical Review E |
835 |
2018 |
Pranjol Paul, K.S.R.K. Murthy and D. Chakraborty |
A strain gage technique for mode I notch stress intensity factor of sharp V-notched configurations |
Theoretical and Applied Fracture Mechanics |
836 |
2018 |
Manish Kumar Dubey and Satyajit Panda |
Electromechanical properties and actuation capability of an extension mode piezoelectric fiber composite actuator with cylindrically periodic microstructure |
Archive of Applied Mechanics |
837 |
2018 |
Rasmi Ranjan Behera, A. Das, D. Pamu, L.M. Pandey, M. Ravi Sankar |
Mechano-tribological properties and in vitro bioactivity of biphasic calcuim phosphate coating on Ti-6Al-4V |
Journal of the Mechanical Behavior of Biomedical Materials |
838 |
2018 |
S. Brahmachary, G. Natarajan, V. Kulkarni and N. Sahoo |
A sharp‐interface immersed boundary framework for simulations of high‐speed inviscid compressible flows |
International Journal of Numerical Methods in Fluids |
839 |
2018 |
U Talukdar, SM Hazarika, JQ Gan |
A Kernel Partial least square based feature selection method |
Pattern Recognition |
840 |
2018 |
Pandey, V., Biswas, G., and Dalal, A. |
Effect of Surface Wettability and Electric Field on Transition of Film Boiling to Nucleate Boiling |
Numerical Heat Transfer, Part A |
841 |
2018 |
M. P. Borthakur, G. Biswas and D. Bandyopadhyay |
Dynamics of an arched liquid jet under the influence of gravity |
European Journal of Mechanics / B Fluids |
842 |
2018 |
Arnab Kr. De, V. Eswaran, P. K. Mishra |
Dynamics of plumes in turbulent Rayleigh-Benard convection |
European Journal of Mechanics - B/Fluids |
843 |
2018 |
Bhardwaj, S., and Dalal, A. |
Mesoscopic Analysis of Three-dimensional Droplet Displacement on Wetted Grooved Wall of a Rectangular Channel |
European Journal of Mechanics / B Fluids |
844 |
2018 |
S. Brahmachary, G. Natarajan and N. Sahoo |
On maximum ballistic coefficient axisymmetric geometries in hypersonic flows |
Journal of Spacecraft and Rockets |
845 |
2018 |
Kumar, G., Kalita, K., Tammi, K. |
Analysis of Bridge Currents and UMP of an Induction Machine With Bridge Configured Winding Using Coupled Field and Circuit Modeling |
IEEE Transactions on Magnetics |
846 |
2018 |
Anwesa Barman, Manas Das |
Nano-finishing of bio-titanium alloy to generate different surface morphologies by changing Magnetorheological polishing fluid compositions |
Precision Engineering |
847 |
2018 |
S Pushp, A Saikia, A Khan, SM Hazarika |
A cognitively enhanced collaborative control architecture for an intelligent wheelchair: Formalization, implementation and evaluation |
Cognitive Systems Research |
848 |
2018 |
Shobhanjana Kalita, Arindam Karmakar, Shyamanta M Hazarika |
Efficient extraction of spatial relations for extended objects vis-à-vis human activity recognition in video |
Applied Intelligence |
849 |
2018 |
Sangeeta Das, S.S. Gautam, C.R. Gautam, Abhishek Madheshiya and U.S. Dixit |
Parametric optimization of dry sliding wear and friction of germanium doped lead calcium titanate borosilicate glass ceramic |
Ceramics International |
850 |
2018 |
Arup Nandy, C. S. Jog |
A monolithic finite-element formulation for magnetohydrodynamics |
Sadhana: Indian Academy of Sciences |
851 |
2018 |
P Muthukumar, Alok Kumar, Nithin N Raju, K Malleswararao, Muhammad M Rahman |
A critical review on design aspects and developmental status of metal hydride based thermal machines |
International Journal of Hydrogen Energy |
852 |
2018 |
Ashish J. Chaudhari, Vinayak Kulkarni and Niranjan Sahoo |
State-of-the-art technology in variable compression ratio mechanism for spark ignition engine |
Sadhana |
853 |
2018 |
R. Kant and S N Joshi |
Numerical investigations into influence of scanning path curvature on deformation behavior during curvilinear laser bending of magnesium sheets |
Journal of Thermal Stresses |
854 |
2018 |
J. S. Rapur, R. Tiwari |
Automation of Multi-Fault Diagnosing of Centrifugal Pumps using Multi-Class Support Vector Machine with Vibration and Motor-Current Signals in Frequency Domain |
Journal of the Brazilian Society of Mechanical Sciences and Engineering (BMSE) |
855 |
2018 |
Chandan Kumar, Manas Das, C.P. Paul, K.S. Bindra |
Characteristics of fiber laser weldments of two phases (α+β) titanium alloy |
Journal of Manufacturing Processes |
856 |
2018 |
Chandan Kumar, Manas Das, C.P. Paul, K.S. Bindra |
Characteristics of ?ber laser weldments of two phases (?+?) titanium alloy |
Journal of Manufacturing Processes |
857 |
2018 |
Zayoud, A., Mahanta, P. and Saha, U.K., |
A Novel Method of Pure Oxy-fuel Circulating Fluidized Bed Combustion with Zero Recirculation Flue Gas–Experimental Validation. |
Energies |
858 |
2018 |
A. Mukherjee, P. K. Mondal |
Analysis of Heat Transfer Through Optically Participating Medium in a Concentric Spherical Enclosure: The Role of Dual-Phase-Lag Conduction and Radiation |
Journal of Thermal Science and Engineering Applications |
859 |
2018 |
P. K. Talukdar, V. Kulkarni and U. K. Saha |
Performance estimation of Savonius wind and Savonius hydrokinetic turbines under identical power input |
AIP Journal of Renewable and Sustainable Energy Reviews |
860 |
2018 |
R Bhattacharyya, SM Hazarika |
Object affordance driven inverse reinforcement learning through conceptual abstraction and advice |
Paladyn Journal of Behavioral Robotics |
861 |
2018 |
Nath, B., Raza, A., Sethi, V., Dalal, A., Ghosh, S., and Biswas, G. |
Understanding Flow Dynamics, Viability and Metastatic Potency of Cervical Cancer (HeLa) Cells Through Constricted Microchannels |
Scientific Reports |
862 |
2018 |
H. S. Gaikwad, P. K. Mondal, S.Wongwises |
Softness induced enhancement in net throughput of non linear bio fluids in nanofluidic channel under EDL phenomena |
Scientific Reports - Nature |
863 |
2018 |
Deb, S., Tammi, K., Kalita, K., & Mahanta, P. |
Review of recent trends in charging infrastructure planning for electric vehicles |
Wiley Interdisciplinary Reviews: Energy and Environment |
864 |
2018 |
S. Singh, D. Kumar, M. Ravi Sankar, K. Rajurkar |
Nanofinishing of Microslots on Surgical Stainless Steel by Abrasive Flow Finishing Process: Experimentation and Modeling |
ASME Journal of Micro-Nano Manufacturing |
865 |
2018 |
S. Agarwal and N. Sahoo |
An experimental investigation towards calibration of a shock tube and stagnation heat flux determination |
International Journal of Aerodynamics |
866 |
2018 |
Dipankar Bora, Manoj Kumar, Sachin Singh Gautam |
Ductile fracture at high velocity impact of cylindrical tubes |
Materials Today: Proceedings |
867 |
2018 |
N Devarani, SN Joshi |
Surface Alloying of Ti-6Al-4V on P20 Mold Steel using Electric Discharge Processing (EDP) |
Materials Today: Proceedings |
868 |
2018 |
G Bolar, M Mekonen, A Das, SN Joshi |
Experimental Investigation on Surface Quality and Dimensional Accuracy during Curvilinear Thin-Wall Machining |
Materials Today: Proceedings |
869 |
2018 |
P.P. Dutta, K. Kalita and U.S. Dixit |
Electromagnetic-force-assisted bending and striaghtening of AH36 steel strip by laser irradaition |
Lasers in Manufacturing and Materials Processing |
870 |
2018 |
A. Zayoud, P. Mahanta and U. K. Saha |
A Novel method of pure oxy-fuel circulating fluidized bed combustion with zero recirculation flue gas – Experimental validation |
Materials Today: Proceedings |
871 |
2018 |
Hotta, S.K., Sahoo, N., Mohanty, K. and Mahanta, P. |
Effect of Compression Ratio on the Performance of a Constant Speed Spark Ignition Engine Operating on Raw Biogas |
Journal of Energy and Environmental Sustainability |
872 |
2018 |
A. Singh, N. A. Manikandan, M. Ravi Sankar, K. Pakshirajan, L. Roy, |
Experimental Investigation and Surface Morphology of Bio-Micromachining on copper |
Materials Today: Proceedings |
873 |
2018 |
B. V. Ramanaiah, B. Manikanta, M. Ravi Sankar, M. Malhotra, K. K. Gajrani |
Experimental study of Deflection and Surface Roughness in Thin Wall Machining of Aluminum Alloy |
Materials Today: Proceedings |
874 |
2018 |
P.P. Dutta, K. Kalita, U.S. Dixit and H. Liao |
Magnetic-force-assisted straightening of bent mild steel strip by laser irradiation |
Lasers in Manufacturing and Materials Processing |
875 |
2018 |
Bhardwaj, S., and Dalal, A. |
Sweeping of the Entrapped Fluid out of the Groove in a Three-dimensional Channel Using Lattice Boltzmann Method |
European Journal of Mechanics, B/Fluids |
876 |
2018 |
Sathisha, H.M., Dalal, A. |
An Unsteady Model to Study the Effects of Porosity and Temperature in All-Vanadium Redox Flow Battery with Mass Transfer and Ion Diffusion |
Springer |
877 |
2018 |
A. Gogoi, K. Anki Reddy, P. K. Mondal |
Multilayer Graphene Oxide Membrane in Forward Osmosis: Molecular Insights |
ACS Applied Nano Materials |
878 |
2018 |
U.S. Dixit, V. Yadav, R.G. Naryanan and N. Bhardwaj |
Friction in micromanufacturing: a review |
Journal of Micromanufacturing |
879 |
2018 |
Maharana M., Nayak S. K. and Sahoo N |
Nonedible vegetable oil based dielectric liquid and use thereof in power and distribution transformer |
|
880 |
2017 |
Bordeori M. M., Maharana M., Baruah N., Nayak S. K. and Sahoo N |
Design and development of an automated open beaker oxidative ageing assessment apparatus |
|
881 |
2017 |
Maharana M., Nanda A., Nayak S. K. and Sahoo N |
Natural and force convection imposed accelerated thermal ageing simulator to predict the life of the insulating oil before using in transformer |
|
882 |
2017 |
S. Bag and M. R. Amin |
Simulation based study on ultra-short pulse laser welding of dissimilar materials expending phase lag influence |
IMECE 17, November 3 - 9, 2017, Tampa, Florida, USA. |
883 |
2017 |
S. Bag |
Microscale heat transfer in fusion welding of glass by ultra-short pulse laser using dual phase lag effects |
International Conference on Recent Advances in Materials & Manufacturing Technologies (IMMT 2017), 28th - 29th November, 2017, Dubai. |
884 |
2017 |
B. Das, S. Pal and S. Bag |
Weld defect identification in friction stir welding using power spectral density |
International Conference on Recent Advances in Materials & Manufacturing Technologies (IMMT 2017), 28th - 29th November, 2017, Dubai. |
885 |
2017 |
S. Bag: |
Feasibility of dissimilar microwelding using femtosecond pulse laser |
5th International Congress of the International Institute of Welding, 7th - 9th December, 2017, Chennai, India. |
886 |
2017 |
A. Sahu and S. Bag |
Micro-plasma Arc welding of Inconel718 thin Sheets, |
5th International Congress of the International Institute of Welding, 7th - 9th December, 2017, Chennai, India. |
887 |
2017 |
S. Bag, D. K. Yaduwanshi and S. Pal |
Role of physical variables in dynamic recrystallization during friction stir welding of aluminium alloy |
Advances in Materials & Processing Technologies, 11th - 14th December, 2017, Chennai, India. |
888 |
2017 |
B. Kumar, M. Baruah and S. Bag |
On the effect of heat input in cooling rate and microstructure of laser welded Ti-6Al-4V alloy |
Advances in Materials & Processing Technologies, 11th - 14th December, 2017, Chennai, India. |
889 |
2017 |
Avinish Tiwar, Piyush Singh, Pankaj Biswas and Sachin D. Kore |
Effect of traverse speed on FSW of AISI 1006 low carbon steel |
10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 2017), 7-9 December 2017, IIT Madras. |
890 |
2017 |
Jena, S. R., Dalal. A., and Natarajan .G. |
Development of Turbulent Axisymmetric Solver Over a Hybrid Unstructured Grid |
44th National Conference on Fluid Mechanics and Fluid Power, Amrita University, Kollam, India |
891 |
2017 |
Pandey.V., Biswas.G., and Dalal.A. |
Dependence of Growth Rate, Pinch-off Velocity and Size of a Single Bubble During Film Boiling on Superheat and Gravity-level |
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference, BITS-Pilani, Hyderabad, India. |
892 |
2017 |
Thirumalaisamy, R., Parmananda. M., Dalal. A. and Natarajan. G., |
Development of a Low Mach Number Solver to Study Combined Turbulent Convective-Radiative Heat Transfer |
6th Asian Symposium on Computation Heat Transfer and Fluid Flow, IIT Madras, India. |
893 |
2017 |
Nath, B., Borthakur, M. P., Biswas, G. and Dalal. A., |
Deformation of a Droplet in Constricted Microfluidic Channels at Low Reynolds number |
6th Asian Symposium on Computation Heat Transfer and Fluid Flow, IIT Madras, India. |
894 |
2017 |
Nath.B., Borthakur, M. P., Biswas, G. and Dalal, A. |
Dynamics of Droplet Deformation in Microchannels with Symmetric and Asymmetric Constrictions |
Proceedings of the ASME 2017 International Mechanical Engineering Congress & Exposition, Tampa, Florida, |
895 |
2017 |
Manik. J., Parmananda.M., Kotoky.S., Borgohain.P., Dalal. A., and Natarajan .G., |
Lessons from Anupravaha: Towards a General Purpose Computational Framework on Hybrid Unstructured Meshes for Multi-Physics Applications |
ICHMT International Symposium on Advances in Computational Heat Transfer, Napoli, Italy. |
896 |
2017 |
Pushp S., Bhardwaj B., Hazarika S.M. |
Cognitive Decision Making for Navigation Assistance Based on Intent Recognition |
In: Ghosh A., Pal R., Prasath R. (eds) Mining Intelligence and Knowledge Exploration. MIKE 2017. Lecture Notes in Computer Science, vol 10682. Springer, Hyderabad, India |
897 |
2017 |
A. Singh, P. Kumari |
Accurate stress solution for laminated rectangular plates bonded with functionally graded adhesive interlayer and subjected to transverse loading |
INCAM – 2017, 5-7 July 2017, MNNIT Allahabad, India |
898 |
2017 |
S Behera, P Kumari |
Free vibration analysis of piezoelectric plate using Mixed-field Extended Kantorovich Method |
INCAM – 2017, 5-7 July 2017, MNNIT Allahabad, India |
899 |
2017 |
A. Singh, R. Hazarika, P. Kumari |
Three-dimensional analytical solution of FGM panel with varying material properties along in-plane directions using Extended Kantorovich Method |
ICCE-25, 16-22 July, 2017, Rome, Italy |
900 |
2017 |
P. Kumari |
Three dimensional solutions for smart composite/sandwich plates subjected to Levy-type support conditions using extended Kantorovich method |
3rd Euro Congress on Iron, Steel and Construction Engineering , November 16-17, 2017 London, United Kingdom |
901 |
2017 |
S. Kar and P. Kumari |
A review on three-dimensional solution approaches for bending and dynamic analysis of piezolaminated cylindrical shell structures |
13th International Conference on Vibration Problems (ICOVP-2017) 29th November - 2nd December, 2017 |
902 |
2017 |
S. Behera and P. Kumari |
Effect of adhesive thickness on the free vibration of arbitrary supported smart plates |
13th International Conference on Vibration Problems (ICOVP-2017) 29th November - 2nd December, 2017 |
903 |
2017 |
B. Prabhakar, P. Kumari, S. Agyapal and K. Shranish , |
Experimental study of piezoelectric beam under free and forced vibration response for energy harvestin application |
13th International Conference on Vibration Problems (ICOVP-2017) 29th November - 2nd December, 2017 |
904 |
2017 |
A. Singh, P. Kumari |
Analytical solution of functionally graded beam having longitudinal stiffness variation. |
International Conference on Composite Materials and Structures, 27-29th December 2017, Hyderabad, India |
905 |
2017 |
P. Kumari. S. Kar |
Three dimensional elasticity solution for a simply supported cylindrical composite panel using the extended Kantorovich method. |
International Conference on Composite Materials and Structures, 27-29th December 2017, Hyderabad, India |
906 |
2017 |
Jasinta PE, Lakshmi DVN, Yashwant K, Muthukumar. P |
Drying characteristic of mixed mode type solar dryer using forced convection and thermal storage for ginger |
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer conference (ihmtc-2017), BITS Pilani, Hyderabad, December 27-30, 2017 |
907 |
2017 |
Lakshmi DVN, Muthukumar P, Apurba Layek, Abhimanyu KS, Sushoban D |
Performance analysis of double pass counter flow solar air heater for drying application |
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer conference (ihmtc-2017), BITS Pilani, Hyderabad, December 27-30, 2017 |
908 |
2017 |
Kaushik L K, Deb S, Muthukumar P |
Assessment of energy saving potential in self aspirated LPG stove with porous radiant burner |
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer conference (ihmtc-2017), BITS Pilani, Hyderabad, December 27-30, 2017. |
909 |
2017 |
Niyas H, Muthukumar P |
Appropriate sizing prediction and performance evaluation of the shell-and-tube latent heat storage uni |
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer conference (ihmtc-2017), BITS Pilani, Hyderabad, December 27-30, 2017 |
910 |
2017 |
Lakshmi DVN, Apurba Layek, Muthukumar, P |
Performance analysis of a mixed mode forced convection solar dryer with and without thermal energy storage heat exchanger |
Presented at International Conference on Mechanical Materials and Renewable Energy, Sikkim Manipal Institute of Technology, Sikkim,8-10th Dec 2017 |
911 |
2017 |
Kaushik L K, Deb S, Muthukumar P. |
Energy Saving and Techno-economic Assessment of Self Aspirated Domestic LPG Stove with Porous Radiant Burner |
Presented at International Conference on Mechanical Materials and Renewable Energy, Sikkim Manipal Institute of Technology, Sikkim,8-10th Dec 2017 |
912 |
2017 |
U K Tarai, P S Robi and Sukhomay Pal |
Development of a Novel Ni-Fe-Cr-B-Si Interlayer Material for Transient Liquid Phase Bonding of Inconel 718 |
International Conference on Recent Advances in Materials & Manufacturing Technologies (IMMT 2017), BITS Pilani Dubai Campus, Dubai, UAE, November 28-29, 2017 |
913 |
2017 |
A. Singh, N. A. Manikandan, M. Ravi Sankar, K. Pakshirajan, L. Roy |
Experimental Investigation and Surface Morphology of Bio-Micromachining on Copper |
7th International Conference of Materials Processing and Characterization (ICMPC), 17-19 March, 2017, GRIET Hyderabad, India, 2017. |
914 |
2017 |
B.V. Ramanaiah, B. Manikanta, M. Ravi Sankar, M.Malhotra, K. Kumar Gajrani |
Experimental Study of Deflection and Surface Roughness in Thin Wall Machining of Aluminum Alloy |
7th International Conference of Materials Processing and Characterization (ICMPC), 17-19 March, 2017, GRIET Hyderabad, India, 2017. |
915 |
2017 |
K. Kumar Gajrani, P. S. Suvin, S.Vasu Kailash, M. Ravi Sankar |
Comparative studies on thermal, rheological behavior of eco-friendly cutting fluids and their machining performance |
6th International and 27th All India Manufacturing Technology Design and Research (AIMTDR) Conference, 16-18 December, 2016, COEP Pune |
916 |
2017 |
K. Kumar Gajrani, S. Kumar Mallick,M. Ravi Sankar |
Comparative Studies on Mineral Oil, Eco Friendly Bio-Cutting Fluids Treatment and their Machining Performance |
,National Conference on Sustainable Mechanical Engineering: Today and Beyond (SMETB), March 25-26, 2017, Tezpur University, India.(Best Paper Award) |
917 |
2017 |
M. Ravi Sankar, K. Kumar Gajrani |
Cutting Fluid Emissions and Eco-Friendly Cutting Fluid for Sustainable Machining |
Proceedings of the National Conference on Sustainable Mechanical Engineering: Today and Beyond (SMETB), March 25-26, 2017, Tezpur University, Assam, India. |
918 |
2017 |
A. Singh, N. A. Manikandan, M. Ravi Sankar, K. Pakshirajan, L. Roy |
Development of Nozzle Feature on Copper Surface by Bio-Micromachining |
International Conference on Manufacturing Technology and Simulation (ICMTS), 7-8 July, 2017, IIT Madras, India, 2017. (Best Paper Award) |
919 |
2017 |
S. Singh, M. Ravi Sankar, P. Ranjan, R. Balasubramaniam |
Development and rheological study of the polymer blended viscoelastic medium for finishing of microholes |
2nd International conference on Advanced Materials Research and Manufacturing Technologies (AMRMT-2017), Aug 02-05, 2017, Phuket, Thailand (Best Presenter Award to M. Ravi Sankar) |
920 |
2017 |
M. Ravi Sankar |
Nanofinishing of Bio-Implants using Polymer Rheological Abrasive Complex Suspensions |
6th Asian Biomaterials Congress (ABMC-2017), October 25-27, 2017. Thiruvananthapuram, India |
921 |
2017 |
M. Ravi Sankar, V.K. Jain, K.P. Rajurkar |
Rheological and Nano-finishing Studies of Elastically Dominant Multiple Polymers Blend Based Abrasive Flow Finishing Medium |
International Conference on Advances in Polymer Science and Technology (APA-2017), 23-25 November, 2017, New Delhi, India. |
922 |
2017 |
J. Das, P.S. Robi, M. Ravi Sankar |
International Creep Behavior of Nugget Zone of Friction Stir Welded 2014 Aluminum Alloy |
International conference on Recent Advances in Materials & Manufacturing Technologies, Nov 28-29, 2017, Dubai, UAE. |
923 |
2017 |
Nada Barakat and Deepak Sharma, |
Multi-Objective Optimization Framework and its Experimental Validation for Bulldozer in Soil Cutting |
In Proceedings of the Indian Geotechnical Conference 2017 GeoNEst, 14-16 December 2017, IIT Guwahati, India |
924 |
2017 |
S. Kirtania and D. Chakraborty |
Representative Volume Element Based Finite Element Modeling of Carbon Nanotube (CNT)-Reinforced Composites with a Broken CNT, |
Proceedings of the National Conference on Sustainable Mechanical Engineering: Today and Beyond(SMETB), March 25−26, 2017 at Tezpur University, India |
925 |
2017 |
S. Kirtania and D. Chakraborty, |
Determination of Thermoelastic Properties of Carbon Nanotube/Epoxy Composites using Finite Element Method, |
Proceedings of International Conference on Emerging Trends in Nanoscience and Nanotechnology (ICETINN-2017), March 2017, SMIT, Sikkim |
926 |
2017 |
R. Kumar, M. Pandey |
Numerical simulation of slug-plug flow in narrow channels of heat pipe, |
In: Proc. 44th National Conference on Fluid Mechanics and Fluid Power (FMFP-2017), Kollam, Kerala, India, 2017 (to appear). |
927 |
2017 |
A. Kamath, S.K. Sarma, A. Iqbal, M. Pandey |
Numerical simulation of fluid flow and heat transfer in miniature channels incorporating the effect of local properties |
In: Proc. 44th National Conference on Fluid Mechanics and Fluid Power (FMFP-2017), Kollam, Kerala, India, 2017 (to appear). |
928 |
2017 |
V. Satheeshkumar, R. Ganesh Narayanan |
Assessment of Formability of Adhesive Bonded Steel Sheets by Geometrical Heterogeneities |
lnternational conference on Advances in Materials and Manufacturing (lCAMM 2017), NIFFT Ranchi, India, January 19-21, 2017 |
929 |
2017 |
A.Johnney Mertens and S. Senthilvelan |
Adhesive Wear Performance of PP/MWCNT Composites |
International Conference on Advances in Manufacturing and Materials Engineering AMEE2014 NIT Suratkal March 27th-29th, 2014 Also Published in Procedia Materials Science Volume 5, 2014 |
930 |
2017 |
Aditya Kumar, Atman Patel and S. K. Dwivedy |
Development of a NAO humanoid based medical assistant |
Proceedings of ACM Advances in Robotics conference, Indian Institute of Technology, Delhi, Delhi India, June 2017 (AIR’17), 6 pages. DOI: 10.1145/3132446.3134899 |
931 |
2017 |
Upasana Talukdar and Shyamanta M Hazarika |
Designing spatio-temporal filter using adaptive sliding window for single trial EEG based BCI |
Proceedings of Advances in Robotics (AIR 2017) - 3r d International Conference of the Robotics Society of India. June 27-July 2, 2017, IIT Delhi, ACM - ICPS. |
932 |
2017 |
V. Agrawal, S. S. Gautam |
NURBS-enriched Contact Isogeometric Element for Adhesive Contact Problems |
Seventh International Conference on Theoretical, Aapplied, Computational and Experimental Mechanics, IIT Kharagpur, 28-30 December 2017 (Accepted) |
933 |
2017 |
S. S. Gautam, Kiran U |
GPU-based Simulation of Nonlinear Finite Element Problems |
Seventh International Conference on Theoretical, Aapplied, Computational and Experimental Mechanics, IIT Kharagpur, 28-30 December 2017 (Accepted) |
934 |
2017 |
V. Agrawal, S. S. Gautam |
Enrichment of Finite Elements with Higher Order Hermite Polynomials for Adhesive Contact Problems |
Indian Conference on Applied Mechanics (INCAM) 2017, MNNIT Allahabad, 5– 7 July 2017 (Accepted) |
935 |
2017 |
S. R. Ashirgade, A. Jhalani, S. S. Gautam |
Comparison of Explicit Time Integration Schemes for Dynamic Problems |
Indian Conference on Applied Mechanics (INCAM) 2017, MNNIT Allahabad, 5– 7 July 2017 (Accepted) |
936 |
2017 |
Kiran U., and Gautam S. S. |
A GPU-based simulation of nonlinear finite element problems |
International Conference on Theoretical, Applied, Computational and Experimental Mechanics, IIT Kharagpur, Kharagpur, India, December 28th - 30th, 2017. |
937 |
2017 |
Talukdar PK, Kulkarni V, Das AK, Dwivedy SK, Kakoty.SK, Mahanta P, and Saha UK |
In-situ experiments to estimate the performance characteristics of a double-step helical-bladed hydrokinetic turbine |
Paper No. GTIndia2017-4572, ASME 2017 Gas Turbine India Conference, December 7–8, Bangalore, India. |
938 |
2017 |
Roy S, Das R and Saha UK |
Identification of geographical locations to operate Savonius wind turbine rotor for meeting a desired performance |
Paper No. GTIndia2017-4566, ASME 2017 Gas Turbine India Conference, December 7–8, Bangalore, India. |
939 |
2017 |
Talukdar PK, Kulkarni V, Dehingia D, and Saha UK |
Evaluation of a model helical bladed hydrokinetic turbine characteristics from in-situ experiments |
ASME 2017 11th International Conference on Energy Sustainability, Paper No. ES2017-3490, June 26–30, Charlotte, North Carolina, USA. |
940 |
2017 |
Alom N, and Saha UK |
Arriving at the optimum overlap ratio for an elliptical-bladed Savonius rotor |
Paper No. GT2017-64137, ASME 2017 Turbo Expo, June 26–30, Charlotte, North Carolina, USA. |
941 |
2017 |
B.N. Fetene, U.S. Dixit and H. Liao |
Laser bending friction stir processed and cement coated sheets |
Materials and Manufacturing Processes |
942 |
2017 |
Kiran Kumar LG, Muthukumar P, Sudhkar S |
Thermal comfort analysis of hostels in National Institute of Technology Calicut, India |
Sadhana |
943 |
2017 |
H. Chattopadhyay, S. K. Samanta, G. Biswas and B. B. Sharma |
Direct numerical simulation of evaporation in a biporous media |
Journal of Mechanical Science and Technology |
944 |
2017 |
Pandey, V., Biswas, G., and Dalal, A. |
Saturated Film Boiling at Various Gravity Levels Under the Influence of Electrohydrodynamic Forces |
Physics of Fluids |
945 |
2017 |
Deka, H., Ray, B., Biswas, G., Dalal, A., Tsai, P-H, and Wang, A-B. |
The Regime of Large Bubble Entrapment During a Single Drop Impact on a Liquid Pool |
Physics of Fluids |
946 |
2017 |
Bipul Das, Sukhomay Pal and Swarup Bag |
Torque based defect detection and weld quality modelling in friction stir welding process |
Journal of Manufacturing Processes |
947 |
2017 |
Arun K Kadian |
Effect of tool pin profile on the material flow characteristics of AA6061 |
Journal of Manufacturing Processes |
948 |
2017 |
Ashish Kumar Rajak, Sachin D Kore |
Experimental investigation of aluminium–copper wire crimping with electromagnetic process: Its advantages over conventional process |
Journal of Manufacturing Processes |
949 |
2017 |
P. Kaushik, P. K. Mondal, S. Chakraborty |
Rotational electrohydrodynamics of a non‑Newtonian fluid under electrical double‑layer phenomenon: the role of lateral confinement |
Microfluidics and Nanofluidics |
950 |
2017 |
R. Sarma, H. Gaikwad, P. K. Mondal |
Effect of Conjugate Heat Transfer on Entropy Generation in Slip Driven Microflow of Power-Law fluids |
Nanoscale and Microscale Thermophysical Engineering |
951 |
2017 |
Nizar Faisal Alkayem, Biswajit Parida and Sukhomay Pal |
Optimization of friction stir welding process parameters using soft computing techniques, Soft Computing |
Soft Computing |
952 |
2017 |
D. Sarkar, B. S. Reddy, S. Mandal, M. Ravi Sankar, B. Basu, |
Uniaxial Compaction-Based Manufacturing Strategy and 3D Microstructural Evaluation of Near-Net-Shaped ZrO2-Toughened Al2O3Acetabular Socket |
Advanced Engineering Materials |
953 |
2017 |
Bhardwaj, S., Randive, P. and Dalal, A. |
Lattice Boltzmann Simulations of Coalescence of Two Droplets on a Rectangular Channel Wall Considering Wetting Effects |
Progress in Computational Fluid Dynamics |
954 |
2017 |
Bhardwaj, S., Randive, P., and Dalal, A. |
Numerical Investigation of Two Dimensional Natural Convection and Entropy Generation inside a Porous Square Enclosure with Sinusoidally Heated Wall |
Progress in Computational Fluid Dynamics |
955 |
2017 |
M. Baruah, S. Bag and S Kumar |
Probing phase lag effect in ultra-short pulse laser heating of nano-film |
Manufacturing Letters |
956 |
2017 |
Alom N, Kumar N, and Saha UK |
Aerodynamic performance of an elliptical-bladed Savonius rotor under influence of number of blades and shaft |
Paper No. GTIndia2017-4554, ASME 2017 Gas Turbine India Conference, December 7–8, Bangalore, India. |
957 |
2017 |
B.N. Fetene, Rajkumar Shufen and U.S. Dixit, |
FEM based neural network modelling of laser assisted bending |
Neural Computing & Applications |
958 |
2017 |
W.G. Jiru, M. Ravi Sankar and U.S. Dixit |
Investigation of microstructure and microhardness in laser surface alloyed aluminum with TiO2 and SiC powders |
Materials Today: Proceedings |
959 |
2017 |
VK Jain, KK Saren, V Raghuram, MR Sankar |
Force analysis of magnetic abrasive nano-finishing of magnetic and non-magnetic materials |
International Journal of Advanced Manufacturing Technology |
960 |
2017 |
D. Yadav, L. Barbora, L. Rangan. P. Mahanta |
Tea waste and food waste as a potential feedstock for biogas production |
Environmental Progress and Sustainable Energy |
961 |
2017 |
Pranab K. Mondal, S. Wongwises |
Irreversibility analysis in a low Peclet-number electroosmotic transport through an asymmetrically heated microchannel |
International Journal of Exergy |
962 |
2017 |
P Kaushik, Pranab K. Mondal, Sukumar pati , Suman Chakraborty |
Heat transfer and entropy generation characteristics of a non-Newtonian fluid squeezed and extruded between two parallel plates |
ASME Journal of Heat Transfer |
963 |
2017 |
V. Satheeshkumar, R. Ganesh Narayanan |
Predicting the tensile behaviour of adhesively bonded sheets using equivalent geometrical heterogeneities |
International Journal of Material Forming |
964 |
2017 |
L. Ram and D. Sharma |
Evolutionary and GPU Computing for Topology Optimization of Structures |
Swarm and Evolutionary Computation |
965 |
2017 |
D. Gayen, D. Chakraborty and R. Tiwari |
Whirl Frequencies and Critical Speeds of a Rotor-Bearing System with a Cracked Functionally Graded Shaft - Finite Element Analysis |
European Journal of Mechanics - A/Solid |
966 |
2017 |
D Chakraborty, D. Chakraborty and K. S. R. K. Murthy |
A Strain Gage Technique for the Determination of Mixed Mode Stress Intensity Factors of Orthotropic Materials |
Composite Structures |
967 |
2017 |
M. Sharma, P. Mahanta and S.C. Mishra |
Usability of porous burner in kerosene pressure stove: an investigation through energy and exergy analyses |
Energy |
968 |
2017 |
S.C. Mishra, N. Gullipalli, A. Jain, A. Barurah, and A. Mukherjee |
Analysis of hyperbolic heat conduction in 1-D planar, cylindrical and spherical geometry using the lattice Boltzmann method |
International Communications in Heat and Mass Transfer |
969 |
2017 |
V.K. Mishra, S.C. Mishra and D.N. Basu |
Simultaneous estimation of parameters in analyzing porous medium combustion - Assessment of seven optimization tools |
Numerical Heat Transfer, Part A |
970 |
2017 |
V.K. Mishra, S.C. Mishra and D.N. Basu |
Simultaneous estimation of four parameters in a combined mode heat transfer in 2-D porous matrix with heat generation |
Numerical Heat Transfer, Part A |
971 |
2017 |
S.C. Mishra, S. Panigrahy and V.J. Ghatage |
Analysis of combined mode heat transfer in a porous medium using lattice Boltzmann method |
Numerical Heat Transfer, Part A |
972 |
2017 |
V. Yadav, A.K. Singh and U.S. Dixit |
Experimental validation of strategy for the inverse estimation of mechanical properties and coefficient of friction in flat rolling, Journal of Institution of Engineers, Series |
Journal of Institution of Engineers, Series (C) |
973 |
2017 |
B. Das, S. Bag and S. Pal |
Probing weld quality monitoring in friction stir welding through characterization of signals by fractal theory |
Journal of Mechanical Science and Technology |
974 |
2017 |
D. Yaduwanshi, S. Bag and S. Pal |
On the effect of tool offset in hybrid FSW of copper and aluminium alloy |
Materials and Manufacturing Processes |
975 |
2017 |
M. Baruah and S. Bag |
Microstructural influence on mechanical properties in plasma microwelding of Ti6Al4V alloy |
Journal of Materials Engineering and Performance |
976 |
2017 |
B. Das, S. Pal and S. Bag |
Weld quality prediction in friction stir welding using wavelet analysis |
International Journal of Advanced Manufacturing Technology |
977 |
2017 |
Mondal Arpan Kumar, Lohit Anche, Biswas Pankaj and Das Manas |
Prediction of weld induced distortion of large structure using equivalent load technique |
IMechE-Part-B |
978 |
2017 |
Mondal Arpan Kumar, Biswas Pankaj and Bag Swarup |
Prediction of weld induced residual stress and angular distortion of single sided and double sided fillet joint by SAW process |
International Journal of Steel Structure |
979 |
2017 |
Sujoy Tikader, Biswas Pankaj & Asit Puri |
A Study on Tooling and Its Effect on Heat Generation and Mechanical Properties of Welded Joints in Friction Stir Welding |
Journal of The Institution of Engineers (India): Series C |
980 |
2017 |
S. Karmakar, N. Kalita, A. Banerjee |
Optimum placement of shape memory alloy wire actuator |
Journal of Mechanical Engineering science |
981 |
2017 |
Bhardwaj, S., Randive, P. and Dalal, A. |
Lattice Boltzmann Simulations of Coalescence of Two Droplets on a Rectangular Channel Wall Considering Eetting Effects |
Progress in Computational Fluid Dynamics |
982 |
2017 |
Meshram, P., Bhardwaj, S., Dalal, A. and Pati, S. |
Effect of inclination angle on natural convection heat transfer and entropy generation in square porous enclosure |
Numerical Heat Transfer- Part A |
983 |
2017 |
N. Shanmuga Priya, Chandramohan Somayaji, and S. Kanagaraj |
Synthesis and characterization of Nd3+ doped Ce0.6Zr0.4O2 and its doping significance on oxygen storage capacity |
Rare Metals |
984 |
2017 |
Manish Kumar, N. Shanmuga Priya, S. Kanagaraj and G. Pugazhenthi. |
Melt rheological behavior of PMMA nanocomposites reinforced with modified nanoclay. |
Nanocomposites, DOI: 10.1080/20550324.2016.1221876, 2016 |
985 |
2017 |
Joshi, S. N. and G. Bolar |
Three-Dimensional Finite Element Based Numerical Simulation of Machining of Thin-Wall Components with Varying Wall Constraints. |
Journal of The Institution of Engineers (India), Series C |
986 |
2017 |
J.R. Pati, Dutta, S., Eliaers, P. Mahanta, Chatterjee, P.K., De Wilde, J. |
Experimental study of paddy drying in a vortex chamber |
Drying Technology |
987 |
2017 |
D.N. Basu, M.K.S. Sarkar |
Supercritical Natural Circulation Loop: A Technology for Future Reactors, Book: L. Chen, Y. Iwamoto (eds.) Advanced Applications of Supercritical Fluids in Energy Systems |
, IGI Global, Hershey PA, USA, |
988 |
2017 |
Ogier Maitre, Frederic Kruger, Deepak Sharma, Stephane Querry, Nicolas Lachiche and Pierre Collet |
Parallelizing Evolutionary Algorithms on GPGPU Cards with the EASEA Platform, Book: Programming multi-core and many-core computing systems, edited by Sabri Pllana, Fatos Xhafa, |
|
989 |
2017 |
Sachin Singh, M. Ravi Sankar, V.K. Jain, J. Ramkumar |
Abrasive flow finishing process and Modeling, Book: Nanofinishing Science and Technology: Basic and Advanced Finishing and Polishing Processes, Edited by V. K. Jain, |
CRC Press,, Taylor and Francis group |
990 |
2017 |
Debaleena Chakrabortry, D Chakraborty and KSRK Murthy |
Mode I SIF Determination of Orthotropic Laminates with Double-Ended Cracks Using a Single-Strain Gage, Book: Advances in Structural Integrity, |
Springer |
991 |
2017 |
Prakash Kumar Sahu and Sukhomay Pal |
Influence of Metallic Foil Alloying by FSW Process on Mechanical Properties and Metallurgical Characterization of AM20 Mg Alloy |
Materials Science and Engineering: A |
992 |
2017 |
H. Gaikwad, D.N. Basu, P.K. Mondal |
Slip Driven Micro-pumping of Binary System with A Layer of Non-conducting Fluid under Electrical Double Layer Phenomenon |
Colloids and Surfaces A: Physicochemical and Engineering Aspects |
993 |
2017 |
D. Shankar, D.N. Basu, M. Pandey |
Development and analysis of a novel scaling methodology for stability appraisal of supercritical flow channels |
Nuclear Engineering and Design |
994 |
2017 |
Arvind K Agrawal |
Joining of a tube to a sheet through end curling |
Journal of Materials Processing Technology |
995 |
2017 |
Prakash Kumar Sahu and Sukhomay Pal |
Mechanical Properties of Dissimilar Thickness Aluminium Alloy weld by Single/Double Pass FSW |
Journal of Materials Processing Technology |
996 |
2017 |
Kumar, Sunny and Sarma, Bhaskarjyoti and Dasmahapatra, Ahsok Kumar and Dalal, Amaresh and Basu, Dipankar Narayan and Bandyopadhyay, Dipankar |
Field induced anomalous spreading, oscillation, ejection, spinning, and breaking of oil droplets on a strongly slipping water surface |
Faraday Discuss. |
997 |
2017 |
Kumar, S., Sarma, B., Dalal, A., Basu, D., Dasmahapatra, A. K., and Bandyopadhyay, D. |
Field Induced Anomalous Spreading, Oscillation, Ejection, Spinning, and Breaking of Oil Droplets on Strongly Slipping Water Surface |
Faraday Discussions |
998 |
2017 |
Debaleena Chakraborty, D. Chakraborty and K. S. R. Krishna Murthy |
Experimental determination of mode I stress intensity factor in orthotropic materials using a single strain gage |
Engineering Fracture Mechanics |
999 |
2017 |
Poonam Kumari, A. Shakya |
Two-Dimensional Solution of Piezoelectric Plate Subjected to Arbitrary Boundary Conditions using Extended Kantorovich Method |
Procedia Engineering |
1000 |
2017 |
Ishwar Kapoor, R. Ganesh Narayanan, Scott Taylor, Vit Janik, Richard Dashwood |
Predicting the warm forming behavior of WE43 and AA5086 alloys |
Proceedia Engineering |
1001 |
2017 |
S. S. Gautam and P. M. Dixit |
Simulation of Large Deformation Elasto-plastic Impact Problems Using Two Different Objective Stress Measures |
Procedia Engineering |
1002 |
2017 |
Poonam Kumari, Agyapal Singh, R.K.N.D. Rajapakse, Santosh Kapuria |
Three-dimensional static analysis of Levy-type functionally graded plate with in-plane stiffness variation |
Composite Structures |
1003 |
2017 |
K. K. Gajrani, D. Ram, M. Ravi Sankar |
Biodegradation and hard machining performance comparison of eco-friendly cutting fluid and mineral oil using flood cooling and minimum quantity cutting fluid techniques |
Journal of Cleaner Production |
1004 |
2017 |
Hakeem Niyas,Chilaka RCR, Muthukumar P |
Performance Investigation of a lab–scale latent heat storage prototype - Experimental results, |
Solar Energy |
1005 |
2017 |
Rabha DK, Muthukumar P, Somayaji C |
Performance Studies on a Forced Convection Solar Dryer Integrated With a Paraffin Wax−Based Latent Heat Storage System. |
Solar Energy |
1006 |
2017 |
Bhardwaj, S., and Dalal, A. |
Mesoscopic Analysis of Dynamic Droplet Behavior on Wetted Flat and Grooved Surface for Low Viscosity Ratio |
ASME Journal of Heat Transfer |
1007 |
2017 |
Sachin Singh, Deepu Kumar, M. Ravi Sankar |
Experimental, Theoretical, and Simulation Comparative Study of Nano Surface Roughness Generated during Abrasive Flow Finishing (AFF) Process |
ASME Journal of Manufacturing Science and Engineering |
1008 |
2017 |
A. Kumar, S. Panda |
Optimal Damping in Circular Cylindrical Sandwich Shells With a Three-Layered Viscoelastic Composite Core |
ASME Journal of Vibration and Acoustics |
1009 |
2017 |
Hakeem Niyas, Sunku Prasad, P. Muthukumar |
Performance investigation of a lab-scale latent heat storage prototype - Numerical results, |
Energy Conversion and Management |
1010 |
2017 |
N. Muthu, S.K. Maiti, B.G. Falzon, Wenyi Yan |
Modelling Interacting Cracks using Level Set Method using the element-free Galerkin method |
International Journal of Mechanical Sciences |
1011 |
2017 |
Kiran Naik B, Muthukumar P |
A Novel Approach for Performance Assessment of Mechanical Draft Wet Cooling Towers, |
Applied Thermal Engineering |
1012 |
2017 |
H. Gaikwad, D.N. Basu, P.K. Mondal |
Non-linear Drag Induced Irreversibility Minimization in a Viscous Dissipative Flow Through a Micro-porous Channel |
Energy |
1013 |
2017 |
Poonam Kumari, S. Behera |
Three-dimensional free vibration analysis of levy-type laminated plates using multi-term extended Kantorovich method |
Composites Part B: Engineering |
1014 |
2017 |
Srivastava, H., Dalal, A., Sahu, K. C., and Biswas, G. |
Temporal Linear Stability Analysis of an Entry Flow in a Channel with Viscous Heating |
International Journal of Heat and Mass Transfer |
1015 |
2017 |
Kiran Naik B, Choudhary V, Muthukumar P, Somayaji, C |
Performance Assessment of a Counter Flow Cooling Tower – Unique Approach |
,Energy Procedia |
1016 |
2017 |
Kiran Naik B, Muthukumar P |
Empirical correlation based models for estimation of air cooled and water cooled condenser’s performance. |
Energy Procedia |
1017 |
2017 |
Lakshmia DVN, Apurba Layek, Muthukumar, P |
Performance Analysis of Trapezoidal Corrugated Solar Air Heater with Sensible Heat Storage Material. |
Energy Procedia |
1018 |
2017 |
Muthukumar, P and Lakshmia DVN |
Nucleation Enhancement Studies on Aqueous Salt Solutions. |
Energy Procedia |
1019 |
2017 |
Parmananda, M., Khan, S., Dalal, A., and Natarajan, G. |
Critical Assessment of Numerical Algorithms for Convective-Radiative Heat Transfer in Enclosures with Different Geometries |
International Journal of Heat and Mass Transfer |
1020 |
2017 |
H. Gaikwad, P. K. Mondal, S. Wongwises |
Non-linear drag induced entropy generation analysis in a microporous channel: The effect of conjugate heat transfer |
International Journal of Heat Mass Transfer |
1021 |
2017 |
M. Krishnani, D.N. Basu |
Computational Stability Appraisal of Rectangular Natural Circulation Loop: Effect of Loop Inclination |
Annals of Nuclear Energy |
1022 |
2017 |
Rabha DK, Muthukumar P, Somayaji C |
Energy and exergy analyses of the solar drying processes of Ghost Chilli Pepper and Ginger. |
Renewable Energy |
1023 |
2017 |
Rabha, DK, Muthukumar P |
Experimental Investigation of Thin Layer Drying Kinetics of Ghost Chill Pepper (Capsicum Chinense Jacq.) Dried in a Forced Convection Solar Tunnel Dryer. |
Renewable Energy |
1024 |
2017 |
P. Saha, G. Biswas, A.C. Mandal and S. Sarkar |
Investigation of coherent structures in a turbulent channel with built-in longitudinal vortex generators |
International Journal of Heat and Mass Transfer |
1025 |
2017 |
Bipul Das, Sukhomay Pal and Swarup Bag |
Design and Development of force and torque measurement setup for real time monitoring of friction stir welding process |
Measurement |
1026 |
2017 |
M. P. Borthakur, G. Biswas, and D. Bandyopadhyay |
Formation of liquid drops at an orifice and dynamics of pinch-off in liquid jets |
Physical Review E |
1027 |
2017 |
Srinivas R. Gorthi, P. K. Mondal, G. Biswas |
Magnetic-field-driven alteration in capillary filling dynamics in a narrow fluidic channel |
Physical Review E |
1028 |
2017 |
Nath, B., Biswas, G., Dalal, A., and Sahu, K. C. |
Migration of a Droplet in a Cylindrical Tube in the Creeping Flow Regime |
Physical Review E |
1029 |
2017 |
M. Baruah and S. Bag |
Influence of pulsation in thermo-mechanical analysis on laser microwelding of Ti6Al4V alloy |
Optics & Laser Technology |
1030 |
2017 |
Kapadia, H., Dalal, A., and Sarkar, S. |
Forced Convective Flow and Heat Transfer Past an Unconfined Blunt Headed Cylinder |
Numerical Heat Transfer Part A |
1031 |
2017 |
A. Mukherjee, S. C. Mishra, P. K. Mondal |
Numerical analysis of combined mode dual-phase-lag heat conduction and radiation in an absorbing, emitting and scattering cylindrical medium |
Numerical Heat Transfer: Part-A |
1032 |
2017 |
M. Baruah and S. Bag |
Characteristicdifference of thermo-mechanical behavior in plasma microwelding of steels |
Welding in the World |
1033 |
2017 |
Chandrahas Patel, Pravin Ghatule, Sachin D Kore |
Finite element analysis of effect of process parameters on electromagnetic free expansion of aluminium tube |
International Journal of Materials and Product Technology |
1034 |
2017 |
Arvind K Agrawal, R. Ganesh Narayanan, Satish V Kailas |
End forming behaviour of friction stir processed Al6063-T6 tubes at different tool rotational speeds |
Journal of Strain Analysis for Engineering Design |
1035 |
2017 |
M.K.S. Sarkar, D.N. Basu |
Numerical Comparison of Thermalhydraulic Aspects of Supercritical Carbon Dioxide and Subcritical Water-based Natural Circulation Loop |
Nuclear Engineering and Technology |
1036 |
2017 |
Sumant Pushp, Adity Saikia, Arif Khan and Shyamanta Hazarika |
A Cognitively Enhanced Collaborative Control Architecture for an Intelligent Wheelchair: Formalization, Implementation, and Evaluation |
Cognitive Systems Research |
1037 |
2017 |
Prakash Kumar Sahu, Sukhomay Pal and Surjya K. Pal |
Al/Cu Dissimilar FSW with Ni, Ti and Zn Foil as Interlayer for Flow Control, Enhancing Mechanical and Metallurgical Properties |
Metallurgical and Materials Transactions A |
1038 |
2017 |
R. Kumar and S. D. Kore |
Electromagnetic Crimping in Tube-to-Cylinder Configuration: Influence of the Base Profiles on the Joint Quality |
Journal of Testing and Evaluation |
1039 |
2017 |
H. Sarangi, K.S.R.K. Murthy and D. Chakraborty |
Accurate measurement of mixed mode (I/II) stress intensity factors using strain gages |
ASTM: Journal of Testing and Evaluation |
1040 |
2017 |
U.S. Tejaswini, D.N. Basu, M. Pandey |
Improved Scaling Analysis for Heat Transfer in a Circular Tube with Various Supercritical Fluids using Computational Fluid Dynamics Simulations |
Heat Transfer Engineering |
1041 |
2017 |
S. Timung, J. Chaudhuri, M. P. Borthakur, T. K. Mandal, G. Biswas and D. Bandyopadhyay |
Electric field mediated spraying of miniaturized droplets inside microchannel |
Electrophoresis |
1042 |
2017 |
H. Gaikwad, P. K. Mondal |
Slip driven electroosmotic transport through porous media |
Electrophoresis |
1043 |
2017 |
P. Kishore Kumar, M. Charan, and S. Kanagaraj. |
Trends and challenges in lower limb prostheses |
IEEE potentials |
1044 |
2017 |
A Bhowmick, SM Hazarika |
An insight into assistive technology for the visually impaired and blind people: state-of-the-art and future trends |
Journal on Multimodal User Interfaces |
1045 |
2017 |
A Saikia, SM Hazarika |
cBDI: Towards an Architecture for Human–Machine Collaboration |
International Journal of Social Robotics |
1046 |
2017 |
Arbind Prasad, M. Ravi Sankar, Vimal Katiyar |
State of Art on Solvent Casting Particulate Leaching Method for Orthopedic Scaffolds Fabrication |
Materials Today: Proceedings |
1047 |
2017 |
Arbind Prasad, Siddhart Mohan Bhasney, M. Ravi Sankar, Vimal Katiyar |
Fish Scale Derived Hydroxyapatite reinforced Poly (Lactic acid) Polymeric Bio-films: Possibilities for Sealing/locking the Internal Fixation Devices |
Materials Today: Proceedings |
1048 |
2017 |
Kishor Kumar Gajrani, M. Ravi Sankar |
State of the art on micro to nano textured cutting tools |
Materials Today: Proceedings |
1049 |
2017 |
Kishor Kumar Gajrani, M. Ravi Sankar |
Past and current status of eco-friendly vegetable oil based metal cutting fluids |
Materials Today: Proceedings |
1050 |
2017 |
P.P. Dutta, K. Kalita, U.S. Dixit and H. Liao |
Magnetic-force-assisted straightening of bent mild steel strip by laser irradiation |
Lasers in Manufacturing and Materials Processing |
1051 |
2017 |
A. Gupta, A. Prasad, N. Mulchandani, M. Shah, M. Ravi Sankar, S. Kumar, V. Katiyar |
Toughened Stereocomplex Polylactic Acid-Nano Hydroxyapatite Biocomposites with Improved Thermo-mechanical and Gas Barrier Properties: A Potential candidate for Biomedical and Engineering Applications |
American Chemical Society (ACS) Omega |
1052 |
2017 |
R. Ranjan Behera, P. M. Babu, K. Kumar Gajrani, M. Ravi Sankar |
Fabrication of micro-features on 304 stainless steel (SS-304) using Nd:YAG laser beam |
International Journal of Additive and Subtractive Materials Manufacturing |
1053 |
2017 |
U.S. Dixit, Vinod Yadav, Varun Sharma, Pulak M. Pandey, Anish Roy and Vadim Silberschmidt |
Estimation of cutting forces in conventional and ultrasonic-vibration assisted turning using inverse modelling |
International Journal of Additive and Subtractive Materials Manufacturing |
1054 |
2017 |
Kishor Kumar Gajrani, Dhanna Ram, Ravi Sankar Mamilla, Uday Shanker Dixit, P.S. Suvin and Satish Vasu Kailas |
Machining of hardened AISI H-13 steel using minimum quantity eco-friendly cutting fluid |
International Journal of Additive and Subtractive Materials Manufacturing |
1055 |
2017 |
R. Kalidasan, S. Senthilvelan, and U. S. Dixit |
An experimental study of surface roughness in double tool turning process |
International Journal of Additive and Subtractive Materials Manufacturing |
1056 |
2017 |
Ketema Bobe Bonsa, Woldetinsay Jiru, Mamilla Ravi Sankar, U. S. Dixit |
Experimental Study and Empirical Modelling of Laser Surface Finishing of Silicon Carbide |
International Journal of Additive and Subtractive Materials Manufacturing |
1057 |
2017 |
R. Tiwari |
Rotor Systems: Analysis and Identification |
CRC |
1058 |
2016 |
S.M. Kamal and U.S. Dixit |
A comparative study of thermal and hydraulic autofrettage |
Journal of Mechanical Science and Technology |
1059 |
2016 |
Desai, S., Kulkarni, V., and Gadgil, H |
Delusive Influence of Nondimensional Numbers in Canonical Hypersonic Nonequilibrium Flows |
J. Aerosp. Eng. |
1060 |
2016 |
V. Pandey, G. Biswas, and A. Dalal |
Effect of superheat and electric field on saturated film boiling |
Physics of Fluids |
1061 |
2016 |
S. Kumar, S. Bag and M. Baruah |
Finite element model for femtosecond laser pulse heating using dual phase lag effect |
Journal of Laser Applications |
1062 |
2016 |
R. K. Arun, N. Priyadarshini, K. Chaudhury, N. Chanda, G. Biswas and S. Chakraborty |
Paper-PDMS hybrid microchannel: a platform for rapid fluid-transport and mixing |
J. Micromech. Microeng |
1063 |
2016 |
R. Kore, A. Waychal, S. Agarwal, P. Yadav, A.Uddin, N. Sahoo and A. Shelke |
Impact induced solitary wave propagation through woodpile structure |
Smart Materials and Structures |
1064 |
2016 |
Ravi Peetala, Vinayak Kulkarni and Niranjan Sahoo |
Conjugate heat transfer analysis for finite thickness cylinder in hypersonic flow |
Heat transfer ? Asian Research, |
1065 |
2016 |
W.G. Jiru, M. Ravi Sankar and U.S. Dixit |
Laser surface alloying of copper, manganese and magnesium with pure aluminum substrate |
Journal of Materials Engineering and Performance |
1066 |
2016 |
H. Gurung, A. Banerjee |
Development of an extended Kalman filter for the self-sensing application of a spring-biasedshape memory alloy wire actuator |
Smart Materials and structures- IOP science |
1067 |
2016 |
Kant R. and Joshi S.N. |
Thermo-mechanical studies on bending mechanism, bend angle and edge effect during multi-scan laser bending of magnesium M1A alloy sheets. |
Journal of Manufacturing Processes |
1068 |
2016 |
Bipul Das, Sukhomay Pal, Swarup Bag |
A combined wavelet packet and Hilbert-Huang transform for defect detection and modelling of weld strength in friction stir welding process |
Journal of Manufacturing Processes |
1069 |
2016 |
B. Das, S. Pal and S. Bag |
A combined Wavelet packet and Hilbert-Huang transform for defect detection and modeling of weld strength in friction stir welding process |
Journal of Manufacturing Processes |
1070 |
2016 |
B. Das, S. Pal and S. Bag |
Monitoring of friction stir welding process using weld image information |
Science and Technology of Welding and Joining |
1071 |
2016 |
P S Rama Sreekanth, S Kanagaraj |
Effect of multi walled carbon nanotubes reinforcement and gamma irradiation on viscoelastic properties of Ultra high molecular weight polyethylene |
Materials Research Innovations |
1072 |
2016 |
R. Kalidasan, M. Yatin, D.K. Sarma, S. Senthilvelan and U.S. Dixit |
An experimental study of cutting forces and temperature in multi-tool turning of grey cast iron |
International Journal of Machining and Machinability of Materials |
1073 |
2016 |
Kishor Kumar Gajrani, Rokkham Pavan Kumar Reddy, M. Ravi Sankar |
Experimental comparative study of conventional, micro-textured and coated micro-textured tools during machining of hardened AISI 1040 alloy steel |
International Journal of Machining and Machinability of Materials |
1074 |
2016 |
Bikramjit Basu Debasish Sarkar, B. Sambi Reddy, Sourav Mandal, M. Ravi Sankar |
Uniaxial Compaction-Based Manufacturing Strategy and 3D Microstructural Evaluation of Near-Net-Shaped ZrO2-Toughened Al2O3 Acetabular Socket |
Advanced Engineering Materials |
1075 |
2016 |
Kodeeswaran, M., Verma, A., Suresh, R., Senthilvelan, S. |
Bi-directional and uni-directional bending fatigue performance of unreinforced and carbon fiber reinforced polyamide 66 spur gears |
International Journal of Precision Engineering and Manufacturing |
1076 |
2016 |
Mertens, A.J., Senthilvelan, S. |
Durability of polymer gear-paired with steel gear manufactured by wire cut electric discharge machining and hobbing |
International Journal of Precision Engineering and Manufacturing |
1077 |
2016 |
R.K. Arun, P. Singh, G. Biswas, N. Chanda and S. Chakraborty |
Energy generation from water flow over a reduced graphene oxide surface in a paper?pencil device |
Lab-on-a-Chip |
1078 |
2016 |
Meshram, P., Bhardwaj, S., and Dalal, A. |
Numerical Investigation of Two Dimensional Natural Convection and Entropy Generation inside a Porous Square Enclosure with Sinusoidally Heated Wall |
Progress in Computational Fluid Dynamics |
1079 |
2016 |
A. Ganguly, D.N. Basu |
Analysis of a Solar Photovoltaic Assisted Absorption Refrigeration System for Domestic Airconditioning |
International Journal of Green Eneegy |
1080 |
2016 |
Nicolas Suas-David, Vinayak Kulkarni, Abdessamad Benidar, Samir Kassi and Robert Georges |
Line Shape in a Free-jet Hypersonic Expansion Investigated by Cavity Ring-down Spectroscopy and Computational Fluid Dynamics |
Chemical Physics Letters |
1081 |
2016 |
A. Hens, K. Mondal, G. Biswas and D. Bandyopadhyay |
Pathways from disordered to ordered nanostructures from defect guided dewetting of ultrathin bilayers |
Journal of Colloid and Interface Science |
1082 |
2016 |
Kumar, M., Kumar, V., Muthuraja, A., Senthilvelan, S., Pugazhenthi, G. |
Influence of Nanoclay on the Rheological Properties of PMMA/Organoclay Nanocomposites Prepared by Solvent Blending Technique |
Macromolecular Symposia |
1083 |
2016 |
K. Borah, G. Natarajan, A. K. Dass |
A novel second-order flux splitting for ideal magnetohydrodynamics |
Journal of Computational Physics |
1084 |
2016 |
H. Gurung, A. Banerjee |
Self-sensing Shape Memory Alloy wire actuator based on Unscented Kalman Filter |
Sensors and Actuators A: Physical |
1085 |
2016 |
Prakash Kumar Sahu, Sukhomay Pal, Surjya K. Pal, Rahul Jain |
Influence of plate position, tool offset and tool rotational speed on mechanical properties and microstructures of dissimilar Al/Cu friction stir welding joints |
Journal of Materials Processing Technology |
1086 |
2016 |
M. Baruah and S. Bag |
Influence of heat input in microwelding of titanium alloy by micro plasma arc |
Journal of Materials Processing Technology |
1087 |
2016 |
P Abhimanyu, P Kaushik, Pranab K. Mondal, Suman Chakraborty |
Transiences in rotational electro-hydrodynamics microflows of a viscoelastic fluid under electrical double layer phenomena |
Journal of Non-Newtonian Fluid Mechanics |
1088 |
2016 |
M. Kalyan and R. Tiwari |
Multi-Objective Optimization of Needle Roller Bearings Based on Fatigue and Wear Using Evolutionary Algorithm |
Proceedings of IMechE, Part J: Journal of Engineering Tribology |
1089 |
2016 |
A Johnney Mertens and S Senthilvelan |
Durability enhancement of polymer gear using compressed air cooling |
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications |
1090 |
2016 |
S.M. Kamal and U.S. Dixit |
A study on enhancing the performance of thermally autofrettaged cylinder through shrink-fitting |
ASME. Journal of Manufacturing Science and Engineering |
1091 |
2016 |
D.N. Basu, A. Ganguly |
Solar Thermal-Photovoltaic Powered Potato Cold Storage ? Conceptual Design and Performance Analyses |
Applied Energy |
1092 |
2016 |
D. Gayen and D. Chakraborty |
Variation of Local Flexibility Coefficient of Functionally Graded Cracked Shafts |
Procedia Engineering |
1093 |
2016 |
S. R. Nanda, V. Kulkarni and N. Sahoo |
Design of artificial neuro-fuzzy based methodology for six component force balance |
Procedia Engineering |
1094 |
2016 |
B. Das, S. Pal and S. Bag |
Defect Detection in Friction Stir Welding Process Using Signal Information and Fractal Theory |
Procedia Engineering |
1095 |
2016 |
S. Mahto, A.K. Gogoi, U.S. Dixit |
A comparative study of improved dynamics of single link flexible revolute-jointed robotic manipulator |
Procedia Engineering |
1096 |
2016 |
B. Das, S. Pal and S. Bag |
Defect detection if friction stir welding process using signal information and fractal theory |
Procedia Engineering |
1097 |
2016 |
H. Gurung, A. Banerjee |
Self-sensing SMA Actuator using Extended Kalman Filter and Artificial Neural Network |
Procedia Engineering |
1098 |
2016 |
A. Garg, S.K. Dwivedy |
Nonlinear Dynamics of Axially Loaded Piezoelectric Energy Harvester |
Procedia Engineering |
1099 |
2016 |
Tarigopula Praveen Kumar, Santosha K. Dwivedy |
Dynamic Analysis of MRE Embedded Sandwich Plate Using FEM |
Procedia Engineering |
1100 |
2016 |
Praveen Kumar, S.K. Dwivedy, Poonam Kumari |
Dynamic Analysis of Piezoelectric Based Energy Harvester under Periodic Excitation |
Procedia Engineering |
1101 |
2016 |
A. Raj, A. Garg, S.K. Dwivedy |
Nonlinear Dynamics of Energy Harvester Based on Flow Induced Vibration |
Procedia Engineering |
1102 |
2016 |
S. Mohanty, S.K. Dwivedy |
Linear and Nonlinear Analysis of Piezoelectric Based Vibration Absorber with Acceleration Feedback |
Procedia Engineering |
1103 |
2016 |
Mali Akshay R, Kalita K., Reddy A. N., |
Solution of Linear Time Periodic Dynamical System with Application to Electrical Machines Using Chebyshev Polynomial Approach |
Procedia Engineering |
1104 |
2016 |
Yeshwant S. S., Kumar S., Jain K. K., Behera S. K., Gandhi D., Raghavendra S., Kalita K., |
Design of Suspension System for Formula Student Race Car |
Procedia Engineering |
1105 |
2016 |
Kumar G., Choudhury M. D., Natesan S., Kalita K., |
Design and Analysis of a Radial Active Magnetic Bearing for Vibration Control. |
Procedia Engineering |
1106 |
2016 |
Kumar G., Kalita K., |
Vibration Control using BCW Induction Motor |
Procedia Engineering |
1107 |
2016 |
Ahmed F., Kumar G., Choudhury M.D., Kalita K., |
Bridge Configured Wounded Switched Reluctance Motor |
Procedia Engineering |
1108 |
2016 |
S. Peter and A. K. De |
Energy Transfer and Associated Forces in Fluid-structure Interactions |
Procedia Engineering |
1109 |
2016 |
B. J. Bora and U. K. Saha |
Theoretical performance limits of a biogas?diesel powered dual fuel diesel engine for different combinations of compression ratio and injection timing |
ASCE Journal of Energy Engineering |
1110 |
2016 |
Kumari, P., Behera, S., Kapuria |
Coupled three-dimensional piezoelasticity solution for edge effects in Levy-type rectangular piezolaminated plates using mixed field extended Kantorovich method |
Composite Structures |
1111 |
2016 |
S. Sarma, N. Sahoo and A. Unal |
Thin film gauges using carbon nanotubes as composite layers |
ASME Journal of Engineering Materials and Technology |
1112 |
2016 |
Prasenjit Khanikar, Qifeng Wu and M. A. Zikry |
Dynamic Fracture of Aluminum-Bonded Composites |
ASME Journal of Engineering Materials and Technology |
1113 |
2016 |
B. J. Bora and U. K. Saha |
Estimating the theoretical performance limits of a biogas powered dual fuel diesel engine using emulsified rice bran biodiesel as pilot fuel |
ASME Journal of Energy Resources Technology |
1114 |
2016 |
Jyoti Kumar Doley, Sachin D Kore |
A Study on Friction Stir Welding of Dissimilar Thin Sheet Aluminium Alloys AA 5052-AA 6061 |
Journal of Manufacturing Science and Engineering |
1115 |
2016 |
S. Singh and R. Tiwari |
Model-Based Switching-Crack Identification in a Jeffcott Rotor with an Offset Disc Integrated with an Active Magnetic Bearing |
ASME, Journal of Dynamic Systems, Measurement and Control |
1116 |
2016 |
S Kapil, P Eberhard, SK Dwivedy |
Dynamic analysis of cold-rolling process using the finite-element method |
ASME, Journal of Manufacturing Science and Engineering |
1117 |
2016 |
Hakeem Niyas, Sunku Prasad, P. Muthukumar |
Performance investigation of a lab-scale latent heat storage prototype - Numerical results, |
Energy Conversion and Management |
1118 |
2016 |
P. Kalita, A.K. Dass |
A diffusion-regulated scheme for the compressible Navier-Stokes equations using a boundary-layer sensor |
Computer and Fluids |
1119 |
2016 |
S. Sarkar, S. Ganguly, G. Biswas and P. Saha |
Effect of cylinder rotation during mixed convective flow of nanofluids past a circular cylinder |
Computers and Fluids |
1120 |
2016 |
S. Peter and A. K. De |
Wake instability modes for forced transverse oscillation of a sphere |
Ocean Engineering |
1121 |
2016 |
M. Sharma, S. C. Mishra, P. Mahanta |
Effect of burner configuration and operating parameters on the performance of kerosene pressure stove with submerged porous medium combustion |
Applied Thermal Engineering |
1122 |
2016 |
Rabha DK, Muthukumar P, Somayaji C |
Experimental Investigation of Thin Layer Drying Kinetics of Ghost Chill Pepper (Capsicum Chinense Jacq.) Dried in a Forced Convection Solar Tunnel Dryer. |
Renewable Energy |
1123 |
2016 |
Rabha DK, Muthukumar P, Somayaji C |
Energy and exergy analyses of the solar drying processes of Ghost Chilli Pepper and Ginger. |
Renewable Energy |
1124 |
2016 |
M.Krishnani |
On the Validity of Boussinesq Approximation in Transient Simulation of Single-phase Natural Circulation Loops |
International Journal of Thermal Sciences |
1125 |
2016 |
S. Agarwal, N. Sahoo and R.K. Singh |
Experimental techniques for thermal product determination of coaxial surface junction thermocouples during short duration transient measurements |
International Journal of Heat and Mass Transfer |
1126 |
2016 |
M. Sharma, P. Mahanta, S. C. Mishra |
Usability of porous burner in kerosene pressure stove: An experimental investigation aided by energy and exergy analyses |
Energy |
1127 |
2016 |
A. Sinha, H. Chattopadhyay, A. K. Iyengar, G. Biswas |
Enhancement of heat transfer in a fin-tube heat exchanger using rectangular winglet type vortex generators |
International Journal of Heat and Mass Transfer |
1128 |
2016 |
Muthukumar P, Manojkumar S Patil, Nithin Narmada R, Mohd Imran |
Parametric Investigations on Compressor-Driven Metal Hydride Based Cooling System |
Applied Thermal Engineering, |
1129 |
2016 |
A. Mukherjee, A. Lahiri, and S.C. Mishra |
Analyses of dual-phase lag heat conduction in 1-D cylindrical and spherical geometry - an application of the lattice Boltzmann method |
International Journal of Heat and Mass Transfer |
1130 |
2016 |
Ambesh Kumar and Satyajit Panda. |
Design of a 1-3 viscoelastic composite layer for improved free/constrained layer passive damping treatment of structural vibration |
Composites Part B: Engineering |
1131 |
2016 |
S. Panigrahy, N.K. Mishra, S.C. Mishra, and P. Muthukumar |
Numerical and experimental analyses of LPG combustion in a domestic cooking stove with a porous radiant burner |
Energy |
1132 |
2016 |
S. Panigrahy and S.C. Mishra |
Analysis of combustion of liquefied petroleum gas in a porous radiant burner |
International Journal of Heat and Mass Transfer |
1133 |
2016 |
Deepak Kumar Yaduwanshi, Swarup Bag and Sukhomay Pal |
Numerical modeling and experimental investigation on plasma-assisted hybrid friction stir welding of dissimilar materials |
Materials and Design |
1134 |
2016 |
D. Yaduwanshi, S. Bag and S. Pal |
Numerical modeling and experimental investigation on plasma assisted hybrid friction stir welding for dissimilar materials |
Materials & Design |
1135 |
2016 |
B. J. Bora and U. K. Saha |
Optimisation of injection timing and compression ratio of a raw biogas powered dual-fuel diesel engine |
Applied Thermal Engineering |
1136 |
2016 |
A. K. De |
A diffuse interface immersed boundary method for convective heat and fluid flow |
International Journal of Heat and Mass Transfer |
1137 |
2016 |
Naik BK, Ankit Soni, Amit kumar, Muthukumar P, Somayajia C. |
Coupled Heat and Mass Transfer Analysis of an Adiabatic Dehumidifier ? Unique Approach. |
Energy Procedia |
1138 |
2016 |
Naik BK,Varshney A, Muthukumar P, Somayajia C. |
Modelling and Performance Analysis of U Type Evacuated Tube Solar Collector Using Different Working Fluids. |
Energy Procedia |
1139 |
2016 |
B. J. Bora and U. K. Saha |
Experimental evaluation of a rice bran oil methyl ester-biogas run dual fuel diesel engine at varying compression ratios |
Renewable Energy |
1140 |
2016 |
D. Chakraborty, K.S.R.K. Murthy and D. Chakraborty |
Determination of KI in orthotropic laminates with double ended cracks using a single strain gage technique |
Theoretical and Applied Fracture Mechanics |
1141 |
2016 |
N. Yadaiah, S. Bag, C. P. Paul and L. M. Kukreja |
Influence of self-protective atmosphere in fiber laser welding of austenitic stainless steel |
International Journal of Advanced Manufacturing Technology |
1142 |
2016 |
Sachin Singh, A.S Arjun Raj, M. Ravi Sankar, V. K. Jain |
Finishing force analysis and simulation of nanosurface roughness in abrasive flow finishing process using medium rheological properties |
International Journal of Advanced Manufacturing Technology |
1143 |
2016 |
V. K. Jain, J. Ramkumar |
Nano-finishing of cylindrical hard steel tubes using rotational abrasive flow finishing (R-AFF) process |
International Journal of Advanced Manufacturing Technology |
1144 |
2016 |
Rasmi Ranjan Behera, Mamilla Ravi Sankar, J. Swaminathan, |
Experimental investigation of underwater laser beam micromachining (UW-LB?M) on 304 stainless steel |
International Journal of Advanced Manufacturing Technology |
1145 |
2016 |
Bin R. W., Goel S., Davim J.P, and Joshi S. N. |
Parametric design optimization of hard turning of AISI 4340 steel |
International Journal of Advanced Manufacturing Technology |
1146 |
2016 |
Debaleena Chakraborty, K.S.R.K. Murthy and D. Chakraborty |
Determination of KI in orthotropic laminates with double ended cracks |
Theoretical and Applied Fracture Mechanics |
1147 |
2016 |
A. Sasmal and S.C. Mishra |
Analysis of conduction and radiation heat transfer in a differentially heated 2-D square enclosure |
Heat Transfer - Asian Research |
1148 |
2016 |
D. Gayen, D. Chakraborty and R. Tiwari |
Whirl Frequencies and Critical Speeds of a Rotor-Bearing System with a Cracked Functionally Graded Shaft - Finite Element Analysis |
European Journal of Mechanics -A/ Solids |
1149 |
2016 |
S. Arun, S. Kanagaraj |
Performance enhancement of epoxy based sandwich composites using multiwalled carbon nanotubes for the application of sockets in trans-femoral amputees. |
Journal of Mechanical Behavior of Biomedical Materials |
1150 |
2016 |
N. Sahoo and R. Kumar |
Performance assessment of thermal sensors during short-duration convective surface heating measurements |
Heat and Mass Transfer |
1151 |
2016 |
S. M. Kamal, A.Ch. Borsaikia and U. S. Dixit |
Experimental assessment of residual stresses induced by the thermal autofrettage of thick-walled cylinders |
Journal of Strain Analysis for Engineering Design |
1152 |
2016 |
J. Kalivarapu, S. Jain and S. Bag |
An improved harmony search algorithm with dynamically varying bandwidth |
Engineering Optimization |
1153 |
2016 |
H. Sarangi, K.S.R.K. Murthy and D. Chakraborty |
Accurate measurement of mixed mode (I/II) stress intensity factors using strain gages |
ASTM Journal of Testing and Evaluation |
1154 |
2016 |
H. Sarangi, K.S.R.K. Murthy and D. Chakraborty |
Accurate Measurement of Mixed Mode (I/II) |
Journal of Testing and Evaluation |
1155 |
2016 |
V. Satheeshkumar, R. Ganesh Narayanan |
Experimental evaluation and prediction of formability of adhesive bonded steel sheets at different adhesive properties |
Journal of Testing and Evaluation |
1156 |
2016 |
S. Sarma, N. Sahoo and A. Unal |
Calibration of silver thin film gauge for short duration step heat load |
Sadhna ? Indian Academy of Sciences |
1157 |
2016 |
C. Shravan and R. Tiwari |
Detection of a Fatigue Crack in a Rotor System using Full-Spectrum Based Estimation |
Sadhana ? Indian Academy Proceedings in Engineering |
1158 |
2016 |
S. Peter and A. K. De |
A parallel implementation of the ghost-cell immersed boundary method with application to stationary and moving boundary problems |
Sadhana, Indian Academy of Science |
1159 |
2016 |
Harshad gaikwad, D.N. Basu, Pranab K. Mondal |
Electroosmotic transport of immiscible binary system with a layer of non-conducting fluid under interfacial slip: The role applied pressure gradient |
Electrophoresis |
1160 |
2016 |
S. Samanta, D.N. Basu |
Energy and Entropy-based Optimization of a Single-stage Water-Lithium Bromide Absorption Refrigeration System |
Heat Transfer Engineering |
1161 |
2016 |
Kant R. and Joshi S.N. |
Numerical and Experimental Studies on the Laser Bending of Magnesium M1A Alloy. |
Lasers in Engineering (Old City Publishing) |
1162 |
2016 |
H Chaudhary, SD Kore |
Electromagnetic forming analysis of AA5182 at elevated temperatures |
International Journal of Microstructure and Materials Properties |
1163 |
2016 |
Sharad R. Valvi, Arun Krishnan, Sumitesh Das, R. Ganesh Narayanan |
Prediction of microstructural features and forming of Friction Stir Welded sheets using Cellular Automata Finite Element (CAFE) approach |
International Journal of Material Forming |
1164 |
2016 |
M.D. Ghatak, P. Mahanta |
Biogas purification using chemical absorption |
International Journal of Engineering and Technology |
1165 |
2016 |
B. Das, S. Pal and S. Bag |
Defect detection in friction stir welding process through characterization of signals by fractal dimension |
Manufacturing Letters |
1166 |
2016 |
R. Kalidasan, J. Vaibhav, S. Senthilvelan and U. S. Dixit |
Double tool turning: machining accuracy, cutting tool wear and chip-morphology |
International Journal of Precision Technology |
1167 |
2016 |
Sachin Singh, M. Ravi Sankar, V. K. Jain, J. Ramkumar |
Modeling of Nano Finishing Forces and Surface Roughness in Abrasive Flow Finishing (AFF) Process using Rheological Properties |
International Journal of Precision Technology |
1168 |
2016 |
Alisha Prasad, Kuldeep Mahato, Pranjal Chandra, Ananya Srivastava, Shrikrishna N. Joshi, and Pawan Kumar Maurya |
Bioinspired Composite Materials: Applications in Diagnostics and Therapeutics |
Journal of Molecular and Engineering Materials |
1169 |
2016 |
D. Chakraborty, D. Chakraborty and K. S. R. K. Murthy |
Optimal strain gage location for determination of mode I stress intensity factor for orthotropic laminates using a single strain gage |
Challenge Journal of Structural Mechanics |
1170 |
2015 |
V.Yadav,A.K.Singh and U.S.Dixit |
Inverse estimation of thermal parameters and friction coefficient during warm flat rolling process. |
Internation Journal of Mechanical Sciences |
1171 |
2015 |
PS Rama Sreekanth, S Kanagaraj |
Influence of multi walled carbon nanotubes reinforcement and gamma irradiation on the wear behaviour of UHMWPE |
Wear |
1172 |
2015 |
Sachin Singh, , M. Ravi Sankar |
Design and Performance Evaluationof Abrasive Flow Finishing Process during Finishing of Stainless Steel Tube Process during Finishing of Stainless Steel Tubes |
Materials Today:Procedia |
1173 |
2015 |
A. Muthuraja and S. Senthilvelan |
Adhesive wear performance of tungsten carbide based self-lubricant cutting tool material |
International Journal of Refractory Metals and Hard Materials |
1174 |
2015 |
S Kirtania and D Chakraborty |
Failure analysis of carbon nanotube/epoxy composites having a broken carbon nanotube |
Journal of Reinforced Plastics and Composites |
1175 |
2015 |
Biswajit Parida, Shiv Dayal Vishwakarma and Sukhomay Pal |
Design and Development of Fixture and Force Measuring System for Friction Stir Welding Process Using Strain Gauges |
Journal of Mechanical Science and Technology |
1176 |
2015 |
B. Nayak, S. K. Dwivedy, K.S.R.K. Murthy |
Fabrication and characterization of magnetorheological elastomer with carbon black |
Journal of Intelligent Material Systems and Structures |
1177 |
2015 |
Kumar A. M. S, Panda, S. and Chakraborty, D. |
Harmonically exited nonlinear vibration of heated functionally graded plates integrated with piezoelectric composite actuator |
Journal of Intelligent Material Systems and Structures |
1178 |
2015 |
Arun Kadian & Biswas Pankaj |
A Comparative Study of Material Flow Behavior in Friction Stir Welding using Laminar and Turbulent Models, Journal of Materials Engineering and Performance |
Journal of Materials Engineering and Performance |
1179 |
2015 |
Biswajit Parida and Sukhomay Pal |
A fuzzy assisted grey Taguchi approach for the optimization of multiple weld quality properties in friction stir welding process |
Science and Technology of Welding and Joining |
1180 |
2015 |
Barkachary B. M. and Joshi S. N. |
Integrated finite element method (FEM) and response surface methodology (RSM) based modeling and simulation of single point diamond turning (SPDT) of silicon |
International Journal of Machining and Machinability of Materials |
1181 |
2015 |
Hakeem Niyas, Likhendra Prasad, Muthukumar P |
Performance Investigation of High-Temperature Sensible Heat Thermal Energy Storage System during Charging and Discharging Processes. |
Clean Technologies and Environmental Policy, |
1182 |
2015 |
Jagu S. Rao and R. Tiwari |
A Pareto Optimal Design Analysis of Magnetic Thrust Bearings using Multi Objective Genetic Algorithms |
International Journal for Computational Methods in Engineering Science and Mechanics |
1183 |
2015 |
V. Waghole and R. Tiwari |
Optimization of Spherical Roller Bearing Design using Artificial Bee Colony Algorithm and Grid Search Method |
International Journal for Computational Methods in Engineering Science and Mechanics(DOI: 10.1080/15502287.2015.1045998) |
1184 |
2015 |
Pandey, V.,?Dalal, A., Biswas, G., |
Bubble Formation in Film Boiling Including Electrohydrodynamic Forces |
Procedia IUTAM |
1185 |
2015 |
V. Satheeshkumar, R. Ganesh Narayanan |
Prediction of formability of adhesive bonded steel sheets and experimental validation |
Archives of Civil and Mechanical Engineering |
1186 |
2015 |
A. K. Mondal, P. Biswas, S. Bag |
Influence of tacking sequence on residual stress and distortion of single sided fillet submerged arc welded joint |
Journal of Marine Science and Application |
1187 |
2015 |
Satya Sekhar B, Muthukumar P |
Performance Investigation of a Single-stage Metal Hydride Heat Transformer. |
Int. J Green Energy |
1188 |
2015 |
B. Das, S. Bag and S. Pal |
Defect detection in friction stir welding process through characterization of signals by fractal dimension |
Manufacturing Letters |
1189 |
2015 |
Arbind Prasad, B. Devendar, M. Ravi Sankar, P.S. Robi |
Micro-Scratch Based Tribological Characterization of Hydroxyapatite (HAp) Fabricated through Fish Scales |
Materials Today:Procedia |
1190 |
2015 |
Rasmi Ranjan Behera, M. Ravi Sankar |
State of the Art on Under Liquid Laser Beam Machining |
Materials Today: Procedia |
1191 |
2015 |
B. Ray, G. Biswas and A. Sharma |
Regimes during liquid drop impact on a liquid pool |
Journal of Fluid Mechanics |
1192 |
2015 |
AmitavaGhatak and P.S.Robi |
A comparative study of constitutive equations for the creep deformation of HP40Nb micro-alloyed steel |
Materials Sci. &Engg.-A |
1193 |
2015 |
Lototskyy MV, Sekhar BS, Muthukumar P, Pollet BG, Linkov V |
Niche applications of metal hydrides and related thermal management issues. |
J. Alloys and Compounds |
1194 |
2015 |
L. Roy and S . K. Kakoty |
Application of Genetic Algorithm in Optimization of Hydrodynamic Bearings |
Advances in Intelligent Systems and Computing |
1195 |
2015 |
M.K.S. Sarkar, D.N. Basu |
Working Regime Identification for Natural Circulation Loops by Comparative Thermalhydraulic Analyses with Three Fluids under Identical Operating Conditions |
Nuclear Engineering and Design |
1196 |
2015 |
A.K. Tilak, D.N. Basu |
Computational Investigation of the Dynamic Response of a Supercritical Natural Circulation Loop to Aperiodic and Periodic Excitations |
Nuclear Engineering and Design |
1197 |
2015 |
Ganesh Natarajan |
Bio-allometry inspired resource estimation in Twenty20 cricket |
Proceedings of IMechE, Part P: Journal of Sports Engineering and Technology |
1198 |
2015 |
Lintu Roy and S.K. Kakoty |
Groove location for optimum performance of three- and four-lobe bearings using genetic algorithm |
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology January 2015 |
1199 |
2015 |
Deepak Kumar Yaduwanshi, Swarup Bag and Sukhomay Pal |
Heat transfer analyses in friction stir welding of aluminum alloy |
I Mech. E Part B: Journal of Engineering Manufacture |
1200 |
2015 |
Kant R. and Joshi S. N. |
Numerical Modeling and Experimental Validation of Curvilinear Laser Bending of Magnesium Alloy Sheets |
Proceedings of The Institute of Mechanical Engineering Part B: Journal Of Engineering Manufacture |
1201 |
2015 |
Kumar A S P., Panda S and Reddy N. H |
Smart damping of vibration of annular plates through the design of a cylindrically orthotropic piezoelectric fiber-reinforced composite actuator |
Acta Mechanica |
1202 |
2015 |
A. Hens, G. Biswas and S. De |
Evaporation of water droplets on Pt-surface in presence of external electric field ? A molecular dynamics study |
The Journal of Chemical Physics |
1203 |
2015 |
Sekhar BS, Muthukumar P |
Development of Double-Stage Metal Hydride based Hydrogen Compressor for Heat Transformer Application, |
Journal of Energy Engineering |
1204 |
2015 |
D.N. Basu, A. Ganguly |
Conceptual Design and Performance Analysis of a Solar Thermal-Photovoltaic-Powered Absorption Refrigeration System |
Journal of Solar Energy Engineering |
1205 |
2015 |
Varma, N., Dulhani, J. P., Dalal, A., Sarkar, S., and Ganguly, S. |
Effect of Channel Confinement on Mixed Convective Flow Past an Equilateral Triangular Cylinder |
ASME Journal of Heat Transfer |
1206 |
2015 |
S.M.kamal and U.S.Dixit |
Flexibility study of thermal autofrettage of thick-walled cylinders. |
ASME Journal of Pressure Vessel Technology |
1207 |
2015 |
B J Bora and U K Saha |
Improving the performance of a biogas powered dual fuel diesel engine using emulsified rice bran biodiesel as pilot fuel through adjustment of compression ratio and injection timing |
ASME Journal of Engineering for Gas Turbines and Power |
1208 |
2015 |
R. Tiwari and R. C. M. Chandran |
Multitude of Objectives Based Optimum Designs of Cylindrical Roller Bearings Using Evolutionary Algorithms |
ASME Journal of Tribology |
1209 |
2015 |
S Roy and U K Saha |
Wind tunnel experiments of a newly developed two-bladed Savonius-style wind turbine. |
Applied Energy |
1210 |
2015 |
D. Chatterjee and G. Biswas |
Dynamic behavior of flow around rows of square cylinders kept in staggered arrangement |
Journal of Wind Engineering and Industrial Aerodynamics |
1211 |
2015 |
R. Singh, A. Sasmal and S.C. Mishra |
Nanoparticle mediated transmittance signals from pulsed laser irradiated cancerous lung as a function of respiration |
Optik - International Journal for Light and Electron Optics |
1212 |
2015 |
MSA Kumar, S Panda and D Chakraborty |
Design and analysis of a smart graded fiber-reinforced composite laminated plate |
Composite Structures |
1213 |
2015 |
L. Hauchhum, P. Mahanta, J.De Wilde |
Capture of CO2 from Flue Gas onto Coconut Fibre-Based Activated Carbon and Zeolites in a Fixed Bed |
Transport in Porous Media |
1214 |
2015 |
G. Natarajan, N. Sahoo, V. Kulkarni |
Optimal fore-body shape for minimum drag in supersonic flow |
Journal of the Institution of Engineers (India): Series C |
1215 |
2015 |
R. Tiwari and V. Talatam |
Estimation of Speed-Dependent Bearing Dynamic Parameters in Rigid Rotor Systems Levitated by Electromagnetic Bearings |
Mechanism and Machine Theory |
1216 |
2015 |
P. Randive, A. Dalal, K.C. Sahu, G. Biswas, P. Mukherjee |
Wettability effects on contact line dynamics of droplet motion in an inclined channel |
Physical Review E |
1217 |
2015 |
R. Singh, K. Das, J. Okajima, S. Maruyama and? S.C. Mishra |
Modelling skin cooling using optical windows and cryogens during laser induced hyperthermia in a multilayer vascularized tissue, |
Applied Thermal Engineering |
1218 |
2015 |
N. K. Mishra, S.C. Mishra and P. Muthukumar |
Performance characterization of a medium-scale liquefied petroleum gas cooking stove with a two-layer porous radiant burner |
Applied Thermal Engineering |
1219 |
2015 |
Panda S, Reddy N. H. and Kumar A. S. P. |
Design and finite element analysis of a short piezoelectric fiber-reinforced composite actuator |
Archive of Applied Mechanics |
1220 |
2015 |
B J Bora and U K Saha |
Comparative assessment of a biogas run dual fuel diesel engine with rice bran oil methyl ester, pongamia oil methyl ester and palm oil methyl ester as pilot fuels |
Renewable Energy |
1221 |
2015 |
Kumar, A. M. S., Panda, S., Kumar S. and Chakraborty, D. |
A design of laminated composite plates using graded orthotropic fiber-reinforced composite plies |
Composites Part B: Engineering |
1222 |
2015 |
Bhardwaj, S., and Dalal, A., and Pati |
Influence of Wavy Wall and Non-uniform Heating on Natural Convection Heat Transfer and Entropy Generation Inside Porous Complex Enclosure |
Energy |
1223 |
2015 |
Manas Das, V.K. Jain, P.S Ghoshdastidar |
A 2D CFD simulation of MR polishing medium in magnetic field-assisted finishing process using electromagnet |
International Journal of Advanced Manufacturing Technology |
1224 |
2015 |
V. Satheeshkumar, R. Ganesh Narayanan |
In-plane plane-strain formability of adhesive bonded steel sheets: Influence of adhesive properties |
International Journal Advanced Manufacturing Technology |
1225 |
2015 |
S.C. Mishra and R. K. Chourasia ? |
Analysis of dual-phase-lag non-Fourier conduction and radiation heat transfer in a planar slab |
Numerical Heat Transfer, Part A, |
1226 |
2015 |
S. Biswas, P. Sharma, B. Mondal and G. Biswas |
Analysis of Mixed Convective Heat Transfer in a Ribbed Channel using The Lattice Boltzmann Method |
Numerical Heat Transfer Part A |
1227 |
2015 |
V.K. Mishra, S.C. Mishra, D.N. Basu |
Combined Mode Conduction and Radiation Heat Transfer in a Porous Medium and Estimation of Optical Properties of the Porous Matrix |
Numerical Heat Transfer Part A |
1228 |
2015 |
Bhardwaj, S., and Dalal, A. |
Effect of Undulations on the Natural Convection Heat Transfer and Entropy Generation Inside Porous Right-angled Triangular Enclosure |
Numerical Heat Transfer:?Part A |
1229 |
2015 |
Dulhani, J. P., and Dalal, A. |
Flow past an equilateral triangular bluff obstacle: computational study of the effect of thermal Buoyancy on flow physics and heat transfer |
?Numerical Heat Transfer:Part A |
1230 |
2015 |
Satya Sekhar B, Muthukumar P |
Thermal modelling of a double-stage metal hydride based heat transformer. |
Numerical Heat Transfer Part A |
1231 |
2015 |
I. Chakraborty, G. Biswas, S. Polepalle and P.S. Ghoshdastidar |
Bubble Formation and Dynamics in a Quiescent High-Density Liquid |
AIChE Journal |
1232 |
2015 |
V. Satheeshkumar, R. Ganesh Narayanan |
Forming performance of adhesive bonded steel sheets reinforced with metallic wires |
Welding in the World: The International Journal of Materials Joining |
1233 |
2015 |
Randive, P., and Dalal, A. |
Influence of Geometry on Mobilization of Trapped Blob |
European Journal of Mechanics - B/Fluids |
1234 |
2015 |
K. Das and S.C. Mishra |
Simultaneous estimation of size, radial and angular locations of a malignant tumor in a 3-D human breast - A numerical approach |
Journal of Thermal Biology, |
1235 |
2015 |
A. Muthuraja and S. Senthilvelan |
Abrasive wear performance of tungsten carbide based self-lubricant cutting tool material |
International Journal of Refractory Metals and Hard Materials |
1236 |
2015 |
A. Bhowmik, R. Repaka, R. Mulaveesala and S.C. Mishra |
Suitability of frequency modulated thermal wave imaging for skin cancer detection - A theoretical prediction, |
Journal of Thermal Biology |
1237 |
2015 |
A. Bhowmik, R. Repaka, S.C. Mishra and K. Mitra |
Thermal assessment of ablation limit of subsurface tumor during focused ultrasound and laser heating, |
ASME Journal of Thermal Science and Engineering Applications |
1238 |
2015 |
Perumalla Janaki Ramulu, Satish V. Kailas, R. Ganesh Narayanan |
Formability of friction stir welded sheets made of AA 6061-T6 at different weld orientations and weld locations |
International Journal Materials and Product Technology |
1239 |
2015 |
A. Muthuraja and S. Senthilvelan |
Development of tungsten carbide based self lubricant cutting tool material: Preliminary investigation |
International Journal of Refractory Metals and Hard Materials |
1240 |
2015 |
V. Satheeshkumar, R. Ganesh Narayanan |
Experimental evaluation and prediction of deep drawability of adhesive bonded steel sheets |
Materialwissenschaft und Werkstofftechnik |
1241 |
2015 |
B K Debnath, U K Saha and N Sahoo |
A comprehensive review on the application of emulsion as an alternative fuel for diesel engine. |
Renewable and Sustainable Energy Reviews |
1242 |
2015 |
Dawit . G. Gunjo, P. K. Mahanta, P. S. Robi |
Impact of Ambient Conditions and Top Heat loss on Useful Energy of Flat Plate Solar Collectors |
International Journal of Emerging Trends in Electrical and Electronics |
1243 |
2015 |
Panda, S. P, and Panda, S. |
Micromechanical finite element analysis of effective properties of a unidirectional short piezoelectric fiber reinforced composite |
International Journal of Mechanics and Materials in Design |
1244 |
2015 |
Kumar D. A., Kadian Arun Kumar and Biswas Pankaj |
Numerical and experimental study on influence of tool plunging force and shoulder size on thermal history of Friction Stir Welding |
International Journal of Manufacturing Research (IJMR- Inderscience) |
1245 |
2015 |
Dixit U. S., Joshi S. N. and Kant Ravi |
Laser forming systems: a review |
International Journal of Mechatronics and Manufacturing Systems |
1246 |
2015 |
Sathisha H. M., and Dalal, A. |
Two-Dimensional Unsteady Simulation of All-Vanadium Redox Flow Battery |
ASME Journal of Thermal Science and Engineering Applications |
1247 |
2015 |
C Patel, S D Kore |
Effect of Frequency on electromagnetic expansion of thin tubes |
Journal of Machining and Forming Technologies |
1248 |
2015 |
AmitavaGhatak and P.S. Robi |
Creep Behaviour And Creep Life Assessment Of Hp40nb Reformer Steel |
Int. J. of Res. inEngg. and Appl. Sci |
1249 |
2015 |
Natesan S., Kalita K. and Venkatesu S., |
Numerical and Experimental Investigation of Bridge Currents of an Induction Machine Equipped with Bridge Configured Winding |
International Journal of Electrical and Computer Engineering |
1250 |
2015 |
PhyuPhyu Thant, P.S.Robi and P. Mahanta |
Effect of Incline in an Inclined Bubbling Fluidized Bed Paddy Dryer |
International Journal of Scientific Engineering and Technology Research |
1251 |
2015 |
Dawit.G.Gunjo,P.K.Mahanta,P.S.Robi |
Effect of pitch on heat transfer characteristic of helical coils to be used for biogas production |
Int. Journal of Res. Engg., and Technology |
1252 |
2015 |
PhyuPhyu Thant, P. Mahanta and P.S. Robi |
Effect of Spirals in an Inclined Bubbling Fluidized Bed Paddy Dryer |
International Journal of Engineering Research and Technology |
1253 |
2015 |
AmitavaGhatak and P.S.Robi |
High-temperature Deformation Behavior of HP40Nb, Micro-alloyed Reformer Steel |
Metallography. Microstructure and Analysis |
1254 |
2015 |
B. Bharat, B. S. Kiran, D. Bandopadhya |
Design and Development of a Mobile Robot for Material Handling, |
Journal of Advancement in Robotics |
1255 |
2015 |
Prakash Kumar Sahu and Sukhomay Pal |
Multi-Response Optimization of Process Parameters in Friction Stir Welded AM20 Magnesium Alloy by Taguchi Grey Relational Analysis |
Journal of Magnesium and Alloys |
1256 |
2015 |
PhyuPhyu Thant, P. Mahanta and P.S. Robi |
Performance Enhancement of Inclined Fluidized Bed Paddy Dryer by Design Modification |
International Journal of Engineering and Applied Sciences |
1257 |
2015 |
Kant R., Joshi S. N. and Dixit U. S. |
An Integrated FEM-ANN Model for Laser Bending Process with Inverse Estimation of Absorptivity |
Journal of Mechanics of Advanced Materials and Modern Processes |
1258 |
2014 |
Patel.C.,Kore, S.D. |
Dual electromagnetic forming using single uniform pressure Coil |
Key Engineering Materials |
1259 |
2014 |
Doley. J.K.,Kore, S.D. |
Electromagnetic formability of an aluminium ice tray |
Key Engineering Materials |
1260 |
2014 |
Mukesh Kumar, Satish V. Kailas, R. Ganesh Narayanan |
In-Plane Plane-Strain formability investigation of friction stir welded sheets made of dissimilar Aluminium alloys |
Applied Mechanics and Materials |
1261 |
2014 |
S. Arun, P S Rama Sreekanth, S. Kanagaraj |
Mechanical characterization of PMMA/SWNTs bone cement using Nanoindenter |
Advanced Biomaterials |
1262 |
2014 |
Debaleena Chakraborty, K.S.R.K. Murthy and D. Chakraborty |
A new single strain gage technique for the accurate determination of mode I stress intensity factor in orthotropic composite materials |
Engineering Fracture Mechanics |
1263 |
2014 |
Jagannath Sardar, Dibakar Bandopadhya |
Development and Fabrication of Cement Reinforced Polypropylene Composite Material Spur Gear, Journal of Polymer Engineering, |
Journal of Polymer Engineering |
1264 |
2014 |
S Kirtania and D Chakraborty |
Analysis of carbon nanotube-reinforced alumina matrix nanocomposites with a broken fiber |
Journal of Reinforced Plastics and Composites |
1265 |
2014 |
Chanda, A., Fischer, A., Eberhard, P., Dwivedy, S.K. |
Stability analysis of a thin-walled cylinder in turning operation using the semi-discretization method |
Acta Mechanica Sinica |
1266 |
2014 |
Mandal N. R, Sharat Kumar and Biswas Pankaj |
Distortion Measurement of Ship Blocks using Photogrammetry |
Journal of Ship Production and Design |
1267 |
2014 |
A. Hens, G. Biswas and S. De |
Analysis of interfacial instability and multimode bubble formation in saturated pool boiling using Coupled Level Set and Volume- of- Fluid approach |
Physics of Fluids |
1268 |
2014 |
A. Chaugale and R. Tiwari |
Identification of Bearing Dynamic Parameters and Unbalance States in a Flexible Rotor System Fully Levitated on Active Magnetic Bearings |
Mechatronics |
1269 |
2014 |
Deepak Kumar Yaduwanshi, Swarup Bag and Sukhomay Pal |
Effect of preheating in hybrid friction stir welding of aluminum alloy |
Journal of Materials Engineering and Performance |
1270 |
2014 |
Biswal, D.K., Bandopadhya, D., Dwivedy, S.K. |
Dynamic modeling and effect of dehydration on segmented IPMC actuators following variable parameter pseudo-rigid body modeling technique |
Mechanics of Advanced Materials and Structures |
1271 |
2014 |
A. Ghosh, P. Goswami, P.Mahanta, A. Verma, |
Effect of carbon fiber length and graphene on carbon-polymer composite bipolar plate for PEMFC |
Journal of Solid State Electrochemistry |
1272 |
2014 |
Randive,P., Dalal, A., Mukherjee, P.P. |
Mesoscopic simulation of blob resonance in a model porous pathway |
Microfluidics and Nanofluidics |
1273 |
2014 |
Randive, P.,?Dalal, A., and Mukherjee, P. P. |
Probing the Influence of Superhydrophobicity and Mixed Wettability on Droplet Displacement Behavior |
Microfluidics and Nanofluidics |
1274 |
2014 |
R. Tiwari and D. J. Bordoloi |
Unification of Multi-class Fault Classification from Diverse Domain Features of Gear Using SVM Algorithms |
International Journal of Condition Monitoring & Diagnostic Engineering |
1275 |
2014 |
N. Shanmugapriya, Chandramohan Somayaji, S. Kanagaraj |
Characterization and optimization of Ce0.6Zr0.4-xMnxO2 (x?0.4) |
Journal of Nanoparticle Research |
1276 |
2014 |
R. S. Desai and S. Bag |
Influence of displacement constraints in thermomechanical analysis of laser micro-spot welding process |
Journal of Manufacturing Processes |
1277 |
2014 |
N. Shanmugapriya, C. Somayaji, S. Kanagaraj |
Optimization of Ce0.6Zr0.4-xAl1.3xO2 solid solution based on oxygen storage capacity |
Journal of Nanoparticle Research |
1278 |
2014 |
R.K. Arun, K. Chaudhury, M. Ghosh, G. Biswas, N. Chanda and S. Chakraborty |
Controlled splitting and focusing of a stream of nanoparticles in a converging-diverging microchannel |
Lab on a Chip |
1279 |
2014 |
Ramesh, P., Bommana, D., Kulkarni, V., Sahoo, N., Dwivedy, S.K. |
Experimental assessment of noncontact type laser-based force measurement technique for impulsive loading |
International Journal of Structural Stability and Dynamics |
1280 |
2014 |
P. Gangsar and R. Tiwari |
Multi-Class Fault Taxonomy in Rolling Bearings at Interpolated and Extrapolated Speeds Based on Time Domain Vibration Data by SVM Algorithm |
Journal of Failure Analysis and Prevention |
1281 |
2014 |
Bibin John, Sarath G, Vinayak Kulkarni and Ganesh Natarajan |
Performance Comparison of Flux Schemes for Numerical Simulation of High-Speed Inviscid Flows |
Progress in Computational Fluid Dynamics |
1282 |
2014 |
Kalidasan, R., Ramanuj, V., Sarma, D.K., Senthilvelan, S. |
Influence of cutting speed and offset distance over cutting tool vibration in multi-tool turning process |
Advanced Materials Research |
1283 |
2014 |
V. Satheeshkumar, R. Ganesh Narayanan |
Influence of pre-generated infinite adhesive defects on the forming behaviour of adhesive bonded steel sheets |
Advanced Materials Research |
1284 |
2014 |
D. Doley, V. Satheeshkumar, R. Ganesh Narayanan |
Influence of wire reinforcement on the forming behaviour of adhesive bonded steel sheets |
Advanced Materials Research |
1285 |
2014 |
Mertens, A.J., Senthilvelan, S. |
Abrasive wear performance of CNT/PP composites |
Applied Mechanics and Materials |
1286 |
2014 |
G.N. Shelke,P. Mahanta |
Biomass briquette characterization for downdraft gasification |
Applied Mechanics and Materials |
1287 |
2014 |
L. Hauchhum, P. Mahanta |
CO2 capture onto zeolite 13X and zeolite 4A by pressure swing adsorption in a fixed bed |
Applied Mechanics and Materials |
1288 |
2014 |
Muthuraja, A., Senthilvelan, S |
Compaction characteristics of tungsten carbide based self lubricant cutting tool material |
Applied Mechanics and Materials |
1289 |
2014 |
Kalidasan, R., Yatin, M., Sarma, D.K., Senthilvelan, S. |
Effect of offset distance on cutting forces and heat generation in multi-tool turning process |
Applied Mechanics and Materials |
1290 |
2014 |
P Manivel, S Kanagaraj, A Balamurugan, N Ponpandian, D Mangalaraj, C Viswanathan |
Rheological behavior and electrical properties of polypyrrole/thermally reduced graphene oxide nanocomposite |
Colloids and Surfaces A: Physicochemical and Engineering Aspects |
1291 |
2014 |
D.N. Basu, S. Bhattacharyya, P.K. Das |
A Review of Modern Advances in Analyses and Applications of Single-phase Natural Circulation Loop |
Nuclear Engineering and Design |
1292 |
2014 |
M. Basumatary, G. Natarajan and S.C. Mishra |
Defect correction based velocity reconstruction for physically consistent simulations of non-Newtonian flows on unstructured grids |
Journal of? Computational Physics |
1293 |
2014 |
S Malik and S K Kakoty |
Analysis of Dimple Textured Parallel and Inclined Slider |
Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology |
1294 |
2014 |
V.K. Jain, U.S. Dixit, Christ Paul and Arvind Kumar |
Micromanufacturing: A review |
Proc. IMechE, Part B:, Journal of Engineering Manufacture |
1295 |
2014 |
S. Singh, N. Yadaiah, S. Bag and S. Pal |
Numerical simulation of welding induced residual stress in fusion welding process using adaptive volumetric heat source |
I Mech. E, Part C: Journal of Mechanical Engineering Science |
1296 |
2014 |
R. Ganesh Narayanan, Sumitesh Das |
Sustainable and Green Manufacturing and Materials Design through Computations |
Proc. of the IMecheE, Part C: Journal of Mechanical Engineering Science |
1297 |
2014 |
B K Debnath, U K Saha and N Sahoo |
An experimental way of assessing the application potential of emulsified palm biodiesel towards alternative to diesel. |
ASME Journal of Engineering for Gas Turbines and Power |
1298 |
2014 |
Sarkar, S., Ganguly, S., and Dalal, A. |
Analysis of Entropy Generation during Mixed Convective Heat Transfer of Nanofluids past a Rotating Circular Cylinder |
ASME Journal of Heat Transfer |
1299 |
2014 |
Sajan Kapil, Peter Eberhard and Santosha K. Dwivedy |
Nonlinear Dynamic Analysis of a Parametrically Excited Cold Rolling Mill |
ASME, Journal of Manufacturing Science and Engineering |
1300 |
2014 |
P Manivel, S Kanagaraj, A Balamurugan, N Ponpandian, D Mangalaraj, C Viswanathan |
Rheological behavior and electrical, thermal properties of polypyrrole/graphene oxide nanocomposites |
Journal of Applied Polymer Science |
1301 |
2014 |
Jitendra Kumar Patel and Ganesh Natarajan |
A generic framework for design of interface capturing schemes for multi-fluid flows |
Computers and Fluids |
1302 |
2014 |
Randive, P., and?Dalal, A. |
Influence of viscosity ratio and wettability on droplet displacement behavior: A mesoscale analysis |
Computers and Fluids |
1303 |
2014 |
Deepak Sharma, Kalyanmoy Deb |
Generation of Compliant Mechanisms using Hybrid Genetic Algorithm |
Journal of The Institution of Engineers (India): Series C |
1304 |
2014 |
Nayan Jyoti Baishya, Deepak Sharma, Uday S. Dixit |
Optimization of Pressure Vessel Under Thermo-Elastic Condition |
Journal of The Institution of Engineers (India): Series C |
1305 |
2014 |
S. Mahto and U.S. Dixit |
Shape optimization of revolute-jointed rigid-flexible manipulator |
Journal of Institution of Engineers (India), Series C |
1306 |
2014 |
B J Bora, U K Saha, S Chatterjee and V Veer |
Effect of compression ratio on performance, combustion and emission characteristics of a dual fuel diesel engine run on raw biogas. |
Energy Conversion and Management |
1307 |
2014 |
S Roy and U K Saha |
An adapted blockage factor correlation approach in wind tunnel experiments of a Savonius-style wind turbine. |
Energy Conversion and Management |
1308 |
2014 |
N. Yadaiah and S. Bag |
Development of egg-configuration heat source model in numerical simulation of autogeneous fusion welding processes |
International Journal of Thermal Sciences |
1309 |
2014 |
A. Sasmal and S.C. Mishra |
Analysis of non-Fourier conduction and radiation in a differentially heated 2-D square cavity, |
International Journal of Heat and Mass Transfer |
1310 |
2014 |
Anand Mohan S Senthilvelan |
Preliminary Bending Fatigue Performance Evaluation of Asymmetric Composite Gear |
Mechanism and Machine Theory, |
1311 |
2014 |
P.Kalita,P.Mahanta,U.K. Saha |
Study of bed-to-wall heat transfer with twisted tape at the upper splash region of a pressurized circulating fluidized bed unit |
International Journal of Heat and Mass Transfer |
1312 |
2014 |
R.R. Vernekar and S.C. Mishra |
Analysis of transport of short-pulse radiation in a participating medium using lattice Boltzmann method |
International Journal of Heat and Mass Transfer |
1313 |
2014 |
M. Chandrasekaran, M. Muralidhar and U.S. Dixit |
Online optimization of finish turning process: strategy and experimental validation |
International Journal of Advanced Manufacturing |
1314 |
2014 |
P. Saha, G. Biswas and S. Sarkar |
Comparison of winglet-type vortex generators periodically deployed in a plate-fin heat exchanger |
International Journal of Heat and Mass Transfer |
1315 |
2014 |
Dulhani, J. P., Sarkar, S., and?Dalal, A. |
Effect of Angle of Incidence on Mixed Convective Wake Dynamics and Heat Transfer Past a Square Cylinder in Cross Flow at Re = 100 |
International Journal of Heat and Mass Transfer |
1316 |
2014 |
Randive, P.,?Dalal, A., and Mukherjee, P. P. |
Lattice Boltzmann Modeling of Two-phase Behavior Under Acoustic Excitation: Capillarity-wettability Interaction |
International Journal of Heat and Mass Transfer |
1317 |
2014 |
M.K.S. Sarkar, A.K. Tilak, D.N. Basu |
A State-of-the-art Review of Recent Advances in Supercritical Natural Circulation Loops for Nuclear Applications |
Annals of Nuclear Energy |
1318 |
2014 |
D. J. Bordoloi and R. Tiwari |
Optimum Multi-fault Classification of Gears with Integration of Evolutionary and SVM Algorithms |
Mechanism and Machine Theory |
1319 |
2014 |
S. Sarkar, S. Ganguly and G. Biswas |
Buoyancy driven convection of nanofluids in an infinitely long channel under the effect of a magnetic field |
International Journal of Heat and Mass Transfer |
1320 |
2014 |
A. Hens, R. Agarwal and G. Biswas |
Nanoscale study of boiling and evaporation in a liquid Ar film on a Pt heater using molecular dynamics simulation |
International Journal of Heat and Mass Transfer |
1321 |
2014 |
A. Bhowmik, R. Repaka, S.C. Mishra and K. Mitra |
Analysis of radiative signals from normal and malignant human skins subjected to a short-pulse laser |
International Journal of Heat and Mass Transfer |
1322 |
2014 |
S.C. Mishra and H. Sahai |
Analysis of non-Fourier conduction and volumetric radiation in a concentric spherical shell using the lattice Boltzmann method and the finite volume method |
International Journal of Heat and Mass Transfer |
1323 |
2014 |
D. Raha, P. Mahanta, M.L. Clarke, |
The implementation of decentralised biogas plants in Assam, NE India: The impact and effectiveness of the National Biogas and Manure Management Programme |
Energy Policy |
1324 |
2014 |
A. Bhowmik, R. Repaka, and S.C. Mishra |
Thermal analysis of increasing subcutaneous fat thickness within human skin - A numerical study |
Numerical Heat Transfer, Part A |
1325 |
2014 |
S.C. Mishra , H. Poonia, A.K. Das, P. Asinari and R. Borchiellini |
Analysis of conduction-radiation heat transfer in 2-D enclosure using the lattice Boltzmann method |
Numerical Heat Transfer, Part A |
1326 |
2014 |
S.C. Mishra, R. Singh, P. Agarwal and Ch. Hari Krishna |
Analysis of radiative transport in a 2-D cylindrical participating medium subjected to collimated radiation, |
Numerical Heat Transfer, Part A |
1327 |
2014 |
S.C. Mishra, A. Akhtar and A. Garg |
Numerical analysis of Rayleigh-Benard convection with and without volumetric radiation |
Numerical Heat Transfer, Part A |
1328 |
2014 |
K. Das and S.C. Mishra |
Non-invasive estimation of size and location of a tumor in a human breast using a curve fitting technique |
International Communications in? Heat and Mass Transfer |
1329 |
2014 |
D. J. Bordoloi and R. Tiwari |
Support Vector Machine Based Optimization of Multi-Fault Classification of Gears with Evolutionary Algorithms from Time-Frequency Vibration Data |
Measurement |
1330 |
2014 |
A. J. Chaudhari, N. Sahoo and V. Kulkarni |
Simulation models for spark ignition engine: A comparative performance study |
Energy Procedia |
1331 |
2014 |
S. K. Singh, and R. Tiwari |
Detection and Localization of Multiple Cracks in a Shaft System: An Experimental investigation |
Measurement |
1332 |
2014 |
A. Bhowmik, R. Repaka and S.C. Mishra |
Thermographic evaluation of early melanoma within the vascularized skin using combined non-Newtonian blood flow and bioheat models |
Computers in Biology and Medicine |
1333 |
2014 |
S. Arun, S. Kanagaraj |
Mechanical characterization and validation of poly (methyl methacrylate)/multi walled carbon nanotube composite for the polycentric knee joint |
Journal of the Mechanical Behavior of Biomedical Materials |
1334 |
2014 |
V. Satheeshkumar, R. Ganesh Narayanan |
Formability of adhesive bonded steel sheets with artificial finite adhesive defects |
Journal of Strain Analysis for Engineering Design |
1335 |
2014 |
B. Nayak, S.K. Dwivedy and K.S.R.K. Murthy |
Dynamic stability of a rotating sandwich beam with magnetorheological elastomer core |
European Journal of Mechanics - A/Solids |
1336 |
2014 |
K. Das and S.C. Mishra |
Study of thermal behavior of a biological tissue: An equivalence of Pennes bioheat equation and Wulff continuum model |
Journal of Thermal Biology |
1337 |
2014 |
R. Singh, K. Das and S.C. Mishra |
Laser-induced hyperthermia of nanoshell mediated vascularized tissue - a numerical study |
?Journal of Thermal Biology |
1338 |
2014 |
Perumalla Janaki Ramulu, R. Ganesh Narayanan |
Influence of shoulder diameter, plunge depth, welding speed, rotational speed on the tensile behavior of friction stir welded AA 6061-T6 sheets |
Journal of Testing and Evaluation |
1339 |
2014 |
C. Loha, S. Gu, J. De Wilde, P. Mahanta, P.K. Chatterjee |
Advances in mathematical modeling of fluidized bed gasification |
Renewable and Sustainable Energy Reviews |
1340 |
2014 |
A.K.De |
An implicit non-staggered Cartesian grid method for incompressible viscous flows in complex geometries |
Sadhana, Indian Academy of Science |
1341 |
2014 |
S. Anbarasu, P. Muthukumar, and S.C. Mishra |
Tests on LmNi4.91Sn0.15 based Solid state hydrogen storage device with embedded cooling tubes - Part A: Absorption process |
International Journal of Hydrogen Energy |
1342 |
2014 |
Anbarasu S, Muthukumar P, Mishra SC |
Tests on LmNi4.91Sn0.15 based Solid State Hydrogen Storage Device with Embedded Cooling Tubes ? Part B: Desorption Process |
Int. J. Hydrogen Energy |
1343 |
2014 |
S. Anbarasu, P. Muthukumar and S.C. Mishra |
Thermal modeling of LmNi4.91Sn0.15 based Solid State Hydrogen Storage Device with Embedded Cooling Tubes |
International Journal of Hydrogen Energy |
1344 |
2014 |
PS Rama Sreekanth, S Kanagaraj |
Influence of MWCNTs and gamma irradiation on thermal characteristics of medical grade UHMWPE |
Bulletin of Material Science |
1345 |
2014 |
S.C. Mishra, H. Poonia, R. Vernekar, and A.K. Das |
Lattice Boltzmann method applied to the analysis of radiative transport problems with and without conduction in a 1-D planar medium |
Heat Transfer Engineering |
1346 |
2014 |
D. Arumuga Perumal, Anoop K Dass |
Lattice Boltzmann simulation of two- and three-dimensional incompressible thermal flows |
Heat Transfer Engineering |
1347 |
2014 |
R.P. Chopade, S.C. Mishra, P. Mahanta, S. Maruyama |
On configuration of load in radiant furnace for uniform thermal conditions |
Heat Transfer Engineering |
1348 |
2014 |
Narang H. K., Mahapatra M. M., P. K. Jha and Biswas Pankaj |
Optimization and prediction of angular distortion and weldment characteristics of TIG square butt joints |
Journal of Materials Engineering and Performance |
1349 |
2014 |
S. Anbarasu, P. Muthukumar, and S.C. Mishra |
Thermal modeling of Mg2Ni based solid state hydrogen storage reactor |
Heat Transfer Engineering |
1350 |
2014 |
S. S. Gautam and R K Saxena |
A finite element study on effect of frictional heating in the taylor rod impact problem |
World Journal of Engineering |
1351 |
2014 |
S Kirtania, D Chakraborty |
Fracture Behavior of Carbon Nanotube-Based Composites with a Broken Fiber Using Multi-Scale Finite Element Modeling |
Journal of Computational and Theoretical Nanoscience |
1352 |
2014 |
Kadam , P. A., Panda, S. |
Nonlinear analysis of an imperfect radially graded annular plate with a heated edge |
International Journal of Mechanics and Materials in Design |
1353 |
2014 |
T Mane, V Goel, SD Kore |
Finite Element Modelling of Electro-hydraulic Forming of Sheets |
Procedia Materials Science |
1354 |
2014 |
L. Hauchhum, P. Mahanta |
Carbon dioxide adsorption on zeolites and activated carbon by pressure swing adsorption in a fixed bed |
International Journal of Energy and Environmental Engineering |
1355 |
2014 |
Manas Das, V.K. Jain, P.S. Ghoshdastidar |
Estimation of magnetic and rheological properties of MR polishing fluid and their effects on magnetic field assisted finishing process |
Int. J. Precision Technology |
1356 |
2014 |
Lenka Visweswara Rao and S K Kakoty |
Design of compact active magnetic bearing |
International Journal of Applied Sciences and Engineering Research |
1357 |
2014 |
T S Reddy Ganji and S K Kakoty |
Dynamic Characteristics And Stability Of Cylindrical Textured Journal Bearing |
International Journal of Recent advances in Mechanical Engineering |
1358 |
2014 |
Kishor Kumar Gajrani, Sumit Shekhar, M. Ravi Sankar |
Experimental comparative study of Conventional, Micro-Textured and Coated Micro-Textured Tools in Machining |
International Colloquium on Materials, Manufacturing and Metrology (ICMMM-2014) |
1359 |
2014 |
T. Moasunep. Jamir, S. K. Kakoty, Karuna Kalita |
Gas Foil Bearing Analysis And The Effect Of Bump Foil Thickness On Its Performance Characteristics Using A Non-Linear Matrix Equation Solver |
International Journal of Recent advances in Mechanical Engineering |
1360 |
2014 |
Dillip Kumar Biswal, Dibakar Bandopadhya |
An Intelligent Computer-Aided Assembly Process Planning Methodology for Mechanical Parts |
International Journal of Recent Trends in Mechanical Engineering, |
1361 |
2014 |
Deepati Anil Kumar, Tikader Sujoy and Biswas Pankaj |
Experimental Investigation of Mechanical Properties on Friction Stir Welding of Dissimilar Aluminum Alloys |
International Journal of Current Engineering and Technology |
1362 |
2014 |
S. Mahto and U.S. Dixit |
Parametric study of double link flexible manipulator |
Universal Journal of Mechanical Engineering |
1363 |
2014 |
Dibakar Bandopadhya |
A method to solve and study the time delayed vibration characteristics of smart material actuator applying Lambert W-function, International Journal of Recent Trends in Mechanical Engineering, |
International Journal of Recent Trends in Mechanical Engineering, |
1364 |
2014 |
R. Jain, V. Chouhan, D. Bandopadhya |
Design and Development of an Under-actuated Mechanism for Grasping and Grabbing of Objects, |
Journal of Mechatronics and Automation, |
1365 |
2014 |
K.Acharyya, Arun Chattopadhyaya and U.S. Dixit |
Determination of effective shear modulus of graphite/epoxy mixture by an inverse method |
Journal of Materials Forming and Machining Processes-IJMFMP |
1366 |
2014 |
Dillip Kumar Biswal, Dibakar Bandopadhya*, and Santosha Kumar Dwivedy |
Development of an active catheter mechanism using IPMC for invivo inspection, |
Journal of Mechatronics and Automation |
1367 |
2014 |
Jamir T. M., Kakoty S. K. and Kalita K., |
Gas Foil Bearings (GFBs) With Different Bump Foil Materials |
Trends in Machine Design |
1368 |
2014 |
Jagannath Sardar, Dibakar Bandopadhya |
Investigation and Evaluation of Wear Characteristics of A Nonmetallic Spur Gear |
Trends in Machine design |
1369 |
2014 |
Anbarasu S, Muthukumar P and Mishra SC |
Tests on LmNi5 Based Solid-State Hydrogen Storage Container. |
Int. J Science Research |
1370 |
2014 |
Dillip Kumar Biswal, Dibakar Bandopadhya |
Theoretical and Experimental Investigation of Non-linear Vibration Response of an IPMC Actuator Subjected to Alternating Electric Potential |
Journal of Mechatronics and Automation |
1371 |
2013 |
P S Rama Sreekanth, S Kanagaraj |
Assessment of bulk and surface properties of medical grade UHMWPE based nanocomposites using Nanoindentation and microtensile testing |
Journal of the Mechanical Behavior of Biomedical Materials |
1372 |
2013 |
B. Ray, G. Biswas, A. Sharma, and S.W.J. Welch |
CLSVOF method to study consecutive drop impact on liquid pool |
International Journal of Numerical Methods for Heat & Fluid Flow |
1373 |
2013 |
A. Trivedi, D. Srinivasan, D. Sharma, C. Singh |
Evolutionary Multi-objective Day-Ahead Thermal Generation Scheduling in Uncertain Environment |
Power Systems, IEEE |
1374 |
2013 |
Girish O., Reddy N., Jammy S. and Kulkarni V. N |
Conjugate Heat Transfer Analysis for Hypersonic Flow Over Finite Thickness Flat Plate |
Journal of Aerospace Engineering |
1375 |
2013 |
D. Biswal, D. Bandopadhaya and S.K. Dwivedy |
Investigation and evaluation of effect of dehydration on vibration characteristics of silver-electroded ionic polymer–metal composite actuator |
Journal of Intelligent Material Systems and Structures |
1376 |
2013 |
S. Bag |
Recent advances in laser microwelding |
KIRAN: A Bulletin of Indian Laser Association |
1377 |
2013 |
Roy S, and Saha UK |
Review on the Numerical Investigations into the Design and Development of Savonius Wind Rotors |
Renewable and Sustainable Energy Reviews |
1378 |
2013 |
N. Yadaiah and S. Bag |
Role of oxygen as surface active element in linear GTA welding process |
Journal of Materials Engineering and Performance |
1379 |
2013 |
P S Rama Sreekanth, N Ravindra Reddy, Mangala Lahkar, S Kanagaraj |
Biocompatibility studies on MWCNTs reinforced UHMWPE nanocomposites |
Trends in Biomaterials & Artificial Organs |
1380 |
2013 |
P S Rama Sreekanth, S Kanagaraj |
Restricting the ageing degradation of the mechanical properties of gamma irradiated UHMWPE using MWCNTs |
Journal of the Mechanical Behavior of Biomedical Materials |
1381 |
2013 |
U. Barman, A.K. Sen, and S. C. Mishra |
Theoretical and numerical investigations of an electroosmotic flow micropump with interdigitated electrodes |
Microsystem Technologies |
1382 |
2013 |
R. Tiwari, D. J. Bordoloi, S. Bansal and S. Sahoo |
Application of Wavelet Analysis in Multi-class Fault Diagnosis of Gear using SVM |
International Journal of Condition Monitoring & Diagnostic Engineering |
1383 |
2013 |
D. Sharma, A. Trivedi, D. Srinivasan, L. Thillainathan |
Multi-agent modeling for solving profit based unit commitment problem |
Applied soft computing |
1384 |
2013 |
Eswaran M, Virk AS, and Saha UK |
Numerical Simulation of 2-D and 3-D Sloshing Waves in a Regularly and Randomly Excited Container |
Journal of Marine Science and Application |
1385 |
2013 |
D. J. Bordoloi and R. Tiwari |
Optimization of Controller Parameters of Active Magnetic Bearings in Rotor-Bearing Systems. |
Advances in Vibration Engineering |
1386 |
2013 |
Kirtania, S. and Chakraborty, D. |
Fracture behavior of carbon nanotube-based composites with a broken fiber using multi-scale finite element modeling |
Journal of Computational and Theoretical Nanoscience |
1387 |
2013 |
S. Arun, S. Kanagaraj |
Effect of reinforcement and processing methods in PP/MWCNTs nanocomposites |
Advanced Materials Research |
1388 |
2013 |
N.S.Priya, C. Somayaji, S.Kanagaraj |
Oxygen storage capacity of CexZr1-xO2 (0.4?x?0.8) solid solution using thermo-gravimetric analysis |
Advanced Materials Research |
1389 |
2013 |
S. Kapuria, P. Kumari |
Extended Kantorovich method for three-dimensional piezoelasticity solution of edge effects in hybrid plates |
Proceeding of Royal Society A |
1390 |
2013 |
Bibin J. and Kulkarni V. N |
Investigation for energy deposition technique for drag reduction at hypersonic speeds |
Applied Mechanics and Materials |
1391 |
2013 |
DN Basu, ND Patil, S Bhattacharyya and PK Das |
Hydrodynamics of a Natural Circulation Loop in a Scaled-down Steam Drum-Riser-Downcomer Assembly |
Nuclear Engineering and Design |
1392 |
2013 |
C. Patel, Sumitesh Das, R. Ganesh Narayanan |
CAFE modeling, neural network modeling, and experimental investigation of friction stir welding, Proc. of the IMecheE |
Part C: Journal of Mechanical Engineering Science |
1393 |
2013 |
Debnath BK, Saha UK, Sahoo N |
Effect of Compression Ratio and Injection Timing on the Operating Characteristics of a Diesel Engine Run on Palm Oil Methyl Ester |
Proc. of the IMechE, Part–A: Journal of Power and Energy |
1394 |
2013 |
A. Ghosh, N. Barman, H. Chattopadhyay, and S. Bag |
Modelling of heat transfer in submerged arc welding process |
Proceedings of IMechE, Part B: Journal of Engineering Manufacture |
1395 |
2013 |
D. J. Bordoloi and R. Tiwari |
Optimization of Support Vector Machine based Multi-Fault Classification with Evolutionary Algorithms from the Time Domain Vibration Data of Gears. |
Journal of Mechanical Engineering Science |
1396 |
2013 |
Roy S, and Saha UK |
Review of Experimental Investigations into the Design, Performance and Optimization of the Savonius Rotor |
Proc. of the IMechE, Part–A: Journal of Power and Energy |
1397 |
2013 |
N. Naresh Kumar, P. S. Rama Sreekanth, S. Kanagaraj |
Effect of gamma-irradiation on thermal properties of MWCNTs reinforced high density polyethylene |
Advanced Nanomaterials and Nanotechnology |
1398 |
2013 |
B. K. Debnath, U. K. Saha UK and N. Sahoo |
An experimental way of assessing the application potential of emulsified palm biodiesel towards alternative diesel |
Journal of Engineering for Gas Turbines and Power |
1399 |
2013 |
R. Kumar and N. Sahoo |
Dynamic calibration of K-type coaxial thermocouple for transient measurement |
ASME International Journal of Heat Transfer |
1400 |
2013 |
P. Muthukumar, Shyamkumar |
Development of a novel porous radiant burner for LPG cooking applications |
Fuel |
1401 |
2013 |
H. Sarangi, K.S.R.K. Murthy and D. Chakraborty |
Experimental verification of optimal strain gage locations for the accurate determination of mode I stress intensity factors |
Engineering Fracture Mechanics |
1402 |
2013 |
P. Kumari, S Kapuria, RKND Rajapakse |
Three-dimensional extended Kantorovich solution for Levy-type rectangular laminated plates with edge effects |
Composite Structure |
1403 |
2013 |
Likhendra Prasad, Muthukumar P |
Design and optimization of labscale sensible heat storage prototype for solar thermal power plant application |
Solar Energy |
1404 |
2013 |
S. S. Gautam, and R. A. Sauer |
An Energy-momentum-conserving Temporal Discretization Scheme for Adhesive Contact Problems |
International Journal of Numerical Methods in Engineering |
1405 |
2013 |
B. Nayak, S.K. Dwivedy and K.S.R.K. Murthy |
Dynamic stability of magnetorheological elastomer based adaptive sandwich beam with conductive skins using FEM and the harmonic balance method |
International Journal of Mechanical Sciences |
1406 |
2013 |
V. Waghole and R. Tiwari |
Optimization of Needle Roller Bearing Design using Novel Hybrid Methods |
Mechanism and Machine Theory |
1407 |
2013 |
B John, V Kulkarni and G Natarajan |
Shock wave-boundary layer interactions in hypersonic flows |
International Journal of Heat and Mass Transfer |
1408 |
2013 |
B. K. Debnath, N. Sahoo and U. K. Saha |
Adjusting the operating characteristics to improve the performance of an emulsified palm oil methyl ester run diesel engine |
Energy Conversion and Management |
1409 |
2013 |
Bhardwaj, S., Dalal, A. |
Analysis of Natural Convection Heat Transfer and Entropy Generation inside Porous Right-angled Triangular Enclosure |
International Journal of Heat and Mass Transfer |
1410 |
2013 |
Randive, P., Dalal, A. |
Capillarity-induced Resonance of Blobs in a 3-D Duct: Lattice Boltzmann Modelling |
International Journal of Heat and Mass Transfer |
1411 |
2013 |
DN Basu, S Bhattacharyya and PK Das |
Dynamic Response of a Single-phase Rectangular Natural Circulation Loop to Different Excitations of Input Power |
International Journal of Heat and Mass Transfer |
1412 |
2013 |
M. Chandrasekaran, M. Muralidhar and U.S. Dixit |
Online Optimization of Multipass Machining Based on Cloud Computing |
International Journal of Advanced Manufacturing |
1413 |
2013 |
B. K. Debnath, N. Sahoo and U. K. Saha |
Thermodynamic analysis of a variable compression ratio diesel engine running with palm oil methyl ester |
Energy Conversion and Management |
1414 |
2013 |
N. Shanmugapriya, C. Somayaji, S. Kanagaraj |
Optimization of Ceria-Zirconia solid solution based on OSC measurement by cyclic heating process |
Procedia Engineering |
1415 |
2013 |
R.P. Chopade, V. Mohan, R. Mayank, R. Uppaluri and S.C. Mishra |
Simultaneous retrieval of parameters in a transient conduction-radiation problem using differential evolution algorithm |
Numerical Heat Transfer, Part A |
1416 |
2013 |
DN Basu, S Bhattacharyya and PK Das |
Development of a Unified Model for the Steady-state Operation of Single-phase Natural Circulation Loops |
International Journal of Heat and Mass Transfer |
1417 |
2013 |
S.C. Mishra and H. Sahai |
Analyses of non-Fourier conduction and radiation in a cylindrical medium using lattice Boltzmann method and finite volume method |
International Journal of Heat and Mass Transfer |
1418 |
2013 |
P. Kalita, U. K. Saha, P. Mahanta, |
Effect of biomass blending on hydrodynamics and heat transfer behavior in a pressurized circulating fluidized bed unit |
International Journal of Heat and Mass Transfer |
1419 |
2013 |
Sarkar, S., Ganguly, S., Dalal, A. |
Buoyancy Driven Flow and Heat Transfer of Nanofluids Past a Square Cylinder in Vertically Upward Flow |
International Journal of Heat and Mass Transfer |
1420 |
2013 |
L.-M. Armstrong, S.Gu, K.H.Luo, P. Mahanta |
Multifluid Modeling of the Desulfurization Process within a Bubbling Fluidized Bed Coal Gasifier |
AIChE Journal |
1421 |
2013 |
I. Chakraborty, G. Biswas and P.S. Ghoshdastidar |
A coupled level-set and volume-of-fluid method for the buoyant rise of gas bubbles in liquids |
International Journal of Heat and Mass Transfer |
1422 |
2013 |
DN Basu, S Bhattacharyya and PK Das |
Influence of Geometry and Operating Parameters on the Stability Response of Single-phase Natural Circulation Loop |
International Journal of Heat and Mass Transfer |
1423 |
2013 |
A. Sinha, K. A. Raman, H. Chattopadhyay and G. Biswas |
Effects of different orientations of winglet arrays on the performance of plate-fin heat exchangers |
International Journal of Heat and Mass Transfer |
1424 |
2013 |
N. Yadaiah and S. Bag |
Effect of heat source parameters in thermal and mechanical analysis of linear GTA welding process |
ISIJ International |
1425 |
2013 |
Roy S, and Saha UK |
Computational Study to Assess the Influence of Overlap Ratio on Static Torque Characteristics of a Vertical Axis Wind Turbine |
Procedia Engineering |
1426 |
2013 |
Konwar R. S., Kalita K., Banerjee A., and Khoo W. K. S. |
Electromagnetic Analysis of a bridge con-figured winding cage induction machine using finite element method |
Progress in Electromagnetics Research B |
1427 |
2013 |
Mukesh Kumar, Satish V. Kailas, R. Ganesh Narayanan |
Influence of external weld flash on the in-plane plane-strain formability of friction stir welded sheets |
Journal of Strain Analysis for Engineering Design |
1428 |
2013 |
P. Janaki Ramulu, R. Ganesh Narayanan |
Experimental evaluation and prediction of forming limit of FSW blanks made of AA 6061 T6 sheets at different weld orientations and weld locations |
Materialwissenschaft und Werkstofftechnik |
1429 |
2013 |
Sarkar, S., Ganguly, S., Dalal, A., Saha, P., Chakraborty, S. |
Mixed Convective Flow Stability of Nanofluids past a Square Cylinder by Dynamic Mode Decomposition |
International Journal of Heat and Fluid Flow (in press) |
1430 |
2013 |
P. Kalita, U. K. Saha, P. Mahanta |
Parametric study on the hydrodynamics and heat transfer along the riser of a pressurized circulating fluidized bed unit |
Experimental Thermal and Fluid Science |
1431 |
2013 |
Peetala R. K., Sahoo N. and Kulkarni V. N. |
Prediction of short duration transient surface heat flux using various analytical techniques |
Heat transfer – Asian Research |
1432 |
2013 |
Mohit Lal and R. Tiwari |
Quantification of Multiple Fault Parameters in Flexible Turbo-Generator Systems with Incomplete Rundown Data. |
Mechanical Systems and Signal Processing |
1433 |
2013 |
S. Bansal, S. Sahoo, and R. Tiwari and D. J. Bordoloi |
Multiclass Fault Diagnosis in Gears Using Support Vector Machine Algorithms Based on Frequency Domain Data. |
Measurement |
1434 |
2013 |
Muthukumar P, Satheesh A |
Analysis of crossed vant Hoff metal hydride based heat pump |
Int. J. Hydrogen Energy |
1435 |
2013 |
A. Bhowmik, R. Singh, R. Repaka, S.C. Mishra |
Conventional and newly developed bioheat transport models in vascularized tissues: A review |
Journal of Thermal Biology |
1436 |
2013 |
K. Das and S.C. Mishra |
Estimation of tumor characteristics in a breast tissue with known skin surface temperature |
Journal of Thermal Biology |
1437 |
2013 |
Karthick Selvam, Muthukumar P, Linder M, Mertz R, Kulenovic R |
Measurement of thermochemical properties of some metal hydrides - titanium (Ti), misch metal (Mm) and lanthanum (La) based alloys |
Int. J. Hydrogen Energy |
1438 |
2013 |
K. Das, R. Singh and S.C. Mishra |
Numerical analysis for determination of the presence of a tumor and estimation of its size and location in a tissue |
Journal of Thermal Biology |
1439 |
2013 |
Satya Sekhar B, Muthukumar P and Suresh P |
Performance investigations of the metal hydride based hydrogen storage devices |
Int J Hydrogen Energy |
1440 |
2013 |
Satya Sekhar B, Muthukumar P |
Performance tests on a double-stage metal hydride based heat transformer |
Int. J. Hydrogen Energy |
1441 |
2013 |
Satya Sekhar B, Muthukumar P |
Studies on metal hydride based single-stage heat transformer |
Int. J. Hydrogen Energy |
1442 |
2013 |
D. A. Perumal, A. K. Dass |
Application of Lattice Boltzmann method for incompressible viscous flows |
Applied Mathematical Modelling |
1443 |
2013 |
Satyajit Panda and Gavhane G. Sopan |
Nonlinear analysis of smart functionally graded annular sector plates using cylindrically orthotropic piezoelectric fiber reinforced composite |
International Journal of Mechanics and Materials in Design |
1444 |
2013 |
H. K. Mohanty, M. M. Mahapatra, P. Kumar, Biswas P. and N. R. Mandal. |
Predicting the effects of tool geometries on friction stirred aluminum welds using artificial neural networks and fuzzy logic techniques |
International Journal of Manufacturing Research (IJMR) |
1445 |
2013 |
V. Yadav, J. Thakuria, A.K. Singh and U.S. Dixit |
An approximate fast finite element analysis of temperature distribution in rolling |
Int. J. Mechatronics and Manufacturing Systems |
1446 |
2013 |
Kant R. and Joshi S.N. |
Finite Element Simulation of Laser Assisted Bending with Moving Mechanical Load |
International Journal of Mechatronics and Manufacturing Systems (Inderscience) |
1447 |
2013 |
M. Baruah and S. Bag |
Numerical modelling of heat transfer and fluid flow in laser microwelding |
International Journal of Mechatronics and Manufacturing Systems |
1448 |
2013 |
Kalita P., Clifford M., Kalita K., Saha U. K., and Mahanta P. |
Characterization and analysis of thermal response of rice husk for gasification applications |
Journal of Renewable and Sustainable Energy |
1449 |
2013 |
A. Mishra and U.S. Dixit |
Determination of thermal diffusivity of the material, absorptivity of the material and laser beam radius during laser forming by inverse heat transfer |
Journal of Machining and Forming Technologies |
1450 |
2013 |
Ghatule P., Kore S. D. |
Coupled 3D Finite Element Modeling of Electromagnetic Free Expansion of Al Tube |
Internaional Journal of Advanced Materials Manufacturing and Characterisation |
1451 |
2013 |
Bora BJ, Debnath BK, Gupta N, Saha UK, and Sahoo N |
Investigation on the Flow Behaviour of a Venture Type Gas Mixer for Dual Fuel Diesel Engines |
International Journal of Emerging Technology and Advanced Engineering |
1452 |
2013 |
B. J. Bora, B. K. Debnath, N. Gupta, N. Sahoo and U. K. Saha |
Investigation on the flow behaviour of a venturi type gas mixer designed for dual fuel diesel engines |
International Journal of Engineering Technology and Advanced Engineering |
1453 |
2013 |
S Samanta and DN Basu |
Modeling of a Solar Assisted Water-LiBr Absorption Refrigeration System for Summer Airconditioning of an Office Room |
International Journal of Emerging Technology and Advanced Engineering |
1454 |
2013 |
S. P. Rajagopal, V. Ganesh, A.V. Lanjewar, M. Ravi Sankar, P. Gupta, D. Soren |
Past and Current Status of Hybrid Electric Discharge Machining (H-EDM) Processes |
International Journal of Advanced Materials Manufacturing and Characterization |
1455 |
2013 |
N.K. Mishra, P. Muthukumar, S.C. Mishra |
Performance tests on medium-scale porous radiant burners for LPG cooking applications |
International Journal of Emerging Technology and Advanced Engineering |
1456 |
2013 |
D. Soren, P. Gupta, M. Ravi Sankar, S. P. Rajagopal, V. Ganesh, A.V. Lanjewar |
Tribomechanical and Tribochemical Wear of Human Dental Enamel |
International Journal of Advanced Materials Manufacturing and Characterization |
1457 |
2013 |
D. Bandopadhya |
A Lambert W Function Approach for Solution of Delay Response of an Active Actuator via Pseudo-Rigid Body Modeling Technique |
International Journal of Research in Mathematics |
1458 |
2012 |
G. Biswas, H. Chattopadhyay and A. Sinha |
Augmentation of Heat Transfer by Creation of Streamwise Longitudinal Vortices using Vortex Generators |
Heat Transfer Engineering |
1459 |
2012 |
Sanjib Banerjee1, P. S. Robi1, and A. Srinivasan |
Calorimetric study of precipitation kinetics of al–cu–mg and al–cu–mg–0.06 wt.% sn alloys |
Metals and Materials International |
1460 |
2012 |
S Bhattacharyya, DN Basu and PK Das |
Two-phase Natural Circulation Loops: A Review of the Recent Advances |
Heat Transfer Engineering |
1461 |
2012 |
B. Ray, P.D.S. Reddy, D. Bandyopadhyay, S.W. Joo, A. Sharma, S. Qian and G. Biswas |
Instabilities in Free-surface Electroosmotic Flows |
Theory of Computational Fluid Dynamics |
1462 |
2012 |
B. Ray, P.D.S. Reddy, D. Bandyopadhyay, A. Sharma, S. Qian and G. Biswas |
Surface Instability of a Thin Electrolyte Film Undergoing Coupled Electroosmotic and Electrophoretic Flows in a Microfluidic Channel |
Electrophoresis |
1463 |
2012 |
D. K. Biswal, D. Bandopadhya , and S. K. Dwivedy |
Fabrication and thermo mechanical analysis of pure silver-electrode ionic polymer-metal composite (IPMC) actuator |
Applied Mechanics and Materials |
1464 |
2012 |
S.S. Mohapatra, P. Mahanta |
Performance evaluation of quality drying in a natural convection grain dryer |
Applied Mechanics and Materials |
1465 |
2012 |
S. Ganguly, A. Garg, A. Pasricha and S. K. Dwivedy |
Control of pneumatic artificial muscle system through experimental Modelling |
Mechatronics |
1466 |
2012 |
Ganesh, N. and Balakrishnan, N. |
A h--adaptive algorithm using residual error estimates for fluid flows |
Communications in Computational Physics |
1467 |
2012 |
Kalita P, Saha UK, and Mahanta P |
An Experimental Investigation of Hydrodynamics and Heat Transfer Characteristics of Biomass in a Pressurized Circulating Fluidized Bed |
International Energy Journal |
1468 |
2012 |
R. Tiwari, K. Sunil Kumar and R. S. Reddy |
An Optimum Design Methodology of Tapered Roller Bearing Using Genetic Algorithms. |
International Journal for Computational Methods in Engineering Science and Mechanics |
1469 |
2012 |
D. K. Biswal, D. Bandopadhya , and S. K. Dwivedy |
Preparation and experimental investigation of thermo-electro-mechanical behavior of Ag-IPMC Actuator |
International Journal of Precision Engineering and Manufacturing |
1470 |
2012 |
H. K. Mohanty, M. M. Mahapatra, Biswas Pankaj and Mandal N. R. |
Effect of tool shoulder and pin probe profiles on friction stirred aluminum welds–A comparative study |
Journal of Marine Science Application |
1471 |
2012 |
J.K. Doley, S.D. Kore |
Fully Coupled Numerical Simulation of Electromagnetic Forming |
Key Engineering Materials |
1472 |
2012 |
S.D. Kore, P.N. Vinod, S. Kumar, M. R. Kulkarni |
Study of Wavy Interface in Electromagnetic Welds |
Key Engineering Materials |
1473 |
2012 |
Deep Sharma and S. K. Dwivedy |
Design and Fabrication of an Autonomous Mobile Robot for Obstacle Avoidance and Path Planning in partially known Environment |
Advanced Material Research |
1474 |
2012 |
Susanta Kumar Dey, R. Ganesh Narayanan, G. Saravana Kumar |
Prediction of tensile behavior of DP 590 Steel Tailor Welded Blanks by ANN |
Advanced Materials Research |
1475 |
2012 |
S. Mahto and U.S. Dixit |
Comparative Dynamic Response of an Optimized Single Link Flexible manipulator |
Applied Mechanics and Materials |
1476 |
2012 |
M. Ravi Sankar, V. K. Jain, and J. Ramkumar |
Effect of Abrasive Medium ingredients on finishing of Al alloy and Al alloy/SiC Metal Matrix Composites using Rotational Abrasive Flow Finishing |
Applied Mechanics and Materials |
1477 |
2012 |
H. Sarangi, K.S.R.K. Murthy and D. Chakraborty |
Extent of three Parameter Zone and Optimum Strain Gage Location for Eccentric Cracked Configurations |
Applied Mechanics and Materials |
1478 |
2012 |
Chakraborty.D., Rathore, P. K. and Roy T. |
Optimal Actuators Locations in Smart Fibre Reinforced Polymer Structures Using Genetic Algorithm |
Applied Mechanics and Materials |
1479 |
2012 |
Narendra Singh, Gaurav Chand, S. Kanagaraj |
Investigation of thermal conductivity and viscosity of carbon nanotubes-Ethylene glycol nanofluids |
Heat Transfer Engineering |
1480 |
2012 |
S. Khandekar,M. Ravi Sankar, V. Agnihotri, J. Ramkumar |
Nano cutting fluid for enhancement of meal cutting performance |
Materials and Manufacturing Processes |
1481 |
2012 |
Susanta Kumar Dey, R. Ganesh Narayanan, G. Saravana Kumar |
Computing the tensile behavior of tailor welded blanks made of DP steel by neural network based expert system |
International Journal of Computer Integrated Manufacturing |
1482 |
2012 |
B. Ray, G. Biswas and A. Sharma |
Bubble pinch-off and scaling during liquid drop impact on liquid pool |
Physics of Fluids |
1483 |
2012 |
S. Bag |
Adverse effect of surface active element transport in conduction mode laser welding process |
KIRAN: A Bulletin of Indian Laser Association |
1484 |
2012 |
S. S. Gautam, and P. M. Dixit |
Numerical Simulation of Ductile Fracture in Cylindrical Tube Impacted Against a Rigid Surface |
International Journal of Damage Mechanics |
1485 |
2012 |
A. Banerjee |
Simulation of SMA wire actuator behavior under arbitrary thermo-mechanical Loading |
Smart Materials and Structures |
1486 |
2012 |
A. N. Reddy and G. K. Ananthasuresh |
A numerical approach to determine the sufficiency of given boundary data sets for uniquely estimating interior elastic properties |
Inverse Problems in Science and Engineering |
1487 |
2012 |
Abhishek T. Dhumal, R. Ganesh Narayanan, G. Saravana Kumar |
Simulation based expert system to predict the tensile and deep drawing behavior of tailor welded blanks |
International Journal of Modeling, Identification and Control |
1488 |
2012 |
C. Patel, R. Ganesh Narayanan, Sumitesh Das |
Predicting the grain size and strength during friction stir welding by Cellular automata based finite element (CAFE) analysis |
International Journal of Advanced Manufacturing Systems |
1489 |
2012 |
Jagu S. Rao and R. Tiwari |
Optimum Design and Analysis of Axial Hybrid Magnetic Bearings Using Multi-Objective Genetic Algorithms. |
International Journal for Computational Methods in Engineering Science and Mechanics |
1490 |
2012 |
Satya Sekhar B, Muthukumar P |
Performance Analysis of a Metal Hydride Based Heat Transformer |
Int Energy Journal |
1491 |
2012 |
H. K. Mohanty, M. M. Mahapatra, Biswas P. and N. R. Mandal |
Modeling the Effects of Tool Shoulder and Probe Profile Geometries on Friction Stirred Aluminum Welds Using Response Surface Methodology |
J. Marine Sci. Appl. |
1492 |
2012 |
B. B. Sahoo, U. K. Saha U.K. and N. Sahoo |
Diagnosing the effects of pilot fuel quality on availability terms in a biogas run dual fuel diesel engine |
International Journal of Exergy |
1493 |
2012 |
D. A. Perumal, G. V. S. Kumar, A. K. Dass |
Numerical Simulation of Viscous Flow over a Square Cylinder Using Lattice Boltzmann Method |
ISRN Mathematical Physics |
1494 |
2012 |
Rajiv Sharma, S Kanagaraj |
Prepation and characterization of surfactant coated Ce-Zr nanoparticles and nanofuel |
Journal of ASTM International (ASTM Special Technical Publication) |
1495 |
2012 |
Saptarshi Mandal, S Kanagaraj |
Reduction of emission in a diesel engine using nanofuel - Ceria nanoparticle dispersed diesel |
Journal of ASTM International, (ASTM Special Technical Publication) |
1496 |
2012 |
P.S. Robi, Sanjib Banerjee1 and A. Srinivasan |
Deformation Mechanism Maps for Al-Cu-Mg alloys microalloyed with Tin |
Advanced Materials Research |
1497 |
2012 |
P S Rama Sreekanth, N Naresh Kumar, S Kanagaraj |
Effect of MWCNT on mechanical properties of g -irradiated UHMWPE during shelf ageing process |
Advanced Materials Research |
1498 |
2012 |
P. Janaki Ramulu, R. Ganesh Narayanan, Satish V. Kailas, Jayachandra Reddy |
Formability evaluation of FSW blanks made of aluminum sheet: Influence of welding speed and tool rotation speed |
Advanced Materials Research |
1499 |
2012 |
S. K. Dwivedy and B. Pratiher |
Reply to the "Comments on Parametric instability of a cantilever beam with magnetic field and periodic axial load |
Journal of Sound and Vibration |
1500 |
2012 |
Sura J., Menezes V., Kirthyvasan A. and Kulkarni V. N |
Estimation of skin friction drag on a model in hypersonic shock tunnel |
Applied Mechanics and Materials |
1501 |
2012 |
B. K. Debnath, U. K. Saha and N. Sahoo |
Effect of compression ratio and injection timing on the performance characteristics of a diesel engine running on palm oil methyl ester, Journal of Power and Energy |
Proceedings of the Institution of Mechanical Engineers (IMechE, Part A) |
1502 |
2012 |
Perumalla Janaki Ramulu, Satish V. Kailas, R. Ganesh Narayanan |
Influence of tool rotation speed and feed rate on forming limit of friction stir welded AA6061-T6 sheets |
Proc. of the IMecheE, Part C: Journal of Mechanical Engineering Science |
1503 |
2012 |
B. Nayak, S. K. Dwivedy and K.S.R.K Murthy |
Vibration analysis of a three-layer MRE embedded sandwich beam with conductive skins using FEM, Proceedings of the Institution of Mechanical Engineers |
Part C, Journal of Mechanical Engineering Science |
1504 |
2012 |
B. Nayak, S.K. Dwivedy and K.S.R.K. Murthy |
Vibration analysis of a three-layer MRE embedded sandwich beam with conductive skins using finite element method |
Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science |
1505 |
2012 |
Manas Das, V.K. Jain, P.S Ghoshdastidar |
CFD simulation and experimental investigations into magnetic field assisted nano-finishing process |
Proc. IMechE Part B: J Engineering Manufacture |
1506 |
2012 |
D. Biswal, D. Bandopadhaya and S.K. Dwivedy |
Electro-Mechanical and Thermal Characteristics of Silver-Electroded Ionic Polymer Metal Composite (IPMC) Actuator |
Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science |
1507 |
2012 |
Biswas P., Kumar D. A. and Mandal N. R. |
Friction stir welding of aluminum alloy with varying tool geometry and process parameters |
Proc. IMechE Part-B, J. Engineering Manufacture |
1508 |
2012 |
L. Boriwal, M. M. Mahapatra, and P. Biswas |
Modelling and optimizing the effects of process parameters on galvanized steel sheet resistance spot welds |
Proc. IMechE Part B: J. Engineering Manufacture |
1509 |
2012 |
V. K. Jain, Ajay Sidpara, M. Ravi Sankar, Manas Das |
Nanofinishing Techniques: A Review, Proceedings of the Institution of Mechanical Engineers |
Part C: Journal of Mechanical Engineering Science |
1510 |
2012 |
H. K. Mohanty, M. M. Mahapatra, P. Kumar, Biswas Pankaj and N R Mandal |
Study on the effect of tool profiles on temperature distribution and material flow characteristics in friction stir welding |
Proc. IMechE Part-B, J. Engineering Manufacture |
1511 |
2012 |
Satyajit Panda and M. C. Ray |
Active damping of nonlinear vibrations of functionally graded laminated composite plates using vertically/obliquely reinforced 1-3 piezoelectric composite |
Journal of Vibration and Acoustics |
1512 |
2012 |
Sarkar, S., Ganguly, S., Dalal, A. |
Analysis of Entropy Generation during Mixed Convective Heat Transfer of Nanofluids past a Square Cylinder in Parallel Flow |
ASME Journal of Heat Transfer |
1513 |
2012 |
S.C. Mishra and R.R. Vernekar |
Analysis of transport of collimated radiation in a participating media using the lattice Boltzmann method |
Journal of Quantitative Spectroscopy and Radiative Transfer |
1514 |
2012 |
B. K. Debnath, U. K. Saha and N. Sahoo |
Effect of hydrogen-diesel quantity variation on brake thermal efficiency of a dual fuelled diesel engine |
Journal of Power Technologies |
1515 |
2012 |
H. Sarangi, K.S.R.K. Murthy and D. Chakraborty |
Optimum strain gage locations for accurate determination of the mixed mode stress intensity factors |
Engineering Fracture Mechanics |
1516 |
2012 |
S. Kapuria, P. Kumari |
Multi-term extended Kantorovich method for three dimensional elasticity solution of laminated plates |
Journal of Applied Mechanics (ASME) |
1517 |
2012 |
P S Rama Sreekanth, N Naresh Kumar, S Kanagaraj |
Improving post irradiation stability of high density polyethylene by multi walled carbon nanotubes |
Composites Science and Technology |
1518 |
2012 |
P. Janaki Ramulu, R. Ganesh Narayanan, Satish V. Kailas, Jayachandra Reddy |
Internal defect and process parameter analysis during friction stir welding of Al 6061 sheets |
International Journal of Advanced Manufacturing Technology |
1519 |
2012 |
Madhusudhana Gavara |
Asymmetric forced convection of nanofluids in a channel with symmetrically mounted rib heaters on opposite walls |
Numerical Heat Transfer, Part A |
1520 |
2012 |
Manas Das, V.K. Jain, P.S Ghoshdastidar |
Nanofinishing of flat workpieces using Rotational - Magnetorheological Abrasive Flow Finishing (R-MRAFF) Process |
International Journal of Advanced Manufacturing Technology |
1521 |
2012 |
Madhusudhana Gavara |
Natural convection in a series of thermally interacting cavities with wall mounted heaters |
Numerical Heat Transfer, Part A |
1522 |
2012 |
Madhusudhana Gavara |
Natural convection in a vertical channel with arrays of flush-mounted heaters on opposite conductive walls |
Numerical Heat Transfer, Part A |
1523 |
2012 |
A Pal, D. Bandyopadhyay, G. Biswas and V. Eswaran |
Enhancement of Heat Transfer Using Delta-Winglet Type Vortex Generators with a Common Flow Up Arrangement |
Numerical Heat Transfer Part A |
1524 |
2012 |
D. Chatterjee, G. Biswas and S. Amiroudine |
Mixed Convection Heat Transfer from an In-line Row of Square Cylinders in Cross-Flow at Low Reynolds Number |
Numerical Heat Transfer Part A |
1525 |
2012 |
David Santosh Christopher , P. Rajesh Kanna, G. Madhusudhana, P. Venkumar, H. A. Mohammed |
Numerical Investigation of Heat Transfer from Two-Dimensional Sudden Expansion Flow using Nanofluids |
Numerical Heat Transfer, Part A |
1526 |
2012 |
Ravindra S. Saluja, R. Ganesh Narayanan, Sumitesh Das |
Cellular automata finite element (CAFE) model to predict the forming of friction stir welded blanks |
Computational Materials Science |
1527 |
2012 |
DN Basu, S Bhattacharyya and PK Das |
Performance Comparison of Rectangular and Toroidal Natural Circulation Loops under Steady and Transient Conditions |
International Journal of Thermal Sciences |
1528 |
2012 |
S. Bag, D. V. Kiran, Arshad A. Syed and A. De |
Efficient estimation of volumetric heat source in fusion welding process simulation |
Welding in the World |
1529 |
2012 |
S.C. Mishra and H. Sahai |
Analyses of non-Fourier heat conduction in 1-D cylindrical and spherical geometry - an application of the lattice Boltzmann method |
International Journal of Heat and Mass Transfer |
1530 |
2012 |
S.C. Mishra, R. Muthukumaran, S. Maruyama |
Comparison of the thermal effects of the transport of a short-pulse laser and a multi-pulse laser through a participating medium |
International Journal of Heat and Mass Transfer |
1531 |
2012 |
R. Kumar, N. Sahoo and V. Kulkarni |
Conduction based calibration of handmade platinum thin film heat transfer gauges for transient measurements |
International Journal of Heat and Mass Transfer |
1532 |
2012 |
R.P. Chopade, S.C. Mishra, P. Mahanta, S. Maruyama |
Estimation of power of heaters in a radiant furnace for uniform thermal conditions on 3-D irregular shaped objects |
International Journal of Heat and Mass Transfer |
1533 |
2012 |
Bhinder, A. P. S., Sarkar, S., Dalal, A. |
Flow over and Forced Convection Heat Transfer around a Semi-circular Cylinder at Incidence |
International Journal of Heat and Mass Transfer |
1534 |
2012 |
Madhusudhana Gavara, Pradip Dutta, K.N. Seetharamu |
Mixed convection adjacent to non-isothermal vertical surfaces |
International Journal of Heat and Mass Transfer |
1535 |
2012 |
S. Sarkar, S. Ganguly and G. Biswas, |
Mixed Convective Heat Transfer of Nanofluids Past a Circular Cylinder in Cross Flow in Unsteady Regime |
International Journal of Heat and Mass Transfer |
1536 |
2012 |
S.C. Mishra, M.Y. Kim and S. Maruyama |
Performance evaluation of four radiative transfer methods in solving multi-dimensional radiation and/or conduction heat transfer problems |
International Journal of Heat and Mass Transfer |
1537 |
2012 |
M. Lal and R. Tiwari |
Multi-fault Identification in Simple Rotor-Bearing-Coupling Systems based on Forced Response Measurements. |
Mechanism and Machine Theory |
1538 |
2012 |
S. Ghosh, A.K. Das, A.A. Vaidya, S.C. Mishra and P.K. Das |
Numerical study of dynamics of bubbles using lattice Boltzmann method |
Industrial & Engineering Chemistry Research |
1539 |
2012 |
R. P. Chopade, S.C. Mishra, P. Mahanta, S. Maruyama, and A. Komiya |
Uniform thermal conditions on 3-D object: Optimal power estimation of panel heaters in a 3-D radiant enclosure |
International Journal of Thermal Sciences |
1540 |
2012 |
B. B. Sahoo, N. Sahoo and U. K. Saha |
Effect of H2:CO ratio in syngas on the performance of a dual fuel diesel engine operation |
Applied Thermal Engineering |
1541 |
2012 |
Sharma A., Ranavat V. S., Kulkarni V. N and Saha U. K. |
Numerical investigations on flow control over a blended wind body transonic aircraft |
Journal of Aircrafts |
1542 |
2012 |
Sharma AS, Rawat VS, Kulkarni VN, and Saha UK |
Numerical Investigations on Flow Control Over a Blended Wing Body Transonic Aircraft Using Synthetic Jet Actuator Arrays |
AIAA Journal of Aircraft |
1543 |
2012 |
S.R. Deepak and G. Ananthasuresh |
Static balancing of a four-bar linkage and its cognates |
Mechanism and Machine Theory |
1544 |
2012 |
B. Nayak, S.K. Dwivedy and K.S.R.K. Murthy |
Multi-frequency excitation of magnetorheological elastomer-based sandwich beam with conductive skins |
International Journal of Non-linear Mechanics |
1545 |
2012 |
Sanjib Banerjee, P.S. Robi and A. Srinivasan |
Prediction of Hot Deformation Behavior of Al–5.9%Cu–0.5%Mg Alloys with Trace Additions of Sn |
Journal of Material Science |
1546 |
2012 |
D. Sharma, K. Deb and N. N. Kishore |
Customized Evolutionary Optimization Procedure for Generating Minimum Weight Compliant Mechanisms |
Engineering Optimization |
1547 |
2012 |
S. Banerjee, P. S. Robi and A. Srinivasan |
Deformation Processing Maps for Control of Microstructure in Al-Cu-Mg Alloys Microalloyed with Sn |
Metallurgical and Materials Transactions A |
1548 |
2012 |
P. Janaki Ramulu, R. Ganesh Narayanan |
Weld zone representation methods during the stretching of friction stir welded blanks with dissimilar sheet thickness: A study using numerical simulations |
Materialwissenschaft und Werkstofftechnik |
1549 |
2012 |
DN Basu, ND Patil, S Bhattacharyya and PK Das |
Experimental Investigations of Droplet Carryover from the Separator Drum of an Air-lift Loop Simulating a Scaled-down AHWR |
Experimental Thermal and Fluid Sciences |
1550 |
2012 |
Ravi Kant, R. Ganesh Narayanan |
In-plane testing behavior of adhesive-bonded steel sheets: Influence of sheet surface roughness adhesive thickness, and bonding width |
Journal of Testing and Evaluation |
1551 |
2012 |
Madhusudhana Gavara, P. Rajesh Kanna |
Study of conjugate natural convection between vertical coaxial rectangular cylinders |
International Communications in Heat and Mass Transfer |
1552 |
2012 |
Muthukumar P, Patel KS, Sachan P, Singhal N |
Computational study on metal hydride based three-stage hydrogen compressor |
International Journal of Hydrogen Energy |
1553 |
2012 |
Sekhar BS, Muthukumar P, Saikia R |
Tests on a metal hydride based thermal energy storage system |
International Journal of Hydrogen Energy |
1554 |
2012 |
Muthukumar P, Singhal A, Bansal GK. |
Thermal modeling and performance analysis of industrial-scale metal hydride based hydrogen storage container |
International Journal of Hydrogen Energy |
1555 |
2012 |
S. Kapuria, P. Kumari |
Boundary layer effects in Levy-type rectangular piezoelectric composite plates using a coupled efficient layerwise theory |
European Journal of Mechanics A |
1556 |
2012 |
S. K. Singh and R. Tiwari |
Detection and Localisation of Multiple Cracks in a Stepped Shaft. |
Fatigue and Fracture of Engineering Materials and Structures |
1557 |
2012 |
C. Shravan and R. Tiwari |
Identification of Stiffness and Periodic Breathing Forces of A Transverse Switching Crack in a Laval Rotor. |
Fatigue and Fracture of Engineering Materials and Structures |
1558 |
2012 |
B.Buragohain, P.Mahanta, V.S. Moholkar |
Performance correlations for biomass gasifiers using semi-equilibrium non-stoichiometric thermodynamic models |
International Journal of Energy Research |
1559 |
2012 |
Kirtania, S. and Chakraborty, D. |
Multi-scale modeling of carbon nanotube reinforced composites with a fiber break |
Materials and Design |
1560 |
2012 |
Hegde G. M., Kulkarni V. N,. Nagabhoopathy and Reddy K.P.J |
Structure and morphology studies of chromium film at elevated temperature in hypersonic environment |
Bulletin of Material Science |
1561 |
2012 |
B. Ray, G. Biswas and A. Sharma |
Oblique Drop Impact on Deep and Shallow Liquid |
Commun. Comput. Phys. |
1562 |
2012 |
Sahoo BB, Saha UK, and Sahoo N |
Diagnosing the Effects of Pilot Fuel Quality on Exergy Terms in a Biogas Run Dual Fuel Diesel Engine |
International Journal of Exergy |
1563 |
2012 |
Biswas Pankaj, Mandal N. R. and Sha O.P. |
Numerical and dimensional analysis for prediction of line heating residual deformations |
Journal of Marine Science and Application |
1564 |
2012 |
David Santosh Christopher, G. R. Madhusudhana, P. Venkumar, P. Rajesh Kanna, H. A. Mohammed |
Numerical investigation on laminar flow due to sudden expansion using nanofluids |
Journal of Computational and Theoretical Nanoscience |
1565 |
2012 |
D.S. Kumar, A.K. Dass and A. Dewan |
Multiple Stable Solutions for Two- and Four-Sided Lid-Driven Cavity Flows Using FAS Multigrid Method |
Engineering e-Transaction |
1566 |
2012 |
S. Ghosh, P. Patil, S.C. Mishra, A.K. Das and P.K. Das |
3-D lattice Boltzmann model for asymmetric Taylor bubble and Taylor drop in an inclined channel |
Engineering Applications of Computational Fluid Mechanics |
1567 |
2012 |
M. Hazarika, U.S. Dixit, S. Deb |
A method for fine tuning the membership grades assigned by experts: an application to burr height estimation in drilling |
Journal of Manufacturing Technology Research, Journal of Manufacturing Technology Research |
1568 |
2012 |
S. S. Gautam, and R. K. Saxena |
A Numerical Study of Strain Rate and Temperature in Taylor Rod Impact Problem |
International Journal of Structural Changes in Solids |
1569 |
2012 |
R. Das, U.S. Dixit and S. Deb |
An experimental study on the effect of lubrication, die land length and vibration in multi-hole extrusion process |
Journal of Machining and Forming Technologies |
1570 |
2012 |
M. Ravi Sankar, V. K. Jain, J. Ramkumar, Y. M. Joshi |
Dependence of R-AFF process on Rheological Characteristics of Soft styrene based organic polymer abrasive medium |
International Journal of Manufacturing Technology Research |
1571 |
2012 |
R. Das, U.S. Dixit, S. Deb |
Effect of extrusion ratio, die land length and lubrication on hardness and surface roughness in multi-hole extrusion |
Journal of Manufacturing Technology Research |
1572 |
2012 |
D. A. Perumal, G. V. S. Kumar, A. K. Dass |
Lattice Boltzmann Simulation of Viscous flow past elliptical cylinder |
CFD letters |
1573 |
2012 |
S.R. Deepak and G. K. Ananthasuresh |
Perfect static balance of linkages by addition of springs but not auxiliary bodies |
Journal of Mechanisms and Robotics |
1574 |
2012 |
Muthukumar P, Lakshmi DVN |
Thermodynamic analysis of a thermally operated cascade sorption heat pump for continuous cold generation |
International Journal of Energy and Environment |
1575 |
2012 |
R. Kumar, P. Jayesh and N. Sahoo |
Analysis of one dimensional inverse heat conduction problem: A Review |
International Journal of Mechanical & Industrial Engineering |
1576 |
2012 |
B. B. Sahoo U.K. Saha and N. Sahoo |
Demonstration of dual fuel technology – Gas and diesel for the future |
International Journal of Engineering Science Research |
1577 |
2012 |
V.K. Jain, Vinod Kumar,M. Ravi Sankar |
Experimental study and Empirical Modeling of Magnetic Abrasive Finishing on Ferromagnetic and Non-Ferromagnetic Materials |
International Journal of Precision Technology |
1578 |
2012 |
M. Sivasankar, K. Siva Sankar Reddy, T. Benarjee, S. K. Dwivedy, D. Chakraborty |
Wear Analysis of Ace tabular Cup for Daily Activities |
Indian Journal of Biomechanics |
1579 |
2012 |
M. Sivasankar, K. Siva Sankar Reddy, T. Benarjee, S. K. Dwivedy, D. Chakraborty |
Wear Analysis of Acetabular Cup for Daily Activities |
Indian Journal of Biomechanics |
1580 |
2012 |
Mazumdar A., Talukdar S., and Kalita K. |
Comparative Analysis of an Elastic 2 Degree of Freedom Vehicle Ride Model with a Rigid 2 Degree of Freedom Model |
International Journal of Research in Engineering and Technology |
1581 |
2012 |
ARIJIT Biswas&P. Mahanta |
Design and experimental analysis of condenser for the production of bamboo vinegar |
International Journal of Applied Research in Mechanical Engineering |
1582 |
2012 |
R. Kumar and N. Sahoo |
Design, fabrication and sensitivity analysis of the resistance temperature detector thin film sensors |
International Journal of Mechanical and Industrial Engineering |
1583 |
2012 |
J. K. Doley, S.D. Kore |
Studies on Temperature Distribution in Electromagnetic Welding Process |
ASTM |
1584 |
2011 |
S. K. Laha and S. K. Kakoty |
Non-linear dynamic analysis of a flexible rotor supported on porous oil journal bearing |
Communications in Nonlinear Science and Numerical Simulation |
1585 |
2011 |
Lamas BC, Fonseca MAL, Goncalves FAMM, Ferreira AGM, Fonseca IMA, Kanagaraj S, Martins N, Oliveira MSA |
EG/CNTs nanofluids engineering and thermal characterization |
Journal of Nano Research |
1586 |
2011 |
R. Das, S.C. Mishra, T.B.P Kumar and R. Uppaluri |
An inverse analysis for parameter estimation applied to a non-Fourier conduction-radiation problem |
Heat Transfer Engineering |
1587 |
2011 |
A.F. Di Rienzo, P. Asinari, R. Borchiellini and S.C. Mishra |
Improved angular discretization and error analysis of the lattice Boltzmann method for solving radiative heat transfer in a participating medium |
International Journal of Numerical Methods for Heat and Fluid Flow |
1588 |
2011 |
Sukhomay Pal, P. Stephan Heyns, Burkhard H. Freyer, Nico J. Theron and Surjya K. Pal |
Tool wear monitoring and selection of optimum cutting conditions with progressive tool wear effect and input uncertainties |
Journal of Intelligent Manufacturing |
1589 |
2011 |
Biswas Pankaj, Mandal N. R. and Das S. |
Prediction of Welding Residual Stresses and Deformations of Large Stiffened Panels using Average Plastic Strain Method |
Journal of Science and Technology of Welding and Joining |
1590 |
2011 |
Siddharth Mehta, K. Prashanth Chauhan, S. Kanagaraj |
Modeling of thermal conductivity of nanofluids by modifying Maxwells equation using cell model approach |
Journal of Nanoparticle Research |
1591 |
2011 |
Joshi S. N. and Pande S. S. |
Intelligent process modeling and optimization of die-sinking electric discharge machining |
Applied Soft Computing |
1592 |
2011 |
U.S. Dixit, S.N. Joshi, J.P. Davim |
Incorporation of material behavior in modeling of metal forming and machining processes: A review |
Materials & Design |
1593 |
2011 |
A. K. Parimi, P.S.Robi, S. K. Dwivedy |
Severe plastic deformation of copper and Al–Cu alloy using multiple channel-die compression |
Materials and Design |
1594 |
2011 |
Sahoo BB, Sahoo N, and Saha UK |
Dual Fuel Performance Studies of a Small Diesel Engine Using Green Fuels |
Applied Mechanics and Materials |
1595 |
2011 |
R. P. Chopade, S.C. Mishra, P. Mahanta, S. Maruyama |
Effects of locations of a 3-D design object in a 3-D radiant furnace for prescribed uniform thermal conditions |
Applied Thermal Engineering |
1596 |
2011 |
Hrishikesh P. Gadgil, B. N. Raghunandan |
Effect of air injection configuration on the characteristics of effervescent sprays |
AIAA Journal of Propulsion and Power |
1597 |
2011 |
H. Gadgil, A. Dolatabadi, B. N. Raghunandan |
Mass distribution studies in effervescent sprays |
Atomization and Sprays |
1598 |
2011 |
Fonseca A, Inacio N, Kanagaraj S, Oliveira MSA, Simoes JAO |
The use of Taguchi technique to optimize the compression moulding cycle to process acetabular cup components |
Journal of Nanoscience and Nanotechnology |
1599 |
2011 |
Kanagaraj S, Fonseca A, Guedes RM, Oliveira MSA, Simoes JAO |
Thermo-mechanical behaviour of ultrahigh molecular weight polyethylene-carbon nanotubes composites under different cooling techniques |
Defect and Diffusion Forum |
1600 |
2011 |
M. Ravi Sankar, J. Ramkumar, S Aravindan |
Machining of Metal Matrix Composites with Minimum Quantity Cutting Fluid and Flood Cooling |
Advanced Materials Research |
1601 |
2011 |
S.C. Mishra, R. Muthukumaran and S. Maruyama |
The finite volume method approach to the collapsed dimension method in analyzing steady/transient radiative transfer problems in participating media |
International Communication in Heat and Mass Transfer |
1602 |
2011 |
Hrishikesh P. Gadgil, B. N. Raghunandan |
Model for predicting the mean drop size in effervescent sprays |
AIAA Journal of Propulsion and Power |
1603 |
2011 |
Manas Das, V.K. Jain, P.S Ghoshdastidar |
Investigations into out-of-roundness of internal surfaces of stainless steel tubes finished by R-MRAFF Process |
Journal of Materials and Manufacturing Processes |
1604 |
2011 |
Satyajit Panda |
Nonlinear analysis of smart annular plates using cylindrically orthotropic piezoelectric fiber-reinforced composite |
Journal of Intelligent Material Systems and Structures |
1605 |
2011 |
S. S. Gautam, R. Babu, and P. M. Dixit |
Ductile Fracture Simulation in the Taylor Rod Impact Test using Continuum Damage Mechanics |
International Journal of Damage Mechanics |
1606 |
2011 |
C. Subramanian, Sunil Balwant Deshpande and S. Senthilvelan |
Effect of Reinforced Fiber Length on Damping Performance of Thermoplastic Composites |
Advanced Composite Materials |
1607 |
2011 |
Abhishek T. Dhumal, R. Ganesh Narayanan, G. Saravana Kumar |
Simulation Based Expert System to Predict the Tensile Behaviour of Tailor Welded Blanks |
International Journal of Advanced Manufacturing Systems |
1608 |
2011 |
Monikankana Sharma, Subhash C. Mishra,& P. Mahanta |
An experimental investigation on efficiency improvement of a conventional kerosene pressure stove |
International Journal of Energy for a Clean Environment |
1609 |
2011 |
R.P Chopade, E. Agnihotri, A.K.Singh, A.Kumar, R.Uppaluri, S.C Mishra, P.Mahanta |
Application of a particle swarm algorithm for parameter retrieval in a transient conduction-radiation problem |
Numerical Heat Transfer & Part A: Applications |
1610 |
2011 |
R.P Chopade, S.C Mishra, P. Mahanta, S. Maruyama |
Numerical analysis of an inverseboundary design problem of a 3-D radiant furnace with a 3-D design object |
Numerical Heat Transfer |
1611 |
2011 |
Fonseca A, Kanagaraj S, Oliveira MSA, Simoes JAO |
Enhanced UHMWPE reinforced with MWCNT through mechanical ball-milling |
Defect and Diffusion Forum |
1612 |
2011 |
P. K. Mishra, A. K. De, M. K. Verma and V. Eswaran |
Dynamics of reorientations of large-scale flow in Rayleigh-Benard convection |
J. Fluid Mech. |
1613 |
2011 |
P. Bernard, S. Bag, K. Huang and R. Logé |
A two-site mean field model of discontinuous dynamic recrystallization |
Materials Science and Engineering A |
1614 |
2011 |
B. Nayak, S. K. Dwivedy and K.S.R.K Murthy |
Dynamic analysis of magnetorheological elastomer-based sandwich beam with conductive skins under various boundary conditions |
Journal of Sound and Vibration |
1615 |
2011 |
Ganesh, N. and Sotiropoulos, F. |
IDeC(k): A new velocity reconstruction algorithm on arbitrarily polygonal staggered meshes |
Journal of Computational Physics |
1616 |
2011 |
Eswaran M, Singh A, and Saha UK |
Experimental Investigation of Liquid Free Surface Behaviour in an Excited Tank, Proc. of the IMechE |
Part–M: Journal of Engineering for the Maritime Environment |
1617 |
2011 |
M. Hazarika, S. Deb, U.S. Dixit and J.P. Davim |
Fuzzy set based setup planning system with ability for online learning |
Proc. IMechE, Part B: J. Engineering Manufacture |
1618 |
2011 |
B. Pratiher and S. K. Dwivedy |
Nonlinear response of a vertically moving viscoelastic beam subjected to a fluctuation contact load |
Acta Mechanica. |
1619 |
2011 |
A. Patra, D. Bandyopadhyay, G. Tomar, A. Sharma, and G. Biswas |
Instability and dewetting of ultrathin solid viscoelastic films on homogeneous and heterogeneous substrates |
The Journal of Chemical Physics |
1620 |
2011 |
B.B. Sahoo, U. K. Saha and N. Sahoo |
Effect of load level on the performance of a dual fuel compression ignition engine operating on syngas fuels with varying H2/CO content |
Journal of Gas Turbine and Power, Transactions of ASME |
1621 |
2011 |
N. Sahoo and R. K. Peetala |
Transient temperature data analysis for a supersonic flight test |
ASME Journal of Heat Transfer |
1622 |
2011 |
C. Subramanian and S. Senthilvelan |
Short-term Flexural Creep Behavior and Model Analysis of a Glass-fiber-reinforced Thermoplastic Composite Leaf spring |
Journal of Applied Polymer Science |
1623 |
2011 |
S.C. Mishra and Ch. Hari Krishna |
Analysis of radiative transport in a cylindrical enclosure - an application of the modified discrete ordinate method |
Journal of Quantitative Spectroscopy and Radiative Transfer |
1624 |
2011 |
V. Kulkarni, N. Sahoo and S. D. Chavan |
Simulation of honeycomb-screen combinations for turbulence management in a subsonic wind tunnel |
Journal of Wind Engineering and Industrial Aerodynamics |
1625 |
2011 |
P. Kumari, S. Kapuria |
Boundary layer effects in rectangular cross-ply Levy-type plates using zigzag theory |
ZAMM-Zeitschrift Fur Angewandte Mathematik Und Mechanik |
1626 |
2011 |
Biswas Pankaj, and Mandal, N. R. |
Effect of Tool Geometries on Thermal History of FSW of AA1100 |
Welding Journal |
1627 |
2011 |
Biswas Pankaj and Mandal N. R. |
A Study on Port Plug Distortion caused by Narrow Gap Combined GTAW & SMAW and Electron Beam Welding |
Journal of Fusion Engineering and Design |
1628 |
2011 |
S. Kapuria, P. Kumari |
Extended Kantorovich method for three dimensional elasticity solution of laminated composite structures |
Journal of Applied Mechanics (ASME) |
1629 |
2011 |
S. Sen, S. Mittal, and G. Biswas |
Flow past a Square Cylinder at Low Reynolds Numbers |
International Journal for Numerical Methods in Fluids |
1630 |
2011 |
D. A. Perumal, A. K. Dass |
Multiplicity of Steady Solutions in Two-Dimensional Lid-Driven Cavity Flows by the Lattice Boltzmann Method |
Computers & Mathematics with Applications |
1631 |
2011 |
S.C. Mishra, Ch. Hari Krishna and M.Y. Kim |
Analysis of conduction and radiation heat transfer in a 2-D cylindrical medium using the modified discrete ordinate method and the lattice Boltzmann method |
Numerical Heat Transfer, Part A |
1632 |
2011 |
R. Muthukumaran, S.C. Mishra, S. Maruyama and K. Mitra |
Assessment of signals from a tissue phantom subjected to radiation sources of temporal spans of the order of a nano-, a pico- and a femto-second – a numerical study |
Numerical Heat Transfer, Part A |
1633 |
2011 |
R.P. Chopade, S.C. Mishra, P. Mahanta and S. Maruyama |
Numerical analysis of an inverse boundary design problem of 3-D radiant furnace with a 3-D design object |
Numerical Heat Transfer, Part A |
1634 |
2011 |
R.P. Chopade, E. Agnihotri, A.K. Singh, A. Kumar, R. Uppaluri, S.C. Mishra and P. Mahanta |
Application of particle swarm algorithm for parameter retrieval in a transient conduction-radiation problem |
Numerical Heat Transfer, Part A |
1635 |
2011 |
D. Chatterjee and G. Biswas |
The Effects of Reynolds and Prandtl Numbers on Flow and Heat Transfer Across Tandem Square Cylinders in the Steady Flow Regime |
Numerical Heat Transfer, Part A |
1636 |
2011 |
S. D. Kore, P. P. Date, S.V. Kulkarni, Satendra Kumar, Dolly Rani, M. R. Kulkarni, S.V. Desai, R.K. Rajawat, K.V. Nagesh, and D.P. Chakravarty |
Application of Electromagnetic Impact Technique for Welding Copper-to-Stainless Steel Sheets |
International Journal of Advanced Manufacturing Technology |
1637 |
2011 |
I. Chakraborty, G. Biswas, and P. S. Ghoshdastidar |
Bubble generation in quiescent and co-flowing liquids |
International Journal of Heat and Mass Transfer |
1638 |
2011 |
S.C. Mishra and A. Stephen |
Combined mode conduction and radiation heat transfer in a spherical geometry with non-Fourier Effect |
International Journal of Heat and Mass Transfer |
1639 |
2011 |
N. Sahoo and R. K. Peetala |
Transient surface heating rates from a nickel film sensor using inverse analysis |
International Journal of Heat and Mass Transfer |
1640 |
2011 |
S. Sarkar, A. Dalal and G. Biswas, |
Unsteady wake dynamics and heat transfer in forced and mixed convection past a circular cylinder in cross flow for high Prandtl numbers |
International Journal of Heat and Mass Transfer |
1641 |
2011 |
M. Ravi Sankar, V. K. Jain, J. Ramkumar, Y. M. Joshi |
Rheological Characterization of Styrene-Butadiene based medium and its Finishing Performance using Rotational Abrasive Flow Finishing Process |
International Journal of Machine tools and Manufacture |
1642 |
2011 |
Hrishikesh P. Gadgil, B. N. Raghunandan |
Some features of spray breakup in effervescent atomizers |
Experiments in Fluids |
1643 |
2011 |
Khoo W. K. S., Kalita K., and Garvey S. D. |
Practical Implementation of the Bridge Configured Winding for Producing Controllable Transverse Forces in Electrical Machines |
IEEE Transactions on Magnetics |
1644 |
2011 |
P. Janaki Ramulu, R. Ganesh Narayanan |
Weld zone representation during the formability prediction of friction stir welded blanks with similar thickness sheets |
Journal of Strain Analysis for Engineering Design |
1645 |
2011 |
D. Sharma, K. Deb, N. N. Kishore |
Domain-Specific Initial Population Strategy for Compliant Mechanisms Using Customized Genetic Algorithm |
Structural and Multidisciplinary Optimization |
1646 |
2011 |
B. Pratiher and S. K. Dwivedy |
Nonlinear vibrations and frequency response analysis of a cantilever beam under periodically varying magnetic field |
Mechanics Based Design of Structures and Machines: An International Journal |
1647 |
2011 |
V.K. Pantangi, S.C. Mishra, P. Muthukumar and R. Reddy |
Studies on porous radiant burners for LPG cooking applications |
Energy |
1648 |
2011 |
Sahoo BB, Saha UK, and Sahoo N |
Theoretical Performance Limits for a Syngas–Diesel Fueled Compression Ignition Engine from Second Law Analysis |
Energy |
1649 |
2011 |
B. B. Sahoo, U. K. Saha, and N. Sahoo |
Theoretical performance limits for syngas-diesel fueled compression ignition engine from second law analysis |
Energy |
1650 |
2011 |
R. S. Patil, M. Pandey and P. Mahanta |
Parametric Studies and Effect of Scale-up on Wall-to-Bed Heat Transfer Characteristics of Circulating Fluidized Bed Risers |
Experimental Thermal and Fluid Science |
1651 |
2011 |
Biswas Pankaj, D. Anil Kumar, Mandal N. R. and Mahapatra M. M. |
A Study on the Effect of Welding Sequence in Fabrication of Large Stiffened Plate Panels |
J. Marine. Sci. Appl. |
1652 |
2011 |
Biswas Pankaj, Mandal N. R., Sha O. P. and Mahapatra M. M. |
Thermo-mechanical and Experimental Analysis of Double Pass Line Heating |
J. Marine Sci. Appl |
1653 |
2011 |
Rama Sreekanth P.S, Kanagaraj S |
UHMWPE for total joint replacements: A review on trends and developments |
Journal of North East Regional Orthopaedic Surgeons’ Association |
1654 |
2011 |
M. Chandrasekaran, M. Muralidhar and U.S. Dixit |
An interactive online finish milling process optimization |
International Journal of Applied Engineering Research |
1655 |
2011 |
S. Kapuria, P. Kumari |
Three-dimensional iso-field micromechanics for effective electrothermoelastic properties of piezoelectric composites |
Journal of Mechanics of Materials and Structures |
1656 |
2011 |
J. C. Kalita and A. K. Dass |
Higher Order Compact Simulation of Double-Diffusive Natural Convection in a Vertical Porous Annulus |
Engineering Applications of Computational Fluid Mechanics |
1657 |
2011 |
S. Bag |
A perspective review on laser assisted microjoining |
Recent Patents on Mechanical Engineering |
1658 |
2011 |
A. Banerjee, B. Bhattacharya, and A. K. Mallik |
Forward and inverse analyses of an SMA actuated complaint link |
Journal of Mechanisms and Robotics |
1659 |
2011 |
R. Kumar, N. Sahoo, V. Kulkarni and A. Singh |
Laser based calibration technique of thin film gauges for short duration transient measurement |
Journal of Thermal Science and Engineering Applications: Transactions of ASME |
1660 |
2011 |
M.Baruah, A.Dewan, P. Mahanta |
Performance of elliptical pin fin heat exchanger with three elliptical perforations |
CFD Letters |
1661 |
2011 |
Biswas Pankaj, Sujoy Tikader, Rajesh Ranjan and Mandal N. R. |
Effect of welding tacks and sequences on residual stress in stiffened panel fabrication |
Journal of Ocean and Ship Technology |
1662 |
2011 |
P. K. Barua, D. Deka, U.S. Dixit |
Mathematical Modelling of Change of Temperature in Pulsating Heat Pipes with Single Loops |
International Journal of Energy, Information and Communications |
1663 |
2011 |
Muthukumar P, Anand P, Sachdeva P |
Performance analysis of porous radiant burners used in LPG cooking stove |
Int. J. Energy and Environment |
1664 |
2011 |
R. Ganesh Narayanan, K. Veerababu, K. Siva Krishna, G. Saravanakumar |
Determining the forming behavior of tailor welded blanks Expert systems predict results |
Stamping Journal |
1665 |
2011 |
R. Das, U.S. Dixit and S. Deb |
Effect of die land length and lubrication on the mechanical properties of the extruded products in a multi-hole extrusion process: an experimental study |
International Journal of Manufacturing Technology and Industrial Engineering |
1666 |
2011 |
B. Parida, S. Pal, P. Biswas, M. M. Mohapatra and S. Tikader |
Mechanical and Micro-structural Study of Friction Stir Welding of Al-alloy |
International Journal of Applied Research In Mechanical Engineering |
1667 |
2011 |
J. Sardar, D. Bandopadhya |
Processing, Fabrication and Investigation of Thermal Characteristics of Portland Pozzolanic Cement Filled Polypropylene Composites |
International Journal of Plastic and Polymer Technology |
1668 |
2010 |
Sukhomay Pal, Surjya K. Pal and Arun K. Samantaray |
Determination of optimal pulse metal inert gas welding parameters with a Neuro-GA technique |
Materials and Manufacturing Processes |
1669 |
2010 |
Samir K.Ghosh, Sukhomay Pal, Sujit K. Roy, Surjya K. Pal and Debabrata Basu |
Modelling of the flame temperature of solution combination synthesis of a bio-ceramic material and its parametric optimization |
Bulletin of Materials Science, Springer |
1670 |
2010 |
C. Subramanian and S.Senthilvelan |
Effect of Reinforced Fiber Length on the Joint Performance of Thermoplastic Leaf spring |
Materials and Design |
1671 |
2010 |
H. Sarangi, K.S.R.K. Murthy and D. Chakraborty |
Radial locations of strain gages for accurate measurement of mode I stress intensity factor |
Materials and Design |
1672 |
2010 |
Ponmozhi J, Goncalves FAMM, Ferreira AGM, Fonseca IMA, Kanagaraj S, Martins N, Oliveira MSA |
Thermodynamic and transport properties of CNT- water based nanofluids |
Journal of Nano Research |
1673 |
2010 |
Satheesh A, Muthukumar P |
Performance investigation of a double-stage double-effect metal hydride heat pump |
Applied Thermal Engineering |
1674 |
2010 |
B. Buragohain, P. Mahanta, V.S. Moholkar |
Biomass gasification for decentralized power generation: The Indian perspective |
Renewable and Sustainable Energy Reviews |
1675 |
2010 |
Sukhomay Pal, Surjya K. Pal and Arun K. Samantaray |
Prediction of the quality of pulsed metal inert gas welding using statistical parameters of arc signals in artificial neural network |
International Journal of Computer Integrated Manufacturing |
1676 |
2010 |
Manas Das, V.K. Jain, P.S Ghoshdastidar |
Nano-finishing of stainless-steel tubes using R-MRAFF Process |
Machining Science and Technology an International Journal |
1677 |
2010 |
D. Bandopadhya |
Derivation of Transfer Function of an IPMC Actuator Based on Pseudo-Rigid Body Model |
International Journal of Reinforced Plastics and composites |
1678 |
2010 |
B. Pratiher and S. K. Dwivedy |
Nonlinear response of a soft magneto elastic cantilever beam with end mass under static and dynamics magnetic field |
Journal of Vibration and Control |
1679 |
2010 |
S. Bag and A. De |
Error analysis of forward and reverse heat conduction and convection calculations considering uncertainties in welding |
Science and Technology of Welding and Joining |
1680 |
2010 |
Joshi S. N. and Pande S. S. |
Thermo-physical modeling of die-sinking EDM process |
Journal of Manufacturing Processes |
1681 |
2010 |
S.D. Kore, J. Imbert, M.J. Worswick, Y. Zhou |
Electromagnetic Impact Welding of Mg to Al Sheets |
Science and Technology Welding and Joining |
1682 |
2010 |
A. N. Reddy, N. Maheshwari, D. K. Sahu and G. K. Ananthasuresh |
Miniature compliant grippers with vision-based force sensing |
IEEE Transactions on Robotics |
1683 |
2010 |
Sanjib Banerjee, P.S. Robi, A. Srinivasan, Praveen Kumar Lakavath |
Effect of trace additions of Sn on microstructure and mechanical properties of Al–Cu–Mg alloys |
Materials & Design |
1684 |
2010 |
M. Ajith, R. Das, R. Uppaluri and S.C. Mishra |
Boundary heat fluxes in a square enclosure with an embedded design element |
Journal of Thermophysics and Heat Transfer |
1685 |
2010 |
S.D. Kore, P.P. Date, S.V. Kulkarni |
Numerical modeling of electromagnetic welding |
International Journal for Applied Electromagnetics and Mechanics |
1686 |
2010 |
Kulkarni V. N and Reddy K.P.J |
Accelerometer based force balance for high enthalpy facilities |
Journal of Aerospace Engineering |
1687 |
2010 |
Garg, S., Patra, K., Khetrapal, V., Pal, S. K. and Chakraborty, D. |
Genetically evolved radial basis function network based prediction of drill flank wear |
Engineering Applications of Artificial Intelligence |
1688 |
2010 |
D. S. Kumar, A. K. Dass and A. Dewan |
A multigrid-accelerated three-dimensional transient-flow code and its application to a new test problem |
Journal of Hydrodynamics |
1689 |
2010 |
D. Bandopadhya and J. Njuguna |
Comparative Performance Studies of Active Vibration Control by IPMC with Kalman Estimation Algorithm |
IEEE Transaction on Control |
1690 |
2010 |
S.K. Dwivedy, M. Srinivas |
Dynamic instability of MRE embedded soft cored sandwich beam with nonconductive skins |
Shock and Vibration |
1691 |
2010 |
R. S. Patil, P. Mahantaand M. Pandey |
Effect of scale-up on heat transfer characteristics of cyclone separators of circulating fluidized beds |
International Energy Journal |
1692 |
2010 |
S. Bag and A. De |
Probing reliability of transport phenomena based heat transfer and fluid flow analysis in autogeneous fusion welding process |
Metallurgical and Materials Transactions A |
1693 |
2010 |
D. K. Biswal, D. Bandopadhya , and S. K. Dwivedy |
Evaluation of dehydration loss and investigation of its effect on bending response of segmented IPMC actuators |
International Journal of Smart and Nano Materials |
1694 |
2010 |
Lakshmanan, S.P., Pandey, M. |
Numerical investigation of startup instabilities in parallel-channel natural circulation boiling systems |
Science and Technology of Nuclear Installations |
1695 |
2010 |
B. Ray, G. Biswas and A. Sharma |
Generation of secondary droplets in coalescence of a drop at a liquid/ liquid interface |
Journal of Fluid Mechanics |
1696 |
2010 |
Sanjib Banerjee, P.S. Robi, A. Srinivasan, Lakavath Praveen Kumar |
High temperature deformation behavior of Al–Cu–Mg alloys micro-alloyed with Sn |
Material Science and Engineering |
1697 |
2010 |
S.K. Dwivedy, N. Mahendra, K.C.Sahu |
Parametric instability of a soft and magneto rheological elastomer cored sandwich beam |
Journal of Sound and Vibration |
1698 |
2010 |
Mamilla Ravi Sankar, V.K. Jain and J. Ramkumar |
Experimental investigations into rotating workpiece Abrasive flow finishing |
Wear |
1699 |
2010 |
Lakshmanan, S.P., Pandey, M. |
Numerical investigations on power ramping procedure for a natural circulation boiling water reactor |
Nuclear Engineering and Design |
1700 |
2010 |
Durga Prasad, G.V., Pandey, M. |
Parametric effects on reactivity instabilities and nonlinear oscillations in a nuclear-coupled double channel natural circulation boiling system |
Nuclear Engineering and Design |
1701 |
2010 |
M. Hazarika, U.S. Dixit and S. Deb |
Effect of Datum Surface Roughness on Parallelism and Perpendicularity Tolerances in Milling of Prismatic Parts |
Proc. IMechE, Part B: J. Engineering Manufacture |
1702 |
2010 |
R. S. Patil, M. Pandey and P. Mahanta |
Effect of scale-up of lower and middle splash region on heat transfer characteristics of circulating fluidized bed risers |
Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy |
1703 |
2010 |
C. Subramanian and S. Senthilvelan |
Fatigue Performance of Discontinuous Fiber Reinforced Thermoplastic Leaf spring |
Journal of Materials: Design and Applications, Proc. of Ins. Mech. E Part L |
1704 |
2010 |
Kalita K, Khoo W. K. S., Garvey S. D., Hill-Cottingham R. J., Rodger D. and Eastham J. F. |
Passive Contra-Magnetised Parallel-Airgap Serial Flux Magnetic Bearings |
Journal of Mechanical Engineering Science |
1705 |
2010 |
A. Dewan, P. Patro, I. Khan, P. Mahanta |
The effect of fin spacing and material on the performance of a heat sink with circular pin fins |
Part A: Journal of Power and Energy |
1706 |
2010 |
S. Kapuria, P. Kumari, J. K. Nath |
Efficient modeling of smart piezoelectric composite laminates-A review |
Acta Mechanica |
1707 |
2010 |
A. Banerjee, B. Bhattacharya, and A. K. Mallik |
Optimum discrete location of a shape memory alloy wire for discrete actuation of a compliant link |
ASME Journal of Mechanical Design |
1708 |
2010 |
C. Subramanian and S. Senthilvelan |
Joint Performance of Glass Fiber Reinforced Polypropylene Leaf spring |
Composite Structures |
1709 |
2010 |
S. Kapuria, P. Kumari |
Three-dimensional piezoelasticity solution for dynamics of cross-ply cylindrical shells integrated with piezoelectric fiber reinforced composite actuators and sensors |
Composite Structures |
1710 |
2010 |
B. Kawale and N. Sahoo |
Heat transfer data analysis from thin film heat transfer gauge |
Journal of the Institute of Engineers (India) |
1711 |
2010 |
Biswas Pankaj and Mandal N. R. |
Analysis of Welding Distortion due to Narrow Gap welding of Upper Port Plug |
Fusion Engineering and Design |
1712 |
2010 |
P.V. Jogdand and K.S.R.K. Murthy |
A finite element based interior collocation method for the computation of stress intensity factors and T-stresses |
Engineering Fracture Mechanics |
1713 |
2010 |
H. Sarangi, K.S.R.K. Murthy and D. Chakraborty |
Optimum strain gage location for evaluating stress intensity factors in single and double ended cracked configurations |
Engineering Fracture Mechanics |
1714 |
2010 |
C. Subramanian and S. Senthilvelan |
Abrasive Behavior of Discontinuous Fiber Reinforced Polypropylene Material |
Industrial Lubrication and Tribology |
1715 |
2010 |
S.C. Mishra, A. Stephen and M.Y. Kim |
Analysis of non-Fourier conduction-radiation heat transfer in a cylindrical enclosure |
Numerical Heat Transfer, Part A |
1716 |
2010 |
S.C. Mishra, Ch. Hari Krishna and M.Y. Kim |
Lattice Boltzmann method and modified discrete ordinate method applied to radiative transport in a spherical medium with and without conduction |
Numerical Heat Transfer, Part A |
1717 |
2010 |
G. Gandikota, S. Amiroudine, D. Chatterjee and G. Biswas |
The Effect of Aiding/ Opposing Buoyancy on Two-Dimensional Laminar Flow Across a Circular Cylinder |
Numerical Heat Transfer, Part A |
1718 |
2010 |
P. Asinari, S.C. Mishra and R. Borchiellini |
A lattice Boltzmann formulation to the analysis of radiative heat transfer problems in a participating medium |
Numerical Heat Transfer, Part B |
1719 |
2010 |
A Sakurai, S.C. Mishra and S. Maryuama |
Radiation element method coupled with the lattice Boltzmann method applied to the analysis of a transient conduction and radiation heat transfer problem with heat generation in a participating medium |
Numerical Heat Transfer, Part A |
1720 |
2010 |
C. Kim, M.Y. Kim, M.J. Yu and S.C. Mishra |
Unstructured polygonal finite volume solutions of radiative heat transfer in a complex axisymmetric enclosure |
Numerical Heat Transfer, Part B |
1721 |
2010 |
P. Saha and G. Biswas |
Assessment of a Shear-Improved Subgrid Stress Closure for Turbulent Channel Flows |
International Journal of Heat and Mass Transfer |
1722 |
2010 |
S. Sarkar, A. Dalal and G. Biswas |
Mixed Convective Heat Transfer from Two Identical Square Cylinders in Cross Flow at Re=100 |
International Journal of Heat and Mass Transfer |
1723 |
2010 |
M. Hazarika, U.S. Dixit and S. Deb |
A setup planning methodology for prismatic parts considering fixturing aspects |
International Journal of Advanced Manufacturing |
1724 |
2010 |
Mamilla Ravi Sankar, V.K. Jain and J. Ramkumar |
Rotational abrasive flow finishing (R-AFF) process and its effects on finished surface topography |
International journal of machine tools and Manufacture |
1725 |
2010 |
K.S.R.K. Murthy and M. Mukhopadhyay |
Adaptive finite element analysis of mixed-mode crack problems with automatic mesh generator |
Journal for Numerical Methods in Engineering |
1726 |
2010 |
R.N.Mehta, M. Chakraborty, P. Mahanta, P.A. Parikh |
Evaluation of fuel properties of butanol-biodiesel-diesel blends and their impact on engine performance and emissions |
Industrial and Engineering Chemistry Research |
1727 |
2010 |
Khoo W. K. S., Kalita K, Garvey S. D., Hill-Cottingham R. J., Rodger D. and Eastham J. F. |
Active Axial-MMF Parallel-Airgap Serial Flux Magnetic Bearings |
IEEE Transactions on Magnetics |
1728 |
2010 |
M. Chandrasekaran, M. Muralidhar, C. Murali Krishna and U.S. Dixit |
Application of soft computing techniques in machining performance prediction and optimization: a literature review |
Int. J. Advanced Manufacturing Technology |
1729 |
2010 |
Roy T., Manikandan, P., and Chakraborty D. |
Improved shell finite element for piezothermoelastic analysis of smart fiber reinforced composite structures |
Finite Elements in Analysis and Design |
1730 |
2010 |
B. Srinivas Naik, P. Janaki Ramulu, R. Ganesh Narayanan |
Application of few necking criteria in predicting the forming limit of un-welded and tailor welded blanks |
Journal of Strain Analysis for Engineering Design |
1731 |
2010 |
M. Karthikeyan, and R. Tiwari |
Detection, localization, and sizing of a structural flaw in a beam based on forced response measurements- An experimental investigation. |
Mechanism and Machine Theory |
1732 |
2010 |
S. K. Singh, and R. Tiwari |
Identification of a Multi-Crack in a Shaft System using Transverse Frequency Response Functions. |
Mechanism and Machine Theory |
1733 |
2010 |
Kulkarni V. N, Menezes V. and Reddy K.P.J |
Effectiveness of forward facing spike for drag reduction on a large angle blunt cone in hypersonic flow |
Journal of Spacecraft and Rockets |
1734 |
2010 |
Reis J, Kanagaraj S, Fonseca A, Mathew MT, Silva FC, Potes J, Oliveira MSA, Simoes JAO |
In vitro studies on multiwalled carbon nanotubes/ultrahigh molecular weight polyethylene nano composites |
Brazilian Journal of Medical and Biological Research |
1735 |
2010 |
D. Chatterjee, G. Biswas and S. Amiroudine |
Numerical simulation of flow past row of square cylinders for various separation ratios |
Computers and Fluids |
1736 |
2010 |
K. Veerababu, R. Ganesh Narayanan, G. Saravanakumar |
An expert system for predicting the deep drawing behavior of tailor welded blanks |
Expert system with applications |
1737 |
2010 |
R. Das, S.C. Mishra and R. Uppaluri |
Inverse analysis applied to retrieval of parameters and reconstruction of temperature field in a transient conduction-radiation heat transfer problem involving mixed boundary conditions |
Int. Communications in Heat and Mass Transfer |
1738 |
2010 |
S. Jayavel, S. Tiwari, G. Biswas and M. Sen |
Kinematics of a fluid particle due to interaction of fixed inviscid vortex filaments in presence of external translation and pulsation |
International Journal of Fluid Mechanics Research |
1739 |
2010 |
Muthukumar P, Groll M |
Erratum to Metal hydride based heating and cooling systems: A review |
International Journal of Hydrogen Energy |
1740 |
2010 |
Muthukumar P, Ramana SV |
Heat and mass transfer studies in metal hydride reactor during desorption of hydrogen |
Internation Journal of Hydrogen Energy |
1741 |
2010 |
Satheesh A, Muthukumar P |
Performance investigations of a single-stage metal hydride heat pump |
Internation Journal of Hydrogen Energy |
1742 |
2010 |
Satheesh A, Muthukumar P |
Simulation of double-stage double-effect metal hydride heat pump |
Internation Journal of Hydrogen Energy |
1743 |
2010 |
B. Buragohain, P. Mahanta, V.S. Moholkar |
Thermodynamic optimization of biomass gasification for decentralized power generation and Fischer-Tropsch synthesis |
Energy |
1744 |
2010 |
S. K. Dwivedy, Srinivasulu. M, K. Sathis Narayan and A. Koushik |
Dynamic analysis of composite flexible robotic manipulator with harmonic drives using finite element method |
Advances in Vibration Engineering |
1745 |
2010 |
D.K. Sarma and U.S. Dixit |
Neural network modelling of forces and indirect prediction of tool wear in turning of grey cast iron with ceramic tool |
International Journal of Machining and Machinability of Materials |
1746 |
2010 |
S. S. Gautam, and P. M. Dixit |
Ductile Failure Simulation in Spherodized Steel using a Continuum Damage Mechanics Coupled Finite Element Formulation |
International Journal of Computational Methods |
1747 |
2010 |
D. S. Kumar, A. K. Dass and A. Dewan |
A Multigrid-Accelerated Code on Graded Cartesian Meshes for 2D Time-Dependent Incompressible Viscous Flows |
Engineering Applications of Computational Fluid Mechanics |
1748 |
2010 |
R. S. Patil, M. Pandey, P. Mahanta |
Effect of Scale-up on Heat Transfer Characteristics in Upper Splash Region of Circulating Fluidized Bed Risers |
Journal of Energy and Power Engineering |
1749 |
2010 |
Kanagaraj S, Mathew M.T, Fonseca A, Oliveira M.S.A, Simoes J.A.O, Rocha L.A |
Tribological characterization of carbon nanotubes/ultrahigh molecular weight polyethylene composites: the effects of sliding distance |
International Journal of Surface Science and Engineering |
1750 |
2010 |
M. Baruah, A. Dewanand P. Mahanta |
Comparison of straight, perforated and tapered elliptical pin fin compact heat exchangers |
IUP Journal of Mechanical Engineering |
1751 |
2010 |
S. D. Kore, P. P. Date, S.V. Kulkarni, Satendra Kumar, Dolly Rani, M. R. Kulkarni, S.V. Desai, R.K. Rajawat, K.V. Nagesh, and D.P. Chakravarty |
Electromagnetic impact welding of Cu to Cu sheets |
International Journal of Material Forming |
1752 |
2010 |
R. K. Saxena, S. S. Gautam, and P. M. Dixit |
Numerical Simulation of Fracture in Cup Drawing |
International Journal of Material Forming |
1753 |
2010 |
D. A. Perumal, G. V. S. Kumar, A. K. Dass |
Application of Lattice Boltzmann Method to Flows in Microgeometries |
CFD letters |
1754 |
2010 |
P. Mahanta, R. S. Patil, and M. Pandey |
Effect of particle size and sand inventory on wall-to-bed heat transfer characteristics of circulating fluidized bed riser |
World Congress on Engineering |
1755 |
2010 |
Manas Das, Ajay Sidpara, V.K. Jain, P.S. Ghoshdastidar |
Parametric analysis of MR polishing fluid using statistical technique |
International Journal of Precision Technology |
1756 |
2010 |
D. A. Perumal, A. K. Dass |
Simulation of Incompressible Flows in Two-Sided Lid-Driven Square Cavities. Part I-FDM |
CFD Letters |
1757 |
2010 |
D. A. Perumal, A. K. Dass |
Simulation of Incompressible Flows in Two-Sided Lid-Driven Square Cavities. Part II-LBM |
CFD Letters |
1758 |
2010 |
Kulkarni V. N and Reddy K.P.J |
Counterflow drag reduction studies for a blunt cone in high enthalpy flow |
International Journal of Hypersonics |
1759 |
2010 |
N. Sahoo and K.P.J. Reddy |
Force measurement techniques for hypersonic flows in shock tunnel |
International Journal of Hypersonics |
1760 |
2010 |
P. K. Barua, D. Deka, U.S. Dixit |
Mathematical modeling of change of temperature in a pulsating heat pipe with multiple turns |
International Journal of Energy, Information and Communications |
1761 |
2010 |
B. Kawale, R. K. Peetala, N. Sahoo and V. Kulkarni |
Numerical methods to determine convecting heating rates on aerodynamic surfaces |
International Journal of Hypersonics |
1762 |
2010 |
M. Ravi Sankar, V. K. Jain, J. Ramkumar, Kamal K. Kar |
Rheological characterization and performance evaluation of a new medium developed for abrasive flow finishing |
International Journal of Precision Technology |
1763 |
2010 |
K. Siva Krishna, R. Ganesh Narayanan, G. Saravanakumar |
Tailor welded blank forming limit computation by neural network based expert system |
International Journal: Computer and Experimental Simulations in Engineering and Science |
1764 |
2009 |
D. Chatterjee, G. Biswas and S. Amiroudine |
Numerical Investigation of Forced Convection Heat Transfer in Unsteady Flow Past a Row of Square Cylinders |
International Journal of Heat and Fluid Flow |
1765 |
2009 |
M.K. Sinha, S. Deb, R. Das and U.S. Dixit |
Theoretical and experimental investigations on multi-hole extrusion process |
Materials & Design |
1766 |
2009 |
Biswas Pankaj and Mandal N. R., |
Experimental Study on Friction Stir Welding of Marine grade Aluminum Alloy |
Journal of Ship Production |
1767 |
2009 |
Sahoo BB, Sahoo N, and Saha UK |
Effect of Engine Parameters and Type of Gaseous Fuel on the Performance of Dual Fuel Gas Diesel Engines - A Critical Review |
Renewable and Sustainable Energy Reviews |
1768 |
2009 |
M. K. Sinha, S. Deb and U.S. Dixit |
Design of a multi-hole extrusion process |
Materials and Design |
1769 |
2009 |
Biswas Pankaj and Mandal N. R. |
A comparative study of three different approaches of FE analysis for prediction of welding distortion of orthogonally stiffened plate panels |
Journal of Ship Production |
1770 |
2009 |
G. Tomar, G. Biswas, A. Sharma and S.W.J. Welch |
Influence of Electric Field on Saturated Film Boiling |
Physics of Fluids |
1771 |
2009 |
Hrishikesh P. Gadgil, B. N. Raghunandan |
Effect of skewness on the characteristics of impinging jet atomizers |
Atomization and Sprays |
1772 |
2009 |
I. Chakraborty, B. Ray, G. Biswas, F. Durst, A. Sharma, and P. S. Ghoshdastidar |
Computational Investigation on Bubble Detachment from Submerged Orifice in Quiescent Liquid under Normal and Reduced Gravity |
Physics of Fluids |
1773 |
2009 |
R. Muthukumaran and S.C. Mishra |
Analysis of the transport of a train of short-pulse radiation of Gaussian temporal profile through a 2-D participating medium |
Heat Transfer Engineering |
1774 |
2009 |
Muthukumar P, Satheesh A, Linder M, Mertz R, Groll M |
Studies on hydriding kinetics of some La-based metal hydride alloys |
Int. J. Hydrogen Energy |
1775 |
2009 |
Anil, N. and Chakraborty, D. |
Effective properties of Thermo-Electro-Mechanically Coupled Piezoelectric Fiber Reinforced Composites |
Materials and Design |
1776 |
2009 |
Ajay Sidpara, Manas Das, V.K. Jain |
Rheological Characterization of Magnetorheological finishing Fluid |
Journal of Materials and Manufacturing Processes |
1777 |
2009 |
S. Bag, A. De and T. DebRoy |
A genetic algorithm assisted inverse convective heat transfer model for tailoring weld geometry |
Materials and Manufacturing Processes |
1778 |
2009 |
Jagu S. Rao and R. Tiwari |
Design Optimization of Double-Acting Hybrid Magnetic Thrust Bearings with Control Integration Using Multi-Objective Evolutionary Algorithms. |
Mechatronics |
1779 |
2009 |
Roy T. and Chakraborty D. |
Genetic algorithm based optimal control of smart composite shell structures under mechanical loading and thermal gradient |
Smart Materials and Structures |
1780 |
2009 |
Muthukumar P, Umekar MM |
Study of coupled heat and mass transfer during absorption in a MmNi4.6Al0.4 based hydrogen storage device |
Sadhana |
1781 |
2009 |
S. R. Deepak and G. K. Ananthasuresh |
James watt and his linkages |
Resonance |
1782 |
2009 |
P. Kumari, J.K. Nath, S. Kapuria, P.C. Dumir |
Efficient global zigzag theory for elastic laminated plates |
Journal of Reinforced Plastics and Composites |
1783 |
2009 |
Biswas Pankaj, Mandal N. R., Saravanan M. and Velmurugan S. |
Experimental Study on Square-Butt Single-Pass Single-Side Submerged Arc Welding of Low-Carbon Microalloyed Steel |
Journal of Ship Production |
1784 |
2009 |
Mondal and S.C. Mishra |
Analysis of 3-D conductive-radiative transfer using LBM and FVM on non-uniform lattices |
Journal of Thermophysics and Heat Transfer |
1785 |
2009 |
Fonseca A, Kanagaraj S, Oliveira MSA, Simoes JAO |
Nanocompositos para aplicacoes biomedicas |
O Molde Ano |
1786 |
2009 |
Biswas Pankaj, Mandal N. R. and Sha, O. P. |
3-D FEM and ANN prediction of thermal history and residual deformation of line heating by oxy acetylene gas flame |
Journal of Mechanical Behavior of Materials |
1787 |
2009 |
S. Kakati, P. Mahanta |
Effect of fin-aided burner on thermal performance of pressurized kerosene stove |
Journal of Enhanced Heat Transfer |
1788 |
2009 |
S. Sen, S. Mittal and G. Biswas |
Steady Separated Flow Past a Circular Cylinder at Low Reynolds Numbers |
Journal of Fluid Mechanics |
1789 |
2009 |
Muthukumar P, Ramana SV |
Numerical simulation of coupled heat and mass transfer in metal hydride based hydrogen storage reactor |
Journal of Alloys Compound |
1790 |
2009 |
Satyajit Panda and M. C. Ray |
Active control of geometrically nonlinear vibrations of functionally graded laminated composite plates using piezoelectric fiber reinforced composites |
Journal of Sound and Vibration |
1791 |
2009 |
S. Kapuria, P. Kumari, J.K. Nath |
Analytical piezoelasticity solution for vibration of piezoelectric laminated angle-ply circular cylindrical panels |
Journal of Sound and Vibration |
1792 |
2009 |
Roy T. and Chakraborty, D. |
Optimal Vibration Control of Smart Fiber Reinforced Composite Shell Structures using Improved Genetic Algorithm |
Journal of Sound and Vibration |
1793 |
2009 |
Mamilla Ravi Sankar, J. Ramkumar and V.K. Jain |
Experimental investigation and mechanism of material removal in nano finishing of MMCs using abrasive flow finishing (AFF) process |
Wear |
1794 |
2009 |
Lakshmanan, S.P., Pandey, M. |
Analysis of startup oscillations in natural circulation boiling systems |
Nuclear Engineering and Design |
1795 |
2009 |
Lakshmanan, S.P., Pandey, M., Pradeep Kumar, P., Iyer, K.N. |
Study of startup transients and power ramping of natural circulation boiling systems |
Nuclear Engineering and Design |
1796 |
2009 |
S. Senthilvelan and R. Gnanamoorthy |
Efficiency of Injection Molded Polymer Composite Spur Gears |
Journal of Engineering Tribology, Proc. of Ins. Mech. E Part J |
1797 |
2009 |
Biswas Pankaj and Mandal N. R. |
3D FEM and Experimental Thermo-mechanical analysis of Single Pass Single Sided Submerged Arc Welding of C-Mn Steel Plates |
Proc. IMechE, Part-B |
1798 |
2009 |
R.M. Bhatnagar, B. Bhattacharya and G. Biswas |
Analysis of Pilot Valve and Taper Groove Based Damper |
Proceedings of I Mech E London Part C, J. Mechanical Engineering Science |
1799 |
2009 |
C. Subramanian and S. Senthilvelan |
Development and Preliminary Performance Evaluation of Discontinuous Fiber Reinforced Thermoplastic Leaf spring |
Journal of Materials: Design and Applications, Proc. of Ins. Mech. E Part L |
1800 |
2009 |
D. Bandopadhya and J. Njuguna |
Modeling and Analysis of an IPMC Rocker Based 4-bar for Variable Path Generation Using Euler-Bernoulli Approach |
Journal of Mechanical Engineering Science |
1801 |
2009 |
Biswas Pankaj, Mahapatra M. M. and Mandal N. R. |
Numerical and experimental study on prediction of thermal history and residual deformation of double sided fillet welding |
Part B, Journal of Engineering Manufacture |
1802 |
2009 |
P. Goswami, L. Barbora, S.S. Cameotra, P. Mahanta, S. Chatterjee |
Silk-fiber immobilized lipase-catalyzed hydrolysis of emulsified sunflower oil |
Applied Biochemistry and Biotechnology |
1803 |
2009 |
K. Sunil Kumar, R. Tiwari and P.V.V.N. Prasad |
An Optimum Design of Crowned Cylindrical Roller Bearings Using Genetic Algorithms |
Transactions of ASME , Journal of Mechanical Design |
1804 |
2009 |
S.C. Mishra and T.B. Pavan Kumar |
Analysis of a hyperbolic heat conduction-radiation problem with temperature dependent thermal conductivity |
ASME Journal of Heat Transfer |
1805 |
2009 |
S. D. Kore, P. P. Date, S.V. Kulkarni, Satendra Kumar, Dolly Rani, M. R. Kulkarni, S.V. Desai, R.K. Rajawat, K.V. Nagesh, and D.P. Chakravarty |
Electromagnetic Welding of Al-to-Al-Li Sheets |
ASME, Journal of Manufacturing Science and Engineering |
1806 |
2009 |
D.K. Sarma and U.S. Dixit |
Environment-friendly strategies for efficient utilization of cutting tools in finish turning, Transaction of ASME |
Journal of Manufacturing Science and Engineering |
1807 |
2009 |
B. Pratiher and S. K. Dwivedy |
Nonlinear Vibration of a Magneto-Elastic Cantilever Beam with Tip Mass |
Journal of Vibration and Acoustics |
1808 |
2009 |
DN Basu, S Bhattacharyya and PK Das |
Steady-state Behavior of a Two-phase Natural Circulation Loop with Thermodynamic Nonequilibrium |
ASME Journal of Heat Transfer |
1809 |
2009 |
P.C. Dumir, P. Kumari, S. Kapuria |
Assessment of third order smeared and zigzag theories for buckling and vibration of flat angle-ply hybrid piezoelectric panels |
Composite Structures |
1810 |
2009 |
Eswaran M, Saha UK, and Maity D |
Effect of Baffles on Partially Filled Cubic Tank: Numerical Simulation and Experimental Validation |
Computers and Structures |
1811 |
2009 |
B. Mondal and S.C. Mishra |
The lattice Boltzmann method and the finite volume method applied to conduction-radiation problems with heat flux boundary conditions |
International Journal for Numerical Methods in Engineering |
1812 |
2009 |
A. P. Singh, A. K. De, V. K. Carpenter, V. Eswaran and K. Muralidhar |
Flow past a transversely oscillating square cylinder in free stream |
International Journal for Numerical Methods in Fluids |
1813 |
2009 |
C. Subramanian and S. Senthilvelan |
Effect of Reinforced Fiber length on Hysteretic Heating of Discontinuous Fiber Reinforced Polypropylene |
International Journal of Polymeric Materials |
1814 |
2009 |
D. S. Kumar, A. K. Dass and A. Dewan |
Analysis of non-Darcy models for mixed convection in a cavity using multigrid approach |
Numerical Heat Transfer Part A |
1815 |
2009 |
S.C. Mishra, M.Y. Kim, R. Das, M. Ajith and R. Uppaluri |
Lattice Boltzmann method applied to the analysis of transient conduction-radiation problem in a cylindrical medium |
Numerical Heat Transfer, Part A |
1816 |
2009 |
M. Ajith, R. Das, R. Uppaluri and S.C. Mishra |
Optimization of heat fluxes on the heater and the design surfaces of a radiating-conducting medium |
Numerical Heat Transfer, Part A |
1817 |
2009 |
B. Mondal and S.C. Mishra |
Simulation of natural convection in the presence of volumetric radiation using the lattice Boltzmann method |
Numerical Heat Transfer, Part A |
1818 |
2009 |
G. Biswas and S. Sarkar |
Effect of Thermal Buoyancy on Vortex Shedding Past a Circular Cylinder in Cross Flow at Low Reynolds Numbers |
International Journal of Heat and Mass Transfer |
1819 |
2009 |
R. Das, S.C. Mishra and R. Uppaluri |
Retrieval of thermal properties in a transient conduction radiation problem with variable thermal conductivity |
International Journal of Heat and Mass Transfer |
1820 |
2009 |
Muthukumar P, Satheesh A, Madhavakrishna U, Dewan A |
Numerical investigation of coupled heat and mass transfer during desorption of hydrogen in metal hydride beds |
Energy Conversion and Management |
1821 |
2009 |
S. Bag, A. Trivedi and A. De |
Development of a finite element based conduction mode heat transfer model for laser welding process using an adaptive volumetric heat source |
International Journal of Thermal Science |
1822 |
2009 |
B. Mondal and S.C. Mishra |
Numerical analysis of solidification of a 3-D semitransparent medium in presence of volumetric radiation |
International Journal of Thermal Sciences |
1823 |
2009 |
Satyajit Panda and M. C. Ray |
Control of nonlinear vibrations of functionally graded plates using 1-3 piezoelectric composite |
AIAA Journal |
1824 |
2009 |
Joshi S. N. and Pande S. S. |
Development of an intelligent process model for EDM |
International Journal of Advanced Manufacturing Technology |
1825 |
2009 |
A. Banerjee, B. Bhattacharya, and A. K. Mallik |
Forward and inverse analyses of smart compliant mechanism for path generation |
Mechanism and Machine Theory |
1826 |
2009 |
B. Pratiher and S. K. Dwivedy |
Nonlinear dynamics of a soft magneto-elastic Cartesian manipulator |
International Journal of Nonlinear Mechanics |
1827 |
2009 |
Sukhomay Pal, Santosh Malviya, Surjya K. Pal and Arun K. Samantaray |
Optimization of quality characteristics parameters in a pulsed metal inert gas welding process using grey-based Taguchi method |
International Journal of Advanced Manufacturing Technology |
1828 |
2009 |
P.P. Gudur and U.S. Dixit |
An application of fuzzy inference for studying the dependency of roll force and roll torque on process variables in cold flat rolling |
Int. J. Advanced Manufacturing Technology |
1829 |
2009 |
Mamilla Ravi Sankar, S. Mondal, J. Ramkumar, V.K. Jain |
Experimental Investigations and Modeling of Drill Bit Guided Abrasive Flow Finishing (DBG-AFF) Process |
International Journal of Advanced Manufacturing Technology |
1830 |
2009 |
N. Raghavendra, Rakshit Koranne, Sukhomay Pal, Surjya K. Pal and Arun K. Samantaray |
Joint strength prediction in a pulsed MIG welding process using hybrid optimized model |
International Journal of Advanced Manufacturing Technology |
1831 |
2009 |
D. Bandopadhya, B. Bhattacharya, A. Dutta |
Characterization of IPMC as Passive and Active Damper as an Alternative Novel Smart Actuator |
Journal of Reinforced Plastics and Composites |
1832 |
2009 |
Ganesh, N., N Shende and Balakrishnan, N. |
R-parameter: A Local truncation error based adaptive framework for finite volume compressible flow solvers |
Computers and Fluids |
1833 |
2009 |
K. Veerababu, R. Ganesh Narayanan, G. Saravanakumar |
An expert system based on artificial neural network for predicting the tensile behavior of tailor welded blanks |
Expert system with applications |
1834 |
2009 |
Panigrahy PK, Saha UK, and Maity D |
Experimental Studies on Sloshing Behaviour Due to Horizontal Movement of Liquids in Baffled Tanks |
Ocean Engineering |
1835 |
2009 |
S.C. Mishra, B. Mondal, T. Kush and B.S.R. Krishna |
Solving transient heat conduction problems on uniform and non-uniform lattices using the lattice Boltzmann method |
Int. Communications in Heat and Mass Transfer |
1836 |
2009 |
D.K. Ojha, U.S. Dixit and J. Paulo Davim |
A soft computing based optimization of multi-pass turning processes |
Int. J. Materials and Product Technology |
1837 |
2009 |
Satheesh A, Muthukumar P, Dewan A |
Computational study of metal hydride cooling system |
Int. J. Hydrogen Energy |
1838 |
2009 |
Muthukumar P, Linder M, Mertz R, Laurien E |
Measurement of thermodynamic properties of some hydrogen absorbing alloys |
Int. J. Hydrogen Energy |
1839 |
2009 |
I. Khan, M., Baruah , A. Dewan, P. Mahanta |
Computational investigation of energy efficient pin fin cross section for a compact heat exchanger |
International Energy Journal |
1840 |
2009 |
M. Sharma, S.C. Mishra and P. Acharjee |
Thermal efficiency study of conventional kerosene pressure stoves equipped with porous radiant inserts |
International Journal of Energy Research |
1841 |
2009 |
Kulkarni V. N and Reddy K.P.J |
Effect of counterflow supersonic jet on blunt body heat transfer rates for oncoming high enthalpy flow |
Journal of engineering physics and thermophysics |
1842 |
2009 |
Roy T. and Chakraborty, D. |
Genetic Algorithm based Optimal Design for Vibration Control of Composite Shell Structures using Piezoelectric Sensors and Actuators |
International Journal of Mechanics of Materials and Design |
1843 |
2009 |
S. R. Deepak, M. Dinesh, D. K. Sahu, and G. K. Ananthasuresh |
A comparative study of the formulations and benchmark problems for the topology optimization of compliant mechanisms |
Journal of Mechanisms and Robotics |
1844 |
2009 |
P. Kalita, G. Mohan, G. P. Kumar and P. Mahanta |
Determination and comparison of kinetic parameters of low density biomass Fuels |
Journal of Renewable and Sustainable Energy, American Institute of Physics |
1845 |
2009 |
D. A. Perumal, V. Krishna, G. Sarvesh, A. K. Dass |
Numerical Simulation of Gaseous Microflows by Lattice Boltzmann Method |
International Journal of Recent Trends in Engineering |
1846 |
2008 |
Muthukumar P, M. Maiya MP, Murthy SS |
Performance tests on a thermally operated hydrogen compressor |
Int. J. Hydrogen Energy |
1847 |
2008 |
Sukhomay Pal, Surjya K. Pal and Arun K. Samantaray |
A Neuro-wavelet packet analysis based on current signature for weld joint strength prediction in a pulsed metal inert gas welding process |
Science and Technology of Welding and Joining |
1848 |
2008 |
Biswas Pankaj and Mandal N. R. |
Welding Distortion Simulation of Large Stiffened Plate Panels |
Journal of Ship Production |
1849 |
2008 |
P.C. Dumir, J.K. Nath, P. Kumari, S. Kapuria |
Improved efficient zigzag and third order theories for circular cylindrical shells under thermal loading |
Journal of Thermal Stresses |
1850 |
2008 |
Mago, P.J.,Srinivasan, K., Chamra, L.M., and Somayaji, C. |
An Examination of Exergy Destruction in Organic Rankine Cycles |
International Journal of Energy Research |
1851 |
2008 |
Kulkarni V. N, Hegde G. M, Jagadeesh G., Arunan E. and Reddy K.P.J |
Aerodynamic drag reduction by heat addition into the shock layer for a large angle blunt cone in hypersonic flow |
Physics of Fluids |
1852 |
2008 |
S.C. Mishra, T.B. Pavan Kumar and B. Mondal |
Lattice Boltzmann method applied to the solution of energy equation of a radiation and non-Fourier heat conduction problem |
Numerical Heat Transfer, Part A |
1853 |
2008 |
Kulkarni V. N and Reddy K.P.J. |
Enhancement in counterflow drag reduction by supersonic jet in high enthalpy flows |
Physics of Fluids |
1854 |
2008 |
Garg. S., Patra, K., Pal, S. K., and Chakraborty, D. |
Effect of Different Basis Functions on a Radial Basis Function Network in Prediction of Drill Flank Wear from Motor Current Signals |
Soft Computing - A Fusion of Foundations, Methodologies and Applications, Springer Publications |
1855 |
2008 |
Y.S. Kushwah, P. Mahanta and S.C. Mishra |
Some studies on fuel characteristics of Mesua Ferrea |
Heat Transfer Engineering |
1856 |
2008 |
Roy T. and Chakraborty, D. |
GA-LQR based Optimal Vibration Control of Smart FRP Composite Structures with bonded PZT patches |
Journal of Reinforced Plastics and Composites |
1857 |
2008 |
M. Pathak, A.K. Dass, and A. Dewan |
An Investigation of Turbulent Rectangular Jet Discharged into a Narrow Channel Weak Crossflow |
Journal of Hydrodynamics |
1858 |
2008 |
S. Bag and A. De |
Development of a three-dimensional heat transfer model for GTAW process using finite element method coupled with a genetic algorithm based identification of uncertain input parameters |
Metallurgical and Materials Transactions A |
1859 |
2008 |
Somayaji, C., Mago, P.J., Chamra, L.M., and Srinivasan, K. |
An Examination of Regenerative Rankine Cycles Using Dry Fluids. |
Applied Thermal Engineering |
1860 |
2008 |
S. Bag and A. De |
Development of an efficient numerical heat transfer model coupled with genetic algorithm based optimization for the prediction of process variables in GTA spot welding |
Science and Technology of Welding and Joining |
1861 |
2008 |
P.P. Gudur and U.S. Dixit |
A neural network-assisted finite element analysis of cold flat rolling |
Engineering Applications of Artificial Intelligence |
1862 |
2008 |
Satyajit Panda and M. C. Ray |
Active Constrained Layer Damping of Geometrically Nonlinear Vibrations of Functionally Graded Plates Using Piezoelectric Fiber Reinforced Composites |
Smart Materials and Structures |
1863 |
2008 |
D. Bandopadhya, B. Bhattacharya, A. Dutta |
Active vibration control strategy for a single link flexible manipulator using ionic polymer metal composites |
Journal of Intelligent Material Systems and Structures |
1864 |
2008 |
Anil Borah, P.S. Robi, Ajit L. Mujumdar, A. Srinivasan |
Microstructural evolution and hardening behaviour of cast and heat-treated ru-al and ru-al-ni alloys |
Metals and Materials International |
1865 |
2008 |
Biswas Pankaj, Mandal N. R. and Sha O.P. |
A study on generation of compound curved surfaces by line heating using oxy-acetylene gas flame |
Journal of Ship Production |
1866 |
2008 |
G. Tomar, G. Biswas |
Multi-mode Analysis of Bubble Growth in Saturated Film Boiling |
Physics of Fluids |
1867 |
2008 |
D. Bandopadhya, B. Bhattacharya, A. Dutta |
Pseudo-Rigid Body Modeling of IPMC for a Partially Compliant 4-bar Mechanism for Work Volume Generation |
Journal of Intelligent Material Systems and Structures |
1868 |
2008 |
Panda, S. S., Chakraborty, D. and Pal, S. K. |
Drill Wear Prediction using Different Neural Network Architecture |
International Journal of Knowledge-Based and Intelligent Engineering Systems |
1869 |
2008 |
C. Subramanian and S. Senthilvelan |
Effect of Fiber length on the Friction and Wear of Discontinuous Fiber Reinforced Polypropylene Material |
International Journal of Plastics Technology |
1870 |
2008 |
Sukhomay Pal, Surjya K. Pal and Arun K. Samantaray |
Sensor based weld bead geometry prediction in pulsed metal inert gas welding process through artificial neural networks |
International Journal of Knowledge-Based and Intelligent Engineering Systems |
1871 |
2008 |
G.V. Durga Prasad, G. Gopa Kishor, M. Pandey, U.S. Dixit |
Numerical simulations and design optimization of the PHT loop of natural circulation BWR |
Science and Technology of Nuclear Installations |
1872 |
2008 |
M. Nishi, B. Uensal, F. Durst and G. Biswas |
Laminar-to-Turbulent Transition of Pipe Flows through Puffs and Slugs |
Journal of Fluid Mechanics |
1873 |
2008 |
Muthukumar P, Maiya MP, Murthy SS, Vijay R, Sundaresan R |
Tests on mechanically alloyed Mg2Ni for hydrogen storage |
Journal of Alloys and Compound |
1874 |
2008 |
G.V. Durga Prasad, M. Pandey |
Stability analysis and nonlinear dynamics of natural circulation boiling water reactors |
Nuclear Engineering and Design |
1875 |
2008 |
G.V. Durga Prasad, M. Pandey, S.K. Pradhan, S.K. Gupta |
Study of flow instabilities in double channel natural circulation boiling systems |
Nuclear Engineering and Design |
1876 |
2008 |
Saha UK, Mitra M, Menon SJ, John NT, Gajapathi SS, and Behera P |
Preliminary Design Analysis of a Light Weight Combat Aircraft, Proc. of the IMechE |
Part – G: Journal of Aerospace Engineering |
1877 |
2008 |
S. K. Laha, H. Banjare, S. K. Kakoty |
Stability analysis of flexible rotor supported on finite hydrodynamic porous journal bearing using non-linear transient method |
Journal of Engineering Tribology |
1878 |
2008 |
J. C. Kalita, A. K. Dass and N. Nidhi |
An efficient transient Navier-Stokes solver on compact nonuniform space grids |
Journal of computational and applied mathematics |
1879 |
2008 |
S.D. Kore, P.P. Date, S.V. Kulkarni |
Electromagnetic impact welding of aluminum to stainless steel sheets |
Journal of Materials Processing Technology |
1880 |
2008 |
Sukhomay Pal, Surjya K. Pal and Arun K. Samantaray |
Artificial neural network modeling of weld joint strength prediction of a pulsed metal inert gas welding process using arc signals |
Journal of Materials Processing Technology |
1881 |
2008 |
Satyajit Panda and M. C. Ray |
Geometrically nonlinear analysis of smart functionally graded plates integrated with a layer of vertically reinforced 1-3 piezoelectric composite |
Acta Mechanica |
1882 |
2008 |
SushovanChatterjee , LepakshiBarbora , Swaranjit Singh ,Cameotra ,PinakeswarMahanta,PranabGoswami |
Silk-fiber immobilized lipase-catalyzed hydrolysis of emulsified sunflower oil |
Applied Biochemistry and Biotechnology |
1883 |
2008 |
P.P. Gudur and U.S. Dixit |
A combined finite element and finite difference analysis of cold flat rolling |
Transaction of ASME, Journal of Manufacturing Science and Engineering |
1884 |
2008 |
M. Karthikeyan, R. Tiwari and S. Talukdar |
Development of a Novel Algorithm for a Crack Detection, Localization and Sizing in a Beam based on Forced Response Measurements. |
Transactions of ASME, Journal of Vibration and Acoustics |
1885 |
2008 |
R. Das, S.C. Mishra, M. Ajith and R. Uppaluri |
An inverse analysis of a transient 2-D conduction-radiation problem using the lattice Boltzmann method and the finite volume method coupled with the genetic algorithm |
Journal of Quantitative Spectroscopy and Radiative Transfer |
1886 |
2008 |
R. Muthukumaran and S.C. Mishra |
Thermal signatures of a localized inhomogeneity in a 2D participating medium subjected to an ultra-fast step-pulse laser wave |
Journal of Quantitative Spectroscopy and Radiative Transfer |
1887 |
2008 |
Saha UK, Thotla S and Maity D |
Optimum Design Configuration of Savonius Rotor through Wind Tunnel Experiments |
Journal of Wind Engineering & Industrial Aerodynamics |
1888 |
2008 |
M. Pathak, N. Sahoo and A. Dewan |
Experimental investigation of pressure gradient characteristics in a mass flow rate controlled pulsating pipe flow |
Institute of Engineers Journal (India) |
1889 |
2008 |
P.C. Dumir, S. Kapuria, P. Kumari, J.K. Nath |
Two-dimensional benchmark solution for buckling and vibration of simply supported hybrid piezoelectric angle-ply flat panels |
ZAMM-Zeitschrift Fur Angewandte Mathematik Und Mechanik |
1890 |
2008 |
P. Kumari, J.K. Nath, S. Kapuria, P.C. Dumir |
An improved third order theory and assessment of efficient zigzag theory for angle-ply flat hybrid panels |
Composite Structures |
1891 |
2008 |
A. N. Reddy and G. K. Ananthasuresh |
On computing forces from the noisy displacement data of an elastic body |
International Journal for Numerical Methods in Engineering |
1892 |
2008 |
S. R. Deepak and A. Ghosal |
Special coordinates associated with recursive forward dynamics algorithm for open loop rigid multibody systems |
Mechanics |
1893 |
2008 |
P. Kalita, U.S. Dixit, P. Mahanta and U.K. Saha |
A Novel Energy Efficient Machine for Plate Manufacturing from Arecanut Leaf Sheath |
Journal of Scientific & Industrial Research |
1894 |
2008 |
S. K. Roy, Sukhomay Pal, Samir Kumar Ghosh, P. P. Dey |
Machining of interpenetrating phase Aluminim/Alumina composite by electrical discharge technique |
Transaction of Indian Ceramic Society |
1895 |
2008 |
A. Dalal, V. Eswaran and G. Biswas |
A Finite Volume Method for Navier-Stokes Equations on Unstructured Meshes |
Numerical Heat Transfer Part B |
1896 |
2008 |
R. Ranjan, A. Dalal and G. Biswas |
A Numerical Study of Fluid flow and Heat Transfer around a Square Cylinder at Incidence using Unstructured Grids |
Numerical Heat Transfer Part A |
1897 |
2008 |
M. Pathak, A. Dewan and A.K. Dass |
Distribution of Temperature as a Passive Scalar in the Flow Field of a Heated Turbulent Jet in a Crossflow |
Numerical Heat Transfer |
1898 |
2008 |
R. Muthukumaran and S.C. Mishra |
Effects of the incidence of a Gaussian-temporal short-pulse laser of different spatial profiles on a 2D rectangular inhomogeneous participating medium |
Numerical Heat Transfer, Part A |
1899 |
2008 |
R. Muthukumaran and S.C. Mishra |
Radiative transfer of a short-pulse laser wave of Gaussian temporal profile through a 2-D participating medium containing inhomogeneities of different shapes at various locations |
Numerical Heat Transfer, Part A |
1900 |
2008 |
R. Das, S.C. Mishra and R. Uppaluri |
Simultaneous reconstruction of thermal field and retrieval of parameters in a cylindrical enclosure |
Numerical Heat Transfer, Part A |
1901 |
2008 |
B. Mondal, S.C. Mishra, P. Asinari and R. Borchiellini |
Analysis of a localized fire in a 3-D tunnel using a hybrid solver: Lattice Boltzmann method, finite volume method and fully explicit upwind scheme |
Numerical Heat Transfer, Part A |
1902 |
2008 |
R. Muthukumaran and S.C. Mishra |
Interaction of a short-pulse laser of a Gaussian temporal profile with an inhomogeneous medium |
Numerical Heat Transfer, Part A |
1903 |
2008 |
R. Das, S.C. Mishra and R. Uppaluri |
Multi-parameter estimation in a transient conduction-radiation problem using the lattice Boltzmann method and the finite volume method coupled with the genetic algorithms |
Numerical Heat Transfer, Part A |
1904 |
2008 |
S.C. Mishra, N.A. Krishna, N. Gupta and G.R. Chaitanya |
Combined conduction and radiation heat transfer with variable thermal conductivity and variable refractive index |
International Journal of Heat and Mass Transfer |
1905 |
2008 |
Dalal, A., and Das, M. K. |
Heatline Method for the Visualization of Natural Convection in a Complicated Cavity |
International Journal of Heat and Mass Transfer |
1906 |
2008 |
B. Mondal and S.C. Mishra |
Lattice Boltzmann method applied to the solution of the energy equations of the transient conduction and radiation problems on non-uniform lattices |
International Journal of Heat and Mass Transfer |
1907 |
2008 |
S.C. Mishra, N.C. Behera, A.K. Garg and A. Mishra |
Solidification of a 2-D semitransparent medium using the lattice Boltzmann method and the finite volume method |
International Journal of Heat and Mass Transfer |
1908 |
2008 |
R. Muthukumaran and S.C. Mishra |
Transient response of a planar participating medium subjected to a train of short-pulse radiation |
International Journal of Heat and Mass Transfer |
1909 |
2008 |
R. Muthukumaran and S.C. Mishra |
Transport of a train of short-pulse radiation of step temporal profile through a 2-D participating medium |
International Journal of Heat and Mass Transfer |
1910 |
2008 |
P.P. Gudur, M.A. Salunkhe and U.S. Dixit |
A theoretical study on the application of asymmetric rolling for the estimation of friction |
International Journal of Mechanical Sciences |
1911 |
2008 |
Manas Das, V.K. Jain, P.S. Ghoshdastidar |
Fluid Flow Analysis of Magnetorheological Abrasive Flow Finishing (MRAFF) Process |
International Journal of Machine Tools and Manufacture |
1912 |
2008 |
DN Basu, S Bhattacharyya and PK Das |
Effect of Geometric Parameters on Steady-state Performance of Single-phase NCL with Heat Loss to Ambient |
International Journal of Thermal Sciences |
1913 |
2008 |
Satyajit Panda and M. C. Ray |
Nonlinear Finite Element Analysis of Functionally Graded Plates Integrated with Patches of Piezoelectric Fiber Reinforced Composite |
Finite Elements in Analysis and Design |
1914 |
2008 |
R. Tiwari and V. Chakravarthy |
Simultaneous Estimation of the Residual Unbalance and Bearing Dynamic Parameters from the Experimental Data in a Rotor-Bearing System |
Mechanism and Machine Theory |
1915 |
2008 |
R. Ganesh Narayanan, K. Narasimhan |
Influence of weld conditions on the forming limit strains of welded blanks |
Journal of Strain Analysis for Engineering Design |
1916 |
2008 |
A. Banerjee, B. Bhattacharya, and A. K. Mallik |
Large deflection of cantilever Beams with geometric non-linearity: Analytical and numerical approaches |
International Journal of Non-linear Mechanics |
1917 |
2008 |
B. Pratiher and S. K. Dwivedy |
Nonlinear Vibration of a Single Link Viscoelastic Cartesian Manipulator |
International Journal of Nonlinear Mechanics |
1918 |
2008 |
R. Ganesh Narayanan, K. Narasimhan |
Predicting the forming limit strains of tailor welded blanks |
Journal of Strain Analysis for Engineering Design |
1919 |
2008 |
Manas Das, V.K. Jain, P.S. Ghoshdastidar |
Analysis of Magnetorheological Abrasive Flow Finishing (MRAFF) Process |
International Journal of Advanced Manufacturing Technology |
1920 |
2008 |
S. Bag, A. Trivedi and A. De |
Use of multivariate optimization algorithm to develop self-consistent numerical heat transfer model for laser spot welding |
International Journal of Advanced Manufacturing Technology |
1921 |
2008 |
R. Ganesh Narayanan, M. Gopal, A. Rajadurai |
Influence of friction in simple upsetting and prediction of hardness distribution in cold forged product |
Journal of Testing and Evaluation |
1922 |
2008 |
R. Muthukumaran and S.C. Mishra |
Effect of a step short-pulse laser train on an inhomogeneous planar participating medium |
Int. Communications in Heat and Mass Transfer |
1923 |
2008 |
S.C. Mishra, A. Shukla and V. Yadav |
View factor calculation in the 2-D geometries using the collapsed dimension method |
Int. Communications in Heat and Mass Transfer |
1924 |
2008 |
K. Sunil Kumar, R. Tiwari and R. S. Reddy |
Development of an Optimum Design Methodology of Cylindrical Roller Bearing Using Genetic Algorithms. |
International Journal for Computational Methods in Engineering Science and Mechanics |
1925 |
2008 |
Jagu S. Rao and R. Tiwari |
Optimum Design and Analysis of Thrust Magnetic Bearings Using Multi Objective Genetic Algorithms |
International Journal for Computational Methods in Engineering Science and Mechanics |
1926 |
2008 |
P. Mahanta, J.K. Sarmah, P.Kalita, A.Shrivastava |
Parametric study on transesterification process for biodiesel production from pongamiapinnata and Jatrophacurcus oil |
International Energy Journal |
1927 |
2008 |
N. Senthil Kumar and G. Biswas |
A Finite Element Study of the Onset of Vortex Shedding in a Flow Past Two-dimensional Circular Cylinder |
Progress in Computational Fluid Dynamics |
1928 |
2008 |
Kanagaraj S, Guedes RM, Oliveira MSA, Simoes JAO |
Dynamic Mechanical Analysis of Multi-Walled Carbon Nanotube/HDPE Composites |
Journal of Nanoscience and Nano Technology |
1929 |
2008 |
S. S. Panda, D. Chakraborty and S. K. Pal |
Flank Wear Prediction in Drilling using Back Propagation Neural Network and Radial Basis Function Network |
Applied Soft Computing |
1930 |
2008 |
S. k. Dwivedy and Hari Babu Bagudu |
Longitudinal vibration of uniform and non –uniform rods using p-refinement |
Advances in Vibration Engineering |
1931 |
2008 |
Satyajit Panda and M. C. Ray |
Finite Element Analysis for Geometrically Nonlinear Deformations of Smart Functionally Graded Plates Using Vertically Reinforced 1-3 Piezoelectric Composite |
International journal of Mechanics and Materials in Design |
1932 |
2008 |
B. Kaushik, K.S.R.K. Murthy and P.S. Robi |
Determination of strain gage locations for accurate measurement of the opening mode stress intensity factors |
Journal of Mechanics of Materials and Structures |
1933 |
2008 |
S. Swamy, M.V. Srikanth, K.S.R.K. Murthy and P.S. Robi |
Determination of the mode I stress intensity factors of the complex configurations using the strain gages |
Journal of Mechanics of Materials and Structures |
1934 |
2008 |
A.K Sarma ,J.K.Sarmah, L.Barbora, , P.Kalita, S.Chatterjee, P. Mahanta ,P.Goswami |
Recent inventions in biodiesel production and processing - A review |
Recent Patents on Engineering |
1935 |
2008 |
R. Ganesh Narayanan, K. Narasimhan |
Computer Simulation and Validation of Tensile behavior of Tailor welded Blanks (TWB) |
International Journal: Computer and Experimental Simulations in Engineering and Science |
1936 |
2008 |
M. Sivasankar,T. Benarjee, N. Ravikiran, D. Chakraborty and S. K. Dwivedy |
Dynamic stress and Fatigue analysis of artificial hip prosthesis |
Indian Journal of Biomechanics |
1937 |
2008 |
B.B. Sahoo, N. Sahoo, P. Mahanta, L. Borbora, P. Kalita and U.K. Saha |
Performance assessment of a solar still using blackened surface and thermocol insulation |
Renewable Energy |
1938 |
2007 |
S.Garg, S. K. Pal, D. Chakraborty |
Evaluation of the performance of backpropagation and radial basis function neural networks in predicting the drill flank wear |
Neural Computing and Applications |
1939 |
2007 |
S. Kirtania and D. Chakraborty |
Finite Element based Characterization of Carbon Nanotubes |
Journal of Reinforced Plastics and Composites |
1940 |
2007 |
D. Bandopadhya, B. Bhattacharya, A. Dutta |
An Active Vibration Control Strategy for a Flexible Link Using Distributed Ionic Polymer Metal Composites |
Smart Materials and Structures |
1941 |
2007 |
D. Chakraborty |
Delamination of laminated fiber reinforced plastic composites under multiple cylindrical impact |
Materials and Design |
1942 |
2007 |
P. Kumari, J.K. Nath, P.C. Dumir, S. Kapuria |
2D exact solutions for flat hybrid piezoelectric and magnetoelastic angle-ply panels under harmonic load |
Smart Materials and Structures |
1943 |
2007 |
Anil Borah, P.S. Robi, A. Srinivasan |
Synthesis of nano-crystalline rual by mechanical alloying |
Metals and Materials International |
1944 |
2007 |
T. Roy and D. Chakraborty |
Delamination in FRP laminates with holes under transverse impact |
Materials and Design |
1945 |
2007 |
D. Bandopadhya, B. Bhattacharya, A. Dutta |
Modeling of Hybrid Damping Scheme Using Smart Magnetostrictive Composites for Flexible Manipulator |
Journal of Reinforced Plastics and Composites |
1946 |
2007 |
S.R. Hiravennavar, E.G. Tulapurkara, G. Biswas |
A Note on the Flow and Heat Transfer Enhancement in a Channel with Built-in Winglet Pair |
Int. J. Heat and Fluid Flow |
1947 |
2007 |
Muthukumar P, Madhavakrishna U, Dewan A |
Parametric studies on a metal hydride based hydrogen storage device |
Int. J. Hydrogen Energy |
1948 |
2007 |
M. Karthikeyan, R. Tiwari and S. Talukdar |
Crack Localization and Sizing in a Beam Based on the Free and Forced Response Measurements |
Mechanical Systems and Signal Processing |
1949 |
2007 |
N.R. Abburi and U.S. Dixit |
Multi-objective optimization of multipass turning processes |
Int. J. Adv. Manuf. Tech. |
1950 |
2007 |
S.W.J. Welch and G. Biswas |
Direct Simulation of Film Boiling Including Electrohydrodynamic Forces |
Physics of Fluids |
1951 |
2007 |
A. Trivedi, S. Bag and A. De |
Three dimensional transient heat conduction and thermomechanical analysis for laser spot welding using adaptive heat source |
Science and Technology of Welding and Joining |
1952 |
2007 |
DN Basu, S. Bhattacharyya and PK Das |
Effect of Heat Loss to Ambient on Steady-state Behaviour of a Single-phase Natural Circulation Loop |
Applied Thermal Engineering |
1953 |
2007 |
P. Mahanta, S. C. Mishra, and Y. S. Khushwah |
Some studies on fuel characteristics of mesuaferrea |
International Journal of Heat Transfer Engineering |
1954 |
2007 |
Sukhomay Pal, Surjya K. Pal and Arun K. Samantaray |
Radial basis function neural network model based prediction of weld-plate distortion due to pulsed metal inert gas welding |
Science and Technology of Welding and Joining |
1955 |
2007 |
M.Pathak, A.Dewan and A.K.Dass |
Effect of Streamline Curvature on Flow Field of a Turbulent Plane Jet in Cross Flow |
Mechanics Research Communications |
1956 |
2007 |
B. Pratiher and S. K. Dwivedy |
Parametric instability of a cantilever beam with magnetic field and periodic axial load |
Journal of Sound and Vibration |
1957 |
2007 |
S. K. Dwivedy, Kiran C. Sahu and Sk. Babu |
Parametric instability regions of three layered soft-cored sandwich beam using higher order theory |
Journal of Sound and Vibration |
1958 |
2007 |
S. T. Vagge, V. S. Raja, R. Ganesh Narayanan |
Effect of deformation on the electrochemical behavior of hot-dip galvanized steel sheets |
Applied Surface Science |
1959 |
2007 |
A. Garg, P.S. Sastry, M. Pandey, U.S. Dixit, S.K. Gupta |
Numerical simulations and artificial neural network modeling of natural circulation boiling water reactor |
Nuclear Engineering and Design |
1960 |
2007 |
S.C. Mishra and H.K. Roy |
Solving transient conduction-radiation problems using the lattice Boltzmann method and the finite volume method |
Journal of Computational Physics |
1961 |
2007 |
G. Tomar, D. Gerlach, G. Biswas, N. Alleborn, A. Sharma, F. Durst S. W. J. Welch , and A. Delgado |
Two-phase Electrohydrodynamic Simulations Using a Volume of Fluid Approach |
Journal of Computational Physics |
1962 |
2007 |
Mago, P.J., Chamra, L.M., and Somayaji, C. |
Analysis and Optimization of Organic Rankine Cycles |
IMechE Journal of Power and Energy |
1963 |
2007 |
S. Basak, U. S. Dixit and J. P. Davim |
Application of radial basis function neural networks in optimization of hard turning of AISI D2 cold-worked tool steel with a ceramic tool |
Proc. IMechE Part B: J. Engineering Manufacture |
1964 |
2007 |
Biswas Pankaj, Mandal N. R. and Sha O. P. |
Three Dimensional Finite Element Prediction of Transient Thermal History and Residual Deformation due to Line Heating |
Journal of Engineering for the Maritime Environment |
1965 |
2007 |
C. D. Shete, N. K. Chandiramani, and L. I. Librescu |
Optimal Control of Pretwisted Shearable Smart Composite Rotor Blades |
Acta Mechanica |
1966 |
2007 |
D. K. Sarma and U.S. Dixit |
A comparison of dry and air-cooled turning of grey cast iron with mixed oxide ceramic tool |
Journal of Materials Processing Technology |
1967 |
2007 |
G. Tomar, V. Shankar, A. Sharma and G. Biswas |
Electrohydrodynamic Instability of a Confined Viscoelastic Liquid Film |
Journal of Non-Newtonian Fluid Mechanics |
1968 |
2007 |
M. Karthikeyan, R. Tiwari and S. Talukdar |
Development of a Technique to Locate and Quantify a Beam Crack Based on Modal Parameters |
Transactions of ASME, Journal of Vibration and Acoustics |
1969 |
2007 |
K. Arul Prakash, G. Biswas and B.V. Rathish Kumar |
Numerical Prediction of Fluid Flow and Heat Transfer in the Target System of an Axisymmetric Accelerator Driven Subcritical System |
Journal of Heat Transfer (ASME) |
1970 |
2007 |
A. K. De and A. Dalal |
Numerical Study of Laminar Forced Convection Fluid Flow and Heat Transfer From a Triangular Cylinder Placed in a Channel |
Journal of Heat Transfer-Transactions of the ASME |
1971 |
2007 |
De, A. K, and Dalal, A. |
Numerical Study of Forced Convection Fluid Flow and Heat Transfer from a Triangular Cylinder Placed in a Channel |
ASME Journal of Heat Transfer |
1972 |
2007 |
P.R. Parida, R. Raj, Amit Prasad and S.C. Mishra |
Solidification of a semitransparent planar layer subjected to radiative and convective cooling |
Journal of Quantitative Spectroscopy and Radiative Transfer |
1973 |
2007 |
G. Tomar, A. Sharma, V. Shenoy and G. Biswas |
Surface Instability of Confined Elastic Bilayers: Theory and Simulations |
Physical Review E |
1974 |
2007 |
K Arul Prakash, B V Rathish Kumar and G Biswas |
A Numerical Study of the Target System of an ADSS with Different Flow Guides |
PRAMANA |
1975 |
2007 |
Kanagaraj S, Varanda FR, Zhiltsova TV, Oliveira MSA, Simoes JAO |
Mechanical properties of high density polyethylene/carbon nanotube composites |
Composites Science and Technology |
1976 |
2007 |
S. Kakati, P. Mahanta and S. K. Kakoty |
Performance analysis of pressurized kerosene stove with porous medium inserts |
Journal of Scientific and Industrial Research (JSIR) |
1977 |
2007 |
A. K. De and V. Eswaran |
A high-order accurate method for two-dimensional incompressible viscous flows |
International Journal for Numerical Methods in Fluids |
1978 |
2007 |
R. Singh, S.C. Mishra, N.K Roy, N.S. Sekhawat and K. Mitra |
An insight into the modeling of short-pulse laser transport through a participating medium |
Numerical Heat Transfer, Part B |
1979 |
2007 |
R. Singh and S.C. Mishra |
Analysis of radiative heat transfer in a planar participating medium subjected to diffuse and/or collimated radiation – A comparison of the DTM, the DOM and the FVM |
Numerical Heat Transfer, Part A |
1980 |
2007 |
B. Mondal and S.C. Mishra |
Application of the lattice Boltzmann method and discrete ordinate method for solving transient conduction and radiation heat transfer problems |
Numerical Heat Transfer, Part A |
1981 |
2007 |
G. Madhusudhana, G.S.V.L. Narasimham |
Laminar conjugate mixed convection in a vertical channel with heat generating components |
International Journal of Heat and Mass Transfer |
1982 |
2007 |
G.V. Durga Prasad, M. Pandey, M.S. Kalra |
Review of research on flow instabilities in natural circulation boiling systems |
Progress in Nuclear Energy |
1983 |
2007 |
Khoo W.K.S., Kalita K. & Garvey S.D. |
The specific load capacity of radial-flux radial magnetic bearings |
IEEE Transactions on Magnetics |
1984 |
2007 |
S. Gupta, R. Tiwari and S.B. Nair |
Multi-objective Design Optimization of Rolling Bearings using Genetic Algorithms |
Mechanism and Machine Theory |
1985 |
2007 |
B. Pratiher and S. K. Dwivedy |
Nonlinear dynamics of flexible single –link Cartesian Manipulator |
International Journal of Nonlinear Mechanics |
1986 |
2007 |
B. Rajeswara Rao and R. Tiwari |
Optimum Design of Rolling Element Bearings Using Genetic Algorithms |
Mechanism and Machine Theory |
1987 |
2007 |
S. Bag and A. De |
Three dimensional heat transfer modeling of laser beam welding using adaptive volumetric heat source and GA based optimization of absorption coefficient |
Indian Welding Journal |
1988 |
2007 |
N. Sahoo, D.R. Mahapatra, G. Jagadeesh, S. Gopalakrishnan and K.P.J. Reddy |
Design and analysis of a flat accelerometer based force balance for shock tunnel testing |
Measurement |
1989 |
2007 |
Ajit Mujumdar, Masayuki Horio, P. S. Robi, R. Swarnkar, M. Malik |
Experimental investigation and validation of mixing and segregation behavior of granular flow in sectorial container |
Journal of Chemical Engineering of Japan |
1990 |
2007 |
S.K. Gunjal and U.S. Dixit |
Vibration analysis of shape-optimized rotating cantilever beams |
Engineering Optimization |
1991 |
2007 |
Dalal, A., and Das, M. K. |
Flow and Thermal Study of Laminar Natural Convection in a Complicated Cavity Heated from Top with Sinusoidal Temperature and Cooled from Other Sides |
Computers and Fluids |
1992 |
2007 |
P. Mahadevan, U. S. Dixit and P. S. Robi |
Analysis of cold rigid-plastic axisymmetric forging problem by radial basis function collocation method |
Intl. Journal of Advanced Manufacturing Technology |
1993 |
2007 |
S.D. Kore, P.P. Date, S.V. Kulkarni |
Effect of process parameters on electromagnetic impact welding of aluminum sheets |
International Journal of Impact Engineering |
1994 |
2007 |
S. S. Panda, D. Chakraborty and S. K. Pal |
Monitoring of drill flank wear using fuzzy back propagation neural network |
International Journal of Advanced Manufacturing Technology |
1995 |
2007 |
R. Ganesh Narayanan, K. Narasimhan |
Relative effect of material and geometric parameters on the forming behavior of Tailor Welded Blanks (TWB) |
International Journal of Forming Processes |
1996 |
2007 |
V. K. Pantangi, A.S.S.R.K. Kumar, S. C. Mishra and Niranjan Sahoo |
Performance analysis of domestic LPG cooking stoves with porous media |
International Energy Journal |
1997 |
2007 |
M. Kalita and S. K. Kakoty |
Regarding Stability study of circular and non-circular bearings supporting rigid and flexible rotors |
Advances in Vibration Engineering |
1998 |
2007 |
M.C.Borah , P. Mahanta, S.K. Kakoty, U.K. Saha, A.D. Sahasrabudhe |
Study of quality parameters in vermicomposting |
Indian Journal of Biotechnology |
1999 |
2006 |
S Senthilvelan and R Gnanamoorthy |
Fiber Reinforcement in Injection Molded Nylon 6/6 Spur Gears |
Applied Composite Materials |
2000 |
2006 |
Satyajit Panda and M. C. Ray |
Nonlinear analysis of smart functionally graded plates integrated with a layer of piezoelectric fiber reinforced composite |
Smart Materials and Structures |
2001 |
2006 |
Rajkumar MJ, and Saha UK |
Valve Aided Twisted Savonius Rotor |
Journal of Wind Engineering |
2002 |
2006 |
Saha UK, and Rajkumar MJ |
On The Performance Analysis of Savonius Rotor with Twisted Blades |
Renewable Energy |
2003 |
2006 |
N.R.. Abburi and U.S. Dixit |
A knowledge-based system for the prediction of surface roughness in turning process |
Robotics and CIM |
2004 |
2006 |
T. Roy and D. Chakraborty |
Delamination in Hybrid FRP Laminates under Low Velocity Impact |
Journal of Reinforced Plastics and Composites |
2005 |
2006 |
R. Tiwari and N. Dharmaraju |
Development of a condensation scheme for transverse rotational degrees of freedom elimination in identification of beam crack parameters |
Mechanical Systems and Signal Processing |
2006 |
2006 |
S Senthilvelan and R Gnanamoorthy |
Selective Carbon Fiber Reinforced Nylon 66 Spur Gears Development and Performance |
Applied Composite Materials |
2007 |
2006 |
A. K. Singh, S. S. Panda, S. K. Pal and D. Chakraborty |
Drill Wear Prediction using Artificial Neural Network |
International Journal of Advanced Manufacturing Technology |
2008 |
2006 |
N. Gupta, G.R. Chaitanya and S.C. Mishra |
Lattice Boltzmann method applied to variable thermal conductivity conduction and radiation problems |
Journal of Thermophysics and Heat Transfer |
2009 |
2006 |
N. Sahoo, S. Saravanan, G. Jagadeesh and K.P.J. Reddy |
Simultaneous measurement of aerodynamic and heat transfer data for large angle blunt cones in hypersonic shock tunnel |
Academy Proceedings in Engineering Sciences, SADHANA |
2010 |
2006 |
D.K. Sonar, U.S. Dixit and D.K. Ojha |
Application of radial basis function neural network for predicting the surface roughness in turning process |
Int. J. Adv. Manuf. Tech. |
2011 |
2006 |
S Senthilvelan and R Gnanamoorthy |
Effect of Gear Tooth Fillet Radius on the Performance of Injection Molded Nylon 6/6 Gears |
Materials and Design |
2012 |
2006 |
S Senthilvelan and R Gnanamoorthy |
Damping Characteristics of Unreinforced, Glass and Carbon Fiber Reinforced Nylon 6/6 Spur Gears |
Polymer Testing, |
2013 |
2006 |
S Senthilvelan and R Gnanamoorthy |
Effect of Rotational Speed on the Performance of Unreinforced and Glass Fiber Reinforced Nylon 6 Spur Gears |
Materials and Design |
2014 |
2006 |
R. Tiwari and V. Chakravarthy |
Simultaneous Identification of Residual Unbalances and Bearing Dynamic Parameters From Impulse Responses of Rotor-Bearing Systems |
Mechanical Systems and Signal Processing |
2015 |
2006 |
G. Tomar, V. Shankar, S.K. Shukla, A. Sharma, G. Biswas |
Instability and Dynamics of Thin Viscoelastic Liquid Films |
European Physical Journal E |
2016 |
2006 |
K. Arul Prakash, G. Biswas and B.V. Rathish Kumar |
Numerical Simulation of the Target System of an ADSS |
International Journal of Computational Fluid Dynamics |
2017 |
2006 |
Biswas Pankaj, Mandal N. R. and Sha O. P. |
Numerical and ANN prediction of thermal history of Submerged Arc Welding |
Journal of Mechanical Behavior of Materials |
2018 |
2006 |
A.Dewan, M. Pathak and A.K.Dass |
A survey of selected literature on Important flow properties and computational fluid dynamics treatments of incompressible turbulent plane and round jets in quiescent ambient |
Indian Journal of Engineering and Materials Sciences |
2019 |
2006 |
D. Bandopadhya, B. Bhattacharya, A. Dutta |
Active vibration control using Terfenol-D with H-infinity filter |
International Journal of Engineering Modelling |
2020 |
2006 |
N. K. Chandiramani |
Higher-periodic and Aperiodic Stick-slip Dynamics in a Friction Damper |
International Journal of Acoustics and Vibrations |
2021 |
2006 |
Kanagaraj S, Varanda FR, Oliveira MSA, Simoes JAO |
Theoretical model development for nanofluids thermal effectiveness |
Defect and Diffusion Forum |
2022 |
2006 |
N. K. Chandiramani and T. Pothala |
Dynamics of 2-DOF Regenerative Chatter during Turning |
Journal of Sound and Vibration |
2023 |
2006 |
N. K. Chandiramani, K. Srinivasan, and J. Nagendra |
Experimental Study of Stick-Slip Dynamics in a Friction Wedge Damper |
Journal of Sound and Vibration |
2024 |
2006 |
P. Mahanta, S.C. Mishra, Y.S. Kushwah |
An experimental study of Pongamiapinnata L. oil as a diesel substitute |
Part A: Journal of Power and Energy |
2025 |
2006 |
A. K. De and V. Eswaran |
Analysis of a new high resolution upwind compact scheme |
Journal of Computational Physics |
2026 |
2006 |
S. S. Panda, A. K. Singh, D. Chakraborty and S. K. Pal |
Drill Wear Monitoring using Back Propagation Neural Network |
Journal of Materials Processing Technology |
2027 |
2006 |
D. Kumar and U.S. Dixit |
A slab method study of strain hardening and friction effects in cold foil rolling process |
J. Mater. Process. Tech. |
2028 |
2006 |
A. Maheshwari, R.P. Chhabra and G. Biswas |
Effect of Blockage on Drag and Heat Transfer from a Single Sphere and an In-line Array of Three Spheres |
Powder Technology |
2029 |
2006 |
Y. Srinivas, G. Biswas, A.S. Parihar and R. Ranjan |
Large-Eddy Simulation of High Reynolds Number Turbulent Flow Past a Square Cylinder |
Journal of Engineering Mechanics (ASCE) |
2030 |
2006 |
S. R. Deepak and A. Ghosal |
A note on the diagonalizability and the jordan form of the 4 x 4 homogeneous transformation matrix |
Journal of Mechanical Design |
2031 |
2006 |
S. K. Kakoty and V. K. Roy |
Bulk Reaction Modeling of Sound Propagation Through Circular Dissipative Ducts Backed by an Air Gap |
Journal of Vibration and Acoustics, Transactions of the ASME |
2032 |
2006 |
Dalal, A., and Das, M. K. |
Natural Convection in a Cavity with a Wavy Wall Heated from Below and Uniformly Cooled from the Top and Both Sides |
ASME Journal of Heat Transfer |
2033 |
2006 |
U.S. Dixit, R. Kumar and S.K. Dwivedy |
Shape optimization of flexible robotic manipulators |
ASME Journal of Mechanical Design |
2034 |
2006 |
N.A. Krishna and S.C. Mishra |
The discrete transfer method applied to the radiative heat transfer in a variable refractive index semitransparent medium |
Journal of Quantitative Spectroscopy and Radiative Transfer |
2035 |
2006 |
S.C. Mishra, H.K. Roy and N. Misra |
Discrete ordinate method with a new and a simple quadrature scheme |
Journal of Quantitative Spectroscopy and Radiative Transfer |
2036 |
2006 |
D.Sarma, S.C., Mishra, P. Mahanta |
Analysis of collimated radiation in participating media using the discrete transfer method |
Journal of Quantitative Spectroscopy and Radiative Transfer |
2037 |
2006 |
Rahul, G. Sandeep, D. Chakarborty and A Dutta |
Multi-objective Optimization of Hybrid Laminates subjected to Transverse Impact |
Composite Structures |
2038 |
2006 |
A. K. De and A. Dalal |
Numerical simulation of unconfined flow past a triangular cylinder |
International Journal for Numerical Methods in Fluids |
2039 |
2006 |
A. K. De and A. Dalal |
A numerical study of natural convection around a square, horizontal, heated cylinder placed in an enclosure |
International Journal of Heat and Mass Transfer |
2040 |
2006 |
R. Raj, A. Prasad, P.R. Parida and S.C. Mishra |
Analysis of solidification of a semitransparent planar layer using the lattice Boltzmann method and the discrete transfer method |
Numerical Heat Transfer, Part A |
2041 |
2006 |
D. Gerlach, G. Tomar, G. Biswas, and F. Durst |
Comparison of Volume-of- Fluid Methods for Computing Surface Tension-Dominant Two-Phase Flows |
International Journal of Heat and Mass Transfer |
2042 |
2006 |
M. Pathak, A. Dewan and A.K. Dass |
Computational Prediction of a slightly heated turbulent rectangular jet discharged into a narrow channel crossflow using two different turbulence models |
International Journal of Heat and Mass Transfer |
2043 |
2006 |
S.C. Mishra, P. Chug, P. Kumar and K. Mitra |
Development and comparison of the DTM, the DOM and the FVM formulations for the short-pulse laser transport through a participating medium |
International Journal of Heat and Mass Transfer |
2044 |
2006 |
Dalal, A., and Das, M. K. |
Natural Convection in a Rectangular Cavity Heated from Below and Uniformly Cooled from the Top and Both Sides |
Numerical Heat Transfer: Part A |
2045 |
2006 |
S.C. Mishra, N. Kaur and H.K. Roy |
The DOM approach to the collapsed dimension method for solving radiative transport problems with participating media |
International Journal of Heat and Mass Transfer |
2046 |
2006 |
K. Arul Prakash, G. Biswas and B.V. Rathish Kumar |
Thermal Hydraulics of the Spallation Target Module of an Accelerator Driven Sub-critical System: A Numerical Study |
International Journal of Heat and Mass Transfer |
2047 |
2006 |
S Senthilvelan and R Gnanamoorthy |
Influence of Reinforcement on Composite Gear Metrology |
Mechanism and Machine Theory |
2048 |
2006 |
K. Arul Prakash, S. De, B.V. Rathish Kumar and G. Biswas |
A SUPG Finite Element Study of an ADSS |
Finite Element in Analysis and Design |
2049 |
2006 |
S. K. Dwivedy and P. Eberhard |
Dynamic analysis of flexible manipulators, a literature review |
Mechanism and Machine Theory |
2050 |
2006 |
Pradeep Gupta, K. Srinivasan and S.V. Prabhu |
Tests on various configurations of Coriolis mass flowmeters |
Measurement |
2051 |
2006 |
R. Ganesh Narayanan, K. Narasimhan |
Weld region representation during the simulation of TWB forming behavior |
International Journal of Forming Processes |
2052 |
2006 |
V.K. Pantangi and S.C. Mishra |
Combustion of gaseous hydrocarbon fuels within porous media - a review |
Advances in Energy Research |
2053 |
2006 |
P. Mahanta, S.C. Mishra, Y.S. Kushwah |
A comparative study of pongamiapinnata and jatrophacurcus oil as diesel substitute |
International Energy Journal |
2054 |
2006 |
Manas Das, V.K. Jain, P.S. Ghoshdastidar |
Computer Simulation of Nanofinishing Process |
Directions (Quarterly magazine of IIT Kanpur) |
2055 |
2006 |
N. Dharmaraju, R. Tiwari and S. Talukdar |
Identification of an Open Crack Model Parameters in a Cracked Beams |
A Special Issue on Rotor Dynamics of Advances in Vibration Engineering |
2056 |
2006 |
R. Tiwari and N. Dhawade |
Localisation and Criticality of a Crack in an Euler-Benaulli Beam Based on Modal Characteristics |
Advances in Vibration Engineering |
2057 |
2006 |
S.C. Mishra, M. Stevan, S. Nemoda, P. Talukdar, D. Trimis and F. Durst |
Heat transfer analysis of a two-dimensional rectangular porous burner |
Int. Communications in Heat and Mass Transfer |
2058 |
2005 |
D.K. Ojha and U.S. Dixit |
An economic and reliable tool life estimation procedure for turning |
J. Adv. Manuf. Tech. |
2059 |
2005 |
A. Kohli and U.S. Dixit |
A neural network based methodology for prediction of surface roughness in turning process |
Int. J. Adv. Manuf. Tech. |
2060 |
2005 |
Bisht, H., Gupta, J., Pal, S.K. and Chakraborty, D. |
Artificial neural network based prediction of flank wear in turning |
Int. J. Materials and Product Technology |
2061 |
2005 |
R. Tiwari |
Conditioning of Regression Matrices for Simultaneous Estimation of the Residual Unbalance and Bearing Dynamic Parameters |
Mechanical Systems and Signal Processing |
2062 |
2005 |
Muthukumar P, Maiya MP, Murthy SS |
Experiments on metal hydride based hydrogen storage device |
Int. J. Hydrogen Energy |
2063 |
2005 |
D. Chakraborty |
Artificial Neural Network based Delamination Prediction in Laminated Composites |
Materials and Design |
2064 |
2005 |
M. Pathak, A. Dewan and A.K. Dass |
An Assessment of Streamline Curvature Effects on the Mixing Region of a Turbulent Plane Jet in Crossflow |
Applied Mathematical Modelling |
2065 |
2005 |
A. Srivastava, A. Agarwal, D. Chakraborty, A.Dutta |
Control of Smart Laminated FRP Structures using Artificial Neural Network |
Journal of Reinforced Plastics and Composites |
2066 |
2005 |
D. Chakraborty and M. Kumar |
Response of Laminated Composites under Multiple Impact loading |
Journal of Reinforced Plastics and Composites |
2067 |
2005 |
J. Srikanth, E.G. Tulapurkara and G. Biswas |
Large Eddy Simulation of Flow Past Built-In Winglet-Pair in a Rectangular Channel |
International Journal of Fluid Mechanics Research |
2068 |
2005 |
S. K. Pal and D. Chakraborty |
Surface roughness prediction in turning using artificial neural network |
Neural Computing and Applications |
2069 |
2005 |
N. Sahoo, V. Kulkarni, S. Saravanan, G. Jagadeesh and K.P.J. Reddy |
Film cooling effectiveness on a large angle blunt cone flying at hypersonic speed |
Physics of Fluids |
2070 |
2005 |
Muthukumar P, Maiya MP, Murthy SS |
Experiments on a metal hydride based hydrogen compressor |
Int. J. Hydrogen Energy |
2071 |
2005 |
D. Deka, G. Sandeep, D. Chakarborty and A. Dutta |
Multi-objective Optimization of Laminated Composites using Finite Element Method and Genetic Algorithm |
Journal of Reinforced Plastics and Composites |
2072 |
2005 |
S.C. Mishra, P. Talukdar, D. Trimis and F. Durst |
Two-dimensional transient conduction and radiation heat transfer with variable thermal conductivity |
Int. Communications in Heat and Mass Transfer |
2073 |
2005 |
Pathak M, Kumar PS, and Saha UK |
Prediction of Off-Design Characteristics of a Gas Turbine Cycle Using Matching Technique |
International Journal of Turbo & Jet Engines |
2074 |
2005 |
Anil Bora, P.S. Robi, A.Srinivasan and Ajit L Mujumdar |
Processing and characterization of ruthenium aluminide alloys by powder metallurgy and solidification techniques |
Trans. PMAI |
2075 |
2005 |
G. Tomar, G. Biswas, A. Sharma and A. Agrawal |
Numerical Simulation of Bubble Growth in Film Boiling using CLSVOF Method |
Physics of Fluids |
2076 |
2005 |
Mahanta P, Saha UK, Dewan A, Kalita P, and Buragohain B |
Biogas Digester – A Discussion on Factors Affecting Biogas Production and Field Investigation of a Novel Duplex Digester |
Journal of Solar Energy Society of India |
2077 |
2005 |
D.J. Sarma, S.C. Mishra and P. Mahanta |
Analysis of collimated radiation using the discrete transfer method |
Journal of Quantitative Spectroscopy and Radiative Transfer |
2078 |
2005 |
Rahul, D. Chakraborty and A. Dutta |
Optimization of FRP laminated Composites using Island Model Parallel genetic Algorithm |
Composite Science and Technology |
2079 |
2005 |
S Senthilvelan and R Gnanamoorthy |
Reinforced Polymer Gear Fatigue and Failure Analysis |
Transactions Indian Institute of Metals |
2080 |
2005 |
S.C. Mishra, A. Lankadasu and K. Beronov |
Application of the lattice Boltzmann method for solving the energy equation of a 2-D transient conduction-radiation problem |
International Journal of Heat and Mass Transfer |
2081 |
2005 |
Dalal, A., and Das, M. K. |
Laminar Natural Convection in an Inclined Complicated Cavity with Spatially Variable Wall Temperature |
International Journal of Heat and Mass Transfer |
2082 |
2005 |
S. Tiwari, D. Chakraborty, G. Biswas and P.K. Panigrahi |
Numerical Prediction of Flow and Heat Transfer in a Channel in the Presence of a Built-in Circular Tube With and Without Integral Wake Splitter |
International Journal of Heat and Mass Transfer |
2083 |
2005 |
D. Gerlach, G. Biswas, F. Durst and V. Kolobaric |
Quasi-Static Bubble Formation on Submerged Orifices |
International Journal of Heat and Mass Transfer |
2084 |
2005 |
S.C. Mishra and A. Lankadasu |
Analysis of transient conduction and radiation heat transfer using the lattice Boltzmann method and the discrete transfer method |
Numerical Heat Transfer, Part A |
2085 |
2005 |
S.C. Mishra, P. Talukdar, D. Trimis and F. Durst |
Effect of angular quadrature schemes on the computational efficiency of the discrete transfer method for solving radiative transport problems with participating medium |
Numerical Heat Transfer, Part B |
2086 |
2005 |
P. Sahoo, and A. Banerjee |
Asperity interaction in adhesive contact of metallic rough surfaces |
Journal of Physics D: Applied Physics |
2087 |
2005 |
P. Sahoo, and A. Banerjee |
Asperity interaction in elastic–plastic contact of rough surfaces in presence of adhesion |
Journal of Physics D: Applied Physics |
2088 |
2005 |
N. Sahoo, K. Suryavamshi, K. P. J. Reddy and D. J. Mee |
Dynamic force balances for short-duration hypersonic testing facilities |
Experiments in Fluids |
2089 |
2005 |
R. Tiwari, S. Manikandan, S. K. Dwivedy |
A review of the experimental estimation of the rotor-dynamic parameters of seals |
Shock and Vibration Digest |
2090 |
2005 |
K. Senthil Kumar, E. G. Tulapurkara, G. Biswas and B.H.L. Gowda |
Reverse Flow in Channel with Obstruction at Entry |
Fluid Dynamics Research |
2091 |
2005 |
S Senthilvelan and R Gnanamoorthy |
Surface Failure Analysis of Unreinforced ,Glass and Carbon Fiber Reinforced Nylon 6/6 Spur Gears |
International Journal of Plastics Technology |
2092 |
2005 |
Rajkumar MJ, Saha UK, and Maity D |
Simulation of Flow Around and Behind a Savonius Rotor |
International Energy Journal |
2093 |
2005 |
R. Tiwari and V. Reddy |
Estimation of Bearing Dynamic Coefficients using Impulse Responses |
Advances in Vibration Engineering |
2094 |
2005 |
G. Biswas |
Heat Transfer and Fluid Mechanics Related to Turbulent Flow |
Annals of the Indian National Academy of Engineering |
2095 |
2004 |
J. M. Shi, D. Gerlach, M. Breuer, G. Biswas and F. Durst |
Heating Effect on Steady and Unsteady Horizontal Laminar Flow of Air Past a Circular Cylinder |
Physics of Fluids |
2096 |
2004 |
S. Senthilvelan and R. Gnanamoorthy |
Damage Mechanisms in Injection Molded Unreinforced, Glass and Carbon Reinforced Nylon 66 Spur Gears |
Applied Composite Materials |
2097 |
2004 |
M. Kalita and S. K. Kakoty |
Analysis of Whirl Speeds for Rotor-Bearing Systems Supported on Fluid Film Bearings |
Mechanical Systems and Signal Processing |
2098 |
2004 |
N. Dharmaraju, R. Tiwari and S. Talukdar |
Development of a Novel Hybrid Reduction Scheme for Identification of An Open Crack Model in a Beam. |
Mechanical Systems and Signal Processing |
2099 |
2004 |
N. K. Chandiramani, L. I. Librescu, V. Saxena, and A. Kumar |
Optimal Vibration Control of a Rotating Composite Beam with Distributed Piezoelectric Sensing and Actuation |
Smart Materials and Structures |
2100 |
2004 |
B. B. Mahanta, P. Reddy, A. Dutta and D. Chakraborty |
Reliable Computation of Contact Force in FRP Composite Laminates under Transverse Impact |
Shock and Vibration |
2101 |
2004 |
Piyush Gupta, P.S. Robi, P.P. Singha, and A. Srinivasan |
Preparation and Characterization of Ferro-magnetic Shape Memory alloys |
J. of Materials Processing Technology |
2102 |
2004 |
A. Dewan, K. Kalita and A.K. Dass |
Comparison of three Buyoancy Extended Version of the Model in Predicting Turbulent Plane Plume |
Applied Mathematical Modelling |
2103 |
2004 |
U. K. Saha, P. Mahanta, A. S. Grinspan, P. S. Kumar and P. Goswami |
Twisted bamboo bladed rotor for savonius wind turbines |
Journal of Solar Energy Society of India |
2104 |
2004 |
Kulkarni V. N, Kulkarni P. S., Reddy K. P. J., Saito T. and Takayama K. |
Transpiration Cooling Analysis at Hypersonic Mach Numbers Using CFD Tools |
Computational Fluid Dynamics Journal |
2105 |
2004 |
Anil Bora, P.P. Singha, P.S. Robi and A.Srinivasan |
Powder Metallurgy Processing of Ruthenium Aluminium alloys |
J. of Materials Processing Technology |
2106 |
2004 |
S. Chandra and U.S. Dixit |
A rigid-plastic finite element analysis of temper rolling process |
J. Mater. Process. Tech. |
2107 |
2004 |
A. K. De, K. Muralidhar, V. Eswaran, V. K Wadhawan |
Modelling of transport phenomena in a low-pressure CVD reactor |
Journal of Crystal Growth |
2108 |
2004 |
A. Dewan, P. Mahanta ,K.S. Raju, P. Suresh Kumar |
Review of passive heat transfer augmentation techniques |
, Part A:Journal of Power and Energy |
2109 |
2004 |
S. Senthilvelan and R. Gnanamoorthy |
Wear Characteristics of Injection Molded Unfilled and Glass Filled Nylon 6 Spur Gears |
Journal of Engineering Tribology, Proc. of Ins. Mech. E Part J |
2110 |
2004 |
G. Biswas, M. Breuer and F. Durst |
Backward-Facing Step Flows for Various Expansion Ratios at Low and Moderate Reynolds Numbers |
Journal of Fluids Engineering (ASME) |
2111 |
2004 |
D. Agarwal, S.W.J. Welch, G. Biswas, and F. Durst |
Planar Simulation of Bubble Growth in Film Boiling in Near-Critical Water Using a Variant of the VOF Method |
Journal of Heat Transfer (ASME) |
2112 |
2004 |
P. Mahanta and S.C. Mishra |
Exact analysis of radiative transfer problems in long cylindrical enclosures with participating media |
J. of the Institution of Engineers (India), Mechanical Engineering Division |
2113 |
2004 |
P. Talukdar, S.C. Mishra, D. Trimis and F. Durst |
Heat transfer characteristics of a porous radiant burner under the influence of a two-dimensional radiation field |
Journal of Quantitative Spectroscopy and Radiant Transfer |
2114 |
2004 |
P. Mahanta, S.C. Mishra |
Exact analysis of radiative transfer problems in long cylindrical enclosures with participating medium |
Journal of the Institution of Engineers (India): MechanicalEngineering Division |
2115 |
2004 |
B. B. Mahanta, D. Chakraborty and A. Dutta |
Accurate Prediction of Delamination in FRP Composite Laminates Resulting from Transverse Impact |
Composite Science and Technology |
2116 |
2004 |
S. Kumar, K. Srinivasan and D. Chakraborty |
Acoustic Characterization and Prediction of Surface Roughness |
Journal of Materials Processing Technology |
2117 |
2004 |
P. Talukdar, S.C. Mishra, D. Trimis and F. Durst |
Combined radiation and convection heat transfer in a porous channel bounded by isothermal parallel plates |
International Journal of Heat and Mass Transfer |
2118 |
2004 |
J.C. Kalita, A.K. Dass and D.C. Dalal |
An HOC Scheme for Steady Convection-Diffusion for Nonuniform Grids Without Transformation |
International Journal of numerical Methods in Fluids |
2119 |
2004 |
Kanagaraj S, Pattanayak S |
Measurement of the thermal expansion of metals and FRPs Cryogenics |
Cryogenics |
2120 |
2004 |
R. Tiwari, A. W. Lees and M. I. Friswell |
Identification of Dynamic Bearing Parameters: A Review. |
The Shock & Vibration Digest |
2121 |
2004 |
D. V. Ratna Rao, C. S. Babu and S. V. Prabhu |
Effect of turn region treatment on the pressure loss distribution in a smooth square channel with sharp 180º bends |
International Journal of Rotating Machinery |
2122 |
2004 |
D . V. RatnaRao and S. V. Prabhu |
Pressure drop distribution in smooth and rib roughened square channel with sharp 180º bend in the presence of guide vanes |
International Journal of Rotating Machinery |
2123 |
2004 |
A.S.Grinspan, U.K.Saha, P. Mahanta |
Experimental investigation of twisted bladed savonius wind turbine rotor |
International Energy Journal |
2124 |
2004 |
P.Mahanta,A.Dewan, U.K. Saha, P.Kalita, , B.K.Bhatt, D.R. Das |
Field studies of biogas digester with partitioned walls |
International Energy Journal |
2125 |
2003 |
A.K. Saha, G. Biswas and K. Muralidhar |
Three-dimensional Study of Flow Past a Square Cylinder at Low Reynolds Numbers |
Int. J. Heat and Fluid Flow |
2126 |
2003 |
N. Sahoo, D.R. Mahapatra, G. Jagadeesh, S. Gopalakrishnan and K.P.J. Reddy |
An accelerometer balance system for measurement of aerodynamic force coefficients over blunt bodies in a hypersonic shock tunnel |
Measurement Science and Technology |
2127 |
2003 |
U. S. Dixit and S. Chandra |
A neural network based methodology for the prediction of roll force and roll torque in fuzzy form for cold flat rolling process |
Int. J. Adv. Manuf. Tech. |
2128 |
2003 |
S. K. Dwivedy and R. C. Kar |
Nonlinear dynamics of a cantilever beam carrying an attached mass with 1:3:9 internal resonances |
Nonlinear Dynamics |
2129 |
2003 |
S. Kumar, K. Srinivasan and D. Chakraborty |
Acoustic Emission Characterization of Metallic Specimen for crack propagation |
Materials and Design |
2130 |
2003 |
P. Mahanta and S. C. Mishra |
Solution of radiative heat transfer problems in long cylindrical enclosures with participating media |
Sadhana |
2131 |
2003 |
P. Rath, S.C. Mishra, P. Mahanta, U.K. Saha, K. Mitra |
Discrete transfer method applied to transient radiative transfer problems in participating medium |
Numerical Heat Transfer Part A: Applications |
2132 |
2003 |
P.S. Robi and U.S. Dixit |
Application of Neural Network in Generating Processing Maps for Hot Working |
J. of Materials processing Technology |
2133 |
2003 |
K. A. Risbood, U.S. Dixit and A. D. Sahasrabudhe |
Prediction of surface roughness and dimensional deviation by measuring cutting forces and vibrations in turning process |
J. Mater. Process. Tech. |
2134 |
2003 |
A.K. Saha, K. Muralidhar and G. Biswas |
Investigation of Two-and Three Dimensional Models of Transitional Flow Past a Square Cylinder |
Journal of Engineering Mechanics (ASCE) |
2135 |
2003 |
S. Tiwari, G. Biswas, P.L.N. Prasad and S. Basu |
Numerical Prediction of Flow and Heat Transfer in a Rectangular Channel with a Built-in Circular Tube |
Journal of Heat Transfer (ASME) |
2136 |
2003 |
N. Dharmaraju, R. Tiwari and S. Talukdar |
Identification of an Open Crack Model in a Beam Based on Force-Response Measurements. |
Computers & Structures |
2137 |
2003 |
B. Indrajit Sharma, P. S. Robi and A. Srinivasan |
Microhardness of Ternary Vanadium Pentoxide Glasses |
Materials Letters |
2138 |
2003 |
S.C. Mishra, P. Talukdar, D. Trimis and F. Durst |
Computational efficiency improvements of the radiative transfer problems with or without conduction – a comparison of the collapsed dimension method and the discrete transfer method |
International Journal of Heat and Mass Transfer |
2139 |
2003 |
V. Kumar, G. Biswas, G. Brenner and F. Durst |
Effect of Thermocapillary Convection in an Industrial Czochralski Crucible: Numerical Simulation |
International Journal of Heat and Mass Transfer |
2140 |
2003 |
S. Tiwari, D. Maurya, G. Biswas and V. Eswaran |
Heat Transfer Enhancement in Crossflow Heat Exchangers using Oval Tubes and Multiple Delta Winglets |
International Journal of Heat and Mass Transfer |
2141 |
2003 |
N. K. Chandiramani, C. D. Shete, and L. I. Librescu |
Vibration of Higher-Order-Shearable Pretwisted Rotating Composite Blades |
International Journal of Mechanical Sciences |
2142 |
2003 |
V. Prabhakar, G. Biswas, V. Eswaran |
Numerical Prediction of Heat Transfer in a Channel with a Built-in Oval Tube and Various Arrangement of the Vortex Generators |
Numerical Heat Transfer, Part A |
2143 |
2003 |
P. Talukdar and S.C. Mishra |
Transient conduction-radiation interaction in a planar packed bed with variable porosity |
Numerical Heat Transfer, Part A |
2144 |
2003 |
Kanagaraj S, Pattanayak S |
Simultaneous measurements of thermal expansion and thermal conductivity of FRPs by employing a hybrid measuring head on a GM refrigerator |
Cryogenics |
2145 |
2003 |
A. Jain, G. Biswas, D. Maurya |
Winglet Type Vortex Generators with Common-Flow-Up Configuration for Fin-Tube Heat Exchangers |
Numerical Heat Transfer, Part-A |
2146 |
2003 |
P. Mahanta and S.C. Mishra |
Collapsed dimension method applied to radiative transfer problems in complex enclosures with participating medium |
Numerical Heat Transfer, Part B |
2147 |
2003 |
S. K. Dwivedy and R. C. Kar |
Simultaneous combination and 1:3:5 internal resonances in a parametrically excited beam-mass system |
International Journal of Nonlinear Mechanics |
2148 |
2003 |
Chakraborty, V. Kumar, S. B. Nair and R. Tiwari |
Rolling Element Bearing Design Through Genetic Algorithm. |
Engineering Optimization |
2149 |
2003 |
A.K. Pattanaik, P.S. Robi, and A. Srinivasan |
Microhardness of Pb modified Chalcogenide Glasses |
J. Optoelectronics and Advanced Materails |
2150 |
2003 |
S. Tiwari, P.L.N. Prasad and G. Biswas |
A Numerical Study of Heat Transfer in Fin-Tube Heat Exchangers using Winglet-Type Vortex Generators in Common-Flow-Down Configuration |
Progress in Computational Fluid Dynamics |
2151 |
2003 |
T. Cziesla, H. Chattopadhyay, N.K. Mitra and G. Biswas |
Prediction of Heat Transfer from Impinging Knife-Jets Using a Dynamic Subgrid Stress Model |
Progress in Computational Fluid Dynamics |
2152 |
2003 |
S. K. Dwivedy and R. C. Kar |
Nonlinear response of a parametrically excited slender beam carrying a lumped mass with 1:3:9 internal resonance |
Advances in Vibration Engineering |
2153 |
2003 |
N. Satyanarayana and R. Tiwari |
Whirling of A Simple Rotor With Gyroscopic Effects: A Finite Element Approach Based on Complex Co-ordinates |
Advances in Vibration Engineering |
2154 |
2002 |
Muthukumar P, Maiya MP, Murthy SS |
Parametric studies on a metal hydride based single stage hydrogen compressor |
Int. J. Hydrogen Energy |
2155 |
2002 |
D. Chakraborty and B. Pradhan |
Fracture Behaviour of FRP Composite Laminates with Two Interacting Embedded Delaminations at the Interface |
Journal Reinforced Plastics and Composites |
2156 |
2002 |
R. Tiwari, A. W. Lees and M. I. Friswell |
Identification of Speed-Dependent Bearing Parameters |
Journal of Sound and Vibration |
2157 |
2002 |
H. Chattopadhyay, G. Biswas, and N.K. Mitra |
Heat Transfer from a Moving Surface due to Impinging Slot Jets |
Journal of Heat Transfer (ASME) |
2158 |
2002 |
U.S. Dixit, P.S. Robi, D.K. Sharma |
A systematic Procedure for the Design of a Cold Rolling Mill |
J. of Material processing Technology |
2159 |
2002 |
S. K. Kakoty and V. K. Roy |
Bulk Reaction Modeling of Lined Ducts With And Without Mean Flow |
Journal of the Acoustical Society of America |
2160 |
2002 |
P. Talukdar and S.C. Mishra |
Analysis of conduction-radiation problem in absorbing, emitting and anisotropically scattering media using the collapsed dimension method |
International Journal of Heat and Mass Transfer |
2161 |
2002 |
S. K. Kakoty and B. C. Majumdar |
Effect of Fluid Inertia on Stability of Flexibly Supported Oil Journal Bearings: A non-Linear Transient Analysis |
Tribology Transactions |
2162 |
2002 |
S.C. Mishra and M. Prasad |
Radiative heat transfer in absorbing-emitting-scattering gray media inside 1-D gray Cartesian enclosure using the collapsed dimension method |
International Journal of Heat and Mass Transfer |
2163 |
2002 |
V. Prabhakar, G. Biswas, V. Eswaran |
Numerical Prediction of Heat Transfer with a Built-in Oval Tube and Two Different Shaped Vortex Generators |
Numerical Heat Transfer, Part A |
2164 |
2002 |
K. Kalita, A. Dewan and A.K. Dass |
Prediction of Turbulent Plane Jet in Cross-flow |
Numerical Heat Transfer A |
2165 |
2002 |
P. Talukdar and S.C. Mishra |
Transient conduction and radiation heat transfer with Variable thermal conductivity |
Numerical Heat Transfer, Part A |
2166 |
2002 |
J.C. Kalita, D.C. Dalal and A.K. Dass |
A class of Higher Order Compact Schemes for the Unsteady 2D Convection-Diffusion Equation with Variable Coefficients |
International Journal of numerical Methods in Fluids |
2167 |
2002 |
N. K. Chandiramani, L. I. Librescu, and C. D. Shete |
On the Free Vibration of Rotating, Composite Beams Using a Higher-Order Shear Formulation |
Aerospace Science and Technology |
2168 |
2002 |
P. Mahanta, S.C. Mishra |
Collapsed dimension method applied to combined radiative and conductive heat transfer in cylindrical enclosures with participating medium |
Proceedings of the National Heat Transfer Conference |
2169 |
2001 |
T. Cziesla, G. Biswas, H. Chattopadhyay and N.K. Mitra |
Large-Eddy Simulation of Flow and Heat Transfer in an Impinging Slot Jet |
Int. J. Heat and Fluid Flow |
2170 |
2001 |
P. Mahanta and S.C. Mishra |
Modified collapsed dimension method for radiative heat transfer problems |
Journal of Thermophysics and Heat Transfer |
2171 |
2001 |
Kanagaraj S, Pattanayak S |
Measurement of thermal contraction of hybrid composites down to 20K |
Indian Journal of Cryogenics |
2172 |
2001 |
K.S.R.K. Murthy and M. Mukhopadhyay |
Unification of stress intensity factor (SIF) extraction methods with an h-adaptive finite element scheme |
Communications in Numerical Methods in Engineering |
2173 |
2001 |
S. K. Dwivedy and R. C. Kar |
Simultaneous combination, principal parametric and internal resonances in a slender beam with a lumped mass: three mode interactions |
Journal of Sound and Vibration |
2174 |
2001 |
A.K. Saha, G. Biswas, and K. Muralidhar |
Two-Dimensional Study of the Turbulent Wake Behind a Square Cylinder Subject to Uniform Shear |
Journal of Fluids Engineering (ASME) |
2175 |
2001 |
K.S.R.K. Murthy and M Mukhopadhyay |
Adaptive finite element analysis of mixed-mode fracture problems containing multiple crack-tips with an automatic mesh generator |
International Journal of Fracture |
2176 |
2001 |
J.C.Kalita, D.C.Dalal and A.K.Dass |
Fully compact Higher Order Computation of Steady-State Natural Convection in a Square Cavity |
Physical Review E |
2177 |
2001 |
P. Sandilya, D.P. Rao, A. Sharma and G. Biswas |
Gas-Phase Mass Transfer in a Centrifugal Contractor |
Eng. Chem. Res. |
2178 |
2001 |
P. Sandilya, G. Biswas, D.P. Rao and A. Sharma |
Numerical Simulation of the Gas Flow and Mass Transfer Between Two Coaxially Rotating Disks |
Numerical Heat Transfer, Part A |
2179 |
2001 |
P. Talukdar and S.C. Mishra |
Transient conduction and radiation heat transfer with heat generation in a participating medium using the collapsed dimension method |
Numerical Heat Transfer, Part A |
2180 |
2001 |
S. K. Dwivedy and R. C. Kar |
Non-linear dynamics of a slender beam carrying a lumped mass under principal parametric resonances with three-mode interactions |
International Journal of Nonlinear Mechanics |
2181 |
2001 |
Kanagaraj S, Pattanayak S |
Thermal conductivity of carbon fibre reinforced composites |
Indian Journal of Cryogenics |
2182 |
2001 |
Manik Pradhan, Kanagaraj S, Pattanayak S |
Thermal diffusivity of woven fabric glass fibre composites at cryogenic temperature |
Indian Journal of Cryogenics |
2183 |
2000 |
K. Kalita, A. Dewan and A.K. Dass |
Computation of the Turbulent Plane Plume Using Model |
Applied Mathematical Modelling |
2184 |
2000 |
D. Chakraborty and B. Pradhan |
Influence of Interfacial Resin Layer on Delamination Initiation in Broken Ply Composite Laminates |
Journal of Adhesion Sc. and Tech |
2185 |
2000 |
A.K. Saha, K. Muralidhar,and G. Biswas |
Experimental Study of Flow Past a Square Cylinder at high Reynolds Numbers |
Experiments in Fluids |
2186 |
2000 |
A.K. Saha, K. Muralidhar,and G. Biswas |
Vortex Structures and Kinetic Energy Budget in Two-Dimensional flow Past a Square Cylinder |
Computers and Fluids |
2187 |
2000 |
D. Chakraborty and B. Pradhan |
Fracture Behaviour of FRP Composite Laminates with an Embedded Elliptical Delamination at the Interface |
Journal Reinforced Plastics and Composites |
2188 |
2000 |
Vimal Katiyar, M. Ravi Sankar, Arbind Prasad |
Process for the preparation of resorbable polymeric composite U type bone staple |
|
2189 |
2000 |
Vimal Katiyar, M. Ravi Sankar, Arbind Prasad |
Process for the preparation of polymer based Cancellous screws and pins |
|
2190 |
2000 |
Vimal Katiyar, M. Ravi Sankar, Arbind Prasad |
Resorbable cortical screw |
|
2191 |
2000 |
Vimal Katiyar, M. Ravi Sankar, Arbind Prasad |
Resorbable polymer composite bone plate |
|
2192 |
2000 |
Avilash Sahu, S K Dwivedy, P.S. Robi |
Underwater vehicle |
|
2193 |
2000 |
Nandan Kanan Das and Pankaj Biswas, |
Design and development of JIG & FIXTURE for fabrication of cylindrical pin profile of FSW tool of tungsten carbide material using Wire EDM |
|
2194 |
2000 |
U.S. Dixit, A.Ch. Borsaikia, A. Raj |
Autoclaved aerated concrete(aac) block unit comprising in-built anchorage/frog on surface for enhancement of bonding and lateral/shear strength in masonry wall system |
|
2195 |
2000 |
Juan Chowdhury, Gaurav Kumar, Karuna Kalita, Sashindra K Kakoty |
Linear Switched Reluctance Actuator for Powerloom |
|
2196 |
2000 |
Juan Chowdhury, Gaurav Kumar, Karuna Kalita, Sashindra K Kakoty |
High Force Density Quad Air Gap Switched Reluctance Motor |
|
2197 |
2000 |
Gaurav Kumar, Karuna Kalita, Kari Tammi, Seamus D Garvey, WKS Khoo |
Generation of Selective Pole Pair Field and Selective Frequency Transverse Force in Bridge Configured Winding Electrical Machines |
|
2198 |
2000 |
Mishra SC, Pantangi VK. |
Porous Radiant Burner for Domestic LPG Cooking Device with Improved Thermal Efficiency and Reduced Emissions of CO and NOx. Patent Number |
|
2199 |
2000 |
Mishra SC, Niraj Kumar Mishra |
Self-Aspirated LPG Domestic Cooking Stove with a Two-Layer Porous Radiant Burner, |
|
2200 |
2000 |
Mishra SC, Niraj Kumar Mishra and Snehasish Panigrahi |
Medium-Scale Self-Aspirated Improved Air Entrainment LPG Cooking Stove with a Two-Layer Porous Radiant Burner, |
|
2201 |
2000 |
Mishra SC, G.S. Sinha, M Sharma, N Mishra, P. Mahanta, |
Self-Aspirated Pressurized Kerosene Cooking Stove with a Porous Radiant Burner, |
|
2202 |
2000 |
G.S. Sinha, L K Kaushik , M Sharma, N Shanmuga Priya, S Kanagaraj |
Self-Aspirated Pressurized Kerosene Cooking Stove with a Porous Radiant Burner with Nanoparticles blended. |
|
2203 |
2000 |
G.Biswas and P. Deb |
Heat Transfer and Flow Structure in a Turbulent Channel Flow with Embedded Longitudinal Vortices |
Journal of Energy Heat and Mass Transfer |
2204 |
2000 |
Deepak Sharma, Syed Zaheer Basha and Sandula Ajay Kumar, EMO 2019. |
Diversity Over Dominance Approach for Many-Objective Optimization On Reference-Points-based Framework” “In: Deb K. et al. (eds) Evolutionary Multi-Criterion Optimization |
Lecture Notes in Computer Science, 11411, pp 278 – 290. Springer, Cham |
2205 |
2000 |
Subhajit Sanfui and Deepak Sharma |
GPU Acceleration of Local Matrix Generation in FEA by Utilizing Sparsity Pattern |
In 1st International Conference on Mechanical Engineering (INCON 2018), 4–6 January 2018, Jadavpur University, India |
2206 |
2000 |
Rasmi Ranjan Behera, Abhsar Hasan, Lalit Mohan Pandey, M. Ravi Sankar, |
Laser Surface Bio-Coating of Functionally Graded TiO2-HAp on Textured Ti Alloy for Enhancing Bioactivity and Cell Profileration” |
|
2207 |
2000 |
M. Ravi Sankar |
Nano-finishing of Bio-Implants using Polymer Rheological Abrasive Complex Suspensions |
4th International Symposium on Advances in Sustainable Polymers (ASP-2018), 8-11 January, 2018, IIT Guwahati, India |
2208 |
2000 |
CD Nath, SM Hazarika |
‘Diagrams’: A Hybrid Visual Information Representation and Reasoning Paradigm Towards Video Analysis |
International Conference on Theory and Application of Diagrams, 336-345. |
2209 |
2000 |
Bikram P Bhuyan, Arindam Karmakar, Shyamanta M Hazarika, |
Bounding Stability in Formal Concept Analysis, Advanced Computational and Communication |
Paradigms, 2018, pp. 545-552 |
2210 |
2000 |
KS Narkhede, SM Hazarika |
Bionic Reflex Control Strategy for Robotic Finger with Kinematic Constraints |
Proceedings of the 6th International Conference on Control, Mechatronics and Automation, AC |
2211 |
2000 |
D. Shankar, M. Pandey, D.N. Basu |
Coupled-Neutronic-Thermalhydraulic Stability Appraisal of Supercritical Forced Flow Channels Following Lumped Parameter Approach |
Proceedings of 16 International Heat Transfer Conference (IHTC-16), Beijing, China, August 10-15, 2018, Paper ID IHTC16-23961. |
2212 |
2000 |
Sodhi GS, Jaiswala AK, Vigneshwaran K, Muthukumar P |
Investigation of charging and discharging characteristics of a horizontal conical shell and tube latent thermal energy storage device |
Energy Conversion and Management |
2213 |
2000 |
Lakshmi DVN, Muthukumar P, Ekka JP, Nayak PK, Layek A |
Performance Comparison of Mixed Mode and Indirect Mode Parallel Flow Forced Convection Solar Driers for Drying Curcuma Zedoaria, |
J Food Process Engineering |
2214 |
2000 |
Alok Kumar, Nithin N. Raju, Muthukumar P, Vivek Selvan P |
Experimental Studies on Industrial Scale Metal Hydride based Hydrogen Storage System with Embedded Cooling Tubes |
Int J Hydrogen Energy |
2215 |
2000 |
Kiran Naik B, Muthukumar P |
Experimental Investigation and Parametric Studies on Structured Packing chamber based Liquid Desiccant Dehumidification and Regeneration Systems. |
Building and Environment |
2216 |
2000 |
Man Mohana, Vinod Kumar Sharma, Anil Kumar E. Satheesh A, Muthukumar P. |
Performance analysis of metal hydride based simultaneous cooling and heat transformation system |
Int J Hydrogen Energy |
2217 |
2000 |
Muthukumar P, Alok Kumar, Nithin N. Raju, Malleswararao K, Muhammad M. Rahman |
A Critical Review on Design Aspects and Developmental Status of Metal Hydride Based Thermal Machines |
Int J Hydrogen Energy |
2218 |
2000 |
Nithin Narmada Raju, Alok Kumar, Malleswararao K, Muthukumar P |
Parametric Studies on LaNi4.7Al0.3 based Hydrogen Storage Reactor with Embedded Cooling Tubes |
Energy Procedia |
2219 |
2000 |
Lav Kumar Kaushik, Muthukumar P |
Performance Assessment of a Porous Radiant Cook Stove Fueled with Blend of Waste Vegetable Oil (WVO) and Kerosene |
Energy Procedia |
2220 |
2000 |
Sangjukta Devi, Niranjan Sahoo, Muthukumar P |
Combustion of biogas in Porous Radiant Burner: Low emission combustion |
Energy Procedia |
2221 |
2000 |
Gurpreet Singh Sodhi, Vigneshwaran K, Abhishek Kumar Jaiswal, Muthukumar P |
Assessment of Heat Transfer Characteristics of a Latent Heat Thermal Energy Storage System: Multi Tube Design. |
Energy Procedia |
2222 |
2000 |
J.Sunku Prasad, P.Muthukumar, R.Anandalakshmi, HakeemNiyas |
Comparative study of phase change phenomenon in high temperature cascade latent heat energy storage system using conduction and conduction-convection models |
Solar Energy |
2223 |
2000 |
Mallick, D., Poddar, M.K., Mahanta, P. and Moholkar, V.S. |
Discernment of synergism in pyrolysis of biomass blends using thermogravimetric analysis |
|
2224 |
2000 |
P Muthukumar ( Editor) |
International Conference on Advanced Functional Materials 2017 (ICAFM’17), |
Materials today (Elsevier), Volume 5, Issue 6, Part 2, Pages 14215-14638 (2018), |
2225 |
2000 |
Deepak Mylavarapu, Manas Das, Ganesh Narayanan R |
Prediction of Temperature Evolution During Self-Pierced Riveting of Sheets, Book: Handbook of Research on Manufacturing Process Modeling and Optimization Strategies |
IGI Global |
2226 |
2000 |
Niraj Kumar Mishra, Snehasish Panigrahy, Muthukumar P. |
Springer Nature Singapore Pvt Ltds., Book ISBN: 978-981-10-7184-3, pp 209/224. |
Springer |
2227 |
2000 |
Muthukumar P, Hakeem Niyas |
Elsevier, 2018 |
|
2228 |
2000 |
R. Tiwari |
On-Line Identification and Estimation of Non-Linear Stiffness Parameters of Bearings |
Journal of Sound and Vibration |
2229 |
2000 |
S. K. Kakoty and B. C. Majumdar |
Effect of Fluid Inertia on Dynamic Coefficients and Stability of Journal Bearings |
Journal of Engineering Tribology |
2230 |
2000 |
A.K. Saha, K. Muralidhar,and G. Biswas |
Transition and Chaos in Two-Dimensional Flow Past a Square Cylinder |
Journal of Engineering Mechanics (ASCE) |
2231 |
2000 |
U.S. Dixit and P.M. Dixit |
Application of fuzzy set theory in scheduling of tandem rolling mills |
ASME J. Manufact. Sci. Engng |
2232 |
2000 |
S. K. Kakoty and B. C. Majumdar |
Effect of Fluid Inertia on Stability of Oil Journal Bearings |
Journal of Tribology |
2233 |
2000 |
R. Vasudevan, V. Eswaran and G. Biswas |
Winglet Type Vortex Generators for Plate-Fin Heat Exchangers Using Triangular Fins |
Numerical Heat Transfer, Part A |
2234 |
2000 |
P.K. Maji and G. Biswas |
Analysis of Flow in the Plate Spiral of a Reaction Turbine Using a Streamline Upwind Petrov-Galerkin Method |
International Journal for Numerical Methods in Fluids |
2235 |
2000 |
Hakeem N, Muthukumar P |
Springer Proceedings in Energy, DOI 10.1007/978-981-10-4576-9_2 |
Springer Springer Proceedings in Energy |
2236 |
2000 |
Chilaka RCR, Hakeem N, Likhendra P and Muthukumar P |
Springer Proceedings in Energy, DOI 10.1007/978-981-10-4576-9_16. |
Springer Springer Proceedings in Energy |
2237 |
1999 |
S. K. Dwivedy and R. C. Kar |
Nonlinear response of a parametrically excited system using higher order multiple scales |
Nonlinear Dynamics |
2238 |
1999 |
S. K. Kakoty and B. C. Majumdar |
Effect of Fluid Inertia on Stability of Flexibly Supported Oil Journal Bearings: Linear Perturbation Analysis |
Tribology International |
2239 |
1999 |
S. K. Dwivedy and R. C. Kar |
Dynamics of a slender beam with an attached mass under combination parametric and internal resonances |
Part I: steady state response. Journal of Sound and Vibration |
2240 |
1999 |
T. Cziesla, G. Biswas and N.K. Mitra |
Large Eddy Simulation in a Turbulent Channel Flow Using Exit Boundary Conditions |
International Journal for Numerical Methods in Fluids |
2241 |
1999 |
S. K. Dwivedy and R. C. Kar |
Dynamics of a slender beam with an attached mass under combination parametric and internal resonances, Part II: Periodic and Chaotic response |
Journal of Sound and Vibration |
2242 |
1999 |
A.K. Saha, G. Biswas and K. Muralidhar |
Numerical Study of the Turbulent Unsteady Wake Behind a Partially Enclosed Square Cylinder using RANS |
Computer Methods in Applied Mechanics and Engineering |
2243 |
1999 |
A.K. Saha, G. Biswas, and K. Muralidhar |
Influence of Inlet Shear on the Structure of Wake behind a Square Cylinder |
Journal of Engineering Mechanics (ASCE) |
2244 |
1999 |
S.C. Mishra and M. Prasad |
Radiative wall heat fluxes through gray non-isothermal absorbing-emitting media between 1-D concentric cylinders due to various phenomena in Monte Carlo simulation |
J. of the Institution of Engineers (India), Mechanical Engineering Division |
2245 |
1999 |
P.K. Maji and G. Biswas |
Analysis of Flow in the Spiral Casing Using a Streamline Upwind Petrov-Galerkin Method |
International Journal for Numerical Methods in Engineering |
2246 |
1999 |
D. Chakraborty and B. Pradhan |
Effect of Ply Thickness and Fiber Orientation on Delamination Initiation in Broken Ply Composite |
Journal Reinforced Plastics and Composites |
2247 |
1999 |
S. K. Dwivedy and R. C. Kar |
Non-linear dynamics of a slender beam carrying a lumped mass with principal parametric and internal resonances |
International Journal of Nonlinear Mechanics |
2248 |
1999 |
A. A. Bastani Jahromi, N.K. Mitra and G. Biswas |
Numerical Investigations on Enhancement of Heat Transfer in a Compact Fin-and -Tube Heat Exchanger Using Delta Winglet Type Vortex Generators |
Enhanced Heat Transfer |
2249 |
1998 |
D. Chakraborty and B. Pradhan |
Critical Strain Energy Release Rate of Broken Ply Composite Laminates |
Journal Reinforced Plastics and Composites |
2250 |
1998 |
R. Tiwari and N. S. Vyas |
Stiffness Estimation from Random Response in Multi-Mass Rotor Bearing Systems |
Probabilistic Engineering Mechanics |
2251 |
1998 |
S.C. Mishra and M. Prasad |
Radiative heat transfer in participating media – a review |
Sádhana |
2252 |
1998 |
G. Biswas, V. Eswaran, G. Ghai and A. Gupta |
A Numerical Study on Flow Through the Spiral Casing of a Hydraulic Turbine |
International Journal for Numerical Methods in Fluids |
2253 |
1998 |
P.K. Maji and G. Biswas |
Three-dimensional Analysis of Flow in the Spiral Casing of a Reaction Turbine using a Differently Weighted Petrov Galerkin Method |
Computer Methods in Applied Mechanics and Engineering |
2254 |
1998 |
S. Singh, G. Biswas, and A. Mukhopadhyay |
Effect of Thermal Buoyancy on the Flows through a Vertical Channel with a Built-in Circular Cylinder |
Numerical Heat Transfer, Part A |
2255 |
1998 |
A.K. Dass and S.M. Deshpande |
A KFVS-GMRES Hybrid Solution Procedure for Euler Equations |
Computational Fluid Dynamics Journal |
2256 |
1997 |
Saha UK, and Roy B |
Experimental Investigations of Tandem Compressor Cascade Performance at Low Speeds |
Experimental Thermal and Fluid Science |
2257 |
1997 |
R. Tiwari and N. S. Vyas |
Parameter Estimation in Imbalanced Non-Linear Rotor-Bearing Systems from Random Response |
Journal of Sound and Vibration |
2258 |
1997 |
R. Tiwari and N. S. Vyas |
Non-Linear Bearing Stiffness Parameter Extraction From Random Response in Flexible Rotor-Bearing Systems. |
Journal of Sound and Vibration |
2259 |
1997 |
B.L. Owsenek, T. Cziesla, N.K. Mitra and G. Biswas |
Numerical Investigation of Heat Transfer in Impinging Axial and Radial Jets with Superimposed Swirl |
International Journal of Heat and Mass Transfer |
2260 |
1997 |
U.S. Dixit and P.M. Dixit |
Finite element analysis of flat rolling with inclusion of anisotropy |
Int. J. Mech. Sci |
2261 |
1997 |
U.S. Dixit and P.M. Dixit |
A study on residual stresses in rolling |
Int. J. Mach. Tools Manufact. |
2262 |
1996 |
D.A. Blank and S.C. Mishra |
Use of the 2-D collapsed dimension method in gray enclosures with absorbing-emitting-isotropic scattering media in radiative equilibrium |
Numerical Heat Transfer, Part B |
2263 |
1996 |
H. Laschefski, T. Cziesla, G. Biswas and N.K. Mitra |
Numerical Investigation of Heat Transfer by Rows of Rectangular Impinging Jets |
Numerical Heat Transfer, Part A |
2264 |
1996 |
Saha UK, and Roy B |
Development of a New Tandem Cascade for Axial Flow Compressor Applications |
International Journal of Turbo & Jet Engines |
2265 |
1996 |
A.K.Saha, and G.Biswas |
Application of a Multigrid Method for Flows Behind Bluff Bodies in a Channel |
Journal of Institution of Engineers |
2266 |
1996 |
G.Biswas, K.Torii, D.Fujii and K.Nishino |
Numerical Experimental Determination of Flow Structure and Heat Transfer Effects of Longitudinal Vortices in a Channel Flow |
International Journal of Heat and Mass Transfer |
2267 |
1996 |
M.D. Kulkarni, P.S. Robi, R.C. Prasad & P. Ramakrishnan |
Deformation and fracture behaviour of cast and extruded 7075 Al-SiCp composites at room and elevated temperatures |
Materials Transactions, Japan Institute of Materials |
2268 |
1996 |
U.S. Dixit and P.M. Dixit |
A finite element analysis of flat rolling and application of fuzzy set theory |
Int. J. Mach. Tools Manufact. |